[U-Boot] [PATCH 0/5] ARM: OMAP4/5: Add support to boot with device tree as default
With the kernel moving all towards device tree, this series adds support to make the device tree boot as the default for OMAP4/5 platforms.
Sricharan R (5): ARM: OMAP5: Rename omap5_evm.h to omap5_uevm.h ARM: OMAP5: Set fdt_high to enable booting with Device tree ARM: OMAP5: Support loading environment variables from txt file ARM: OMAP4/5: Change the default boot command to work with device tree ARM: OMAP4/5: Make bootz as the default boot command
board/ti/omap5_evm/Makefile | 49 ------- board/ti/omap5_evm/evm.c | 101 ------------- board/ti/omap5_evm/mux_data.h | 304 ---------------------------------------- board/ti/omap5_uevm/Makefile | 49 +++++++ board/ti/omap5_uevm/evm.c | 101 +++++++++++++ board/ti/omap5_uevm/mux_data.h | 304 ++++++++++++++++++++++++++++++++++++++++ boards.cfg | 2 +- include/configs/omap4_common.h | 16 ++- include/configs/omap5_common.h | 30 +++- include/configs/omap5_evm.h | 40 ------ include/configs/omap5_uevm.h | 40 ++++++ 11 files changed, 531 insertions(+), 505 deletions(-) delete mode 100644 board/ti/omap5_evm/Makefile delete mode 100644 board/ti/omap5_evm/evm.c delete mode 100644 board/ti/omap5_evm/mux_data.h create mode 100644 board/ti/omap5_uevm/Makefile create mode 100644 board/ti/omap5_uevm/evm.c create mode 100644 board/ti/omap5_uevm/mux_data.h delete mode 100644 include/configs/omap5_evm.h create mode 100644 include/configs/omap5_uevm.h
The omap5-uevm is the reference board name for OMAP5 soc based platform. So rename it accordingly.
Signed-off-by: Sricharan R r.sricharan@ti.com --- board/ti/omap5_evm/Makefile | 49 ------- board/ti/omap5_evm/evm.c | 101 ------------- board/ti/omap5_evm/mux_data.h | 304 ---------------------------------------- board/ti/omap5_uevm/Makefile | 49 +++++++ board/ti/omap5_uevm/evm.c | 101 +++++++++++++ board/ti/omap5_uevm/mux_data.h | 304 ++++++++++++++++++++++++++++++++++++++++ boards.cfg | 2 +- include/configs/omap5_evm.h | 40 ------ include/configs/omap5_uevm.h | 40 ++++++ 9 files changed, 495 insertions(+), 495 deletions(-) delete mode 100644 board/ti/omap5_evm/Makefile delete mode 100644 board/ti/omap5_evm/evm.c delete mode 100644 board/ti/omap5_evm/mux_data.h create mode 100644 board/ti/omap5_uevm/Makefile create mode 100644 board/ti/omap5_uevm/evm.c create mode 100644 board/ti/omap5_uevm/mux_data.h delete mode 100644 include/configs/omap5_evm.h create mode 100644 include/configs/omap5_uevm.h
