[PATCH V2] doc: mmc man-page
Provide a man-pages for the mmc command.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com --- Changelog on V2 - Add missing empty line - Add bootbus's arguments descriptions --- doc/usage/index.rst | 1 + doc/usage/mmc.rst | 212 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 213 insertions(+) create mode 100644 doc/usage/mmc.rst
diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 6c59bbadab45..15c682ceface 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -30,6 +30,7 @@ Shell commands load loady mbr + mmc pstore qfw sbi diff --git a/doc/usage/mmc.rst b/doc/usage/mmc.rst new file mode 100644 index 000000000000..57284ed6741e --- /dev/null +++ b/doc/usage/mmc.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0+: + +mmc command +============ + +Synopsis +-------- + +:: + + mmc info + mmc read addr blk# cnt + mmc write addr blk# cnt + mmc erase blk# cnt + mmc rescan + mmc part + mmc dev [dev] [part] + mmc list + mmc wp + mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode> + mmc bootpart-resize <dev> <dev part size MB> <RPMB part size MB> + mmc partconf <dev> [boot_ack boot_partition partition_access] + mmc rst-function <dev> <value> + +Description +----------- + +The mmc command is used to control MMC(eMMC/SD) device. + +The 'mmc info' command displays information (Manufacturer ID, OEM, Name, Bus Speed, Mode, ...) of MMC device. + +The 'mmc read' command reads raw data to memory address from MMC device with block offset and count. + +The 'mmc write' command writes raw data to MMC device from memory address with block offset and count. + + addr + memory address + blk# + start block offset + cnt + block count + +The 'mmc erase' command erases MMC device from block offset until count. + + blk# + start block offset + cnt + block count + +The 'mmc rescan' command scans the available MMC device. + +The 'mmc part' command displays the list available partition on current mmc device. + +The 'mmc dev' command shows or set current mmc device. + + dev + device number to change + part + partition number to change + +The 'mmc list' command displays the list available devices. + +The 'mmc wp' command enables "power on write protect" function for boot partitions. + +The 'mmc bootbus' command sets the BOOT_BUS_WIDTH field. (*Refer to eMMC specification*) + + boot_bus_width + 0x0 + x1 (sdr) or x4(ddr) buswidth in boot operation mode (default) + 0x1 + x4 (sdr/ddr) buswidth in boot operation mode + 0x2 + x8 (sdr/ddr) buswidth in boot operation mode + 0x3 + Reserved + + reset_boot_bus_width + 0x0 + Reset buswidth to x1, Single data reate and backward compatible timing after boot operation (default) + 0x1 + Retain BOOT_BUS_WIDTH and BOOT_MODE value after boot operation. This is relevant to Push-pull mode operation only + + boot_mode + 0x0 + Use single data rate + backward compatible timing in boot operation (default) + 0x1 + Use single data rate + High Speed timing in boot operation mode + 0x2 + Use dual data rate in boot operation + 0x3 + Reserved + +The 'mmc partconf' command shows or changes PARTITION_CONFIG field. + + boot_ack + boot acknowledge value + boot_partition + boot partition to enable for boot + 0x0 + Device not boot enabled(default) + 0x1 + Boot partition1 enabled for boot + 0x2 + Boot partition2 enabled for boot + 0x7 + User area enabled for boot + others + Reserved + partition_access + partitions to access + +The 'mmc bootpart-resize' command changes sizes of boot and RPMB partitions. + dev + device number + boot part size MB + target size of boot partition + RPMB part size MB + target size of RPMB partition + +The 'mmc rst-function' command changes the RST_n_FUNCTION field. +**WARNING** : This is a write-once field. (*Refer to eMMC