Hello Masahiro,

Am 05.02.2015 05:50, schrieb Masahiro Yamada:

If the i2c driver returns an error status, error out immediately. Continuing the loop just results in printing error messages again and again.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Simon Glass sjg@chromium.org Cc: Heiko Schocher hs@denx.de

---

common/cmd_i2c.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)

Applied to u-boot-i2c.git, thanks!

bye, Heiko

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 7c3ad00..12ce3f3 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -518,7 +518,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ret = i2c_read(chip, addr, alen, linebuf, linebytes); #endif if (ret)

• 	i2c_report_err(ret, I2C_ERR_READ);
  

• 	return i2c_report_err(ret, I2C_ERR_READ);
  

  else { printf("%04x:", addr); cp = linebuf;

@@ -616,7 +616,7 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ret = i2c_write(chip, addr++, alen, &byte, 1); #endif if (ret)

• 	i2c_report_err(ret, I2C_ERR_WRITE);
  

• 	return i2c_report_err(ret, I2C_ERR_WRITE);
  

  /*
  • Wait for the write to complete. The write can take
  • up to 10mSec (we allow a little more time).

@@ -798,16 +798,15 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg ret = i2c_read(chip, addr, alen, (uchar *)&data, size); #endif if (ret)

• 	i2c_report_err(ret, I2C_ERR_READ);
  

• else {
  

• 	data = cpu_to_be32(data);
  

• 	if (size == 1)
  

• 		printf(" %02lx", (data >> 24) & 0x000000FF);
  

• 	else if (size == 2)
  

• 		printf(" %04lx", (data >> 16) & 0x0000FFFF);
  

• 	else
  

• 		printf(" %08lx", data);
  

• }
  

• 	return i2c_report_err(ret, I2C_ERR_READ);
  

• data = cpu_to_be32(data);
  

• if (size == 1)
  

• 	printf(" %02lx", (data >> 24) & 0x000000FF);
  

• else if (size == 2)
  

• 	printf(" %04lx", (data >> 16) & 0x0000FFFF);
  

• else
  

• 	printf(" %08lx", data);
  
  

  nbytes = cli_readline(" ? "); if (nbytes == 0) {

@@ -848,7 +847,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg (uchar *)&data, size); #endif if (ret)

• 			i2c_report_err(ret, I2C_ERR_WRITE);
  

• 			return i2c_report_err(ret,
  

• 					      I2C_ERR_WRITE);
  

  #ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); #endif