Switch from 1-bit ecc to 4-bit ecc.

Signed-off-by: Holger Brunck holger.brunck@keymile.com cc: Valentin Longchamp valentin.longchamp@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com --- include/configs/km/km_arm.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index cbf7bc3..766d76e 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -50,6 +50,9 @@

#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD

+#define CONFIG_NAND_ECC_BCH +#define CONFIG_BCH + /* include common defines/options for all Keymile boards */ #include "keymile-common.h"

This board is from a u-boot point of view a mixture between kmnusa and a standard km_kirkwood board. We have our u-boot environment in the spi NOR flash, but we have a direct connection between the kirkwood and the piggy. A FPGA is connected via the PCIe interface. So we only have to select the specific features in the board setup.

Signed-off-by: Holger Brunck holger.brunck@keymile.com cc: Valentin Longchamp valentin.longchamp@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com --- boards.cfg | 1 + include/configs/km_kirkwood.h | 8 ++++++++ 2 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/boards.cfg b/boards.cfg index e4b0d44..19c36a3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -162,6 +162,7 @@ lsxhl arm arm926ejs lsxl buffalo km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI kmnusa arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_NUSA +kmsuv31 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_SUV31 mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN kmcoge5un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_COGE5UN portl2 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_PORTL2 diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 762cc10..83bb7aa 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -98,6 +98,14 @@ #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ #define CONFIG_KM_PIGGY4_88E6061

+/* KM_SUV31 */ +#elif defined(CONFIG_KM_SUV31) +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#define CONFIG_IDENT_STRING "\nKeymile SUV31" +#define CONFIG_HOSTNAME kmsuv31 +#define CONFIG_KM_ENV_IS_IN_SPI_NOR +#define CONFIG_KM_FPGA_CONFIG + #else #error ("Board unsupported") #endif

-----Original Message----- From: Holger Brunck [mailto:holger.brunck@keymile.com] Sent: 16 January 2013 14:21 To: u-boot@lists.denx.de Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar Subject: [PATCH 1/3] arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT

commit 9660e442 cosmetic: s/BOARD_LATE_INIT/CONFIG_BOARD_LATE_INIT removes BOARD_LATE_INIT and uses CONFIG_BOARD_LATE_INIT instead. Therefore we have to use this define.

Signed-off-by: Holger Brunck holger.brunck@keymile.com cc: Valentin Longchamp valentin.longchamp@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com

---

include/configs/km/km_arm.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 549278d..cbf7bc3 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -320,6 +320,6 @@ int get_scl(void); #define CONFIG_CMD_DIAG

/* we do the whole PCIe FPGA config stuff here */ -#define BOARD_LATE_INIT +#define CONFIG_BOARD_LATE_INIT

#endif /* _CONFIG_KM_ARM_H */

Acked-by: Prafulla Wadaskar prafulla@marvell.com Will pull this soon

Regards... Prafulla . . .