[U-Boot] USB EHCI driver
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I completed initialization sequence for my SOC EHCI Controller. My scope is to use with mass storage, but I think that ehci core layer don't work correctly. Do somebody use EHCI CORE layer for Mass storage and it was ok?
Thank you.
Hi,
FrancescoVT wrote:
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I completed initialization sequence for my SOC EHCI Controller. My scope is to use with mass storage, but I think that ehci core layer don't work correctly. Do somebody use EHCI CORE layer for Mass storage and it was ok?
Can you report exactly your problem? What happen?
Thank you.
Michael
Hi,
this is the report of my problem. I have initialized the SOC FSL EHCI controller, and I typed usb start from u-boot console. I can see controller and mass storage, but mass storage doesn't seem to be correctly configurated. Can you explain to me what I must expect?
Thank you very much, Francesco.
EHCI SOC FSL: USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0 USB_REQ_SET_ADDRESS Len is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0 USB_REQ_SET_CONFIGURATION Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0 USB_DT_STRING config USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1 USB_DT_STRING config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1 USB_DT_STRING config Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 unknown feature 14 requesttype=23, request=1, value=14, index=1, length=0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 dev=1ffecc58, pipe=80000080, buffer=1ffecd5c, length=8, req=1ffeb1fc req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset
USB device not responding, giving up (status=80000000) usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
Michael Trimarchi-2 wrote:
Hi,
FrancescoVT wrote:
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I completed initialization sequence for my SOC EHCI Controller. My scope is to use with mass storage, but I think that ehci core layer don't work correctly. Do somebody use EHCI CORE layer for Mass storage and it was ok?
Can you report exactly your problem? What happen?
Thank you.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Which SOC you are trying to use? I had faced some more issues while porting the USB core layer related to descriptors also.
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 6:27 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
this is the report of my problem. I have initialized the SOC FSL EHCI controller, and I typed usb start from u-boot console. I can see controller and mass storage, but mass storage doesn't seem to be correctly configurated. Can you explain to me what I must expect?
Thank you very much, Francesco.
EHCI SOC FSL: USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0 USB_REQ_SET_ADDRESS Len is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0 USB_REQ_SET_CONFIGURATION Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0 USB_DT_STRING config USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1 USB_DT_STRING config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1 USB_DT_STRING config Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 unknown feature 14 requesttype=23, request=1, value=14, index=1, length=0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 dev=1ffecc58, pipe=80000080, buffer=1ffecd5c, length=8, req=1ffeb1fc req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset
USB device not responding, giving up (status=80000000)usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
Michael Trimarchi-2 wrote:
Hi,
FrancescoVT wrote:
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I completed initialization sequence for my SOC EHCI Controller. My scope is to use with mass storage, but I think that ehci core layer don't work correctly. Do somebody use EHCI CORE layer for Mass storage and it was ok?
Can you report exactly your problem? What happen?
Thank you.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22599570.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
I have written an initialization sequence for Freescale MPC5121e. This CPU contain an OTG and DR module with UTMI+ phy. I tested Linux USB driver for this controller and it works. Infact I analyzed what Linux driver code did and I applied it to my code in u-boot.
Gupta Maneesh-B18878 wrote:
Which SOC you are trying to use? I had faced some more issues while porting the USB core layer related to descriptors also.
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 6:27 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
this is the report of my problem. I have initialized the SOC FSL EHCI controller, and I typed usb start from u-boot console. I can see controller and mass storage, but mass storage doesn't seem to be correctly configurated. Can you explain to me what I must expect?
Thank you very much, Francesco.
EHCI SOC FSL: USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0 USB_REQ_SET_ADDRESS Len is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0 USB_REQ_SET_CONFIGURATION Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0 USB_DT_STRING config USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1 USB_DT_STRING config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1 USB_DT_STRING config Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 unknown feature 14 requesttype=23, request=1, value=14, index=1, length=0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x8 dev=1ffecc58, pipe=80000080, buffer=1ffecd5c, length=8, req=1ffeb1fc req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset
USB device not responding, giving up (status=80000000)usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
Michael Trimarchi-2 wrote:
Hi,
FrancescoVT wrote:
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I completed initialization sequence for my SOC EHCI Controller. My scope is to use with mass storage, but I think that ehci core layer don't work correctly. Do somebody use EHCI CORE layer for Mass storage and it was ok?
