Hi,

I have built the latest mailing u-boot for the Peach Pi (Chromebook 2 13"):

make peach-pi_defconfig; make; mkimage ...; vbutil_kernel ...;

u-boot itself loads fine. I can ext2load the itb file (zImage+DTB), iminfo looks good, but when I issue bootm it shows the image info then hangs forever at:

Starting kernel ...

If I take the same itb file and put it through vbutil_kernel, then dd that onto the kernel partition, that boots fine, which implies that the itb file itself is good.

What am I missing here?

On older devices when I had a problem like this it was due to things like machid not being set correctly. From my understanding, the rough equivalent of this with FDT is that the wrong is being used. Except that the ITB file works when used alone (with vboot headers), it only breaks when being loaded from u-boot.

Could this be caused by the u-boot DTB and the kernel DTB disagreeing? u-boot's exynos5800-peach-pi.dts is not the same as the kernel's exynos5422-peach-pi.dts (ChromeOS 3.8.11 kernel branch doesn't have a exynos5800-peach-pi.dts file, and u-boot doesn't have the exynos5422-peach-pi.dts). Is this the likely cause? What can I do to make this work?

Gordan