commit 419ea2d84 (mx28: Split the README into a common part and a m28 specific part) missed an entry in the Contents section that was part of the original file.

Add the missing entry for completeness.

Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Changes since v2: - Use 'into NAND' also in the middle of text rather than only in the Content section Change since v1: - Fix completion->completeness , for->into doc/README.mx28_common | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/doc/README.mx28_common b/doc/README.mx28_common index 448d221..f73978d 100644 --- a/doc/README.mx28_common +++ b/doc/README.mx28_common @@ -19,6 +19,7 @@ Contents 1) Prerequisites 2) Compiling U-Boot for a MX28 based board 3) Installation of U-Boot for a MX28 based board to SD card +4) Installation of U-Boot into NAND flash

1) Prerequisites ---------------- @@ -146,8 +147,8 @@ NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains a "-p" switch for that purpose. The "-p" switch takes the sector number as an argument.

-4) Installation of U-Boot for NAND flash ------------------------------------------------ +4) Installation of U-Boot into NAND flash +-----------------------------------------

To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.