On Wed, Oct 13, 2004 at 02:41:29PM -0400, Stephen Johnson wrote:

After studying code in rrload and doing some googling, I tried an experiment and it worked. In the file board/omap1510inn/flash.c I changed the function

Based on your previous e-mail (with little to no CFI debug output displayed after explicitly enabling cfi_flash driver debugging as I had recommended : ) I suspected that you may be using that now obsolete board/omap1510inn/flash.c driver instead. It was recently replaced by drivers/cfi_flash.c. Please do a cvs update and retest using the current cfi_flash driver and see if that works. It does seem to work well for me.

-- Regards, George

get_flash_size() so that it now contains the following code:

/* Write auto select command: read Manufacturer ID */ // addr[0x5555] = (FPW) 0x00AA00AA; // addr[0x2AAA] = (FPW) 0x00550055; // addr[0x5555] = (FPW) 0x00900090;

addr[0] = (FPW) 0x00900090;

In other words I got rid of three lines of code and added my own. I can now access -- both read and write -- the flash. My only concern is what have I broken by this change! But for now I'm happy.

Thanks for everyone's help.

            Steve

---

This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users