specification*) + + value + 0x0 + RST_n signal is temporarily disabled (default) + 0x1 + RST_n signal is permanently enabled + 0x2 + RST_n signal is permanently disabled + 0x3 + Reserved + + +Examples +-------- + +The 'mmc info' command displays device's capabilities: +:: + + => mmc info + Device: EXYNOS DWMMC + Manufacturer ID: 45 + OEM: 100 + Name: SDW16 + Bus Speed: 52000000 + Mode: MMC DDR52 (52MHz) + Rd Block Len: 512 + MMC version 5.0 + High Capacity: Yes + Capacity: 14.7 GiB + Bus Width: 8-bit DDR + Erase Group Size: 512 KiB + HC WP Group Size: 8 MiB + User Capacity: 14.7 GiB WRREL + Boot Capacity: 4 MiB ENH + RPMB Capacity: 4 MiB ENH + Boot area 0 is not write protected + Boot area 1 is not write protected + +The raw data can be read/written via 'mmc read/write' command: +:: + + => mmc read 0x40000000 0x5000 0x100 + MMC read: dev # 0, block # 20480, count 256 ... 256 blocks read: OK + + => mmc write 0x40000000 0x5000 0x10 + MMC write: dev # 0, block # 20480, count 256 ... 256 blocks written: OK + +The partition list can be shown via 'mmc part' command: +:: + + => mmc part + Partition Map for MMC device 0 -- Partition Type: DOS + + Part Start Sector Num Sectors UUID Type + 1 8192 131072 dff8751a-01 0e Boot + 2 139264 6291456 dff8751a-02 83 + 3 6430720 1048576 dff8751a-03 83 + 4 7479296 23298048 dff8751a-04 05 Extd + 5 7481344 307200 dff8751a-05 83 + 6 7790592 65536 dff8751a-06 83 + 7 7858176 16384 dff8751a-07 83 + 8 7876608 22900736 dff8751a-08 83 + +The current device can be shown or set via 'mmc dev' command: +:: + + => mmc dev + switch to partitions #0, OK + mmc0(part0) is current device + => mmc dev 2 0 + switch to partitions #0, OK + mmc2 is current device + +The list of available devices can be shown via 'mmc list' command: +:: + + => mmc list + mmc list + EXYNOS DWMMC: 0 (eMMC) + EXYNOS DWMMC: 2 (SD) + +Configuration +------------- + +The mmc command is only available if CONFIG_CMD_MMC=y. +Some commands need to enable more configuration. + +write, erase + CONFIG_MMC_WRITE +bootbus, bootpart-resize, partconf, rst-function + CONFIG_SUPPORT_EMMC_BOOT=y
On 4/2/21 2:15 AM, Jaehoon Chung wrote:
Provide a man-pages for the mmc command.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com
Changelog on V2
- Add missing empty line
- Add bootbus's arguments descriptions
doc/usage/index.rst | 1 + doc/usage/mmc.rst | 212 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 213 insertions(+) create mode 100644 doc/usage/mmc.rst
diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 6c59bbadab45..15c682ceface 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -30,6 +30,7 @@ Shell commands load loady mbr
- mmc pstore qfw sbi
diff --git a/doc/usage/mmc.rst b/doc/usage/mmc.rst new file mode 100644 index 000000000000..57284ed6741e --- /dev/null +++ b/doc/usage/mmc.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0+:
+mmc command +============
+Synopsis +--------
+::
- mmc info
- mmc read addr blk# cnt
- mmc write addr blk# cnt
- mmc erase blk# cnt
- mmc rescan
- mmc part
- mmc dev [dev] [part]
- mmc list
- mmc wp
- mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode>
- mmc bootpart-resize <dev> <dev part size MB> <RPMB part size MB>
- mmc partconf <dev> [boot_ack boot_partition partition_access]
- mmc rst-function <dev> <value>
Dear Jaehoon,
thanks for updating the patch.
I am missing the configurable sub-commands:
mmc swrite addr blk# mmc hwpartition mmc rpmb read addr blk# cnt [address of auth-key] mmc rpmb write addr blk# cnt <address of auth-key> mmc rpmb key <address of auth-key> mmc rpmb counter mmc setdsr <value> mmc bkops-enable <dev>
Will they go into a follow up patch?
Best regards
Heinrich
+Description +-----------
+The mmc command is used to control MMC(eMMC/SD) device.
