This platform is currently unmaintained and untested, so remove it. Further, as it is the only TI816X SoC example, remove related files as well.

Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/dts/Makefile | 1 - arch/arm/dts/dm8168-evm-u-boot.dtsi | 12 - arch/arm/dts/dm8168-evm.dts | 171 ------ arch/arm/dts/dm816x-clocks.dtsi | 246 --------- arch/arm/dts/dm816x.dtsi | 517 ------------------ arch/arm/include/asm/arch-am33xx/clock.h | 4 - .../include/asm/arch-am33xx/clock_ti81xx.h | 118 ---- arch/arm/include/asm/arch-am33xx/ddr_defs.h | 6 - arch/arm/include/asm/arch-am33xx/emac_defs.h | 37 -- arch/arm/include/asm/arch-am33xx/hardware.h | 2 - .../include/asm/arch-am33xx/hardware_ti816x.h | 62 --- .../include/asm/arch-am33xx/mmc_host_def.h | 5 - arch/arm/include/asm/arch-am33xx/mux.h | 2 - arch/arm/include/asm/arch-am33xx/mux_ti816x.h | 362 ------------ arch/arm/include/asm/arch-am33xx/omap.h | 4 - arch/arm/include/asm/arch-am33xx/spl.h | 14 +- arch/arm/mach-omap2/Kconfig | 11 - arch/arm/mach-omap2/am33xx/Kconfig | 10 - arch/arm/mach-omap2/am33xx/Makefile | 4 +- arch/arm/mach-omap2/am33xx/clock_ti816x.c | 407 -------------- arch/arm/mach-omap2/am33xx/ddr.c | 9 - arch/arm/mach-omap2/am33xx/ti816x_emif4.c | 165 ------ arch/arm/mach-omap2/boot-common.c | 20 +- board/ti/ti816x/Kconfig | 15 - board/ti/ti816x/MAINTAINERS | 6 - board/ti/ti816x/Makefile | 10 - board/ti/ti816x/evm.c | 140 ----- configs/ti816x_evm_defconfig | 82 --- drivers/i2c/Kconfig | 1 - drivers/net/ti/davinci_emac.c | 4 +- include/configs/ti816x_evm.h | 63 --- 31 files changed, 5 insertions(+), 2505 deletions(-) delete mode 100644 arch/arm/dts/dm8168-evm-u-boot.dtsi delete mode 100644 arch/arm/dts/dm8168-evm.dts delete mode 100644 arch/arm/dts/dm816x-clocks.dtsi delete mode 100644 arch/arm/dts/dm816x.dtsi delete mode 100644 arch/arm/include/asm/arch-am33xx/clock_ti81xx.h delete mode 100644 arch/arm/include/asm/arch-am33xx/emac_defs.h delete mode 100644 arch/arm/include/asm/arch-am33xx/hardware_ti816x.h delete mode 100644 arch/arm/include/asm/arch-am33xx/mux_ti816x.h delete mode 100644 arch/arm/mach-omap2/am33xx/clock_ti816x.c delete mode 100644 arch/arm/mach-omap2/am33xx/ti816x_emif4.c delete mode 100644 board/ti/ti816x/Kconfig delete mode 100644 board/ti/ti816x/MAINTAINERS delete mode 100644 board/ti/ti816x/Makefile delete mode 100644 board/ti/ti816x/evm.c delete mode 100644 configs/ti816x_evm_defconfig delete mode 100644 include/configs/ti816x_evm.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 935b2f1517f2..35f50f4b156b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -449,7 +449,6 @@ dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \ am4372-generic.dtb \ am437x-cm-t43.dtb dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb -dtb-$(CONFIG_TI816X) += dm8168-evm.dtb dtb-$(CONFIG_TARGET_THUNDERX_88XX) += thunderx-88xx.dtb