Can you report exactly your problem? What happen?
Thank you.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22599570.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Have you faced any issues w.r.t accessing the root hub Device Descriptors?
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 7:20 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
I have written an initialization sequence for Freescale MPC5121e. This CPU contain an OTG and DR module with UTMI+ phy. I tested Linux USB driver for this controller and it works. Infact I analyzed what Linux driver code did and I applied it to my code in u-boot.
Gupta Maneesh-B18878 wrote:
Which SOC you are trying to use? I had faced some more issues while porting the USB core layer related to descriptors also.
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 6:27 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
this is the report of my problem. I have initialized the SOC FSL EHCI controller, and I typed usb start from u-boot console. I can see controller and mass storage, but mass storage
doesn't seem
to be correctly configurated. Can you explain to me what I must expect?
Thank you very much, Francesco.
EHCI SOC FSL: USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1
index 0x0
length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0
USB_REQ_SET_ADDRESS Len
is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value
0x200 index
0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=512, index=0
USB_DT_CONFIG config
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x200 index
0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0
USB_DT_CONFIG config
get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP
epmaxpacketin[1]
= 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1
index 0x0
length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0
USB_REQ_SET_CONFIGURATION
Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x300 index
0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0
USB_DT_STRING config
USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x301 index
0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1
USB_DT_STRING config
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x302 index
0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1
USB_DT_STRING config
Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value
0x2900 index
0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0
USB_DT_HUB config
usb_control_msg: request: 0x6, requesttype: 0xA0, value
0x2900 index
0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0
USB_DT_HUB config
usb_control_msg: request: 0x0, requesttype: 0xA0, value
0x0 index 0x0
length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value
0x8 index 0x1
length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value
0x4 index 0x1
length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 unknown feature 14 requesttype=23, request=1, value=14, index=1, length=0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x8 dev=1ffecc58, pipe=80000080, buffer=1ffecd5c, length=8, req=1ffeb1fc req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset
USB device not responding, giving up (status=80000000)usb_control_msg: request: 0x1, requesttype: 0x23, value
0x1 index 0x1
length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage
Device(s) found
Michael Trimarchi-2 wrote:
Hi,
FrancescoVT wrote:
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I
completed
initialization sequence for my SOC EHCI Controller. My
scope is to
use with mass storage, but I think that ehci core layer
don't work
correctly. Do somebody use EHCI CORE layer for Mass
storage and it
was ok?
Can you report exactly your problem? What happen?
Thank you.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22599570.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22600620.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
No. I didn't touch the EHCI core layer. I expected that it work. What do you think about?
THANKS.
Regars Francesco
Gupta Maneesh-B18878 wrote:
Have you faced any issues w.r.t accessing the root hub Device Descriptors?
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 7:20 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
I have written an initialization sequence for Freescale MPC5121e. This CPU contain an OTG and DR module with UTMI+ phy. I tested Linux USB driver for this controller and it works. Infact I analyzed what Linux driver code did and I applied it to my code in u-boot.
Gupta Maneesh-B18878 wrote:
Which SOC you are trying to use? I had faced some more issues while porting the USB core layer related to descriptors also.
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 6:27 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
this is the report of my problem. I have initialized the SOC FSL EHCI controller, and I typed usb start from u-boot console. I can see controller and mass storage, but mass storage
doesn't seem
to be correctly configurated. Can you explain to me what I must expect?
Thank you very much, Francesco.
EHCI SOC FSL: USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1
index 0x0
length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0
USB_REQ_SET_ADDRESS Len
is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value
0x200 index
0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=512, index=0
USB_DT_CONFIG config
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x200 index
0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0
USB_DT_CONFIG config
get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP
epmaxpacketin[1]
= 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1
index 0x0
length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0
USB_REQ_SET_CONFIGURATION
Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x300 index
0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0
USB_DT_STRING config
USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x301 index
0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1
USB_DT_STRING config
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x302 index
0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1
USB_DT_STRING config
Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value
0x2900 index
0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0
USB_DT_HUB config
usb_control_msg: request: 0x6, requesttype: 0xA0, value
0x2900 index
0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0
USB_DT_HUB config
usb_control_msg: request: 0x0, requesttype: 0xA0, value
0x0 index 0x0
length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value
0x8 index 0x1
length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value
0x4 index 0x1
length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 unknown feature 14 requesttype=23, request=1, value=14, index=1, length=0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x8 dev=1ffecc58, pipe=80000080, buffer=1ffecd5c, length=8, req=1ffeb1fc req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset
USB device not responding, giving up (status=80000000)usb_control_msg: request: 0x1, requesttype: 0x23, value
0x1 index 0x1
length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage
Device(s) found
Michael Trimarchi-2 wrote:
Hi,
FrancescoVT wrote:
Hi,
I'm developing an USB EHCI driver for ADS5121e. Now , I
completed
initialization sequence for my SOC EHCI Controller. My
scope is to
use with mass storage, but I think that ehci core layer
don't work
correctly. Do somebody use EHCI CORE layer for Mass
storage and it
was ok?
