[PATCH v3 1/9] board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location, and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson stcarlso@linux.microsoft.com --- board/freescale/common/Kconfig | 6 +++ board/freescale/common/Makefile | 11 ++++++ board/freescale/common/i2c_common.c | 34 +++++++++++++++++ board/freescale/common/i2c_common.h | 30 +++++++++++++++ board/freescale/common/i2c_mux.c | 40 ++++++++++++++++++++ board/freescale/common/i2c_mux.h | 15 ++++++++ board/freescale/common/vid.c | 58 ++++++----------------------- 7 files changed, 148 insertions(+), 46 deletions(-) create mode 100644 board/freescale/common/i2c_common.c create mode 100644 board/freescale/common/i2c_common.h create mode 100644 board/freescale/common/i2c_mux.c create mode 100644 board/freescale/common/i2c_mux.h
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig index 17db755951..ab9c14ae88 100644 --- a/board/freescale/common/Kconfig +++ b/board/freescale/common/Kconfig @@ -21,6 +21,12 @@ config CMD_ESBC_VALIDATE esbc_validate - validate signature using RSA verification esbc_halt - put the core in spin loop (Secure Boot Only)
+config FSL_USE_PCA9547_MUX + bool "Enable PCA9547 I2C Mux on Freescale boards" + default n + help + This option enables the PCA9547 I2C mux on Freescale boards. + config VID depends on DM_I2C bool "Enable Freescale VID" diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 7862a791ac..116c1e71cc 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -15,6 +15,15 @@ ifdef MINIMAL # necessary to create built-in.o obj- := __dummy__.o else +# include i2c_common.o once if either VID or FSL_USE_PCA9547_MUX +I2C_COMMON= +ifdef CONFIG_VID +I2C_COMMON=y +endif +ifdef CONFIG_FSL_USE_PCA9547_MUX +I2C_COMMON=y +endif + obj-$(CONFIG_FSL_CADMUS) += cadmus.o obj-$(CONFIG_FSL_VIA) += cds_via.o obj-$(CONFIG_FMAN_ENET) += fman.o @@ -22,6 +31,8 @@ obj-$(CONFIG_FSL_PIXIS) += pixis.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o endif +obj-$(I2C_COMMON) += i2c_common.o +obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o obj-$(CONFIG_VID) += vid.o obj-$(CONFIG_FSL_QIXIS) += qixis.o obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o diff --git a/board/freescale/common/i2c_common.c b/board/freescale/common/i2c_common.c new file mode 100644 index 0000000000..0f09ed7d34 --- /dev/null +++ b/board/freescale/common/i2c_common.c @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2020-21 NXP + * Copyright 2021 Microsoft Corporation + */ + +#include <common.h> +#include <i2c.h> +#include "i2c_common.h" + +#ifdef CONFIG_DM_I2C + +/* If DM is in use, retrieve the chip for the specified bus number */ +int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev) +{ + int ret = i2c_get_chip_for_busnum(bus, address, 1, dev); + + if (ret) + printf("I2C: Bus %d has no device with address 0x%02X\n", + bus, address); + return ret; +} + +#else + +/* Handle is passed directly */ +int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev) +{ + *dev = address; + return 0; +} + +#endif diff --git a/board/freescale/common/i2c_common.h b/board/freescale/common/i2c_common.h new file mode 100644 index 0000000000..840ad66183 --- /dev/null +++ b/board/freescale/common/i2c_common.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2020-21 NXP + * Copyright 2021 Microsoft Corporation + */ + +#ifndef __NXP_I2C_COMMON_H__ +#define __NXP_I2C_COMMON_H__ + +/* Common functionality shared by the I2C drivers for VID and the mux. */ +#ifdef CONFIG_DM_I2C +#define DEVICE_HANDLE_T struct udevice * + +#define I2C_READ(dev, register, data, length) \ + dm_i2c_read(dev, register, data, length) +#define I2C_WRITE(dev, register, data, length) \ + dm_i2c_write(dev, register, data, length) +#else +#define DEVICE_HANDLE_T int + +#define I2C_READ(dev, register, data, length) \ + i2c_read(dev, register, 1, data, length) +#define I2C_WRITE(dev, register, data, length) \ + i2c_write(dev, register, 1, data, length) +#endif + +int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev); + +#endif diff --git a/board/freescale/common/i2c_mux.c b/board/freescale/common/i2c_mux.c new file mode 100644 index 0000000000..54f89e2576 --- /dev/null +++ b/board/freescale/common/i2c_mux.