[PATCH 0/3] initial support for the Videostrong KII Pro
From: Ferass El Hafidi vitali64pmemail@protonmail.com
The Videostrong KII Pro is a set-top box based on the Amlogic p201 reference board and with the following specification:
- Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz - ARM Mali 450 GPU - 2GB DDR3 SDRAM - 16GB eMMC - Gigabit Ethernet - Boardcom BCM4335 WiFi and BT 4.0 - HDMI 2.0 4K/60Hz display - 3x USB 2.0 host - 1x USB 2.0 otg - microSD - Infrared receiver - Blue LED - Red LED - Power button (case, front) - Reset button (underside) - DVB Card: DVB-S and DVB-T/C
Ferass El Hafidi (3): arm: dts: add support for Videostrong KII Pro boards: amlogic: add KII Pro defconfig doc: boards: amlogic: add documentation for KII Pro
arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-gxbb-kii-pro-u-boot.dtsi | 13 ++ arch/arm/dts/meson-gxbb-kii-pro.dts | 140 ++++++++++++++++++++ board/amlogic/p200/MAINTAINERS | 2 + configs/videostrong-kii-pro_defconfig | 70 ++++++++++ doc/board/amlogic/index.rst | 1 + doc/board/amlogic/videostrong-kii-pro.rst | 112 ++++++++++++++++ 7 files changed, 339 insertions(+) create mode 100644 arch/arm/dts/meson-gxbb-kii-pro-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxbb-kii-pro.dts create mode 100644 configs/videostrong-kii-pro_defconfig create mode 100644 doc/board/amlogic/videostrong-kii-pro.rst
From: Ferass El Hafidi vitali64pmemail@protonmail.com
Import the device tree from mainline linux (v6.4-rc1) and add the old PHY reset bindings in the PHY node, else U-Boot and linux won't be able to use the PHY.
Signed-off-by: Ferass El Hafidi vitali64pmemail@protonmail.com --- arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-gxbb-kii-pro-u-boot.dtsi | 13 ++ arch/arm/dts/meson-gxbb-kii-pro.dts | 140 ++++++++++++++++++++ 3 files changed, 154 insertions(+) create mode 100644 arch/arm/dts/meson-gxbb-kii-pro-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxbb-kii-pro.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 935b2f1517..b2dec5fe73 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -187,6 +187,7 @@ dtb-$(CONFIG_ARCH_S5P4418) += \ dtb-$(CONFIG_ARCH_MESON) += \ meson-axg-s400.dtb \ meson-axg-jethome-jethub-j100.dtb \ + meson-gxbb-kii-pro.dtb \ meson-gxbb-nanopi-k2.dtb \ meson-gxbb-odroidc2.dtb \ meson-gxbb-nanopi-k2.dtb \ diff --git a/arch/arm/dts/meson-gxbb-kii-pro-u-boot.dtsi b/arch/arm/dts/meson-gxbb-kii-pro-u-boot.dtsi new file mode 100644 index 0000000000..191c5192c6 --- /dev/null +++ b/arch/arm/dts/meson-gxbb-kii-pro-u-boot.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#include "meson-gx-u-boot.dtsi" + +ðmac { + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0>, <10000>, <1000000>; + snps,reset-active-low; +}; diff --git a/arch/arm/dts/meson-gxbb-kii-pro.dts b/arch/arm/dts/meson-gxbb-kii-pro.dts new file mode 100644 index 0000000000..e238f1f101 --- /dev/null +++ b/arch/arm/dts/meson-gxbb-kii-pro.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Mohammad Rasim mohammad.rasim96@gmail.com + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-aiu.h> + +/ { + compatible = "videostrong,kii-pro", "amlogic,meson-gxbb"; + model = "Videostrong KII Pro"; + + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + leds { + compatible = "gpio-leds"; + led { + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + button-reset { + label = "reset"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "KII-PRO"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101GR (0x02430c54) */ + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ir { + linux,rc-map-name = "rc-videostrong-kii-pro"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4335a0"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +};
From: Ferass El Hafidi vitali64pmemail@protonmail.com
Add configurations for the Videostrong KII Pro set-top box. This defconfig is cloned from the WeTek Play2's.
Signed-off-by: Ferass El Hafidi vitali64pmemail@protonmail.com --- board/amlogic/p200/MAINTAINERS | 1 + configs/videostrong-kii-pro_defconfig | 70 +++++++++++++++++++++++++++ 2 files changed, 71 insertions(+) create mode 100644 configs/videostrong-kii-pro_defconfig
diff --git a/board/amlogic/p200/MAINTAINERS b/board/amlogic/p200/MAINTAINERS index fe451dd7db..19e27def70 100644 --- a/board/amlogic/p200/MAINTAINERS +++ b/board/amlogic/p200/MAINTAINERS @@ -9,6 +9,7 @@ F: configs/odroid-c2_defconfig F: configs/p200_defconfig F: configs/wetek-hub_defconfig F: configs/wetek-play2_defconfig +F: configs/videostrong-kii-pro_defconfig F: doc/board/amlogic/p200.rst F: doc/board/amlogic/nanopi-k2.rst F: doc/board/amlogic/odroid-c2.rst diff --git a/configs/videostrong-kii-pro_defconfig b/configs/videostrong-kii-pro_defconfig new file mode 100644 index 0000000000..77b7a38296 --- /dev/null +++ b/configs/videostrong-kii-pro_defconfig @@ -0,0 +1,70 @@ +CONFIG_ARM=y +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SYS_LOAD_ADDR=0x1000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_DEBUG_UART_BASE=0xc81004c0 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" kii-pro" +CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-kii-pro" +CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 +CONFIG_OF_BOARD_SETUP=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_MISC_INIT_R=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SARADC_MESON=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MESON=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE_MESON8B=y +CONFIG_PHY=y +CONFIG_MESON_GXBB_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_GXBB=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_SYSINFO=y +CONFIG_SYSINFO_SMBIOS=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_KEYBOARD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_SPLASH_SCREEN=y +CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_VIDEO_BMP_RLE8=y +CONFIG_BMP_16BPP=y +CONFIG_BMP_24BPP=y +CONFIG_BMP_32BPP=y +CONFIG_OF_LIBFDT_OVERLAY=y
From: Ferass El Hafidi vitali64pmemail@protonmail.com
Add build instructions for the KII Pro set-top box.