Can you report exactly your problem? What happen?
Thank you.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22599570.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22600620.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
I have integrated last USB u-boot code (2009.03rc) into my code and now I get this:
=> usb start (Re)start USB... USB: USB Init....Completed!
USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0 USB_REQ_SET_ADDRESS Len is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0 USB_REQ_SET_CONFIGURATION Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0 USB_DT_STRING config USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1 USB_DT_STRING config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1 USB_DT_STRING config Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 Len is 0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found =>
Seem to fail usb_get_descriptor..
FrancescoVT wrote:
No. I didn't touch the EHCI core layer. I expected that it work. What do you think about?
THANKS.
Regars Francesco
Gupta Maneesh-B18878 wrote:
Have you faced any issues w.r.t accessing the root hub Device Descriptors?
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 7:20 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
I have written an initialization sequence for Freescale MPC5121e. This CPU contain an OTG and DR module with UTMI+ phy. I tested Linux USB driver for this controller and it works. Infact I analyzed what Linux driver code did and I applied it to my code in u-boot.
Gupta Maneesh-B18878 wrote:
Which SOC you are trying to use? I had faced some more issues while porting the USB core layer related to descriptors also.
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of FrancescoVT Sent: Thursday, March 19, 2009 6:27 PM To: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
this is the report of my problem. I have initialized the SOC FSL EHCI controller, and I typed usb start from u-boot console. I can see controller and mass storage, but mass storage
doesn't seem
to be correctly configurated. Can you explain to me what I must expect?
Thank you very much, Francesco.
EHCI SOC FSL: USB Init....Completed! Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1
index 0x0
length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0
USB_REQ_SET_ADDRESS Len
is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value
0x200 index
0x0 length 0x8 req=6 (0x6), type=128 (0x80), value=512, index=0
USB_DT_CONFIG config
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x200 index
0x0 length 0x19 req=6 (0x6), type=128 (0x80), value=512, index=0
USB_DT_CONFIG config
get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP
epmaxpacketin[1]
= 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1
index 0x0
length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0
USB_REQ_SET_CONFIGURATION
Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x300 index
0x0 length 0xFF req=6 (0x6), type=128 (0x80), value=768, index=0
USB_DT_STRING config
USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x301 index
0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=769, index=1
USB_DT_STRING config
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x302 index
0x1 length 0xFF req=6 (0x6), type=128 (0x80), value=770, index=1
USB_DT_STRING config
Manufacturer u-boot Product EHCI Host Controller SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value
0x2900 index
0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0
USB_DT_HUB config
usb_control_msg: request: 0x6, requesttype: 0xA0, value
0x2900 index
0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0
USB_DT_HUB config
usb_control_msg: request: 0x0, requesttype: 0xA0, value
0x0 index 0x0
length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 usb_control_msg: request: 0x3, requesttype: 0x23, value
0x8 index 0x1
length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 usb_control_msg: request: 0x3, requesttype: 0x23, value
0x4 index 0x1
length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value
0x0 index 0x1
length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x0 req=1 (0x1), type=35 (0x23), value=20, index=1 unknown feature 14 requesttype=23, request=1, value=14, index=1, length=0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x8 dev=1ffecc58, pipe=80000080, buffer=1ffecd5c, length=8, req=1ffeb1fc req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset
USB device not responding, giving up (status=80000000)usb_control_msg: request: 0x1, requesttype: 0x23, value
0x1 index 0x1
length 0x0 req=1 (0x1), type=35 (0x23), value=1, index=1 Len is 0 2 USB Device(s) found scanning bus for storage devices... 0 Storage
Device(s) found
Michael Trimarchi-2 wrote:
Hi,
FrancescoVT wrote: > Hi, > > I'm developing an USB EHCI driver for ADS5121e. Now , I
completed
> initialization sequence for my SOC EHCI Controller. My
scope is to
> use with mass storage, but I think that ehci core layer
don't work
> correctly. Do somebody use EHCI CORE layer for Mass
storage and it
> was ok? > Can you report exactly your problem? What happen? > Thank you. > Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22599570.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- View this message in context: http://www.nabble.com/USB-EHCI-driver-tp22598488p22600620.html Sent from the Uboot - Users mailing list archive at Nabble.com.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
Hi,
I've already tried that define, but nothing is changed... What can I see in the USB driver to resolve issue?
