Hi Joe,

I'm sending you this snipped of network-related problem (maybe). It's from u- boot IRC.

23:32 < demigod2k> you said a few hours ago to look at PHYLIB 23:32 < demigod2k> it defers the config properly 23:32 < demigod2k> however in drivers/net/phy/marvell.c for example, the values in _config don't belong in that file. they're not universal config. they're different for every board depending how you've hooked up the i/o or strapped the chip 23:33 < demigod2k> so somebody using CONFIG_PHY_MARVELL needs to modify and edit drivers/net/phy/marvell.c with values appropriate to their board 23:33 < demigod2k> no big deal I just did it in my local copy 23:49 < demigod2k> and a related problem -- with new ethernet separation, a register step and a deferred initialization step in eth_init() the variables ethprime and ethact don't work quite right 23:50 < demigod2k> README.drivers.eth doesn't say if you need to check link status in eth_init and rather few of the drivers do it.... but if you don't return an error for "link down" in eth_init the round robin behavior doesn't work and uboot won't cycle through eth0, eth1, eth2, etc.. checking for a link 23:50 < demigod2k> I'm out. Hopefully somebody sees that later!