Re: [U-Boot] Regarding the PORTING of U-boot to ARM7 based board.
Dear uday bhaskar,
please keep the mailing list on cc:
In message 75bad7120908170826l6c4f494q480208f55ac934bf@mail.gmail.com you wrote:
Actually i have ARM7 based LPC2129 board taken from Emblitz (www.emblitz.com). Board name is EVAT104. My question is
- Is this supports for U-boot.
This board is not supported by the mainline U-Boot code. I have no idea if the vendore provides a port - or somebody else.
- If so, will it be available or will be able to develope using any ARM7
u-boot loader with modifications
It is a pretty straightforward task to port U-Boot to such a board - depending on your experience, of course.
please give me the procedure to downloading and making image and details of tools required. Because i am new to it.
Start reading the README, then the DULG, then the source code.
Or hire an expert.
Best regards,
Wolfgang Denk
On Mon, Aug 17, 2009 at 4:48 PM, Wolfgang Denkwd@denx.de wrote:
Dear uday bhaskar,
please keep the mailing list on cc:
In message 75bad7120908170826l6c4f494q480208f55ac934bf@mail.gmail.com you wrote:
Actually i have ARM7 based LPC2129 board taken from Emblitz (www.emblitz.com). Board name is EVAT104. My question is
- Is this supports for U-boot.
This board is not supported by the mainline U-Boot code. I have no idea if the vendore provides a port - or somebody else.
This is more overblown microcontroller than processor - 16K internal RAM, 256K flash, no expansion bus that I saw. I would look more at RTOS stuff, it would be a better fit.
participants (2)
-
Andrew Dyer -
Wolfgang Denk