The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 will cause the mpc8315erdb board can't boot up.

The patch fix that bug, and remove the duplicated #ifdef CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for MPC8313E processor.

Signed-off-by: Dave Liu daveliu@freescale.com --- cpu/mpc83xx/cpu_init.c | 7 +------ cpu/mpc83xx/speed.c | 10 +++++----- include/mpc83xx.h | 10 +++------- 3 files changed, 9 insertions(+), 18 deletions(-)

diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 3337d8c..e643037 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -73,11 +73,6 @@ void cpu_init_f (volatile immap_t * im) (CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT); #endif

-#ifdef CFG_SPCR_TSECEP - /* eTSEC Emergency priority */ - im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) | (CFG_SPCR_TSECEP << SPCR_TSECEP_SHIFT); -#endif - #ifdef CFG_ACR_RPTCNT /* Arbiter repeat count */ im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) | @@ -85,7 +80,7 @@ void cpu_init_f (volatile immap_t * im) #endif

#ifdef CFG_SPCR_TSECEP - /* all TSEC's Emergency priority */ + /* all eTSEC's Emergency priority */ im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) | (CFG_SPCR_TSECEP << SPCR_TSECEP_SHIFT); #endif diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 61c9379..f598699 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -367,17 +367,17 @@ int get_clocks(void) #endif

#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315) - switch ((sccr & SCCR_SATACM) >> SCCR_SATACM_SHIFT) { - case SCCR_SATACM_0: + switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) { + case 0: sata_clk = 0; break; - case SCCR_SATACM_1: + case 1: sata_clk = csb_clk; break; - case SCCR_SATACM_2: + case 2: sata_clk = csb_clk / 2; break; - case SCCR_SATACM_3: + case 3: sata_clk = csb_clk / 3; break; default: diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 39cecf2..df052e3 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -725,6 +725,7 @@ #define SCCR_USBCM_3 0x00F00000

#elif defined(CONFIG_MPC8313) +/* TSEC1 bits are for TSEC2 as well */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 #define SCCR_TSEC1CM_0 0x00000000 @@ -732,13 +733,6 @@ #define SCCR_TSEC1CM_2 0x80000000 #define SCCR_TSEC1CM_3 0xC0000000

-#define SCCR_TSEC2CM 0x30000000 -#define SCCR_TSEC2CM_SHIFT 28 -#define SCCR_TSEC2CM_0 0x00000000 -#define SCCR_TSEC2CM_1 0x10000000 -#define SCCR_TSEC2CM_2 0x20000000 -#define SCCR_TSEC2CM_3 0x30000000 - #define SCCR_TSEC1ON 0x20000000 #define SCCR_TSEC1ON_SHIFT 29 #define SCCR_TSEC2ON 0x10000000 @@ -838,6 +832,8 @@ #define SCCR_PCIEXP2CM_3 0x000c0000

/* All of the four SATA controllers must have the same clock ratio */ +#define SCCR_SATA1CM 0x000000c0 +#define SCCR_SATA1CM_SHIFT 6 #define SCCR_SATACM 0x000000ff #define SCCR_SATACM_SHIFT 0 #define SCCR_SATACM_0 0x00000000