[U-Boot] [PATCH v2 0/4] Implement "fastboot flash" for eMMC
This series implements the "fastboot flash" command for eMMC devices. It supports both raw and sparse images.
NOTES: - the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH - the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV - (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
This has been tested on ARMv7.
Changes in v2: - split large function into three - improved handling of response messages - additional partition size checking when writing sparse image - update README.android-fastboot file - new in v2
Steve Rae (4): usb/gadget: fastboot: add sparse image definitions usb/gadget: fastboot: add eMMC support for flash command usb/gadget: fastboot: add support for flash command usb/gadget: fastboot: minor cleanup
README | 10 +++ common/Makefile | 5 ++ common/fb_mmc.c | 189 ++++++++++++++++++++++++++++++++++++++++ doc/README.android-fastboot | 5 +- drivers/usb/gadget/f_fastboot.c | 41 ++++++++- include/fb_mmc.h | 8 ++ include/sparse_format.h | 58 ++++++++++++ 7 files changed, 311 insertions(+), 5 deletions(-) create mode 100644 common/fb_mmc.c create mode 100644 include/fb_mmc.h create mode 100644 include/sparse_format.h
- to prepare for the support of fastboot sparse images
Signed-off-by: Steve Rae srae@broadcom.com --- This file is ASIS from: https://raw.githubusercontent.com/AOSB/android_system_core/master/libsparse/... (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b) except for the __UBOOT__ conditional include.
Changes in v2: None
include/sparse_format.h | 58 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 include/sparse_format.h
diff --git a/include/sparse_format.h b/include/sparse_format.h new file mode 100644 index 0000000..21fbd05 --- /dev/null +++ b/include/sparse_format.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2010 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _LIBSPARSE_SPARSE_FORMAT_H_ +#define _LIBSPARSE_SPARSE_FORMAT_H_ +#define __UBOOT__ +#ifndef __UBOOT__ +#include "sparse_defs.h" +#endif + +typedef struct sparse_header { + __le32 magic; /* 0xed26ff3a */ + __le16 major_version; /* (0x1) - reject images with higher major versions */ + __le16 minor_version; /* (0x0) - allow images with higer minor versions */ + __le16 file_hdr_sz; /* 28 bytes for first revision of the file format */ + __le16 chunk_hdr_sz; /* 12 bytes for first revision of the file format */ + __le32 blk_sz; /* block size in bytes, must be a multiple of 4 (4096) */ + __le32 total_blks; /* total blocks in the non-sparse output image */ + __le32 total_chunks; /* total chunks in the sparse input image */ + __le32 image_checksum; /* CRC32 checksum of the original data, counting "don't care" */ + /* as 0. Standard 802.3 polynomial, use a Public Domain */ + /* table implementation */ +} sparse_header_t; + +#define SPARSE_HEADER_MAGIC 0xed26ff3a + +#define CHUNK_TYPE_RAW 0xCAC1 +#define CHUNK_TYPE_FILL 0xCAC2 +#define CHUNK_TYPE_DONT_CARE 0xCAC3 +#define CHUNK_TYPE_CRC32 0xCAC4 + +typedef struct chunk_header { + __le16 chunk_type; /* 0xCAC1 -> raw; 0xCAC2 -> fill; 0xCAC3 -> don't care */ + __le16 reserved1; + __le32 chunk_sz; /* in blocks in output image */ + __le32 total_sz; /* in bytes of chunk input file including chunk header and data */ +} chunk_header_t; + +/* Following a Raw or Fill or CRC32 chunk is data. + * For a Raw chunk, it's the data in chunk_sz * blk_sz. + * For a Fill chunk, it's 4 bytes of the fill data. + * For a CRC32 chunk, it's 4 bytes of CRC32 + */ + +#endif
On Thu, Jun 26, 2014 at 1:45 PM, Steve Rae srae@broadcom.com wrote:
- to prepare for the support of fastboot sparse images
Signed-off-by: Steve Rae srae@broadcom.com
This file is ASIS from: https://raw.githubusercontent.com/AOSB/android_system_core/master/libsparse/... (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b) except for the __UBOOT__ conditional include.