+The 'mmc info' command displays information (Manufacturer ID, OEM, Name, Bus Speed, Mode, ...) of MMC device.
+The 'mmc read' command reads raw data to memory address from MMC device with block offset and count.
+The 'mmc write' command writes raw data to MMC device from memory address with block offset and count.
- addr
memory address- blk#
start block offset- cnt
block count+The 'mmc erase' command erases MMC device from block offset until count.
- blk#
start block offset- cnt
block count+The 'mmc rescan' command scans the available MMC device.
+The 'mmc part' command displays the list available partition on current mmc device.
+The 'mmc dev' command shows or set current mmc device.
- dev
device number to change- part
partition number to change+The 'mmc list' command displays the list available devices.
+The 'mmc wp' command enables "power on write protect" function for boot partitions.
+The 'mmc bootbus' command sets the BOOT_BUS_WIDTH field. (*Refer to eMMC specification*)
- boot_bus_width
0x0x1 (sdr) or x4(ddr) buswidth in boot operation mode (default)0x1x4 (sdr/ddr) buswidth in boot operation mode0x2x8 (sdr/ddr) buswidth in boot operation mode0x3Reserved- reset_boot_bus_width
0x0Reset buswidth to x1, Single data reate and backward compatible timing after boot operation (default)0x1Retain BOOT_BUS_WIDTH and BOOT_MODE value after boot operation. This is relevant to Push-pull mode operation only- boot_mode
0x0Use single data rate + backward compatible timing in boot operation (default)0x1Use single data rate + High Speed timing in boot operation mode0x2Use dual data rate in boot operation0x3Reserved+The 'mmc partconf' command shows or changes PARTITION_CONFIG field.
- boot_ack
boot acknowledge value- boot_partition
boot partition to enable for boot0x0Device not boot enabled(default)0x1Boot partition1 enabled for boot0x2Boot partition2 enabled for boot0x7User area enabled for bootothersReserved- partition_access
partitions to access+The 'mmc bootpart-resize' command changes sizes of boot and RPMB partitions.
- dev
device number- boot part size MB
target size of boot partition- RPMB part size MB
target size of RPMB partition+The 'mmc rst-function' command changes the RST_n_FUNCTION field. +**WARNING** : This is a write-once field. (*Refer to eMMC specification*)
- value
0x0RST_n signal is temporarily disabled (default)0x1RST_n signal is permanently enabled0x2RST_n signal is permanently disabled0x3Reserved+Examples +--------
+The 'mmc info' command displays device's capabilities: +::
- => mmc info
- Device: EXYNOS DWMMC
- Manufacturer ID: 45
- OEM: 100
- Name: SDW16
- Bus Speed: 52000000
- Mode: MMC DDR52 (52MHz)
- Rd Block Len: 512
- MMC version 5.0
- High Capacity: Yes
- Capacity: 14.7 GiB
- Bus Width: 8-bit DDR
- Erase Group Size: 512 KiB
- HC WP Group Size: 8 MiB
- User Capacity: 14.7 GiB WRREL
- Boot Capacity: 4 MiB ENH
- RPMB Capacity: 4 MiB ENH
- Boot area 0 is not write protected
- Boot area 1 is not write protected
+The raw data can be read/written via 'mmc read/write' command: +::
- => mmc read 0x40000000 0x5000 0x100
- MMC read: dev # 0, block # 20480, count 256 ... 256 blocks read: OK
- => mmc write 0x40000000 0x5000 0x10
- MMC write: dev # 0, block # 20480, count 256 ... 256 blocks written: OK
+The partition list can be shown via 'mmc part' command: +::
- => mmc part
- Partition Map for MMC device 0 -- Partition Type: DOS
- Part Start Sector Num Sectors UUID Type
1 8192 131072 dff8751a-01 0e Boot2 139264 6291456 dff8751a-02 833 6430720 1048576 dff8751a-03 834 7479296 23298048 dff8751a-04 05 Extd5 7481344 307200 dff8751a-05 836 7790592 65536 dff8751a-06 837 7858176 16384 dff8751a-07 838 7876608 22900736 dff8751a-08 83+The current device can be shown or set via 'mmc dev' command: +::
- => mmc dev
- switch to partitions #0, OK
- mmc0(part0) is current device
- => mmc dev 2 0
- switch to partitions #0, OK
- mmc2 is current device
+The list of available devices can be shown via 'mmc list' command: +::
- => mmc list
- mmc list
- EXYNOS DWMMC: 0 (eMMC)
- EXYNOS DWMMC: 2 (SD)
+Configuration +-------------
+The mmc command is only available if CONFIG_CMD_MMC=y. +Some commands need to enable more configuration.