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2020-21 NXP + * Copyright 2021 Microsoft Corporation + */ + +#include <common.h> +#include <i2c.h> +#include "i2c_common.h" +#include "i2c_mux.h" + +/* + * A new Kconfig option for something that used to always be built should be + * “default y”. + */ +#ifdef CONFIG_FSL_USE_PCA9547_MUX + +int select_i2c_ch_pca9547(u8 ch, int bus) +{ + int ret; + DEVICE_HANDLE_T dev; + + /* Open device handle */ + ret = fsl_i2c_get_device(I2C_MUX_PCA_ADDR_PRI, bus, &dev); + if (ret) { + printf("PCA: No PCA9547 device found\n"); + return ret; + } + + ret = I2C_WRITE(dev, 0, &ch, sizeof(ch)); + if (ret) { + printf("PCA: Unable to select channel %d (%d)\n", (int)ch, ret); + return ret; + } + + return 0; +} + +#endif diff --git a/board/freescale/common/i2c_mux.h b/board/freescale/common/i2c_mux.h new file mode 100644 index 0000000000..0870c1918e --- /dev/null +++ b/board/freescale/common/i2c_mux.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2020-21 NXP + * Copyright 2021 Microsoft Corporation + */ + +#ifndef __NXP_I2C_MUX_H__ +#define __NXP_I2C_MUX_H__ + +#ifdef CONFIG_FSL_USE_PCA9547_MUX +int select_i2c_ch_pca9547(u8 ch, int bus); +#endif + +#endif diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index 13ef101e7f..d2c9bbbfe9 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -20,8 +20,13 @@ #include <asm/immap_85xx.h> #endif #include <linux/delay.h> +#include "i2c_common.h" #include "vid.h"
+#ifndef I2C_VOL_MONITOR_BUS +#define I2C_VOL_MONITOR_BUS 0 +#endif + /* Voltages are generally handled in mV to keep them as integers */ #define MV_PER_V 1000
@@ -95,44 +100,6 @@ u16 __weak soc_get_fuse_vid(int vid_index) #define I2C_VOL_MONITOR_ADDR 0 #endif
-#if CONFIG_IS_ENABLED(DM_I2C) -#define DEVICE_HANDLE_T struct udevice * - -#ifndef I2C_VOL_MONITOR_BUS -#define I2C_VOL_MONITOR_BUS 0 -#endif - -/* If DM is in use, retrieve the udevice chip for the specified bus number */ -static int vid_get_device(int address, DEVICE_HANDLE_T *dev) -{ - int ret = i2c_get_chip_for_busnum(I2C_VOL_MONITOR_BUS, address, 1, dev); - - if (ret) - printf("VID: Bus %d has no device with address 0x%02X\n", - I2C_VOL_MONITOR_BUS, address); - return ret; -} - -#define I2C_READ(dev, register, data, length) \ - dm_i2c_read(dev, register, data, length) -#define I2C_WRITE(dev, register, data, length) \ - dm_i2c_write(dev, register, data, length) -#else -#define DEVICE_HANDLE_T int - -/* If DM is not in use, I2C addresses are passed directly */ -static int vid_get_device(int address, DEVICE_HANDLE_T *dev) -{ - *dev = address; - return 0; -} - -#define I2C_READ(dev, register, data, length) \ - i2c_read(dev, register, 1, data, length) -#define I2C_WRITE(dev, register, data, length) \ - i2c_write(dev, register, 1, data, length) -#endif - #if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \ defined(CONFIG_VOL_MONITOR_IR36021_READ) /* @@ -158,7 +125,7 @@ static int find_ir_chip_on_i2c(void) /* Check all the address */ for (i = 0; i < (sizeof(ir_i2c_addr)/sizeof(ir_i2c_addr[0])); i++) { i2caddress = ir_i2c_addr[i]; - ret = vid_get_device(i2caddress, &dev); + ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (!ret) { ret = I2C_READ(dev, IR36021_MFR_ID_OFFSET, (void *)&mfrID, sizeof(mfrID)); @@ -202,7 +169,7 @@ static int read_voltage_from_INA220(int i2caddress) DEVICE_HANDLE_T dev;
/* Open device handle */ - ret = vid_get_device(i2caddress, &dev); + ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -243,7 +210,7 @@ static int read_voltage_from_IR(int i2caddress) DEVICE_HANDLE_T dev;