Changes in v2: None
include/sparse_format.h | 58 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 include/sparse_format.h
diff --git a/include/sparse_format.h b/include/sparse_format.h new file mode 100644 index 0000000..21fbd05 --- /dev/null +++ b/include/sparse_format.h @@ -0,0 +1,58 @@ +/*
- Copyright (C) 2010 The Android Open Source Project
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- */
My understanding is Apache license is not compatible with GPL. There are multiple versions of fastboot files to be found in AOSP with different licenses, so you need to find this with a BSD license. Probably the u-boot (in AOSP) or little-kernel tree has it.
Rob
On Fri, Aug 01, 2014 at 09:42:19AM -0500, Rob Herring wrote:
On Thu, Jun 26, 2014 at 1:45 PM, Steve Rae srae@broadcom.com wrote:
- to prepare for the support of fastboot sparse images
Signed-off-by: Steve Rae srae@broadcom.com
This file is ASIS from: https://raw.githubusercontent.com/AOSB/android_system_core/master/libsparse/... (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b) except for the __UBOOT__ conditional include.
Changes in v2: None
include/sparse_format.h | 58 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 include/sparse_format.h
diff --git a/include/sparse_format.h b/include/sparse_format.h new file mode 100644 index 0000000..21fbd05 --- /dev/null +++ b/include/sparse_format.h @@ -0,0 +1,58 @@ +/*
- Copyright (C) 2010 The Android Open Source Project
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- */
My understanding is Apache license is not compatible with GPL. There are multiple versions of fastboot files to be found in AOSP with different licenses, so you need to find this with a BSD license. Probably the u-boot (in AOSP) or little-kernel tree has it.
You are correct in that Apache-2.0 is not GPL compatible. However (and this question came up inside TI as well), as far as I can tell the sparse file format is NOT available in other licenses (unlike fastboot itself). If anyone out there knows who at Google to ask about getting the file re-licensed that would be great...
- add support for 'fastboot flash' command for eMMC devices
Signed-off-by: Steve Rae srae@broadcom.com --- I suspect that the "sparse image" handling (ie. the "while (remaining_chunks)" loop) has been implemented elsewhere -- I need help finding the original code to determine any licensing issues.... Thanks, Steve
Changes in v2: - split large function into three - improved handling of response messages - additional partition size checking when writing sparse image
common/Makefile | 5 ++ common/fb_mmc.c | 189 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/fb_mmc.h | 8 +++ 3 files changed, 202 insertions(+) create mode 100644 common/fb_mmc.c create mode 100644 include/fb_mmc.h
diff --git a/common/Makefile b/common/Makefile index de5cce8..daebe39 100644 --- a/common/Makefile +++ b/common/Makefile @@ -266,4 +266,9 @@ obj-$(CONFIG_IO_TRACE) += iotrace.o obj-y += memsize.o obj-y += stdio.o
+# This option is not just y/n - it can have a numeric value +ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV +obj-y += fb_mmc.o +endif + CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) diff --git a/common/fb_mmc.c b/common/fb_mmc.c new file mode 100644 index 0000000..4143070 --- /dev/null +++ b/common/fb_mmc.c @@ -0,0 +1,189 @@ +/* + * Copyright TODO + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fb_mmc.h> +#include <mmc.h> +#include <sparse_format.h> + +/* The 64 defined bytes plus \0 */ +#define RESPONSE_LEN (64 + 1) + +static char *response_str; + +static void fastboot_resp(const char *s) +{ + strncpy(response_str, s, RESPONSE_LEN); + response_str[RESPONSE_LEN - 1] = '\0'; +} + +static int is_sparse_image(void *buf) +{ + sparse_header_t *s_header = (sparse_header_t *)buf; + + if ((le32_to_cpu(s_header->magic) == SPARSE_HEADER_MAGIC) && + (le16_to_cpu(s_header->major_version) == 1)) + return 1; + + return 0; +} + +static void write_sparse_image(block_dev_desc_t *mmc_dev, + disk_partition_t *info, const char *part_name, + void *buffer, unsigned int download_bytes) +{ + lbaint_t blk; + lbaint_t blkcnt; + lbaint_t blks; + sparse_header_t *s_header = (sparse_header_t *)buffer; + chunk_header_t *c_header; + void *buf; + uint32_t blk_sz; + uint32_t remaining_chunks; + uint32_t bytes_written = 0; + + blk_sz = le32_to_cpu(s_header->blk_sz); + + /* verify