Thanks.
-----Original Message----- From: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Sent: Fri 3/20/2009 9:36 AM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
Hi,
Rendine Francesco wrote:
Hi,
I've already tried that define, but nothing is changed... What can I see in the USB driver to resolve issue?
Thanks.
-----Original Message----- From: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Sent: Fri 3/20/2009 9:36 AM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
Sorry I can't help you without the board :( and now I don't have another board to test to verify it. I'm working on android, and some migor issue.
Michael
Hi Francesco,
Could you make any progress?
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Michael Trimarchi Sent: Monday, March 23, 2009 2:46 PM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
Rendine Francesco wrote:
Hi,
I've already tried that define, but nothing is changed... What can I see in the USB driver to resolve issue?
Thanks.
-----Original Message----- From: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Sent: Fri 3/20/2009 9:36 AM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0
EHCI fail
timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
Sorry I can't help you without the board :( and now I don't have another board to test to verify it. I'm working on android, and some migor issue.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi,
Gupta Maneesh-B18878 wrote:
Hi Francesco,
Could you make any progress?
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Michael Trimarchi Sent: Monday, March 23, 2009 2:46 PM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
Rendine Francesco wrote:
Hi,
I've already tried that define, but nothing is changed... What can I see in the USB driver to resolve issue?
Thanks.
-----Original Message----- From: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Sent: Fri 3/20/2009 9:36 AM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0
EHCI fail
timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
Sorry I can't help you without the board :( and now I don't have another board to test to verify it. I'm working on android, and some migor issue.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
I don't ask anymore because I'm busy, BTW good question
Michael
Hi all,
I'm successful in provide a preliminary support to EHCI USB Freescale controller integrated on ADS5121 platform. I'm preparing a patch to submit to u-boot mailing list.
Regards, Francesco.
-----Messaggio originale----- Da: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Inviato: gio 4/9/2009 7:50 A: Gupta Maneesh-B18878 Cc: Rendine Francesco; u-boot@lists.denx.de Oggetto: Re: [U-Boot] USB EHCI driver
Hi,
Gupta Maneesh-B18878 wrote:
Hi Francesco,
Could you make any progress?
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Michael Trimarchi Sent: Monday, March 23, 2009 2:46 PM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
Rendine Francesco wrote:
Hi,
I've already tried that define, but nothing is changed... What can I see in the USB driver to resolve issue?
Thanks.
-----Original Message----- From: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Sent: Fri 3/20/2009 9:36 AM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0
EHCI fail
timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
Sorry I can't help you without the board :( and now I don't have another board to test to verify it. I'm working on android, and some migor issue.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
I don't ask anymore because I'm busy, BTW good question
Michael
Hi Francesco
Great Job!!! I am in process doing the same for Marvell Kirkwood Hopefully your patch will find useful for me
Regards... Prafulla . .
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Rendine Francesco Sent: Tuesday, June 23, 2009 8:32 PM To: Michael Trimarchi; Gupta Maneesh-B18878 Cc: u-boot@lists.denx.de Subject: [U-Boot] R: USB EHCI driver
Hi all,
I'm successful in provide a preliminary support to EHCI USB Freescale controller integrated on ADS5121 platform. I'm preparing a patch to submit to u-boot mailing list.
Regards, Francesco.
-----Messaggio originale----- Da: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Inviato: gio 4/9/2009 7:50 A: Gupta Maneesh-B18878 Cc: Rendine Francesco; u-boot@lists.denx.de Oggetto: Re: [U-Boot] USB EHCI driver
Hi,
Gupta Maneesh-B18878 wrote:
Hi Francesco,
Could you make any progress?