/* Open device handle */ - ret = vid_get_device(i2caddress, &dev); + ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -344,7 +311,7 @@ static int read_voltage_from_pmbus(int i2caddress) DEVICE_HANDLE_T dev;
/* Open device handle */ - ret = vid_get_device(i2caddress, &dev); + ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -457,7 +424,7 @@ static int set_voltage_to_IR(int i2caddress, int vdd) DEVICE_HANDLE_T dev;
/* Open device handle */ - ret = vid_get_device(i2caddress, &dev); + ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -503,7 +470,7 @@ static int set_voltage_to_pmbus(int i2caddress, int vdd) DEVICE_HANDLE_T dev;
/* Open device handle */ - ret = vid_get_device(i2caddress, &dev); + ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -653,7 +620,7 @@ int adjust_vdd(ulong vdd_override) debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress); }
- ret = vid_get_device(i2caddress, &dev); + ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -785,7 +752,6 @@ exit: i2c_multiplexer_select_vid_channel(I2C_MUX_CH_DEFAULT);
return ret < 0 ? -1 : 0; - }
static int do_vdd_override(struct cmd_tbl *cmdtp,
-----Original Message----- From: Stephen Carlson stcarlso@linux.microsoft.com Sent: Thursday, July 15, 2021 2:17 AM To: U-Boot Mailing List u-boot@lists.denx.de Cc: Priyanka Jain priyanka.jain@nxp.com Subject: [PATCH v3 1/9] board: freescale: Refactor NXP common mux code
Refactors similar mux code from multiple NXP boards into a common location, and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson stcarlso@linux.microsoft.com
board/freescale/common/Kconfig | 6 +++ board/freescale/common/Makefile | 11 ++++++ board/freescale/common/i2c_common.c | 34 +++++++++++++++++ board/freescale/common/i2c_common.h | 30 +++++++++++++++ board/freescale/common/i2c_mux.c | 40 ++++++++++++++++++++ board/freescale/common/i2c_mux.h | 15 ++++++++ board/freescale/common/vid.c | 58 ++++++----------------------- 7 files changed, 148 insertions(+), 46 deletions(-) create mode 100644 board/freescale/common/i2c_common.c create mode 100644 board/freescale/common/i2c_common.h create mode 100644 board/freescale/common/i2c_mux.c create mode 100644 board/freescale/common/i2c_mux.h
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig index 17db755951..ab9c14ae88 100644 --- a/board/freescale/common/Kconfig +++ b/board/freescale/common/Kconfig @@ -21,6 +21,12 @@ config CMD_ESBC_VALIDATE esbc_validate - validate signature using RSA verification esbc_halt - put the core in spin loop (Secure Boot Only)
+config FSL_USE_PCA9547_MUX
- bool "Enable PCA9547 I2C Mux on Freescale boards"
- default n
- help
This option enables the PCA9547 I2C mux on Freescale boards.config VID depends on DM_I2C bool "Enable Freescale VID" diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 7862a791ac..116c1e71cc 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -15,6 +15,15 @@ ifdef MINIMAL # necessary to create built-in.o obj- := __dummy__.o else +# include i2c_common.o once if either VID or FSL_USE_PCA9547_MUX +I2C_COMMON= ifdef CONFIG_VID I2C_COMMON=y endif ifdef +CONFIG_FSL_USE_PCA9547_MUX I2C_COMMON=y endif
obj-$(CONFIG_FSL_CADMUS) += cadmus.o obj-$(CONFIG_FSL_VIA) += cds_via.o obj-$(CONFIG_FMAN_ENET) += fman.o @@ -22,6 +31,8 @@ obj-$(CONFIG_FSL_PIXIS) += pixis.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o endif +obj-$(I2C_COMMON) += i2c_common.o +obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o obj-$(CONFIG_VID) += vid.o obj-$(CONFIG_FSL_QIXIS) += qixis.o obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o diff --git a/board/freescale/common/i2c_common.c b/board/freescale/common/i2c_common.c new file mode 100644 index 0000000000..0f09ed7d34 --- /dev/null +++ b/board/freescale/common/i2c_common.c @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright 2014 Freescale Semiconductor, Inc.