+write, erase
- CONFIG_MMC_WRITE
+bootbus, bootpart-resize, partconf, rst-function
- CONFIG_SUPPORT_EMMC_BOOT=y
On 4/2/21 1:15 PM, Heinrich Schuchardt wrote:
On 4/2/21 2:15 AM, Jaehoon Chung wrote:
Provide a man-pages for the mmc command.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com
Changelog on V2
- Add missing empty line
- Add bootbus's arguments descriptions
doc/usage/index.rst | 1 + doc/usage/mmc.rst | 212 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 213 insertions(+) create mode 100644 doc/usage/mmc.rst
diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 6c59bbadab45..15c682ceface 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -30,6 +30,7 @@ Shell commands load loady mbr + mmc pstore qfw sbi diff --git a/doc/usage/mmc.rst b/doc/usage/mmc.rst new file mode 100644 index 000000000000..57284ed6741e --- /dev/null +++ b/doc/usage/mmc.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0+:
+mmc command +============
+Synopsis +--------
+::
+ mmc info + mmc read addr blk# cnt + mmc write addr blk# cnt + mmc erase blk# cnt + mmc rescan + mmc part + mmc dev [dev] [part] + mmc list + mmc wp + mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode> + mmc bootpart-resize <dev> <dev part size MB> <RPMB part size MB> + mmc partconf <dev> [boot_ack boot_partition partition_access] + mmc rst-function <dev> <value>
Dear Jaehoon,
thanks for updating the patch.
I am missing the configurable sub-commands:
mmc swrite addr blk# mmc hwpartition mmc rpmb read addr blk# cnt [address of auth-key] mmc rpmb write addr blk# cnt <address of auth-key> mmc rpmb key <address of auth-key> mmc rpmb counter mmc setdsr <value> mmc bkops-enable <dev>
Will they go into a follow up patch?
Right, i didn't add some commands.
I will update them with another patch. I had been sent a patch about hwpartition command
https://patchwork.ozlabs.org/project/uboot/patch/20210226070718.10720-1-jh80...
If you're ok, I want to update doc file based on its patch after applied it.
And I want to send patch after checking exact behavior about other command.
Best Regards, Jaehoon Chung
Best regards
Heinrich
+Description +-----------
+The mmc command is used to control MMC(eMMC/SD) device.
+The 'mmc info' command displays information (Manufacturer ID, OEM, Name, Bus Speed, Mode, ...) of MMC device.
+The 'mmc read' command reads raw data to memory address from MMC device with block offset and count.
+The 'mmc write' command writes raw data to MMC device from memory address with block offset and count.
+ addr + memory address + blk# + start block offset + cnt + block count
+The 'mmc erase' command erases MMC device from block offset until count.
+ blk# + start block offset + cnt + block count
+The 'mmc rescan' command scans the available MMC device.
+The 'mmc part' command displays the list available partition on current mmc device.
+The 'mmc dev' command shows or set current mmc device.
+ dev + device number to change + part + partition number to change
+The 'mmc list' command displays the list available devices.
+The 'mmc wp' command enables "power on write protect" function for boot partitions.