dtb-$(CONFIG_ARCH_SOCFPGA) += \ diff --git a/arch/arm/dts/dm8168-evm-u-boot.dtsi b/arch/arm/dts/dm8168-evm-u-boot.dtsi deleted file mode 100644 index f939df27e472..000000000000 --- a/arch/arm/dts/dm8168-evm-u-boot.dtsi +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * dm8168-evm U-Boot Additions - * - * Copyright (C) 2020 Dario Binacchi dariobin@libero.it - */ - -/ { - ocp { - bootph-all; - }; -}; diff --git a/arch/arm/dts/dm8168-evm.dts b/arch/arm/dts/dm8168-evm.dts deleted file mode 100644 index 70255ab2598f..000000000000 --- a/arch/arm/dts/dm8168-evm.dts +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/dts-v1/; - -#include "dm816x.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "DM8168 EVM"; - compatible = "ti,dm8168-evm", "ti,dm8168"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x40000000 /* 1 GB */ - 0xc0000000 0x40000000>; /* 1 GB */ - }; - - /* FDC6331L controlled by SD_POW pin */ - vmmcsd_fixed: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&dm816x_pinmux { - mcspi1_pins: pinmux_mcspi1_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */ - DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */ - DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */ - DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */ - >; - }; - - mmc_pins: pinmux_mmc_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */ - DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */ - DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */ - DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */ - DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */ - DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */ - DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */ - DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */ - DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */ - >; - }; - - usb0_pins: pinmux_usb0_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ - >; - }; -}; - -&i2c1 { - extgpio0: pcf8575@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&i2c2 { - extgpio1: pcf8575@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&gpmc { - ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ - - nand@0,0 { - compatible = "ti,omap2-nand"; - linux,mtd-name= "micron,mt29f2g16aadwp"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - #address-cells = <1>; - #size-cells = <1>; - ti,nand-ecc-opt = "bch8"; - nand-bus-width = <16>; - gpmc,device-width = <2>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - partition@0 { - label = "X-Loader"; - reg = <0 0x80000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x80000 0x1c0000>; - }; - partition@1c0000 { - label = "Environment"; - reg = <0x240000 0x40000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x280000 0x500000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x780000 0xf880000>; - }; - }; -}; - -&mcspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi1_pins>; - - flash@0 { - compatible = "w25x32"; - spi-max-frequency = <48000000>; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <4>; - cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - -/* At least dm8168-evm rev c won't support multipoint, later may */ -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins>; - mentor,multipoint = <0>; -}; - -&usb1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; - mentor,multipoint = <0>; -}; diff --git a/arch/arm/dts/dm816x-clocks.dtsi b/arch/arm/dts/dm816x-clocks.dtsi deleted file mode 100644 index f7a839dabf83..000000000000 --- a/arch/arm/dts/dm816x-clocks.dtsi +++ /dev/null @@ -1,246 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -&scrm { - main_fapll: main_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x400 0x40>; - clocks = <&sys_clkin_ck &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>, <4>, <5>, - <6>, <7>; - clock-output-names = "main_pll_clk1", - "main_pll_clk2", - "main_pll_clk3", - "main_pll_clk4", - "main_pll_clk5", - "main_pll_clk6", - "main_pll_clk7"; - }; - - ddr_fapll: ddr_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x440 0x30>; - clocks = <&sys_clkin_ck &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>, <4>; - clock-output-names = "ddr_pll_clk1", - "ddr_pll_clk2", - "ddr_pll_clk3", - "ddr_pll_clk4"; - }; - - video_fapll: video_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x470 0x30>; - clocks = <&sys_clkin_ck &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>; - clock-output-names = "video_pll_clk1", - "video_pll_clk2", - "video_pll_clk3"; - }; - - audio_fapll: audio_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x4a0 0x30>; - clocks = <&main_fapll 7>, < &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>, <4>, <5>; - clock-output-names = "audio_pll_clk1", - "audio_pll_clk2", - "audio_pll_clk3", - "audio_pll_clk4", - "audio_pll_clk5"; - }; -}; - -&scrm_clocks { - secure_32k_ck: secure_32k_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - sys_32k_ck: sys_32k_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - tclkin_ck: tclkin_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - sys_clkin_ck: sys_clkin_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <27000000>; - }; -}; - -/* 0x48180000 */ -&prcm_clocks { - clkout_pre_ck: clkout_pre_ck@100 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1 - &audio_fapll 1>; - reg = <0x100>; - }; - - clkout_div_ck: clkout_div_ck@100 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout_pre_ck>; - ti,bit-shift = <3>; - ti,max-div = <8>; - reg = <0x100>; - }; - - clkout_ck: clkout_ck@100 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout_div_ck>; - ti,bit-shift = <7>; - reg = <0x100>; - }; - - /* CM_DPLL clocks p1795 */ - sysclk1_ck: sysclk1_ck@300 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 1>; - ti,max-div = <7>; - reg = <0x0300>; - }; - - sysclk2_ck: sysclk2_ck@304 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 2>; - ti,max-div = <7>; - reg = <0x0304>; - }; - - sysclk3_ck: sysclk3_ck@308 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 3>; - ti,max-div = <7>; - reg = <0x0308>; - }; - - sysclk4_ck: sysclk4_ck@30c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 4>; - ti,max-div = <1>; - reg = <0x030c>; - }; - - sysclk5_ck: sysclk5_ck@310 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sysclk4_ck>; - ti,max-div = <1>; - reg = <0x0310>; - }; - - sysclk6_ck: sysclk6_ck@314 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 4>; - ti,dividers = <2>, <4>; - reg = <0x0314>; - }; - - sysclk10_ck: sysclk10_ck@324 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&ddr_fapll 2>; - ti,max-div = <7>; - reg = <0x0324>; - }; - - sysclk24_ck: sysclk24_ck@3b4 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 5>; - ti,max-div = <7>; - reg = <0x03b4>; - }; - - mpu_ck: mpu_ck@15dc { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sysclk2_ck>; - ti,bit-shift = <1>; - reg = <0x15dc>; - }; - - audio_pll_a_ck: audio_pll_a_ck@35c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&audio_fapll 1>; - ti,max-div = <7>; - reg = <0x035c>; - }; - - sysclk18_ck: sysclk18_ck@378 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_32k_ck>, <&audio_pll_a_ck>; - reg = <0x0378>; - }; - - timer1_fck: timer1_fck@390 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x0390>; - }; - - timer2_fck: timer2_fck@394 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x0394>; - }; - - timer3_fck: timer3_fck@398 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x0398>; - }; - - timer4_fck: timer4_fck@39c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x039c>; - }; - - timer5_fck: timer5_fck@3a0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x03a0>; - }; - - timer6_fck: timer6_fck@3a4 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x03a4>; - }; - - timer7_fck: timer7_fck@3a8 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x03a8>; - }; -}; diff --git a/arch/arm/dts/dm816x.dtsi b/arch/arm/dts/dm816x.dtsi deleted file mode 100644 index c4a8653b7f0c..000000000000 --- a/arch/arm/dts/dm816x.dtsi +++ /dev/null @@ -1,517 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/omap.h> - -/ { - compatible = "ti,dm816"; - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - - aliases { - i2c0 = &i2c1; - i2c1 = &i2c2; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - ethernet0 = &eth0; - ethernet1 = &eth1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0>; - }; - }; - - pmu { - compatible = "arm,cortex-a8-pmu"; - interrupts = <3>; - }; - - /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap3-mpu"; - ti,hwmods = "mpu"; - }; - }; - - /* - * XXX: Use a flat representation of the dm816x interconnect. - * The real dm816x interconnect network is quite complex. Since - * it will not bring real advantage to represent that in DT - * for the moment, just use a fake OCP bus entry to represent - * the whole bus hierarchy. - */ - ocp { - compatible = "simple-bus"; - reg = <0x44000000 0x10000>; - interrupts = <9 10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - prcm: prcm@48180000 { - compatible = "ti,dm816-prcm", "simple-bus"; - reg = <0x48180000 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x48180000 0x4000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prcm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@48140000 { - compatible = "ti,dm816-scrm", "simple-bus"; - reg = <0x48140000 0x21000>; - #address-cells = <1>; - #size-cells = <1>; - #pinctrl-cells = <1>; - ranges = <0 0x48140000 0x21000>; - - dm816x_pinmux: pinmux@800 { - compatible = "pinctrl-single"; - reg = <0x800 0x50a>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xf>; - }; - - /* Device Configuration Registers */ - scm_conf: syscon@600 { - compatible = "syscon", "simple-bus"; - reg = <0x600 0x110>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x600 0x110>; - - usb_phy0: usb-phy@20 { - compatible = "ti,dm8168-usb-phy"; - reg = <0x20 0x8>; - reg-names = "phy"; - clocks = <&main_fapll 6>; - clock-names = "refclk"; - #phy-cells = <0>; - syscon = <&scm_conf>; - }; - - usb_phy1: usb-phy@28 { - compatible = "ti,dm8168-usb-phy"; - reg = <0x28 0x8>; - reg-names = "phy"; - clocks = <&main_fapll 6>; - clock-names = "refclk"; - #phy-cells = <0>; - syscon = <&scm_conf>; - }; - }; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; - interrupts = <12 13 14>; - #dma-cells = <1>; - }; - - elm: elm@48080000 { - compatible = "ti,816-elm"; - ti,hwmods = "elm"; - reg = <0x48080000 0x2000>; - interrupts = <4>; - }; - - gpio1: gpio@48032000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - reg = <0x48032000 0x1000>; - interrupts = <96>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@4804c000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio2"; - ti,gpio-always-on; - reg = <0x4804c000 0x1000>; - interrupts = <98>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x2000>; - #address-cells = <2>; - #size-cells = <1>; - interrupts = <100>; - dmas = <&edma 52>; - dma-names = "rxtx"; - gpmc,num-cs = <6>; - gpmc,num-waitpins = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - - i2c1: i2c@48028000 { - compatible = "ti,omap4-i2c"; - ti,hwmods = "i2c1"; - reg = <0x48028000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <70>; - dmas = <&edma 58 &edma 59>; - dma-names = "tx", "rx"; - }; - - i2c2: i2c@4802a000 { - compatible = "ti,omap4-i2c"; - ti,hwmods = "i2c2"; - reg = <0x4802a000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <71>; - dmas = <&edma 60 &edma 61>; - dma-names = "tx", "rx"; - }; - - intc: interrupt-controller@48200000 { - compatible = "ti,dm816-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x48200000 0x1000>; - }; - - rtc: rtc@480c0000 { - compatible = "ti,am3352-rtc", "ti,da830-rtc"; - reg = <0x480c0000 0x1000>; - interrupts = <75 76>; - ti,hwmods = "rtc"; - }; - - mailbox: mailbox@480c8000 { - compatible = "ti,omap4-mailbox"; - reg = <0x480c8000 0x2000>; - interrupts = <77>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - mbox_dsp: mbox-dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <0 0 0>; - }; - }; - - spinbox: spinbox@480ca000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x480ca000 0x2000>; - ti,hwmods = "spinbox"; - #hwlock-cells = <1>; - }; - - mdio: mdio@4a100800 { - compatible = "ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x4a100800 0x100>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - phy0: ethernet-phy@0 { - reg = <1>; - }; - phy1: ethernet-phy@1 { - reg = <2>; - }; - }; - - eth0: ethernet@4a100000 { - compatible = "ti,dm816-emac"; - ti,hwmods = "emac0"; - reg = <0x4a100000 0x800 - 0x4a100900 0x3700>; - clocks = <&sysclk24_ck>; - syscon = <&scm_conf>; - ti,davinci-ctrl-reg-offset = <0>; - ti,davinci-ctrl-mod-reg-offset = <0x900>; - ti,davinci-ctrl-ram-offset = <0x2000>; - ti,davinci-ctrl-ram-size = <0x2000>; - interrupts = <40 41 42 43>; - phy-handle = <&phy0>; - }; - - eth1: ethernet@4a120000 { - compatible = "ti,dm816-emac"; - ti,hwmods = "emac1"; - reg = <0x4a120000 0x4000>; - clocks = <&sysclk24_ck>; - syscon = <&scm_conf>; - ti,davinci-ctrl-reg-offset = <0>; - ti,davinci-ctrl-mod-reg-offset = <0x900>; - ti,davinci-ctrl-ram-offset = <0x2000>; - ti,davinci-ctrl-ram-size = <0x2000>; - interrupts = <44 45 46 47>; - phy-handle = <&phy1>; - }; - - mcspi1: spi@48030000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48030000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <65>; - ti,spi-num-cs = <4>; - ti,hwmods = "mcspi1"; - dmas = <&edma 16 &edma 17 - &edma 18 &edma 19 - &edma 20 &edma 21 - &edma 22 &edma 23>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mmc1: mmc@48060000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x48060000 0x11000>; - ti,hwmods = "mmc1"; - interrupts = <64>; - dmas = <&edma 24 &edma 25>; - dma-names = "tx", "rx"; - }; - - timer1: timer@4802e000 { - compatible = "ti,dm816-timer"; - reg = <0x4802e000 0x2000>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; - }; - - timer2: timer@48040000 { - compatible = "ti,dm816-timer"; - reg = <0x48040000 0x2000>; - interrupts = <68>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48042000 { - compatible = "ti,dm816-timer"; - reg = <0x48042000 0x2000>; - interrupts = <69>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48044000 { - compatible = "ti,dm816-timer"; - reg = <0x48044000 0x2000>; - interrupts = <92>; - ti,hwmods = "timer4"; - ti,timer-pwm; - }; - - timer5: timer@48046000 { - compatible = "ti,dm816-timer"; - reg = <0x48046000 0x2000>; - interrupts = <93>; - ti,hwmods = "timer5"; - ti,timer-pwm; - }; - - timer6: timer@48048000 { - compatible = "ti,dm816-timer"; - reg = <0x48048000 0x2000>; - interrupts = <94>; - ti,hwmods = "timer6"; - ti,timer-pwm; - }; - - timer7: timer@4804a000 { - compatible = "ti,dm816-timer"; - reg = <0x4804a000 0x2000>; - interrupts = <95>; - ti,hwmods = "timer7"; - ti,timer-pwm; - }; - - uart1: serial@48020000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart1"; - reg = <0x48020000 0x2000>; - clock-frequency = <48000000>; - interrupts = <72>; - dmas = <&edma 26 &edma 27>; - dma-names = "tx", "rx"; - }; - - uart2: serial@48022000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart2"; - reg = <0x48022000 0x2000>; - clock-frequency = <48000000>; - interrupts = <73>; - dmas = <&edma 28 &edma 29>; - dma-names = "tx", "rx"; - }; - - uart3: serial@48024000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart3"; - reg = <0x48024000 0x2000>; - clock-frequency = <48000000>; - interrupts = <74>; - dmas = <&edma 30 &edma 31>; - dma-names = "tx", "rx"; - }; - - /* NOTE: USB needs a transceiver driver for phys to work */ - usb: usb_otg_hs@47401000 { - compatible = "ti,am33xx-usb"; - reg = <0x47401000 0x400000>; - ranges; - #address-cells = <1>; - #size-cells = <1>; - ti,hwmods = "usb_otg_hs"; - - usb0: usb@47401000 { - compatible = "ti,musb-dm816"; - reg = <0x47401400 0x400 - 0x47401000 0x200>; - reg-names = "mc", "control"; - interrupts = <18>; - interrupt-names = "mc"; - dr_mode = "host"; - interface-type = <0>; - phys = <&usb_phy0>; - phy-names = "usb2-phy"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - - dmas = <&cppi41dma 0 0 &cppi41dma 1 0 - &cppi41dma 2 0 &cppi41dma 3 0 - &cppi41dma 4 0 &cppi41dma 5 0 - &cppi41dma 6 0 &cppi41dma 7 0 - &cppi41dma 8 0 &cppi41dma 9 0 - &cppi41dma 10 0 &cppi41dma 11 0 - &cppi41dma 12 0 &cppi41dma 13 0 - &cppi41dma 14 0 &cppi41dma 0 1 - &cppi41dma 1 1 &cppi41dma 2 1 - &cppi41dma 3 1 &cppi41dma 4 1 - &cppi41dma 5 1 &cppi41dma 6 1 - &cppi41dma 7 1 &cppi41dma 8 1 - &cppi41dma 9 1 &cppi41dma 10 1 - &cppi41dma 11 1 &cppi41dma 12 1 - &cppi41dma 13 1 &cppi41dma 14 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - usb1: usb@47401800 { - compatible = "ti,musb-dm816"; - reg = <0x47401c00 0x400 - 0x47401800 0x200>; - reg-names = "mc", "control"; - interrupts = <19>; - interrupt-names = "mc"; - dr_mode = "host"; - interface-type = <0>; - phys = <&usb_phy1>; - phy-names = "usb2-phy"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - - dmas = <&cppi41dma 15 0 &cppi41dma 16 0 - &cppi41dma 17 0 &cppi41dma 18 0 - &cppi41dma 19 0 &cppi41dma 20 0 - &cppi41dma 21 0 &cppi41dma 22 0 - &cppi41dma 23 0 &cppi41dma 24 0 - &cppi41dma 25 0 &cppi41dma 26 0 - &cppi41dma 27 0 &cppi41dma 28 0 - &cppi41dma 29 0 &cppi41dma 15 1 - &cppi41dma 16 1 &cppi41dma 17 1 - &cppi41dma 18 1 &cppi41dma 19 1 - &cppi41dma 20 1 &cppi41dma 21 1 - &cppi41dma 22 1 &cppi41dma 23 1 - &cppi41dma 24 1 &cppi41dma 25 1 - &cppi41dma 26 1 &cppi41dma 27 1 - &cppi41dma 28 1 &cppi41dma 29 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - cppi41dma: dma-controller@47402000 { - compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; - reg-names = "glue", "controller", "scheduler", "queuemgr"; - interrupts = <17>; - interrupt-names = "glue"; - #dma-cells = <2>; - #dma-channels = <30>; - #dma-requests = <256>; - }; - }; - - wd_timer2: wd_timer@480c2000 { - compatible = "ti,omap3-wdt"; - ti,hwmods = "wd_timer"; - reg = <0x480c2000 0x1000>; - interrupts = <0>; - }; - }; -}; - -#include "dm816x-clocks.dtsi" diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index ad25b3e8aa0f..67400c2c63a3 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -13,10 +13,6 @@ #include <asm/arch/clocks_am33xx.h> #include <asm/arch/hardware.h>

