Marek Vasut wrote:

...

...

Marek Vasut wrote:

...

...

Hi Marek,

u-boot-v2011.09 doesn't support for imx28. I need complete support patch for mx28. where can i get those patches?

for which version of u-boot this patches supports..?

Regards, Manoj

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

M

Thanks Marek, Patches applied.. on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0" can u help me on this further?

Regards, Manoj

There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" in uboot ML ... apply the patch and retry. What GCC do you use?

M

Hello Marek,

I'm using u-boot version : u-boot-imx

gcc version:4.3.3

When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" I'm getting: patching file usb.c Hunk #1 FAILED at 263. Hunk #2 FAILED at 313. 2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej

then i made some changes for common/usb.c as per the patch,even it gets freezes after printing the debug msg. "enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"

Regards, Manoj

Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any patches. That'd explain why you're getting errors applying the last USB patch I suggested.

Also, please try ELDK5.0 toolchain.

M

Marek Vasut wrote:

...

...

Marek Vasut wrote:

...

...

Marek Vasut wrote:

...

> Hi Marek, > > u-boot-v2011.09 doesn't support for imx28. I need complete support > patch for mx28. where can i get those patches? > > for which version of u-boot this patches supports..? > > > Regards, > Manoj

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

M

Thanks Marek, Patches applied.. on usb start command i'm getting "scanning bus for devices... New Device 0" then its freezes after getting the debug message "enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0" can u help me on this further?

Regards, Manoj

There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" in uboot ML ... apply the patch and retry. What GCC do you use?

M

Hello Marek,

I'm using u-boot version : u-boot-imx

gcc version:4.3.3

When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" I'm getting: patching file usb.c Hunk #1 FAILED at 263. Hunk #2 FAILED at 313. 2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej

then i made some changes for common/usb.c as per the patch,even it gets freezes after printing the debug msg. "enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0"

Regards, Manoj

Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any patches. That'd explain why you're getting errors applying the last USB patch I suggested.

Also, please try ELDK5.0 toolchain.

M

Marek,

ya i'm using master code and now its working fine..

Is it because of "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" or ELDK5.0 or Using u-boot/master ? What did you change?

Anyway, it's good to hear!!

M