+The 'mmc bootbus' command sets the BOOT_BUS_WIDTH field. (*Refer to eMMC specification*)
+ boot_bus_width + 0x0 + x1 (sdr) or x4(ddr) buswidth in boot operation mode (default) + 0x1 + x4 (sdr/ddr) buswidth in boot operation mode + 0x2 + x8 (sdr/ddr) buswidth in boot operation mode + 0x3 + Reserved
+ reset_boot_bus_width + 0x0 + Reset buswidth to x1, Single data reate and backward compatible timing after boot operation (default) + 0x1 + Retain BOOT_BUS_WIDTH and BOOT_MODE value after boot operation. This is relevant to Push-pull mode operation only
+ boot_mode + 0x0 + Use single data rate + backward compatible timing in boot operation (default) + 0x1 + Use single data rate + High Speed timing in boot operation mode + 0x2 + Use dual data rate in boot operation + 0x3 + Reserved
+The 'mmc partconf' command shows or changes PARTITION_CONFIG field.
+ boot_ack + boot acknowledge value + boot_partition + boot partition to enable for boot + 0x0 + Device not boot enabled(default) + 0x1 + Boot partition1 enabled for boot + 0x2 + Boot partition2 enabled for boot + 0x7 + User area enabled for boot + others + Reserved + partition_access + partitions to access
+The 'mmc bootpart-resize' command changes sizes of boot and RPMB partitions. + dev + device number + boot part size MB + target size of boot partition + RPMB part size MB + target size of RPMB partition
+The 'mmc rst-function' command changes the RST_n_FUNCTION field. +**WARNING** : This is a write-once field. (*Refer to eMMC specification*)
+ value + 0x0 + RST_n signal is temporarily disabled (default) + 0x1 + RST_n signal is permanently enabled + 0x2 + RST_n signal is permanently disabled + 0x3 + Reserved
+Examples +--------
+The 'mmc info' command displays device's capabilities: +::
+ => mmc info + Device: EXYNOS DWMMC + Manufacturer ID: 45 + OEM: 100 + Name: SDW16 + Bus Speed: 52000000 + Mode: MMC DDR52 (52MHz) + Rd Block Len: 512 + MMC version 5.0 + High Capacity: Yes + Capacity: 14.7 GiB + Bus Width: 8-bit DDR + Erase Group Size: 512 KiB + HC WP Group Size: 8 MiB + User Capacity: 14.7 GiB WRREL + Boot Capacity: 4 MiB ENH + RPMB Capacity: 4 MiB ENH + Boot area 0 is not write protected + Boot area 1 is not write protected
+The raw data can be read/written via 'mmc read/write' command: +::
+ => mmc read 0x40000000 0x5000 0x100 + MMC read: dev # 0, block # 20480, count 256 ... 256 blocks read: OK
+ => mmc write 0x40000000 0x5000 0x10 + MMC write: dev # 0, block # 20480, count 256 ... 256 blocks written: OK
+The partition list can be shown via 'mmc part' command: +::
+ => mmc part + Partition Map for MMC device 0 -- Partition Type: DOS
+ Part Start Sector Num Sectors UUID Type + 1 8192 131072 dff8751a-01 0e Boot + 2 139264 6291456 dff8751a-02 83 + 3 6430720 1048576 dff8751a-03 83 + 4 7479296 23298048 dff8751a-04 05 Extd + 5 7481344 307200 dff8751a-05 83 + 6 7790592 65536 dff8751a-06 83 + 7 7858176 16384 dff8751a-07 83 + 8 7876608 22900736 dff8751a-08 83
+The current device can be shown or set via 'mmc dev' command: +::
+ => mmc dev + switch to partitions #0, OK + mmc0(part0) is current device + => mmc dev 2 0 + switch to partitions #0, OK + mmc2 is current device
+The list of available devices can be shown via 'mmc list' command: +::
+ => mmc list + mmc list + EXYNOS DWMMC: 0 (eMMC) + EXYNOS DWMMC: 2 (SD)
+Configuration +-------------
+The mmc command is only available if CONFIG_CMD_MMC=y. +Some commands need to enable more configuration.