Regards Maneesh
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Michael
Trimarchi
Sent: Monday, March 23, 2009 2:46 PM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
Rendine Francesco wrote:
Hi,
I've already tried that define, but nothing is changed... What can I see in the USB driver to resolve issue?
Thanks.
-----Original Message----- From: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Sent: Fri 3/20/2009 9:36 AM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value
0x100 index
0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0
EHCI fail
timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
Sorry I can't help you without the board :( and now I don't have another board to test to verify it. I'm working on
android, and some
migor issue.
Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
I don't ask anymore because I'm busy, BTW good question
Michael
Hi Francesco,
I'm successful in provide a preliminary support to EHCI USB Freescale controller integrated on ADS5121 platform. I'm preparing a patch to submit to u-boot mailing list.
Congratulations - I'm also looking forward to see and test the patch on our ads5121.
Cheers Detlev
Hi,
thanks for your compliments, but I think that there is some work to do about this driver to support OTG mode and gadget mode. For now I enabled support to host mode, and from my test does it work.
I'm preparing the patch, and this will carry away some days because usb u-boot source code is been re-organized.. I developed my patch on u-boot 2009.03, so I have to port my job on last u-boot version.
Regards, Francesco
-----Messaggio originale----- Da: Detlev Zundel [mailto:dzu@denx.de] Inviato: mer 6/24/2009 10:51 A: Rendine Francesco Cc: Michael Trimarchi; Gupta Maneesh-B18878; u-boot@lists.denx.de Oggetto: Re: [U-Boot] R: USB EHCI driver
Hi Francesco,
I'm successful in provide a preliminary support to EHCI USB Freescale controller integrated on ADS5121 platform. I'm preparing a patch to submit to u-boot mailing list.
Congratulations - I'm also looking forward to see and test the patch on our ads5121.
Cheers Detlev
All, I'm having trouble resetting my USB (virtual) root port hub following high speed handshake on the 5121e using USB0+UTMI on the mpc5121e. If anyone has any idea why root port hub reset typically fails, please advise. Thanks!
Francesco,
Thank you for your efforts on usb for the 5121e! I took your patch last week and applied it to u-boot-2009.06 the patch wasn't a perfect fit for some reason, but it was easy enough for me to extract the code from your patch file. What version did you intend the patch for, if not u-boot-2009.06?
Regardless, I'm using a custom board based off the the ADS512101 board. I complete your initialization step and it appears I get the 5121e registers mapped correctly. "USB start" looks for devices, and I do see debug output to the console when I have a USB memory stick plugged in.
I also have a USB analyzer, so I can see some action on the bus. However...
It appears I am failing to reset the root port hub after the high-speed handshake between host and device (memory stick).
My degree of USB ignorance is a painful limitation at this point. I'm tripping-through specs, the register set, and getting somewhat familiar with the sequencing, but I'm grinding my gears at this point.
I attach a console log dump. A snippet of the log appears below, showing where/why the reset fails. I also attach a screen snap of my USB analyzer showing that some action is occurring on the wire between the host and the device (memory stick).
This root port hub reset issue appears to be killing any subsequent device discovery efforts. I DID try the hack of ignoring the reset failure to see what happens. In this case I do see "2 devices" detected in the console log (root hub plus my stick I presume), but I see no additional bus traffic on the analyzer so I figure the reset failure is my smoking gun.
Any ideas?
console log snippet (see attached full console log dump)
hub_port_reset: resetting port 0... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 portstatus 101, change 13, 12 Mb/s STAT_C_CONNECTION = 1 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 0 cannot reset port 1!? port 1 reset change usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x 0 req=1 (0x1), type=35 (0x23), value=20, index=1 Len is 0 1 USB Device(s) found scanning bus for storage devices... i=0 i=1 0 Storage Device(s) found =>
FULL LOG...