-#if defined(CONFIG_TI816X) -#include <asm/arch/clock_ti81xx.h> -#endif - #define LDELAY 1000000

/*CM_<clock_domain>__CLKCTRL */ diff --git a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h deleted file mode 100644 index d22d95870631..000000000000 --- a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * ti81xx.h - * - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Antoine Tenart, atenart@adeneo-embedded.com - * - * This file is released under the terms of GPL v2 and any later version. - * See the file COPYING in the root directory of the source tree for details. - */ - -#ifndef _CLOCK_TI81XX_H_ -#define _CLOCK_TI81XX_H_ - -#define PRCM_MOD_EN 0x2 - -#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) -#define CM_ALWON_BASE (PRCM_BASE + 0x1400) - -struct cm_def { - unsigned int resv0[2]; - unsigned int l3fastclkstctrl; - unsigned int resv1[1]; - unsigned int pciclkstctrl; - unsigned int resv2[1]; - unsigned int ducaticlkstctrl; - unsigned int resv3[1]; - unsigned int emif0clkctrl; - unsigned int emif1clkctrl; - unsigned int dmmclkctrl; - unsigned int fwclkctrl; - unsigned int resv4[10]; - unsigned int usbclkctrl; - unsigned int resv5[1]; - unsigned int sataclkctrl; - unsigned int resv6[4]; - unsigned int ducaticlkctrl; - unsigned int pciclkctrl; -}; - -struct cm_alwon { - unsigned int l3slowclkstctrl; - unsigned int ethclkstctrl; - unsigned int l3medclkstctrl; - unsigned int mmu_clkstctrl; - unsigned int mmucfg_clkstctrl; - unsigned int ocmc0clkstctrl; -#if defined(CONFIG_TI816X) - unsigned int ocmc1clkstctrl; -#endif - unsigned int mpuclkstctrl; - unsigned int sysclk4clkstctrl; - unsigned int sysclk5clkstctrl; - unsigned int sysclk6clkstctrl; - unsigned int rtcclkstctrl; - unsigned int l3fastclkstctrl; - unsigned int resv0[67]; - unsigned int mcasp0clkctrl; - unsigned int mcasp1clkctrl; - unsigned int mcasp2clkctrl; - unsigned int mcbspclkctrl; - unsigned int uart0clkctrl; - unsigned int uart1clkctrl; - unsigned int uart2clkctrl; - unsigned int gpio0clkctrl; - unsigned int gpio1clkctrl; - unsigned int i2c0clkctrl; - unsigned int i2c1clkctrl; -#if defined(CONFIG_TI816X) - unsigned int resv1[1]; - unsigned int timer1clkctrl; - unsigned int timer2clkctrl; - unsigned int timer3clkctrl; - unsigned int timer4clkctrl; - unsigned int timer5clkctrl; - unsigned int timer6clkctrl; - unsigned int timer7clkctrl; -#endif - unsigned int wdtimerclkctrl; - unsigned int spiclkctrl; - unsigned int mailboxclkctrl; - unsigned int spinboxclkctrl; - unsigned int mmudataclkctrl; - unsigned int resv2[2]; - unsigned int mmucfgclkctrl; -#if defined(CONFIG_TI816X) - unsigned int resv3[1]; - unsigned int sdioclkctrl; -#endif - unsigned int ocmc0clkctrl; -#if defined(CONFIG_TI816X) - unsigned int ocmc1clkctrl; -#endif - unsigned int resv4[2]; - unsigned int controlclkctrl; - unsigned int resv5[2]; - unsigned int gpmcclkctrl; - unsigned int ethernet0clkctrl; - unsigned int ethernet1clkctrl; - unsigned int mpuclkctrl; -#if defined(CONFIG_TI816X) - unsigned int resv6[1]; -#endif - unsigned int l3clkctrl; - unsigned int l4hsclkctrl; - unsigned int l4lsclkctrl; - unsigned int rtcclkctrl; - unsigned int tpccclkctrl; - unsigned int tptc0clkctrl; - unsigned int tptc1clkctrl; - unsigned int tptc2clkctrl; - unsigned int tptc3clkctrl; -#if defined(CONFIG_TI816X) - unsigned int sr0clkctrl; - unsigned int sr1clkctrl; -#endif -}; - -#endif /* _CLOCK_TI81XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 15a5b641ffa2..1a0310710732 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -369,15 +369,9 @@ struct ddr_ctrl { unsigned int ddrckectrl; };

