[U-Boot] [PATCH 1/4] sf: params: Add IS25LP032 part support
Added support for IS25LP032 flash part.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com --- drivers/mtd/spi/sf_params.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 4a4a3af..184ba9c 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -34,6 +34,9 @@ const struct spi_flash_params spi_flash_params_table[] = { {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, #endif +#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */ + {"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM, 0}, +#endif #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0}, {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM, 0},
Added support for IS25LP064 flash part.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com --- drivers/mtd/spi/sf_params.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 184ba9c..c3c38ee 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -36,6 +36,7 @@ const struct spi_flash_params spi_flash_params_table[] = { #endif #ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */ {"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM, 0}, + {"IS25LP064", 0x9d6017, 0x0, 64 * 1024, 128, RD_NORM, 0}, #endif #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0},
Added support for IS25LP128 flash part.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com --- drivers/mtd/spi/sf_params.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index c3c38ee..bb731ea 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -37,6 +37,7 @@ const struct spi_flash_params spi_flash_params_table[] = { #ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */ {"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM, 0}, {"IS25LP064", 0x9d6017, 0x0, 64 * 1024, 128, RD_NORM, 0}, + {"IS25LP128", 0x9d6018, 0x0, 64 * 1024, 256, RD_NORM, 0}, #endif #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0},
This patch enabled CONFIG_SPI_FLASH_ISSI for qspi on zynq boards.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com --- include/configs/zynq-common.h | 1 + 1 file changed, 1 insertion(+)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index f6dd03b..35a3a0a 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -75,6 +75,7 @@ /* QSPI */ #ifdef CONFIG_ZYNQ_QSPI # define CONFIG_SF_DEFAULT_SPEED 30000000 +# define CONFIG_SPI_FLASH_ISSI # define CONFIG_SPI_FLASH_SPANSION # define CONFIG_SPI_FLASH_STMICRO # define CONFIG_SPI_FLASH_WINBOND
Hi Siva,
On 4 September 2015 at 18:33, Jagan Teki jteki@openedev.com wrote:
Added support for IS25LP032 flash part.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com
Can you test this parts?
drivers/mtd/spi/sf_params.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 4a4a3af..184ba9c 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -34,6 +34,9 @@ const struct spi_flash_params spi_flash_params_table[] = { {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, #endif +#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
{"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM, 0},+#endif #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0}, {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM, 0}, -- 1.9.1
thanks!
Hi Jagan,
-----Original Message----- From: Jagan Teki [mailto:jteki@openedev.com] Sent: Tuesday, September 08, 2015 2:52 PM To: u-boot@lists.denx.de Cc: Jagan Teki; Siva Durga Prasad Paladugu; Michal Simek Subject: Re: [PATCH 1/4] sf: params: Add IS25LP032 part support
Hi Siva,
On 4 September 2015 at 18:33, Jagan Teki jteki@openedev.com wrote:
Added support for IS25LP032 flash part.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com
Can you test this parts?
I can't test this as these parts are not mounted on any of our boards now, but I can say that this won't work straight away and needs another patch I will be sending you soon.
Regards, Siva
drivers/mtd/spi/sf_params.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 4a4a3af..184ba9c 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -34,6 +34,9 @@ const struct spi_flash_params
spi_flash_params_table[] = {
{"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM,SECT_4K},
{"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM,SECT_4K},
#endif +#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
{"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM,0},
+#endif #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM,
0},
{"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM,0},
-- 1.9.1
thanks!
Jagan | openedev.
Hi Siva,
On 14 September 2015 at 11:42, Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com wrote:
Hi Jagan,
-----Original Message----- From: Jagan Teki [mailto:jteki@openedev.com] Sent: Tuesday, September 08, 2015 2:52 PM To: u-boot@lists.denx.de Cc: Jagan Teki; Siva Durga Prasad Paladugu; Michal Simek Subject: Re: [PATCH 1/4] sf: params: Add IS25LP032 part support
Hi Siva,
On 4 September 2015 at 18:33, Jagan Teki jteki@openedev.com wrote:
Added support for IS25LP032 flash part.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com
Can you test this parts?
I can't test this as these parts are not mounted on any of our boards now, but I can say that this won't work straight away and needs another patch I will be sending you soon.
Does this means ISSI must require to set quad, bcz these patches I never enable quad on fast read and page program.
drivers/mtd/spi/sf_params.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 4a4a3af..184ba9c 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -34,6 +34,9 @@ const struct spi_flash_params
spi_flash_params_table[] = {
{"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM,SECT_4K},
{"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM,SECT_4K},
#endif +#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
{"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM,0},
+#endif #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM,
0},
{"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM,0},
-- 1.9.1
thanks!
Jagan | openedev.
Hi Jagan,
-----Original Message----- From: Jagan Teki [mailto:jteki@openedev.com] Sent: Monday, September 14, 2015 12:11 PM To: Siva Durga Prasad Paladugu Cc: u-boot@lists.denx.de; Michal Simek Subject: Re: [PATCH 1/4] sf: params: Add IS25LP032 part support
Hi Siva,
On 14 September 2015 at 11:42, Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com wrote:
Hi Jagan,
-----Original Message----- From: Jagan Teki [mailto:jteki@openedev.com] Sent: Tuesday, September 08, 2015 2:52 PM To: u-boot@lists.denx.de Cc: Jagan Teki; Siva Durga Prasad Paladugu; Michal Simek Subject: Re: [PATCH 1/4] sf: params: Add IS25LP032 part support
Hi Siva,
On 4 September 2015 at 18:33, Jagan Teki jteki@openedev.com wrote:
Added support for IS25LP032 flash part.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Michal Simek michal.simek@xilinx.com
Can you test this parts?
I can't test this as these parts are not mounted on any of our boards now, but I can say that this won't work straight away and needs another
patch I will be sending you soon.
Does this means ISSI must require to set quad, bcz these patches I never enable quad on fast read and page program.
Yeah, I already sent patch to set qeb, this is just for the quad commands to work. Any way I just realized that in your patches , you didn’t enabled quad then its fine. If you enable quad then only the quad enable patch is required, otherwise its fine.
Regards, Siva
drivers/mtd/spi/sf_params.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 4a4a3af..184ba9c 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -34,6 +34,9 @@ const struct spi_flash_params
spi_flash_params_table[] = {
{"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM,SECT_4K},
{"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM,SECT_4K},
#endif +#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
{"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, RD_NORM,0},
+#endif #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM,
0},
{"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM,0},
-- 1.9.1
thanks!
Jagan | openedev.
-- Jagan | openedev.
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
participants (2)
-
Jagan Teki -
Siva Durga Prasad Paladugu