Hi Brian,

we are using a custom board based on IBM walnut with 8 MB flash. The following configuration settings work for us:

TEXT_BASE = 0xFFF80000

#define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFF800000 #define CFG_MONITOR_BASE 0xFFF80000 /* the last two sectors for the bootloader */ #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */

#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */

u-boot must be located in the upper part of the flash because the jump instruction after reset must be within 2MB. CFG_FLASH_CFI is not set in our configuration.

Best regards,

Thomas Schäfer

____________________________________

GIGA STREAM - UMTS Technologies GmbH

Konrad-Zuse-Str. 7 66115 Saarbrücken

Tel.: + 49 (0)681 / 95916 - 203 Fax: + 49 (0)681 / 95916 - 100 E-mail: tschaefer@giga-stream.de