-#ifdef CONFIG_TI816X -void config_ddr(const struct ddr_data *data, const struct cmd_control *ctrl, - const struct emif_regs *regs, - const struct dmm_lisa_map_regs *lisa_regs, int nrs); -#else void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs, const struct ddr_data *data, const struct cmd_control *ctrl, const struct emif_regs *regs, int nr); -#endif void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size);

#endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/emac_defs.h b/arch/arm/include/asm/arch-am33xx/emac_defs.h deleted file mode 100644 index eb6516da93c2..000000000000 --- a/arch/arm/include/asm/arch-am33xx/emac_defs.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Texas Instruments - * - * Based on: - * - * ---------------------------------------------------------------------------- - * - * dm644x_emac.h - * - * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM - * - * Copyright (C) 2005 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * - */ - -#ifndef _EMAC_DEFS_H_ -#define _EMAC_DEFS_H_ - -#ifdef CONFIG_TI816X -#define EMAC_BASE_ADDR (0x4A100000) -#define EMAC_WRAPPER_BASE_ADDR (0x4A100900) -#define EMAC_WRAPPER_RAM_ADDR (0x4A102000) -#define EMAC_MDIO_BASE_ADDR (0x4A100800) -#define EMAC_MDIO_BUS_FREQ (250000000UL) -#define EMAC_MDIO_CLOCK_FREQ (2000000UL) - -typedef volatile unsigned int dv_reg; -typedef volatile unsigned int *dv_reg_p; - -#define DAVINCI_EMAC_VERSION2 -#define DAVINCI_EMAC_GIG_ENABLE -#endif - -#endif /* _EMAC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 2d7f9da3652c..387f053ce68c 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -14,8 +14,6 @@ #include <asm/arch/omap.h> #ifdef CONFIG_AM33XX #include <asm/arch/hardware_am33xx.h> -#elif defined(CONFIG_TI816X) -#include <asm/arch/hardware_ti816x.h> #elif defined(CONFIG_AM43XX) #include <asm/arch/hardware_am43xx.h> #endif diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h deleted file mode 100644 index 78b79486ed47..000000000000 --- a/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * hardware_ti816x.h - * - * TI816x hardware specific header - * - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Antoine Tenart, atenart@adeneo-embedded.com - * Based on TI-PSP-04.00.02.14 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __AM33XX_HARDWARE_TI816X_H -#define __AM33XX_HARDWARE_TI816X_H - -/* UART */ -#define UART0_BASE 0x48020000 -#define UART1_BASE 0x48022000 -#define UART2_BASE 0x48024000 - -/* Watchdog Timer */ -#define WDT_BASE 0x480C2000 - -/* Control Module Base Address */ -#define CTRL_BASE 0x48140000 -#define CTRL_DEVICE_BASE 0x48140600 - -/* PRCM Base Address */ -#define PRCM_BASE 0x48180000 - -#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) -#define PRM_RSTST (PRM_RSTCTRL + 8) - -/* VTP Base address */ -#define VTP0_CTRL_ADDR 0x48198358 -#define VTP1_CTRL_ADDR 0x4819A358 - -/* DDR Base address */ -#define DDR_PHY_CMD_ADDR 0x48198000 -#define DDR_PHY_DATA_ADDR 0x481980C8 -#define DDR_PHY_CMD_ADDR2 0x4819A000 -#define DDR_PHY_DATA_ADDR2 0x4819A0C8 -#define DDR_DATA_REGS_NR 4 - - -#define DDRPHY_0_CONFIG_BASE 0x48198000 -#define DDRPHY_1_CONFIG_BASE 0x4819A000 -#define DDRPHY_CONFIG_BASE ((emif == 0) ? \ - DDRPHY_0_CONFIG_BASE : DDRPHY_1_CONFIG_BASE) - -/* RTC base address */ -#define RTC_BASE 0x480C0000 - -#endif /* __AM33XX_HARDWARE_TI816X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index ed15d15c5b30..b1b189631af2 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -24,9 +24,4 @@ #define OMAP_HSMMC1_BASE 0x48060000 #define OMAP_HSMMC2_BASE 0x481D8000

-#if defined(CONFIG_TI816X) -#undef MMC_CLOCK_REFERENCE -#define MMC_CLOCK_REFERENCE 48 /* MHz */ -#endif - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h index 7cf973710d15..ebb2d303dfed 100644 --- a/arch/arm/include/asm/arch-am33xx/mux.h +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -20,8 +20,6 @@