s_header->blk_sz is exact multiple of info->blksz */ + if (blk_sz != (blk_sz & ~(info->blksz - 1))) { + printf("%s: Sparse image block size issue [%u]\n", + __func__, blk_sz); + fastboot_resp("FAILsparse image block size issue"); + return; + } + + if ((le32_to_cpu(s_header->total_blks) * blk_sz) > + (info->size * info->blksz)) { + printf("%s: Sparse image is too large for the partition\n", + __func__); + fastboot_resp("FAILsparse image is too large"); + return; + } + + printf("Flashing Sparse Image\n"); + + remaining_chunks = le32_to_cpu(s_header->total_chunks); + c_header = (chunk_header_t *)(buffer + + le16_to_cpu(s_header->file_hdr_sz)); + blk = info->start; + while (remaining_chunks) { + blkcnt = + (le32_to_cpu(c_header->chunk_sz) * blk_sz) / info->blksz; + + switch (le16_to_cpu(c_header->chunk_type)) { + case CHUNK_TYPE_RAW: + buf = (void *)c_header + + le16_to_cpu(s_header->chunk_hdr_sz); + + if (blk + blkcnt > info->start + info->size) { + printf( + "%s: Request would exceed partition size!\n", + __func__); + fastboot_resp( + "FAILRequest would exceed partition size!"); + return; + } + + blks = mmc_dev->block_write(mmc_dev->dev, blk, blkcnt, + buf); + if (blks != blkcnt) { + printf("%s: Write failed " LBAFU "\n", + __func__, blks); + fastboot_resp("FAILmmc write failure"); + return; + } + + bytes_written += blkcnt * info->blksz; + break; + + case CHUNK_TYPE_FILL: + case CHUNK_TYPE_DONT_CARE: + case CHUNK_TYPE_CRC32: + /* do nothing */ + break; + + default: + /* error */ + printf("%s: Unknown chunk type\n", __func__); + fastboot_resp("FAILunknown chunk type in sparse image"); + return; + } + + blk += blkcnt; + c_header = (chunk_header_t *)((void *)c_header + + le32_to_cpu(c_header->total_sz)); + remaining_chunks--; + } + + printf("........ wrote %u bytes to '%s'\n", bytes_written, part_name); + fastboot_resp("OKAY"); +} + +static void write_raw_image(block_dev_desc_t *mmc_dev, disk_partition_t *info, + const char *part_name, void *buffer, + unsigned int download_bytes) +{ + lbaint_t blkcnt; + lbaint_t blks; + + /* determine number of blocks to write */ + blkcnt = ((download_bytes + (info->blksz - 1)) & ~(info->blksz - 1)); + blkcnt = blkcnt / info->blksz; + + if (blkcnt > info->size) { + printf("%s: too large for partition: '%s'\n", __func__, + part_name); + fastboot_resp("FAILtoo large for partition"); + return; + } + + printf("Flashing Raw Image\n"); + + blks = mmc_dev->block_write(mmc_dev->dev, info->start, blkcnt, buffer); + if (blks != blkcnt) { + printf("%s: failed writing to mmc device %d\n", __func__, + mmc_dev->dev); + fastboot_resp("FAILfailed writing to mmc device"); + return; + } + + printf("........ wrote " LBAFU " bytes to '%s'\n", blkcnt * info->blksz, + part_name); + fastboot_resp("OKAY"); +} + +void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response) +{ + int ret; + block_dev_desc_t *mmc_dev; + disk_partition_t info; + + /* initialize the response buffer */ + response_str = response; + + mmc_dev = mmc_get_dev(CONFIG_FASTBOOT_FLASH_MMC_DEV); + if (!mmc_dev || mmc_dev->type == DEV_TYPE_UNKNOWN) { + printf("%s: invalid mmc device\n", __func__); + fastboot_resp("FAILinvalid mmc device"); + return; + } + + ret = get_partition_info_efi_by_name(mmc_dev, cmd, &info); + if (ret) { + printf("%s: cannot find partition: '%s'\n", __func__, cmd); + fastboot_resp("FAILcannot find partition"); + return; + } + + if (is_sparse_image(download_buffer)) { + write_sparse_image(mmc_dev, &info, cmd, download_buffer, + download_bytes); + } else { + write_raw_image(mmc_dev, &info, cmd, download_buffer, + download_bytes); + } +} diff --git a/include/fb_mmc.h b/include/fb_mmc.h new file mode 100644 index 0000000..1ad1d13 --- /dev/null +++ b/include/fb_mmc.h @@ -0,0 +1,8 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response);
- implement 'fastboot flash' for eMMC devices
Signed-off-by: Steve Rae srae@broadcom.com ---
Changes in v2: - update README.android-fastboot file
README | 10 ++++++++++ doc/README.android-fastboot | 5 +++-- drivers/usb/gadget/f_fastboot.c | 31 +++++++++++++++++++++++++++++++ 3 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/README b/README index fe5cacb..984db6d 100644 --- a/README +++ b/README @@ -1623,6 +1623,16 @@ The following options need to be configured: downloads. This buffer should be as large as possible for a platform. Define this to the size available RAM for fastboot.