- Copyright 2020-21 NXP
- Copyright 2021 Microsoft Corporation */
+#include <common.h> +#include <i2c.h> +#include "i2c_common.h"
+#ifdef CONFIG_DM_I2C
+/* If DM is in use, retrieve the chip for the specified bus number */ +int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev) {
- int ret = i2c_get_chip_for_busnum(bus, address, 1, dev);
- if (ret)
printf("I2C: Bus %d has no device with address 0x%02X\n",bus, address);- return ret;
+}
+#else
+/* Handle is passed directly */ +int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev) {
- *dev = address;
- return 0;
+}
+#endif diff --git a/board/freescale/common/i2c_common.h b/board/freescale/common/i2c_common.h new file mode 100644 index 0000000000..840ad66183 --- /dev/null +++ b/board/freescale/common/i2c_common.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright 2014 Freescale Semiconductor, Inc.
- Copyright 2020-21 NXP
- Copyright 2021 Microsoft Corporation */
+#ifndef __NXP_I2C_COMMON_H__ +#define __NXP_I2C_COMMON_H__
+/* Common functionality shared by the I2C drivers for VID and the mux. +*/ #ifdef CONFIG_DM_I2C #define DEVICE_HANDLE_T struct udevice *
+#define I2C_READ(dev, register, data, length) \
- dm_i2c_read(dev, register, data, length) #define I2C_WRITE(dev,
+register, data, length) \
- dm_i2c_write(dev, register, data, length) #else #define
+DEVICE_HANDLE_T int
+#define I2C_READ(dev, register, data, length) \
- i2c_read(dev, register, 1, data, length) #define I2C_WRITE(dev,
+register, data, length) \
- i2c_write(dev, register, 1, data, length) #endif
+int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev);
+#endif diff --git a/board/freescale/common/i2c_mux.c b/board/freescale/common/i2c_mux.c new file mode 100644 index 0000000000..54f89e2576 --- /dev/null +++ b/board/freescale/common/i2c_mux.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright 2014 Freescale Semiconductor, Inc.
- Copyright 2020-21 NXP
- Copyright 2021 Microsoft Corporation */
+#include <common.h> +#include <i2c.h> +#include "i2c_common.h" +#include "i2c_mux.h"
+/*
- A new Kconfig option for something that used to always be built
+should be
- “default y”.
- */
+#ifdef CONFIG_FSL_USE_PCA9547_MUX
+int select_i2c_ch_pca9547(u8 ch, int bus) {
- int ret;
- DEVICE_HANDLE_T dev;
- /* Open device handle */
- ret = fsl_i2c_get_device(I2C_MUX_PCA_ADDR_PRI, bus, &dev);
- if (ret) {
printf("PCA: No PCA9547 device found\n");return ret;- }
- ret = I2C_WRITE(dev, 0, &ch, sizeof(ch));
- if (ret) {
printf("PCA: Unable to select channel %d (%d)\n", (int)ch, ret);return ret;- }
- return 0;
+}
+#endif diff --git a/board/freescale/common/i2c_mux.h b/board/freescale/common/i2c_mux.h new file mode 100644 index 0000000000..0870c1918e --- /dev/null +++ b/board/freescale/common/i2c_mux.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright 2014 Freescale Semiconductor, Inc.
- Copyright 2020-21 NXP
- Copyright 2021 Microsoft Corporation */
+#ifndef __NXP_I2C_MUX_H__ +#define __NXP_I2C_MUX_H__
+#ifdef CONFIG_FSL_USE_PCA9547_MUX +int select_i2c_ch_pca9547(u8 ch, int bus); #endif
+#endif diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index 13ef101e7f..d2c9bbbfe9 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -20,8 +20,13 @@ #include <asm/immap_85xx.h> #endif #include <linux/delay.h> +#include "i2c_common.h" #include "vid.h"
+#ifndef I2C_VOL_MONITOR_BUS +#define I2C_VOL_MONITOR_BUS 0 +#endif
/* Voltages are generally handled in mV to keep them as integers */ #define MV_PER_V 1000
@@ -95,44 +100,6 @@ u16 __weak soc_get_fuse_vid(int vid_index) #define I2C_VOL_MONITOR_ADDR 0 #endif
-#if CONFIG_IS_ENABLED(DM_I2C) -#define DEVICE_HANDLE_T struct udevice *
-#ifndef I2C_VOL_MONITOR_BUS -#define I2C_VOL_MONITOR_BUS 0 -#endif
-/* If DM is in use, retrieve the udevice chip for the specified bus number */ - static int vid_get_device(int address, DEVICE_HANDLE_T *dev) -{
- int ret = i2c_get_chip_for_busnum(I2C_VOL_MONITOR_BUS, address, 1,
dev);
- if (ret)
printf("VID: Bus %d has no device with address 0x%02X\n",I2C_VOL_MONITOR_BUS, address);- return ret;
-}