#ifdef CONFIG_AM33XX #include <asm/arch/mux_am33xx.h> -#elif defined(CONFIG_TI816X) -#include <asm/arch/mux_ti816x.h> #elif defined(CONFIG_AM43XX) #include <asm/arch/mux_am43xx.h> #endif diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti816x.h b/arch/arm/include/asm/arch-am33xx/mux_ti816x.h deleted file mode 100644 index a6a8a988a0c4..000000000000 --- a/arch/arm/include/asm/arch-am33xx/mux_ti816x.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - * mux_ti816x.h - * - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Antoine Tenart, atenart@adeneo-embedded.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MUX_TI816X_H_ -#define _MUX_TI816X_H_ - -#include <asm/io.h> - -#define MUX_CFG(value, offset) \ - __raw_writel(value, (CTRL_BASE + offset)); - -#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */ -#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */ -#define PULLUDEN (0x0 << 3) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ -#define MODE(val) (val) /* used for Readability */ - - -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int pincntl1; - int pincntl2; - int pincntl3; - int pincntl4; - int pincntl5; - int pincntl6; - int pincntl7; - int pincntl8; - int pincntl9; - int pincntl10; - int pincntl11; - int pincntl12; - int pincntl13; - int pincntl14; - int pincntl15; - int pincntl16; - int pincntl17; - int pincntl18; - int pincntl19; - int pincntl20; - int pincntl21; - int pincntl22; - int pincntl23; - int pincntl24; - int pincntl25; - int pincntl26; - int pincntl27; - int pincntl28; - int pincntl29; - int pincntl30; - int pincntl31; - int pincntl32; - int pincntl33; - int pincntl34; - int pincntl35; - int pincntl36; - int pincntl37; - int pincntl38; - int pincntl39; - int pincntl40; - int pincntl41; - int pincntl42; - int pincntl43; - int pincntl44; - int pincntl45; - int pincntl46; - int pincntl47; - int pincntl48; - int pincntl49; - int pincntl50; - int pincntl51; - int pincntl52; - int pincntl53; - int pincntl54; - int pincntl55; - int pincntl56; - int pincntl57; - int pincntl58; - int pincntl59; - int pincntl60; - int pincntl61; - int pincntl62; - int pincntl63; - int pincntl64; - int pincntl65; - int pincntl66; - int pincntl67; - int pincntl68; - int pincntl69; - int pincntl70; - int pincntl71; - int pincntl72; - int pincntl73; - int pincntl74; - int pincntl75; - int pincntl76; - int pincntl77; - int pincntl78; - int pincntl79; - int pincntl80; - int pincntl81; - int pincntl82; - int pincntl83; - int pincntl84; - int pincntl85; - int pincntl86; - int pincntl87; - int pincntl88; - int pincntl89; - int pincntl90; - int pincntl91; - int pincntl92; - int pincntl93; - int pincntl94; - int pincntl95; - int pincntl96; - int pincntl97; - int pincntl98; - int pincntl99; - int pincntl100; - int pincntl101; - int pincntl102; - int pincntl103; - int pincntl104; - int pincntl105; - int pincntl106; - int pincntl107; - int pincntl108; - int pincntl109; - int pincntl110; - int pincntl111; - int pincntl112; - int pincntl113; - int pincntl114; - int pincntl115; - int pincntl116; - int pincntl117; - int pincntl118; - int pincntl119; - int pincntl120; - int pincntl121; - int pincntl122; - int pincntl123; - int pincntl124; - int pincntl125; - int pincntl126; - int pincntl127; - int pincntl128; - int pincntl129; - int pincntl130; - int pincntl131; - int pincntl132; - int pincntl133; - int pincntl134; - int pincntl135; - int pincntl136; - int pincntl137; - int pincntl138; - int pincntl139; - int pincntl140; - int pincntl141; - int pincntl142; - int pincntl143; - int pincntl144; - int pincntl145; - int pincntl146; - int pincntl147; - int pincntl148; - int pincntl149; - int pincntl150; - int pincntl151; - int pincntl152; - int pincntl153; - int pincntl154; - int pincntl155; - int pincntl156; - int pincntl157; - int pincntl158; - int pincntl159; - int pincntl160; - int pincntl161; - int pincntl162; - int pincntl163; - int pincntl164; - int pincntl165; - int pincntl166; - int pincntl167; - int pincntl168; - int pincntl169; - int pincntl170; - int pincntl171; - int pincntl172; - int pincntl173; - int pincntl174; - int pincntl175; - int pincntl176; - int pincntl177; - int pincntl178; - int pincntl179; - int pincntl180; - int pincntl181; - int pincntl182; - int pincntl183; - int pincntl184; - int pincntl185; - int pincntl186; - int pincntl187; - int pincntl188; - int pincntl189; - int pincntl190; - int pincntl191; - int pincntl192; - int pincntl193; - int pincntl194; - int pincntl195; - int pincntl196; - int pincntl197; - int pincntl198; - int pincntl199; - int pincntl200; - int pincntl201; - int pincntl202; - int pincntl203; - int pincntl204; - int pincntl205; - int pincntl206; - int pincntl207; - int pincntl208; - int pincntl209; - int pincntl210; - int pincntl211; - int pincntl212; - int pincntl213; - int pincntl214; - int pincntl215; - int pincntl216; - int pincntl217; - int pincntl218; - int pincntl219; - int pincntl220; - int pincntl221; - int pincntl222; - int pincntl223; - int pincntl224; - int pincntl225; - int pincntl226; - int pincntl227; - int pincntl228; - int pincntl229; - int pincntl230; - int pincntl231; - int pincntl232; - int pincntl233; - int pincntl234; - int pincntl235; - int pincntl236; - int pincntl237; - int pincntl238; - int pincntl239; - int pincntl240; - int pincntl241; - int pincntl242; - int pincntl243; - int pincntl244; - int pincntl245; - int pincntl246; - int pincntl247; - int pincntl248; - int pincntl249; - int pincntl250; - int pincntl251; - int pincntl252; - int pincntl253; - int pincntl254; - int pincntl255; - int pincntl256; - int pincntl257; - int pincntl258; - int pincntl259; - int pincntl260; - int pincntl261; - int pincntl262; - int pincntl263; - int pincntl264; - int pincntl265; - int pincntl266; - int pincntl267; - int pincntl268; - int pincntl269; - int pincntl270; - int pincntl271; - int pincntl272; - int pincntl273; - int pincntl274; - int pincntl275; - int pincntl276; - int pincntl277; - int pincntl278; - int pincntl279; - int pincntl280; - int pincntl281; - int pincntl282; - int pincntl283; - int pincntl284; - int pincntl285; - int pincntl286; - int pincntl287; - int pincntl288; - int pincntl289; - int pincntl290; - int pincntl291; - int pincntl292; - int pincntl293; - int pincntl294; - int pincntl295; - int pincntl296; - int pincntl297; - int pincntl298; - int pincntl299; - int pincntl300; - int pincntl301; - int pincntl302; - int pincntl303; - int pincntl304; - int pincntl305; - int pincntl306; - int pincntl307; - int pincntl308; - int pincntl309; - int pincntl310; - int pincntl311; - int pincntl312; - int pincntl313; - int pincntl314; - int pincntl315; - int pincntl316; - int pincntl317; - int pincntl318; - int pincntl319; - int pincntl320; - int pincntl321; - int pincntl322; - int pincntl323; -}; - -#endif /* endif _MUX_TI816X_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 4c71dbf3ab60..53046deed565 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -20,10 +20,6 @@ #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 #define NON_SECURE_SRAM_IMG_END 0x4030B800 -#elif defined(CONFIG_TI816X) -#define NON_SECURE_SRAM_START 0x40300000 -#define NON_SECURE_SRAM_END 0x40320000 -#define NON_SECURE_SRAM_IMG_END 0x4031B800 #elif defined(CONFIG_AM43XX) #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40340000 diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 6bd3ca0d076a..9ddb346dc962 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -9,19 +9,7 @@ #define BOOT_DEVICE_NONE 0x00 #define BOOT_DEVICE_MMC2_2 0xFF

-#if defined(CONFIG_TI816X) -#define BOOT_DEVICE_XIP 0x01 -#define BOOT_DEVICE_XIPWAIT 0x02 -#define BOOT_DEVICE_NAND 0x03 -#define BOOT_DEVICE_ONENAND 0x04 -#define BOOT_DEVICE_MMC2 0x05 /* ROM only supports 2nd instance. */ -#define BOOT_DEVICE_MMC1 0x06 -#define BOOT_DEVICE_UART 0x43 -#define BOOT_DEVICE_USB 0x45 - -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 -#elif defined(CONFIG_AM33XX) +#if defined(CONFIG_AM33XX) #define BOOT_DEVICE_XIP 0x01 #define BOOT_DEVICE_XIPWAIT 0x02 #define BOOT_DEVICE_NAND 0x05 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 309b967b0dd5..8465b5426d81 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -77,16 +77,6 @@ config OMAP54XX imply SPL_SERIAL imply SYS_I2C_OMAP24XX

-config TI816X - bool "TI816X SoC" - select SPECIFY_CONSOLE_INDEX - imply NAND_OMAP_ELM - imply NAND_OMAP_GPMC - help - Support for AM335x SOC from Texas Instruments. - The AM335x high performance SOC features a Cortex-A8 - ARM core and more. - config AM43XX bool "AM43XX SoC" select SPECIFY_CONSOLE_INDEX @@ -203,7 +193,6 @@ source "board/BuR/brppt1/Kconfig" source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" -source "board/ti/ti816x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/am335x/Kconfig" source "board/compulab/cm_t43/Kconfig" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 1299aec055ec..8cb0c57163b1 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -1,13 +1,3 @@ -if TI816X - -config TARGET_TI816X_EVM - bool "Support ti816x_evm" - help - This option specifies support for the TI8168 EVM development platform - with PG2.0 silicon and DDR3 DRAM. - -endif - if AM33XX

config AM33XX_CHILISOM diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile index bf94d345dae5..2aa8013527ec 100644 --- a/arch/arm/mach-omap2/am33xx/Makefile +++ b/arch/arm/mach-omap2/am33xx/Makefile @@ -9,13 +9,11 @@ ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),) obj-y += clock.o endif