usb start (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x8 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=5 (0x5), type=0 (0x0), value=1, index=0 USB_REQ_SET_ADDRESS Len is 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0 x12 req=6 (0x6), type=128 (0x80), value=256, index=0 USB_DT_DEVICE request usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x9 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0 x19 req=6 (0x6), type=128 (0x80), value=512, index=0 USB_DT_CONFIG config get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2048 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 req=9 (0x9), type=0 (0x0), value=1, index=0 USB_REQ_SET_CONFIGURATION Len is 0 new device strings: Mfr=1, Product=2, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0 xFF req=6 (0x6), type=128 (0x80), value=768, index=0 USB_DT_STRING config USB device number 1 default language ID 0x1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1 length 0 xFF req=6 (0x6), type=128 (0x80), value=769, index=1 USB_DT_STRING config usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1 length 0 xFF req=6 (0x6), type=128 (0x80), value=770, index=1 USB_DT_STRING config Manufacturer u-boot Product EHCI Host Controller SerialNumber USB hub found usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x8 req=6 (0x6), type=160 (0xa0), value=10496, index=0 USB_DT_HUB config 1 ports detected ganged power switching standalone hub global over-current protection power on to power good time: 510ms hub controller current requirement: 0mA port 1 is removable usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 req=0 (0x0), type=160 (0xa0), value=0, index=0 get_hub_status returned status 1, change 1 local power source is lost (inactive) no over-current condition exists enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=8, index=1 Len is 0 port 1 returns 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 Port 1 Status 101 Change 11 port 1 connection change usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 portstatus 101, change 11, 12 Mb/s usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x1 length 0x 0 req=1 (0x1), type=35 (0x23), value=16, index=1 Len is 0 hub_port_reset: resetting port 0... usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x1 length 0x0 req=3 (0x3), type=35 (0x23), value=4, index=1 Len is 0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 req=0 (0x0), type=163 (0xa3), value=0, index=1 portstatus 101, change 13, 12 Mb/s STAT_C_CONNECTION = 1 STAT_CONNECTION = 1 USB_PORT_STAT_ENABLE 0 cannot reset port 1!? port 1 reset change usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x1 length 0x 0 req=1 (0x1), type=35 (0x23), value=20, index=1 Len is 0 1 USB Device(s) found scanning bus for storage devices... i=0 i=1 0 Storage Device(s) found =>
On Wed, Jun 24, 2009 at 4:08 AM, Rendine Francesco < Francesco.Rendine@valueteam.com> wrote:
Hi,
thanks for your compliments, but I think that there is some work to do about this driver to support OTG mode and gadget mode. For now I enabled support to host mode, and from my test does it work.
I'm preparing the patch, and this will carry away some days because usb u-boot source code is been re-organized.. I developed my patch on u-boot 2009.03, so I have to port my job on last u-boot version.
Regards, Francesco
-----Messaggio originale----- Da: Detlev Zundel [mailto:dzu@denx.de] Inviato: mer 6/24/2009 10:51 A: Rendine Francesco Cc: Michael Trimarchi; Gupta Maneesh-B18878; u-boot@lists.denx.de Oggetto: Re: [U-Boot] R: USB EHCI driver
Hi Francesco,
I'm successful in provide a preliminary support to EHCI USB Freescale controller integrated on ADS5121 platform. I'm preparing a patch to submit to u-boot mailing list.
Congratulations - I'm also looking forward to see and test the patch on our ads5121.
Cheers Detlev
-- More than any other time in history, mankind faces a crossroads. One path leads to despair and utter hopelessness. The other to total extinction. Let us pray, we have the wisdom to choose correctly. -- Woody Allen -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu@denx.de
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Francesco,
Could you send what you have done so far to the list. Someone else might be able to pick it up and figure out what might be wrong.
Thanks John
On Mon, Mar 23, 2009 at 2:44 AM, Rendine Francesco < Francesco.Rendine@valueteam.com> wrote:
Hi,
I've already tried that define, but nothing is changed... What can I see in the USB driver to resolve issue?
Thanks.
-----Original Message----- From: Michael Trimarchi [mailto:trimarchi@gandalf.sssup.it] Sent: Fri 3/20/2009 9:36 AM To: Rendine Francesco Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] USB EHCI driver
Hi,
FrancescoVT wrote:
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 dev=1ffebb08, pipe=88000083, buffer=1f9a671a, length=64, req=1ffea214 req=6 (0x6), type=128 (0x80), value=256 (0x100), index=0 EHCI fail timeout STD_ASS reset usb_new_device: usb_get_descriptor() failed
#define CONFIG_LEGACY_USB_INIT_SEQ
Michael
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
participants (8)
-
Detlev Zundel -
FrancescoVT -
Gupta Maneesh-B18878 -
John Rigby -
Michael Trimarchi -
Mike Timmons -
Prafulla Wadaskar -
Rendine Francesco