Signed-off-by: Ferass El Hafidi vitali64pmemail@protonmail.com --- board/amlogic/p200/MAINTAINERS | 1 + doc/board/amlogic/index.rst | 1 + doc/board/amlogic/videostrong-kii-pro.rst | 112 ++++++++++++++++++++++ 3 files changed, 114 insertions(+) create mode 100644 doc/board/amlogic/videostrong-kii-pro.rst
diff --git a/board/amlogic/p200/MAINTAINERS b/board/amlogic/p200/MAINTAINERS index 19e27def70..5cf0ce05dc 100644 --- a/board/amlogic/p200/MAINTAINERS +++ b/board/amlogic/p200/MAINTAINERS @@ -13,5 +13,6 @@ F: configs/videostrong-kii-pro_defconfig F: doc/board/amlogic/p200.rst F: doc/board/amlogic/nanopi-k2.rst F: doc/board/amlogic/odroid-c2.rst +F: doc/board/amlogic/videostrong-kii-pro.rst F: doc/board/amlogic/wetek-hub.rst F: doc/board/amlogic/wetek-play2.rst diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index 66b581c837..46f44bf34e 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -118,6 +118,7 @@ Board Documentation sei610 s400 u200 + videostrong-kii-pro wetek-core2 wetek-hub wetek-play2 diff --git a/doc/board/amlogic/videostrong-kii-pro.rst b/doc/board/amlogic/videostrong-kii-pro.rst new file mode 100644 index 0000000000..1c6adac996 --- /dev/null +++ b/doc/board/amlogic/videostrong-kii-pro.rst @@ -0,0 +1,112 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Videostrong KII Pro (S905) +===================================== + +Videostrong KII Pro is an Android STB manufactured by Videostrong and +based on the Amlogic p201 reference board, with the following specification: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - 16GB eMMC + - Gigabit Ethernet + - Boardcom BCM4335 WiFi and BT 4.0 + - HDMI 2.0 4K/60Hz display + - 3x USB 2.0 host + - 1x USB 2.0 otg + - microSD + - Infrared receiver + - Blue LED + - Red LED + - Power button (case, front) + - Reset button (underside) + - DVB Card: DVB-S and DVB-T/C + +Schematics are not publicly available. + +U-Boot Compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make videostrong-kii-pro_defconfig + $ make + +U-Boot Signing with Pre-Built FIP repo +-------------------------------------- + +.. code-block:: bash + + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip + $ mkdir my-output-dir + $ ./build-fip.sh wetek-play2 /path/to/u-boot/u-boot.bin my-output-dir + +U-Boot Manual Signing +--------------------- + +Amlogic does not provide sources for the firmware and tools needed to create +a bootloader image and Videostrong has not publicly shared the U-Boot sources +needed to build FIP binaries for signing. However you can use the WeTek +Play2 binaries from the amlogic-boot-fip repo as the WeTek Play2 and the +Videostrong KII Pro share the same RAM chips. + +.. code-block:: bash + + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip/wetek-play2 + $ export FIPDIR=$PWD + +Go back to the mainline U-Boot source tree then: + +.. code-block:: bash + + $ mkdir fip + $ cp $FIPDIR/bl2.bin fip/ + $ cp $FIPDIR/acs.bin fip/ + $ cp $FIPDIR/bl21.bin fip/ + $ cp $FIPDIR/bl30.bin fip/ + $ cp $FIPDIR/bl301.bin fip/ + $ cp $FIPDIR/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \ + --bl31 fip/bl31.img \ + --bl33 fip/bl33.bin \ + fip/fip.bin + $ sed -i 's/\x73\x02\x08\x91/\x1F\x20\x03\xD5/' fip/bl2.bin + $ python3 $FIPDIR/acs_tool.py fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + $ cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin + $ $FIPDIR/aml_encrypt_gxb --bootsig \ + --input fip/boot_new.bin + --output fip/u-boot.bin + +Then write U-Boot to SD or eMMC with: + +.. code-block:: bash + + $ DEV=/dev/boot_device + $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync + $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc + $ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc + $ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc + $ ./aml_chksum fip/u-boot.bin.gxbb + $ dd if=fip/u-boot.bin.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440
participants (2)
-
Ferass EL HAFIDI -
Ferass El Hafidi