-obj-$(CONFIG_TI816X) += clock_ti816x.o obj-y += sys_info.o obj-y += ddr.o -ifeq ($(CONFIG_TI816X)$(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),) +ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),) obj-y += emif4.o endif -obj-$(CONFIG_TI816X) += ti816x_emif4.o obj-y += board.o obj-y += mux.o obj-y += prcm-regs.o diff --git a/arch/arm/mach-omap2/am33xx/clock_ti816x.c b/arch/arm/mach-omap2/am33xx/clock_ti816x.c deleted file mode 100644 index ec4cc753812d..000000000000 --- a/arch/arm/mach-omap2/am33xx/clock_ti816x.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * clock_ti816x.c - * - * Clocks for TI816X based boards - * - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Antoine Tenart, atenart@adeneo-embedded.com - * - * Based on TI-PSP-04.00.02.14 : - * - * Copyright (C) 2009, Texas Instruments, Incorporated - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <common.h> -#include <asm/arch/ddr_defs.h> -#include <asm/arch/cpu.h> -#include <asm/arch/clock.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> -#include <linux/bitops.h> - -#include <asm/emif.h> - -#define CM_PLL_BASE (CTRL_BASE + 0x0400) - -/* Main PLL */ -#define MAIN_N 64 -#define MAIN_P 0x1 -#define MAIN_INTFREQ1 0x8 -#define MAIN_FRACFREQ1 0x800000 -#define MAIN_MDIV1 0x2 -#define MAIN_INTFREQ2 0xE -#define MAIN_FRACFREQ2 0x0 -#define MAIN_MDIV2 0x1 -#define MAIN_INTFREQ3 0x8 -#define MAIN_FRACFREQ3 0xAAAAB0 -#define MAIN_MDIV3 0x3 -#define MAIN_INTFREQ4 0x9 -#define MAIN_FRACFREQ4 0x55554F -#define MAIN_MDIV4 0x3 -#define MAIN_INTFREQ5 0x9 -#define MAIN_FRACFREQ5 0x374BC6 -#define MAIN_MDIV5 0xC -#define MAIN_MDIV6 0x48 -#define MAIN_MDIV7 0x4 - -/* DDR PLL */ -#define DDR_N 59 -#define DDR_P 0x1 -#define DDR_MDIV1 0x2 -#define DDR_INTFREQ2 0x8 -#define DDR_FRACFREQ2 0xD99999 -#define DDR_MDIV2 0x1E -#define DDR_INTFREQ3 0x8 -#define DDR_FRACFREQ3 0x0 -#define DDR_MDIV3 0x4 -#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ4 0x0 -#define DDR_MDIV4 0x4 -#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ5 0x0 -#define DDR_MDIV5 0x4 - -#define CONTROL_STATUS (CTRL_BASE + 0x40) -#define DDR_RCD (CTRL_BASE + 0x070C) -#define CM_TIMER1_CLKSEL (PRCM_BASE + 0x390) -#define CM_ALWON_CUST_EFUSE_CLKCTRL (PRCM_BASE + 0x1628) - -#define INTCPS_SYSCONFIG 0x48200010 -#define CM_SYSCLK10_CLKSEL 0x48180324 - -struct cm_pll { - unsigned int mainpll_ctrl; /* offset 0x400 */ - unsigned int mainpll_pwd; - unsigned int mainpll_freq1; - unsigned int mainpll_div1; - unsigned int mainpll_freq2; - unsigned int mainpll_div2; - unsigned int mainpll_freq3; - unsigned int mainpll_div3; - unsigned int mainpll_freq4; - unsigned int mainpll_div4; - unsigned int mainpll_freq5; - unsigned int mainpll_div5; - unsigned int resv0[1]; - unsigned int mainpll_div6; - unsigned int resv1[1]; - unsigned int mainpll_div7; - unsigned int ddrpll_ctrl; /* offset 0x440 */ - unsigned int ddrpll_pwd; - unsigned int resv2[1]; - unsigned int ddrpll_div1; - unsigned int ddrpll_freq2; - unsigned int ddrpll_div2; - unsigned int ddrpll_freq3; - unsigned int ddrpll_div3; - unsigned int ddrpll_freq4; - unsigned int ddrpll_div4; - unsigned int ddrpll_freq5; - unsigned int ddrpll_div5; - unsigned int videopll_ctrl; /* offset 0x470 */ - unsigned int videopll_pwd; - unsigned int videopll_freq1; - unsigned int videopll_div1; - unsigned int videopll_freq2; - unsigned int videopll_div2; - unsigned int videopll_freq3; - unsigned int videopll_div3; - unsigned int resv3[4]; - unsigned int audiopll_ctrl; /* offset 0x4A0 */ - unsigned int audiopll_pwd; - unsigned int resv4[2]; - unsigned int audiopll_freq2; - unsigned int audiopll_div2; - unsigned int audiopll_freq3; - unsigned int audiopll_div3; - unsigned int audiopll_freq4; - unsigned int audiopll_div4; - unsigned int audiopll_freq5; - unsigned int audiopll_div5; -}; - -const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; -const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; -const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE; -const struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; - -void enable_dmm_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); - /* Wait for dmm to be fully functional, including OCP */ - while (((readl(&cmdef->dmmclkctrl) >> 17) & 0x3) != 0) - ; -} - -void enable_emif_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->fwclkctrl); - writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); - writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); - writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); - - /* Wait for clocks to be active */ - while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) - ; - /* Wait for emif0 to be fully functional, including OCP */ - while (((readl(&cmdef->emif0clkctrl) >> 17) & 0x3) != 0) - ; - /* Wait for emif1 to be fully functional, including OCP */ - while (((readl(&cmdef->emif1clkctrl) >> 17) & 0x3) != 0) - ; -} - -/* assume delay is aprox at least 1us */ -static void ddr_delay(int d) -{ - int i; - - /* - * read a control register. - * this is a bit more delay and cannot be optimized by the compiler - * assuming one read takes 200 cycles and A8 is runing 1 GHz - * somewhat conservative setting - */ - for (i = 0; i < 50*d; i++) - readl(CONTROL_STATUS); -} - -static void main_pll_init_ti816x(void) -{ - u32 main_pll_ctrl = 0; - - /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFFB; - main_pll_ctrl |= BIT(2); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Enable PLL by setting BIT3 in its ctrl reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFF7; - main_pll_ctrl |= BIT(3); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Write the values of N,P in the CTRL reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFF; - main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Power up clock1-7 */ - writel(0x0, &cmpll->mainpll_pwd); - - /* Program the freq and divider values for clock1-7 */ - writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1), - &cmpll->mainpll_freq1); - writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2), - &cmpll->mainpll_freq2); - writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3), - &cmpll->mainpll_freq3); - writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4), - &cmpll->mainpll_freq4); - writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5), - &cmpll->mainpll_freq5); - writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5); - - writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6); - - writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7); - - /* Wait for PLL to lock */ - while ((readl(&cmpll->mainpll_ctrl) & BIT(7)) != BIT(7)) - ; - - /* Put the PLL in normal mode, disable bypass */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFFB; - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); -} - -static void ddr_pll_bypass_ti816x(void) -{ - u32 ddr_pll_ctrl = 0; - - /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFFFFFFFB; - ddr_pll_ctrl |= BIT(2); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); -} - -static void ddr_pll_init_ti816x(void) -{ - u32 ddr_pll_ctrl = 0; - /* Enable PLL by setting BIT3 in its ctrl reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFFFFFFF7; - ddr_pll_ctrl |= BIT(3); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); - - /* Write the values of N,P in the CTRL reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFF; - ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); - - ddr_delay(10); - - /* Power up clock1-5 */ - writel(0x0, &cmpll->ddrpll_pwd); - - /* Program the freq and divider values for clock1-3 */ - writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); - ddr_delay(1); - writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); - writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2), - &cmpll->ddrpll_freq2); - writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2); - writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); - ddr_delay(1); - writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); - ddr_delay(1); - writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), - &cmpll->ddrpll_freq3); - ddr_delay(1); - writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), - &cmpll->ddrpll_freq3); - - ddr_delay(5); - - /* Wait for PLL to lock */ - while ((readl(&cmpll->ddrpll_ctrl) & BIT(7)) != BIT(7)) - ; - - /* Power up RCD */ - writel(BIT(0), DDR_RCD); -} - -static void peripheral_enable(void) -{ - /* Wake-up the l3_slow clock */ - writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); - - /* - * Note on Timers: - * There are 8 timers(0-7) out of which timer 0 is a secure timer. - * Timer 0 mux should not be changed - * - * To access the timer registers we need the to be - * enabled which is what we do in the first step - */ - - /* Enable timer1 */ - writel(PRCM_MOD_EN, &cmalwon->timer1clkctrl); - /* Select timer1 clock to be CLKIN (27MHz) */ - writel(BIT(1), CM_TIMER1_CLKSEL); - - /* Wait for timer1 to be ON-ACTIVE */ - while (((readl(&cmalwon->l3slowclkstctrl) - & (0x80000<<1))>>20) != 1) - ; - /* Wait for timer1 to be enabled */ - while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0) - ; - /* Active posted mode */ - writel(PRCM_MOD_EN, (DM_TIMER1_BASE + 0x54)); - while (readl(DM_TIMER1_BASE + 0x10) & BIT(0)) - ; - /* Start timer1 */ - writel(BIT(0), (DM_TIMER1_BASE + 0x38)); - - /* eFuse */ - writel(PRCM_MOD_EN, CM_ALWON_CUST_EFUSE_CLKCTRL); - while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != PRCM_MOD_EN) - ; - - /* Enable gpio0 */ - writel(PRCM_MOD_EN, &cmalwon->gpio0clkctrl); - while (readl(&cmalwon->gpio0clkctrl) != PRCM_MOD_EN) - ; - writel((BIT(1) | BIT(8)), &cmalwon->gpio0clkctrl); - - /* Enable gpio1 */ - writel(PRCM_MOD_EN, &cmalwon->gpio1clkctrl); - while (readl(&cmalwon->gpio1clkctrl) != PRCM_MOD_EN) - ; - writel((BIT(1) | BIT(8)), &cmalwon->gpio1clkctrl); - - /* Enable spi */ - writel(PRCM_MOD_EN, &cmalwon->spiclkctrl); - while (readl(&cmalwon->spiclkctrl) != PRCM_MOD_EN) - ; - - /* Enable i2c0 */ - writel(PRCM_MOD_EN, &cmalwon->i2c0clkctrl); - while (readl(&cmalwon->i2c0clkctrl) != PRCM_MOD_EN) - ; - - /* Enable ethernet0 */ - writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); - - /* Enable hsmmc */ - writel(PRCM_MOD_EN, &cmalwon->sdioclkctrl); - while (readl(&cmalwon->sdioclkctrl) != PRCM_MOD_EN) - ; -} - -void setup_clocks_for_console(void) -{ - /* Fix ROM code bug - from TI-PSP-04.00.02.14 */ - writel(0x0, CM_SYSCLK10_CLKSEL); - - ddr_pll_bypass_ti816x(); - - /* Enable uart0-2 */ - writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); - while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->uart1clkctrl); - while (readl(&cmalwon->uart1clkctrl) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->uart2clkctrl); - while (readl(&cmalwon->uart2clkctrl) != PRCM_MOD_EN) - ; - while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) - ; -} - -void setup_early_clocks(void) -{ - setup_clocks_for_console(); -} - -void prcm_init(void) -{ - /* Enable the control */ - writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); - - main_pll_init_ti816x(); - ddr_pll_init_ti816x(); - - /* - * With clk freqs setup to desired values, - * enable the required peripherals - */ - peripheral_enable(); -} diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c index f8434ecf5758..5f970d93f0ac 100644 --- a/arch/arm/mach-omap2/am33xx/ddr.c +++ b/arch/arm/mach-omap2/am33xx/ddr.c @@ -182,14 +182,6 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr) */ void config_sdram(const struct emif_regs *regs, int nr) { -#ifdef CONFIG_TI816X - writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); - writel(regs->emif_ddr_phy_ctlr_1, &emif_reg[nr]->emif_ddr_phy_ctrl_1); - writel(regs->emif_ddr_phy_ctlr_1, &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw); - writel(0x0000613B, &emif_reg[nr]->emif_sdram_ref_ctrl); /* initially a large refresh period */ - writel(0x1000613B, &emif_reg[nr]->emif_sdram_ref_ctrl); /* trigger initialization */ - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); -#else if (regs->zq_config) { writel(regs->zq_config, &emif_reg[nr]->emif_zq_config); writel(regs->sdram_config, &cstat->secure_emif_sdram_config); @@ -211,7 +203,6 @@ void config_sdram(const struct emif_regs *regs, int nr) /* Write REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT. */ if (regs->ocp_config) writel(regs->ocp_config, &emif_reg[nr]->emif_l3_config); -#endif }

