On 21 April 2015 at 16:56, Haikun Wang haikun.wang@freescale.com wrote:

Enable Driver Model SPI for ls1021atwr board. DSPI and QSPI only be enabled when boot from QSPI. DSPI and QSPI are compatible under Driver Model SPI.

Signed-off-by: Haikun Wang Haikun.Wang@freescale.com

Reviewed-by: Jagannadha Sutradharudu Teki jagannadh.teki@gmail.com

Changes in v2:

• Move all changes inside of CONFIG_QSPI_BOOT

Changes in v1: None

include/configs/ls1021atwr.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index a13876b..1dd6336 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -228,16 +228,26 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION

-/* QSPI */ +/* SPI */ #ifdef CONFIG_QSPI_BOOT +/* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2

+#define CONFIG_SPI_FLASH_STMICRO

+/* DM SPI */ +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE +#define CONFIG_DM +#define CONFIG_DM_SPI #define CONFIG_CMD_SF +#define CONFIG_DM_SPI_FLASH #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO +#endif #endif

/*

2.1.0.27.g96db324

---

U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

thanks!