+write, erase + CONFIG_MMC_WRITE +bootbus, bootpart-resize, partconf, rst-function + CONFIG_SUPPORT_EMMC_BOOT=y
On 02.04.21 02:15, Jaehoon Chung wrote:
Provide a man-pages for the mmc command.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com
Changelog on V2
- Add missing empty line
- Add bootbus's arguments descriptions
doc/usage/index.rst | 1 + doc/usage/mmc.rst | 212 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 213 insertions(+) create mode 100644 doc/usage/mmc.rst
diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 6c59bbadab45..15c682ceface 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -30,6 +30,7 @@ Shell commands load loady mbr
- mmc pstore qfw sbi
diff --git a/doc/usage/mmc.rst b/doc/usage/mmc.rst new file mode 100644 index 000000000000..57284ed6741e --- /dev/null +++ b/doc/usage/mmc.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0+:
+mmc command +============
+Synopsis +--------
+::
- mmc info
- mmc read addr blk# cnt
- mmc write addr blk# cnt
- mmc erase blk# cnt
- mmc rescan
- mmc part
- mmc dev [dev] [part]
- mmc list
- mmc wp
- mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode>
- mmc bootpart-resize <dev> <dev part size MB> <RPMB part size MB>
- mmc partconf <dev> [boot_ack boot_partition partition_access]
- mmc rst-function <dev> <value>
+Description +-----------
+The mmc command is used to control MMC(eMMC/SD) device.
+The 'mmc info' command displays information (Manufacturer ID, OEM, Name, Bus Speed, Mode, ...) of MMC device.
+The 'mmc read' command reads raw data to memory address from MMC device with block offset and count.
+The 'mmc write' command writes raw data to MMC device from memory address with block offset and count.
- addr
memory address- blk#
start block offset- cnt
block count+The 'mmc erase' command erases MMC device from block offset until count.
Shouldn't this be:
The 'mmc erase' command erases *count* blocks on the MMC device starting at block *blk#*?
Best regards
Heinrich
- blk#
start block offset- cnt
block count
<snip />
On 4/23/21 11:23 PM, Heinrich Schuchardt wrote:
On 02.04.21 02:15, Jaehoon Chung wrote:
Provide a man-pages for the mmc command.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com
Changelog on V2
- Add missing empty line
- Add bootbus's arguments descriptions
doc/usage/index.rst | 1 + doc/usage/mmc.rst | 212 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 213 insertions(+) create mode 100644 doc/usage/mmc.rst
diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 6c59bbadab45..15c682ceface 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -30,6 +30,7 @@ Shell commands load loady mbr
- mmc pstore qfw sbi
diff --git a/doc/usage/mmc.rst b/doc/usage/mmc.rst new file mode 100644 index 000000000000..57284ed6741e --- /dev/null +++ b/doc/usage/mmc.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0+:
+mmc command +============
+Synopsis +--------
+::
- mmc info
- mmc read addr blk# cnt
- mmc write addr blk# cnt
- mmc erase blk# cnt
- mmc rescan
- mmc part
- mmc dev [dev] [part]
- mmc list
- mmc wp
- mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode>
- mmc bootpart-resize <dev> <dev part size MB> <RPMB part size MB>
- mmc partconf <dev> [boot_ack boot_partition partition_access]
- mmc rst-function <dev> <value>
+Description +-----------
+The mmc command is used to control MMC(eMMC/SD) device.
+The 'mmc info' command displays information (Manufacturer ID, OEM, Name, Bus Speed, Mode, ...) of MMC device.
+The 'mmc read' command reads raw data to memory address from MMC device with block offset and count.
+The 'mmc write' command writes raw data to MMC device from memory address with block offset and count.
- addr
memory address- blk#
start block offset- cnt
block count+The 'mmc erase' command erases MMC device from block offset until count.
Shouldn't this be:
The 'mmc erase' command erases *count* blocks on the MMC device starting at block *blk#*?
Will update.
Thanks!
Best Regards, Jaehoon Chung
Best regards
Heinrich
- blk#
start block offset- cnt
block count<snip />
participants (2)
-
Heinrich Schuchardt -
Jaehoon Chung