/** diff --git a/arch/arm/mach-omap2/am33xx/ti816x_emif4.c b/arch/arm/mach-omap2/am33xx/ti816x_emif4.c deleted file mode 100644 index 707ea807ac28..000000000000 --- a/arch/arm/mach-omap2/am33xx/ti816x_emif4.c +++ /dev/null @@ -1,165 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * ti816x_emif4.c - * - * TI816x emif4 configuration file - * - * Copyright (C) 2017, Konsulko Group - */ - -#include <common.h> -#include <asm/arch/cpu.h> -#include <asm/arch/ddr_defs.h> -#include <asm/arch/hardware.h> -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> -#include <asm/emif.h> -#include <linux/delay.h> - -/********************************************************************* - * Init DDR3 on TI816X EVM - *********************************************************************/ -static void ddr_init_settings(const struct cmd_control *ctrl, int emif) -{ - /* - * setup use_rank_delays to 1. This is only necessary when - * multiple ranks are in use. Though the EVM does not have - * multiple ranks, this is a good value to set. - */ - writel(1, DDRPHY_CONFIG_BASE + 0x134); // DATA0_REG_PHY_USE_RANK0_DELAYS - writel(1, DDRPHY_CONFIG_BASE + 0x1d8); // DATA1_REG_PHY_USE_RANK0_DELAYS - writel(1, DDRPHY_CONFIG_BASE + 0x27c); // DATA2_REG_PHY_USE_RANK0_DELAYS - writel(1, DDRPHY_CONFIG_BASE + 0x320); // DATA3_REG_PHY_USE_RANK0_DELAYS - - config_cmd_ctrl(ctrl, emif); - - /* for ddr3 this needs to be set to 1 */ - writel(0x1, DDRPHY_CONFIG_BASE + 0x0F8); /* init mode */ - writel(0x1, DDRPHY_CONFIG_BASE + 0x104); - writel(0x1, DDRPHY_CONFIG_BASE + 0x19C); - writel(0x1, DDRPHY_CONFIG_BASE + 0x1A8); - writel(0x1, DDRPHY_CONFIG_BASE + 0x240); - writel(0x1, DDRPHY_CONFIG_BASE + 0x24C); - writel(0x1, DDRPHY_CONFIG_BASE + 0x2E4); - writel(0x1, DDRPHY_CONFIG_BASE + 0x2F0); - - /* - * This represents the initial value for the leveling process. The - * value is a ratio - so 0x100 represents one cycle. The real delay - * is determined through the leveling process. - * - * During the leveling process, 0x20 is subtracted from the value, so - * we have added that to the value we want to set. We also set the - * values such that byte3 completes leveling after byte2 and byte1 - * after byte0. - */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0F0); /* data0 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x0F4); /* */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x194); /* data1 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x198); /* */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x238); /* data2 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x23c); /* */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2dc); /* data3 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x2e0); /* */ - - - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0FC); /* data0 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x100); - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x1A0); /* data1 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x1A4); - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x244); /* data2 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x248); - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2E8); /* data3 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x2EC); - - writel(0x5, DDRPHY_CONFIG_BASE + 0x00C); /* cmd0 io config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x010); /* cmd0 io clk config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x040); /* cmd1 io config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x044); /* cmd1 io clk config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x074); /* cmd2 io config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x078); /* cmd2 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x0A8); /* data0 io config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x0AC); /* data0 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x14C); /* data1 io config - output impedance of pa */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x150); /* data1 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x1F0); /* data2 io config - output impedance of pa */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x1F4); /* data2 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x294); /* data3 io config - output impedance of pa */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x298); /* data3 io clk config - output impedance of pad */ -} - -static void ddr3_sw_levelling(const struct ddr_data *data, int emif) -{ - /* Set the correct value to DDR_VTP_CTRL_0 */ - writel(0x6, (DDRPHY_CONFIG_BASE + 0x358)); - - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x108)); - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x1AC)); - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x250)); - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x2F4)); - - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x0DC)); - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x180)); - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x224)); - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x2C8)); - - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x120)); - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x1C4)); - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x268)); - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x30C)); - - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x0C8)); - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x16C)); - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x210)); - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x2B4)); -} - -static struct dmm_lisa_map_regs *hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)DMM_BASE; - -#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x420) -void config_dmm(const struct dmm_lisa_map_regs *regs) -{ - writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); - - writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); - - /* Enable Tiled Access */ - writel(0x80000000, DMM_PAT_BASE_ADDR); -} - -void config_ddr(const struct ddr_data *data, const struct cmd_control *ctrl, - const struct emif_regs *regs, - const struct dmm_lisa_map_regs *lisa_regs, int nrs) -{ - int i; - - enable_emif_clocks(); - - for (i = 0; i < nrs; i++) - ddr_init_settings(ctrl, i); - - enable_dmm_clocks(); - - /* Program the DMM to for non-interleaved configuration */ - config_dmm(lisa_regs); - - /* Program EMIF CFG Registers */ - for (i = 0; i < nrs; i++) { - set_sdram_timings(regs, i); - config_sdram(regs, i); - } - - udelay(1000); - for (i = 0; i < nrs; i++) - ddr3_sw_levelling(data, i); - - udelay(50000); /* Some delay needed */ -} diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index 9a342a1bf952..a2dd5f6df01e 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -74,23 +74,6 @@ void save_omap_boot_params(void) */ if (boot_device == BOOT_DEVICE_QSPI_4) boot_device = BOOT_DEVICE_SPI; -#endif -#ifdef CONFIG_TI816X - /* - * On PG2.0 and later TI816x the values we get when booting are not the - * same as on PG1.0, which is what the defines are based on. Update - * them as needed. - */ - if (get_cpu_rev() != 1) { - if (boot_device == 0x05) { - omap_boot_params->boot_device = BOOT_DEVICE_NAND; - boot_device = BOOT_DEVICE_NAND; - } - if (boot_device == 0x08) { - omap_boot_params->boot_device = BOOT_DEVICE_MMC1; - boot_device = BOOT_DEVICE_MMC1; - } - } #endif /* * When booting from peripheral booting, the boot device is not usable @@ -183,8 +166,7 @@ void save_omap_boot_params(void)

gd->arch.omap_boot_mode = boot_mode;