+ CONFIG_FASTBOOT_FLASH + The fastboot protocol includes a "flash" command for writing + the downloaded image to a non-volatile storage device. Define + this to enable the "fastboot flash" command. + + CONFIG_FASTBOOT_FLASH_MMC_DEV + The fastboot "flash" command requires addition information + regarding the non-volatile storage device. Define this to + the eMMC device that fastboot should use to store the image. + - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot index f1d128c..430e29c 100644 --- a/doc/README.android-fastboot +++ b/doc/README.android-fastboot @@ -6,8 +6,9 @@ Overview The protocol that is used over USB is described in README.android-fastboot-protocol in same directory.
-The current implementation does not yet support the flash and erase -commands. +The current implementation does not yet support the erase command or the +"oem format" command, and there is minimal support for the flash command; +it only supports eMMC devices.
Client installation =================== diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 9dd85b6..89c2d3e 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -19,6 +19,9 @@ #include <linux/compiler.h> #include <version.h> #include <g_dnl.h> +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV +#include <fb_mmc.h> +#endif
#define FASTBOOT_VERSION "0.4"
@@ -466,6 +469,28 @@ static void cb_boot(struct usb_ep *ep, struct usb_request *req) fastboot_tx_write_str("OKAY"); }
+#ifdef CONFIG_FASTBOOT_FLASH +static void cb_flash(struct usb_ep *ep, struct usb_request *req) +{ + char *cmd = req->buf; + char response[RESPONSE_LEN]; + + strsep(&cmd, ":"); + if (!cmd) { + printf("%s: missing partition name\n", __func__); + fastboot_tx_write_str("FAILmissing partition name"); + return; + } + + strcpy(response, "FAILno flash device defined"); +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV + fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, + download_bytes, response); +#endif + fastboot_tx_write_str(response); +} +#endif + struct cmd_dispatch_info { char *cmd; void (*cb)(struct usb_ep *ep, struct usb_request *req); @@ -485,6 +510,12 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = { .cmd = "boot", .cb = cb_boot, }, +#ifdef CONFIG_FASTBOOT_FLASH + { + .cmd = "flash", + .cb = cb_flash, + }, +#endif };
static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
- update static function - additional debugging statements
Signed-off-by: Steve Rae srae@broadcom.com ---
Changes in v2: - new in v2
drivers/usb/gadget/f_fastboot.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 89c2d3e..3e6e47f 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -293,7 +293,7 @@ static int fastboot_add(struct usb_configuration *c) } DECLARE_GADGET_BIND_CALLBACK(usb_dnl_fastboot, fastboot_add);
-int fastboot_tx_write(const char *buffer, unsigned int buffer_size) +static int fastboot_tx_write(const char *buffer, unsigned int buffer_size) { struct usb_request *in_req = fastboot_func->in_req; int ret; @@ -338,6 +338,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) strcpy(response, "OKAY"); strsep(&cmd, ":"); if (!cmd) { + printf("%s: missing var\n", __func__); fastboot_tx_write_str("FAILmissing var"); return; } @@ -358,6 +359,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) else strcpy(response, "FAILValue not set"); } else { + printf("%s: unknown variable: %s\n", __func__, cmd); strcpy(response, "FAILVariable not implemented"); } fastboot_tx_write_str(response); @@ -531,10 +533,12 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) } }
- if (!func_cb) + if (!func_cb) { + printf("%s: unknown command: %s\n", __func__, cmdbuf); fastboot_tx_write_str("FAILunknown command"); - else + } else { func_cb(ep, req); + }
if (req->status == 0) { *cmdbuf = '\0';
participants (3)
-
Rob Herring -
Steve Rae -
Tom Rini