-#define I2C_READ(dev, register, data, length) \
- dm_i2c_read(dev, register, data, length)
-#define I2C_WRITE(dev, register, data, length) \
- dm_i2c_write(dev, register, data, length)
-#else -#define DEVICE_HANDLE_T int
-/* If DM is not in use, I2C addresses are passed directly */ -static int vid_get_device(int address, DEVICE_HANDLE_T *dev) -{
- *dev = address;
- return 0;
-}
-#define I2C_READ(dev, register, data, length) \
- i2c_read(dev, register, 1, data, length)
-#define I2C_WRITE(dev, register, data, length) \
- i2c_write(dev, register, 1, data, length)
-#endif
#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \ defined(CONFIG_VOL_MONITOR_IR36021_READ) /* @@ -158,7 +125,7 @@ static int find_ir_chip_on_i2c(void) /* Check all the address */ for (i = 0; i < (sizeof(ir_i2c_addr)/sizeof(ir_i2c_addr[0])); i++) { i2caddress = ir_i2c_addr[i];
ret = vid_get_device(i2caddress, &dev);
ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS,&dev); if (!ret) { ret = I2C_READ(dev, IR36021_MFR_ID_OFFSET, (void *)&mfrID, sizeof(mfrID)); @@ -202,7 +169,7 @@ static int read_voltage_from_INA220(int i2caddress) DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
- ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -243,7 +210,7 @@ static int read_voltage_from_IR(int i2caddress) DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
- ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -344,7 +311,7 @@ static int read_voltage_from_pmbus(int i2caddress) DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
- ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -457,7 +424,7 @@ static int set_voltage_to_IR(int i2caddress, int vdd) DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
- ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -503,7 +470,7 @@ static int set_voltage_to_pmbus(int i2caddress, int vdd) DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
- ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -653,7 +620,7 @@ int adjust_vdd(ulong vdd_override) debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress); }
- ret = vid_get_device(i2caddress, &dev);
- ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev); if (ret) return ret;
@@ -785,7 +752,6 @@ exit: i2c_multiplexer_select_vid_channel(I2C_MUX_CH_DEFAULT);
return ret < 0 ? -1 : 0;
}
static int do_vdd_override(struct cmd_tbl *cmdtp,
2.17.1
Stephen,
Can you please check format of all your patches in patch series. They all seems to have one extra space at start of each line content due to this Both git am and patch command fails. Logs below: Kindly correct.
u-boot$ git am v3-1-9-board-freescale-Refactor-NXP-common-mux-code.patch Applying: board: freescale: Refactor NXP common mux code error: board/freescale/common/Kconfig: does not match index error: board/freescale/common/Makefile: does not match index error: board/freescale/common/vid.c: does not match index Patch failed at 0001 board: freescale: Refactor NXP common mux code Use 'git am --show-current-patch' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
u-boot$ patch -p1 < v3-1-9-board-freescale-Refactor-NXP-common-mux-code.patch patching file board/freescale/common/Kconfig Hunk #1 FAILED at 21. 1 out of 1 hunk FAILED -- saving rejects to file board/freescale/common/Kconfig.rej patching file board/freescale/common/Makefile Hunk #1 FAILED at 15. Hunk #2 FAILED at 22. 2 out of 2 hunks FAILED -- saving rejects to file board/freescale/common/Makefile.rej patching file board/freescale/common/i2c_common.c patching file board/freescale/common/i2c_common.h patching file board/freescale/common/i2c_mux.c patching file board/freescale/common/i2c_mux.h patching file board/freescale/common/vid.c Hunk #1 FAILED at 20. Hunk #2 FAILED at 95. Hunk #3 FAILED at 158. Hunk #4 FAILED at 202. Hunk #5 FAILED at 243. Hunk #6 FAILED at 344. Hunk #7 FAILED at 457. Hunk #8 FAILED at 503. Hunk #9 FAILED at 653. Hunk #10 FAILED at 785. 10 out of 10 hunks FAILED -- saving rejects to file board/freescale/common/vid.c.rej u-boot$
Regards Priyanka
participants (2)
-
Priyanka Jain -
Stephen Carlson