-#if !defined(CONFIG_TI816X) && \ - !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) +#if !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)

/* CH flags */

diff --git a/board/ti/ti816x/Kconfig b/board/ti/ti816x/Kconfig deleted file mode 100644 index 95973b47f1ee..000000000000 --- a/board/ti/ti816x/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_TI816X_EVM - -config SYS_BOARD - default "ti816x" - -config SYS_VENDOR - default "ti" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "ti816x_evm" - -endif diff --git a/board/ti/ti816x/MAINTAINERS b/board/ti/ti816x/MAINTAINERS deleted file mode 100644 index fd9a98fc7624..000000000000 --- a/board/ti/ti816x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TI816X BOARD -M: Tom Rini trini@konsulko.com -S: Maintained -F: board/ti/ti816x/ -F: include/configs/ti816x_evm.h -F: configs/ti816x_evm_defconfig diff --git a/board/ti/ti816x/Makefile b/board/ti/ti816x/Makefile deleted file mode 100644 index f12712aea640..000000000000 --- a/board/ti/ti816x/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> -# Antoine Tenart, atenart@adeneo-embedded.com -# -# Based on TI-PSP-04.00.02.14 : -# -# Copyright (C) 2009, Texas Instruments, Incorporated - -obj-y := evm.o diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c deleted file mode 100644 index 8c708355d4ca..000000000000 --- a/board/ti/ti816x/evm.c +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * evm.c - * - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Antoine Tenart, atenart@adeneo-embedded.com - */ - -#include <common.h> -#include <env.h> -#include <init.h> -#include <net.h> -#include <spl.h> -#include <asm/cache.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/cpu.h> -#include <asm/arch/ddr_defs.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mem.h> -#include <asm/arch/mux.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; -#if defined(CONFIG_MTD_RAW_NAND) - gpmc_init(); -#endif - return 0; -} - -int board_eth_init(struct bd_info *bis) -{ - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - printf("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - else - printf("Unable to read MAC address. Set <ethaddr>\n"); - } - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -static struct module_pin_mux mmc_pin_mux[] = { - { OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) }, - { OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { -1 }, -}; - -void set_uart_mux_conf(void) {} - -void set_mux_conf_regs(void) -{ - configure_module_pin_mux(mmc_pin_mux); -} - -/* - * EMIF Paramters. Refer the EMIF register documentation and the - * memory datasheet for details. This is for 796 MHz. - */ -#define EMIF_TIM1 0x1779C9FE -#define EMIF_TIM2 0x50608074 -#define EMIF_TIM3 0x009F857F -#define EMIF_SDREF 0x10001841 -#define EMIF_SDCFG 0x62A73832 -#define EMIF_PHYCFG 0x00000110 -static const struct emif_regs ddr3_emif_regs = { - .sdram_config = EMIF_SDCFG, - .ref_ctrl = EMIF_SDREF, - .sdram_tim1 = EMIF_TIM1, - .sdram_tim2 = EMIF_TIM2, - .sdram_tim3 = EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = EMIF_PHYCFG, -}; - -static const struct cmd_control ddr3_ctrl = { - .cmd0csratio = 0x100, - .cmd0iclkout = 0x001, - .cmd1csratio = 0x100, - .cmd1iclkout = 0x001, - .cmd2csratio = 0x100, - .cmd2iclkout = 0x001, -}; - -/* These values are obtained from the CCS app */ -#define RD_DQS_GATE (0x1B3) -#define RD_DQS (0x35) -#define WR_DQS (0x93) -static struct ddr_data ddr3_data = { - .datardsratio0 = ((RD_DQS<<10) | (RD_DQS<<0)), - .datawdsratio0 = ((WR_DQS<<10) | (WR_DQS<<0)), - .datawiratio0 = ((0x20<<10) | 0x20<<0), - .datagiratio0 = ((0x20<<10) | 0x20<<0), - .datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)), - .datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)), -}; - -static const struct dmm_lisa_map_regs evm_lisa_map_regs = { - .dmm_lisa_map_0 = 0x00000000, - .dmm_lisa_map_1 = 0x00000000, - .dmm_lisa_map_2 = 0x80640300, - .dmm_lisa_map_3 = 0xC0640320, -}; - -void sdram_init(void) -{ - /* - * Pass in our DDR3 config information and that we have 2 EMIFs to - * configure. - */ - config_ddr(&ddr3_data, &ddr3_ctrl, &ddr3_emif_regs, - &evm_lisa_map_regs, 2); -} -#endif /* CONFIG_SPL_BUILD */ diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig deleted file mode 100644 index a4bc99329796..000000000000 --- a/configs/ti816x_evm_defconfig +++ /dev/null @@ -1,82 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4031ff00 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x1C0000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="dm8168-evm" -CONFIG_SPL_TEXT_BASE=0x40400000 -CONFIG_TI816X=y -CONFIG_TARGET_TI816X_EVM=y -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x1E0000 -CONFIG_SYS_CLK_FREQ=27000000 -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyO2,115200n8 noinitrd earlyprintk" -CONFIG_BOOTCOMMAND="mmc rescan;fatload mmc 0 ${loadaddr} uImage;bootm ${loadaddr}" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_DISPLAY_BOARDINFO is not set -# CONFIG_MISC_INIT_R is not set -CONFIG_SPL_MAX_SIZE=0xfff1b400 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_NAND_DRIVERS=y -CONFIG_SPL_NAND_ECC=y -CONFIG_SPL_NAND_BASE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_BOOTP_DNS2=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" -# CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NET_RETRY_COUNT=10 -CONFIG_BOOTP_SEND_HOSTNAME=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_OMAP24XX=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 -CONFIG_SYS_NAND_BUSWIDTH_16BIT=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0xc0000 -CONFIG_MII=y -CONFIG_DRIVER_TI_EMAC=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -# CONFIG_USE_PRIVATE_LIBGCC is not set diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 05b14d2451c6..5e81698143a1 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -744,7 +744,6 @@ config SYS_I2C_SPEED config SYS_I2C_BUS_MAX int "Max I2C busses" depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA - default 2 if TI816X default 3 if OMAP34XX || AM33XX || AM43XX default 4 if ARCH_SOCFPGA || OMAP44XX default 5 if OMAP54XX diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c index 29d2fc9b54e9..034877a76907 100644 --- a/drivers/net/ti/davinci_emac.c +++ b/drivers/net/ti/davinci_emac.c @@ -833,9 +833,9 @@ static int davinci_emac_probe(struct udevice *dev) #endif }

-#if defined(CONFIG_TI816X) || (defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ +#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) && \ - !defined(CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE)) + !defined(CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE) for (i = 0; i < num_phy; i++) { if (phy[i].is_phy_connected(i)) phy[i].auto_negotiate(i); diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h deleted file mode 100644 index ac6d46f917b8..000000000000 --- a/include/configs/ti816x_evm.h +++ /dev/null @@ -1,63 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * ti816x_evm.h - * - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Antoine Tenart, atenart@adeneo-embedded.com - */ - -#ifndef __CONFIG_TI816X_EVM_H -#define __CONFIG_TI816X_EVM_H - -#include <configs/ti_armv7_omap.h> -#include <asm/arch/omap.h> - -#define CFG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CFG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ -#define CFG_SYS_SDRAM_BASE 0x80000000 - -/** - * Platform/Board specific defs - */ -#define CFG_SYS_TIMERBASE 0x4802E000 - -/* - * NS16550 Configuration - */ -#define CFG_SYS_NS16550_CLK (48000000) -#define CFG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ - -/* allow overwriting serial config and ethaddr */ - - -/* - * GPMC NAND block. We support 1 device and the physical address to - * access CS0 at is 0x8000000. - */ -#define CFG_SYS_NAND_BASE 0x8000000 - -/* NAND: SPL related configs */ - -/* NAND: device related configs */ -/* NAND: driver related configs */ -#define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CFG_SYS_NAND_ECCSIZE 512 -#define CFG_SYS_NAND_ECCBYTES 14 - -/* SPL */ -/* Defines for SPL */ - -#endif