diff --git a/board/ti/omap5_evm/Makefile b/board/ti/omap5_evm/Makefile deleted file mode 100644 index fa81d64..0000000 --- a/board/ti/omap5_evm/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := evm.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c deleted file mode 100644 index 55337c0..0000000 --- a/board/ti/omap5_evm/evm.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, <www.ti.com> - * Aneesh V aneesh@ti.com - * Steve Sakoman steve@sakoman.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <twl6035.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mmc_host_def.h> - -#include "mux_data.h" - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: OMAP5430 EVM\n" -}; - -/** - * @brief board_init - * - * @return 0 - */ -int board_init(void) -{ - gpmc_init(); - gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return 0; -} - -/** - * @brief misc_init_r - Configure EVM board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * @return 0 - */ -int misc_init_r(void) -{ -#ifdef CONFIG_TWL6035_POWER - twl6035_init_settings(); -#endif - return 0; -} - -void set_muxconf_regs_essential(void) -{ - do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); -} - -void set_muxconf_regs_non_essential(void) -{ - do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential, - sizeof(core_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential, - sizeof(wkup_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); -} - -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - return 0; -} -#endif diff --git a/board/ti/omap5_evm/mux_data.h b/board/ti/omap5_evm/mux_data.h deleted file mode 100644 index a82795d..0000000 --- a/board/ti/omap5_evm/mux_data.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, <www.ti.com> - * - * Sricharan R r.sricharan@ti.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _EVM5430_MUX_DATA_H -#define _EVM5430_MUX_DATA_H - -#include <asm/arch/mux_omap5.h> - -const struct pad_conf_entry core_padconf_array_essential[] = { - - {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */ - {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */ - {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */ - {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */ - {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */ - {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */ - {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */ - {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */ - {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */ - {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */ - {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */ - {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */ - {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0*/ - {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1*/ - {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2*/ - {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3*/ - {UART3_RX_IRRX, (PTU | IEN | M0)}, /* UART3_RX_IRRX */ - {UART3_TX_IRTX, (M0)}, /* UART3_TX_IRTX */ - {USBB1_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB1_HSIC_STROBE */ - {USBB1_HSIC_DATA, (PTU | IEN | M0)}, /* USBB1_HSIC_DATA */ - {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */ - {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */ - {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE*/ - {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */ - {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */ - {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */ - {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - - {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */ - {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */ - {SYS_32K, (IEN | M0)}, /* SYS_32K */ - -}; - -const struct pad_conf_entry core_padconf_array_non_essential[] = { - - {C2C_DATAIN0, (IEN | M0)}, /* C2C_DATAIN0 */ - {C2C_DATAIN1, (IEN | M0)}, /* C2C_DATAIN1 */ - {C2C_DATAIN2, (IEN | M0)}, /* C2C_DATAIN2 */ - {C2C_DATAIN3, (IEN | M0)}, /* C2C_DATAIN3 */ - {C2C_DATAIN4, (IEN | M0)}, /* C2C_DATAIN4 */ - {C2C_DATAIN5, (IEN | M0)}, /* C2C_DATAIN5 */ - {C2C_DATAIN6, (IEN | M0)}, /* C2C_DATAIN6 */ - {C2C_DATAIN7, (IEN | M0)}, /* C2C_DATAIN7 */ - {C2C_CLKIN1, (IEN | M0)}, /* C2C_CLKIN1 */ - {C2C_CLKIN0, (IEN | M0)}, /* C2C_CLKIN0 */ - {C2C_CLKOUT0, (M0)}, /* C2C_CLKOUT0 */ - {C2C_CLKOUT1, (M0)}, /* C2C_CLKOUT1 */ - {C2C_DATAOUT0, (M0)}, /* C2C_DATAOUT0 */ - {C2C_DATAOUT1, (M0)}, /* C2C_DATAOUT1 */ - {C2C_DATAOUT2, (M0)}, /* C2C_DATAOUT2 */ - {C2C_DATAOUT3, (M0)}, /* C2C_DATAOUT3 */ - {C2C_DATAOUT4, (M0)}, /* C2C_DATAOUT4 */ - {C2C_DATAOUT5, (M0)}, /* C2C_DATAOUT5 */ - {C2C_DATAOUT6, (M0)}, /* C2C_DATAOUT6 */ - {C2C_DATAOUT7, (M0)}, /* C2C_DATAOUT7 */ - {C2C_DATA8, (IEN | M0)}, /* C2C_DATA8 */ - {C2C_DATA9, (IEN | M0)}, /* C2C_DATA9 */ - {C2C_DATA10, (IEN | M0)}, /* C2C_DATA10 */ - {C2C_DATA11, (IEN | M0)}, /* C2C_DATA11 */ - {C2C_DATA12, (IEN | M0)}, /* C2C_DATA12 */ - {C2C_DATA13, (IEN | M0)}, /* C2C_DATA13 */ - {C2C_DATA14, (IEN | M0)}, /* C2C_DATA14 */ - {C2C_DATA15, (IEN | M0)}, /* C2C_DATA15 */ - {LLIB_WAKEREQOUT, (PTU | IEN | M6)}, /* GPIO2_32 */ - {LLIA_WAKEREQOUT, (M1)}, /* C2C_WAKEREQOUT */ - {HSI1_ACREADY, (PTD | M6)}, /* GPIO3_64 */ - {HSI1_CAREADY, (PTD | M6)}, /* GPIO3_65 */ - {HSI1_ACWAKE, (PTD | IEN | M6)}, /* GPIO3_66 */ - {HSI1_CAWAKE, (PTU | IEN | M6)}, /* GPIO3_67 */ - {HSI1_ACFLAG, (PTD | IEN | M6)}, /* GPIO3_68 */ - {HSI1_ACDATA, (PTD | M6)}, /* GPIO3_69 */ - {HSI1_CAFLAG, (M6)}, /* GPIO3_70 */ - {HSI1_CADATA, (M6)}, /* GPIO3_71 */ - {UART1_TX, (M0)}, /* UART1_TX */ - {UART1_CTS, (PTU | IEN | M0)}, /* UART1_CTS */ - {UART1_RX, (PTU | IEN | M0)}, /* UART1_RX */ - {UART1_RTS, (M0)}, /* UART1_RTS */ - {HSI2_CAREADY, (IEN | M0)}, /* HSI2_CAREADY */ - {HSI2_ACREADY, (OFF_EN | M0)}, /* HSI2_ACREADY */ - {HSI2_CAWAKE, (IEN | PTD | M0)}, /* HSI2_CAWAKE */ - {HSI2_ACWAKE, (M0)}, /* HSI2_ACWAKE */ - {HSI2_CAFLAG, (IEN | PTD | M0)}, /* HSI2_CAFLAG */ - {HSI2_CADATA, (IEN | PTD | M0)}, /* HSI2_CADATA */ - {HSI2_ACFLAG, (M0)}, /* HSI2_ACFLAG */ - {HSI2_ACDATA, (M0)}, /* HSI2_ACDATA */ - {UART2_RTS, (IEN | M1)}, /* MCSPI3_SOMI */ - {UART2_CTS, (IEN | M1)}, /* MCSPI3_CS0 */ - {UART2_RX, (IEN | M1)}, /* MCSPI3_SIMO */ - {UART2_TX, (IEN | M1)}, /* MCSPI3_CLK */ - {TIMER10_PWM_EVT, (IEN | M0)}, /* TIMER10_PWM_EVT */ - {DSIPORTA_TE0, (IEN | M0)}, /* DSIPORTA_TE0 */ - {DSIPORTA_LANE0X, (IEN | M0)}, /* DSIPORTA_LANE0X */ - {DSIPORTA_LANE0Y, (IEN | M0)}, /* DSIPORTA_LANE0Y */ - {DSIPORTA_LANE1X, (IEN | M0)}, /* DSIPORTA_LANE1X */ - {DSIPORTA_LANE1Y, (IEN | M0)}, /* DSIPORTA_LANE1Y */ - {DSIPORTA_LANE2X, (IEN | M0)}, /* DSIPORTA_LANE2X */ - {DSIPORTA_LANE2Y, (IEN | M0)}, /* DSIPORTA_LANE2Y */ - {DSIPORTA_LANE3X, (IEN | M0)}, /* DSIPORTA_LANE3X */ - {DSIPORTA_LANE3Y, (IEN | M0)}, /* DSIPORTA_LANE3Y */ - {DSIPORTA_LANE4X, (IEN | M0)}, /* DSIPORTA_LANE4X */ - {DSIPORTA_LANE4Y, (IEN | M0)}, /* DSIPORTA_LANE4Y */ - {TIMER9_PWM_EVT, (IEN | M0)}, /* TIMER9_PWM_EVT */ - {DSIPORTC_TE0, (IEN | M0)}, /* DSIPORTC_TE0 */ - {DSIPORTC_LANE0X, (IEN | M0)}, /* DSIPORTC_LANE0X */ - {DSIPORTC_LANE0Y, (IEN | M0)}, /* DSIPORTC_LANE0Y */ - {DSIPORTC_LANE1X, (IEN | M0)}, /* DSIPORTC_LANE1X */ - {DSIPORTC_LANE1Y, (IEN | M0)}, /* DSIPORTC_LANE1Y */ - {DSIPORTC_LANE2X, (IEN | M0)}, /* DSIPORTC_LANE2X */ - {DSIPORTC_LANE2Y, (IEN | M0)}, /* DSIPORTC_LANE2Y */ - {DSIPORTC_LANE3X, (IEN | M0)}, /* DSIPORTC_LANE3X */ - {DSIPORTC_LANE3Y, (IEN | M0)}, /* DSIPORTC_LANE3Y */ - {DSIPORTC_LANE4X, (IEN | M0)}, /* DSIPORTC_LANE4X */ - {DSIPORTC_LANE4Y, (IEN | M0)}, /* DSIPORTC_LANE4Y */ - {RFBI_HSYNC0, (M4)}, /* KBD_COL5 */ - {RFBI_TE_VSYNC0, (PTD | M6)}, /* GPIO6_161 */ - {RFBI_RE, (M4)}, /* KBD_COL4 */ - {RFBI_A0, (PTD | IEN | M6)}, /* GPIO6_165 */ - {RFBI_DATA8, (M4)}, /* KBD_COL3 */ - {RFBI_DATA9, (PTD | M6)}, /* GPIO6_175 */ - {RFBI_DATA10, (PTD | M6)}, /* GPIO6_176 */ - {RFBI_DATA11, (PTD | M6)}, /* GPIO6_177 */ - {RFBI_DATA12, (PTD | M6)}, /* GPIO6_178 */ - {RFBI_DATA13, (PTU | IEN | M6)}, /* GPIO6_179 */ - {RFBI_DATA14, (M4)}, /* KBD_COL7 */ - {RFBI_DATA15, (M4)}, /* KBD_COL6 */ - {GPIO6_182, (M6)}, /* GPIO6_182 */ - {GPIO6_183, (PTD | M6)}, /* GPIO6_183 */ - {GPIO6_184, (M4)}, /* KBD_COL2 */ - {GPIO6_185, (PTD | IEN | M6)}, /* GPIO6_185 */ - {GPIO6_186, (PTD | M6)}, /* GPIO6_186 */ - {GPIO6_187, (PTU | IEN | M4)}, /* KBD_ROW2 */ - {RFBI_DATA0, (PTD | M6)}, /* GPIO6_166 */ - {RFBI_DATA1, (PTD | M6)}, /* GPIO6_167 */ - {RFBI_DATA2, (PTD | M6)}, /* GPIO6_168 */ - {RFBI_DATA3, (PTD | IEN | M6)}, /* GPIO6_169 */ - {RFBI_DATA4, (IEN | M6)}, /* GPIO6_170 */ - {RFBI_DATA5, (IEN | M6)}, /* GPIO6_171 */ - {RFBI_DATA6, (PTD | M6)}, /* GPIO6_172 */ - {RFBI_DATA7, (PTD | M6)}, /* GPIO6_173 */ - {RFBI_CS0, (PTD | IEN | M6)}, /* GPIO6_163 */ - {RFBI_WE, (PTD | M6)}, /* GPIO6_162 */ - {MCSPI2_CS0, (M0)}, /* MCSPI2_CS0 */ - {MCSPI2_CLK, (IEN | M0)}, /* MCSPI2_CLK */ - {MCSPI2_SIMO, (IEN | M0)}, /* MCSPI2_SIMO*/ - {MCSPI2_SOMI, (PTU | IEN | M0)}, /* MCSPI2_SOMI*/ - {I2C4_SCL, (IEN | M0)}, /* I2C4_SCL */ - {I2C4_SDA, (IEN | M0)}, /* I2C4_SDA */ - {HDMI_CEC, (IEN | M0)}, /* HDMI_CEC */ - {HDMI_HPD, (PTD | IEN | M0)}, /* HDMI_HPD */ - {HDMI_DDC_SCL, (IEN | M0)}, /* HDMI_DDC_SCL */ - {HDMI_DDC_SDA, (IEN | M0)}, /* HDMI_DDC_SDA */ - {CSIPORTA_LANE0X, (IEN | M0)}, /* CSIPORTA_LANE0X */ - {CSIPORTA_LANE0Y, (IEN | M0)}, /* CSIPORTA_LANE0Y */ - {CSIPORTA_LANE1Y, (IEN | M0)}, /* CSIPORTA_LANE1Y */ - {CSIPORTA_LANE1X, (IEN | M0)}, /* CSIPORTA_LANE1X */ - {CSIPORTA_LANE2Y, (IEN | M0)}, /* CSIPORTA_LANE2Y */ - {CSIPORTA_LANE2X, (IEN | M0)}, /* CSIPORTA_LANE2X */ - {CSIPORTA_LANE3X, (IEN | M0)}, /* CSIPORTA_LANE3X */ - {CSIPORTA_LANE3Y, (IEN | M0)}, /* CSIPORTA_LANE3Y */ - {CSIPORTA_LANE4X, (IEN | M0)}, /* CSIPORTA_LANE4X */ - {CSIPORTA_LANE4Y, (IEN | M0)}, /* CSIPORTA_LANE4Y */ - {CSIPORTB_LANE0X, (IEN | M0)}, /* CSIPORTB_LANE0X */ - {CSIPORTB_LANE0Y, (IEN | M0)}, /* CSIPORTB_LANE0Y */ - {CSIPORTB_LANE1Y, (IEN | M0)}, /* CSIPORTB_LANE1Y */ - {CSIPORTB_LANE1X, (IEN | M0)}, /* CSIPORTB_LANE1X */ - {CSIPORTB_LANE2Y, (IEN | M0)}, /* CSIPORTB_LANE2Y */ - {CSIPORTB_LANE2X, (IEN | M0)}, /* CSIPORTB_LANE2X */ - {CSIPORTC_LANE0Y, (IEN | M0)}, /* CSIPORTC_LANE0Y */ - {CSIPORTC_LANE0X, (IEN | M0)}, /* CSIPORTC_LANE0X */ - {CSIPORTC_LANE1Y, (IEN | M0)}, /* CSIPORTC_LANE1Y */ - {CSIPORTC_LANE1X, (IEN | M0)}, /* CSIPORTC_LANE1X */ - {CAM_SHUTTER, (M0)}, /* CAM_SHUTTER */ - {CAM_STROBE, (M0)}, /* CAM_STROBE */ - {CAM_GLOBALRESET, (IEN | M0)}, /* CAM_GLOBALRESET */ - {TIMER11_PWM_EVT, (PTD | M6)}, /* GPIO8_227 */ - {TIMER5_PWM_EVT, (PTD | M6)}, /* GPIO8_228 */ - {TIMER6_PWM_EVT, (PTD | M6)}, /* GPIO8_229 */ - {TIMER8_PWM_EVT, (PTU | M6)}, /* GPIO8_230 */ - {I2C3_SCL, (IEN | M0)}, /* I2C3_SCL */ - {I2C3_SDA, (IEN | M0)}, /* I2C3_SDA */ - {GPIO8_233, (IEN | M2)}, /* TIMER8_PWM_EVT */ - {ABE_CLKS, (IEN | M0)}, /* ABE_CLKS */ - {ABEDMIC_DIN1, (IEN | M0)}, /* ABEDMIC_DIN1 */ - {ABEDMIC_DIN2, (IEN | M0)}, /* ABEDMIC_DIN2 */ - {ABEDMIC_DIN3, (IEN | M0)}, /* ABEDMIC_DIN3 */ - {ABEDMIC_CLK1, (M0)}, /* ABEDMIC_CLK1 */ - {ABEDMIC_CLK2, (IEN | M1)}, /* ABEMCBSP1_FSX */ - {ABEDMIC_CLK3, (M1)}, /* ABEMCBSP1_DX */ - {ABESLIMBUS1_CLOCK, (IEN | M1)}, /* ABEMCBSP1_CLKX */ - {ABESLIMBUS1_DATA, (IEN | M1)}, /* ABEMCBSP1_DR */ - {ABEMCBSP2_DR, (IEN | M0)}, /* ABEMCBSP2_DR */ - {ABEMCBSP2_DX, (M0)}, /* ABEMCBSP2_DX */ - {ABEMCBSP2_FSX, (IEN | M0)}, /* ABEMCBSP2_FSX */ - {ABEMCBSP2_CLKX, (IEN | M0)}, /* ABEMCBSP2_CLKX */ - {ABEMCPDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_UL_DATA */ - {ABEMCPDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_DL_DATA */ - {ABEMCPDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_FRAME */ - {ABEMCPDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_LB_CLK */ - {WLSDIO_CLK, (PTU | IEN | M0)}, /* WLSDIO_CLK */ - {WLSDIO_CMD, (PTU | IEN | M0)}, /* WLSDIO_CMD */ - {WLSDIO_DATA0, (PTU | IEN | M0)}, /* WLSDIO_DATA0*/ - {WLSDIO_DATA1, (PTU | IEN | M0)}, /* WLSDIO_DATA1*/ - {WLSDIO_DATA2, (PTU | IEN | M0)}, /* WLSDIO_DATA2*/ - {WLSDIO_DATA3, (PTU | IEN | M0)}, /* WLSDIO_DATA3*/ - {UART5_RX, (PTU | IEN | M0)}, /* UART5_RX */ - {UART5_TX, (M0)}, /* UART5_TX */ - {UART5_CTS, (PTU | IEN | M0)}, /* UART5_CTS */ - {UART5_RTS, (M0)}, /* UART5_RTS */ - {I2C2_SCL, (IEN | M0)}, /* I2C2_SCL */ - {I2C2_SDA, (IEN | M0)}, /* I2C2_SDA */ - {MCSPI1_CLK, (M6)}, /* GPIO5_140 */ - {MCSPI1_SOMI, (IEN | M6)}, /* GPIO5_141 */ - {MCSPI1_SIMO, (PTD | M6)}, /* GPIO5_142 */ - {MCSPI1_CS0, (PTD | M6)}, /* GPIO5_143 */ - {MCSPI1_CS1, (PTD | IEN | M6)}, /* GPIO5_144 */ - {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */ - {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */ - {PERSLIMBUS2_CLOCK, (PTD | M6)}, /* GPIO5_145 */ - {PERSLIMBUS2_DATA, (PTD | IEN | M6)}, /* GPIO5_146 */ - {UART6_TX, (PTU | IEN | M6)}, /* GPIO5_149 */ - {UART6_RX, (PTU | IEN | M6)}, /* GPIO5_150 */ - {UART6_CTS, (PTU | IEN | M6)}, /* GPIO5_151 */ - {UART6_RTS, (PTU | M0)}, /* UART6_RTS */ - {UART3_CTS_RCTX, (PTU | IEN | M6)}, /* GPIO5_153 */ - {UART3_RTS_IRSD, (PTU | IEN | M1)}, /* HDQ_SIO */ - {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */ - {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */ - -}; - -const struct pad_conf_entry wkup_padconf_array_non_essential[] = { - -/* - * This pad keeps C2C Module always enabled. - * Putting this in safe mode do not cause the issue. - * C2C driver could enable this mux setting if needed. - */ - {LLIA_WAKEREQIN, (M7)}, /* SAFE MODE */ - {LLIB_WAKEREQIN, (M7)}, /* SAFE MODE */ - {DRM_EMU0, (PTU | IEN | M0)}, /* DRM_EMU0 */ - {DRM_EMU1, (PTU | IEN | M0)}, /* DRM_EMU1 */ - {JTAG_NTRST, (IEN | M0)}, /* JTAG_NTRST */ - {JTAG_TCK, (IEN | M0)}, /* JTAG_TCK */ - {JTAG_RTCK, (M0)}, /* JTAG_RTCK */ - {JTAG_TMSC, (IEN | M0)}, /* JTAG_TMSC */ - {JTAG_TDI, (IEN | M0)}, /* JTAG_TDI */ - {JTAG_TDO, (M0)}, /* JTAG_TDO */ - {FREF_CLK_IOREQ, (IEN | M0)}, /* FREF_CLK_IOREQ */ - {FREF_CLK0_OUT, (M0)}, /* FREF_CLK0_OUT */ - {FREF_CLK1_OUT, (M0)}, /* FREF_CLK1_OUT */ - {FREF_CLK2_OUT, (M0)}, /* FREF_CLK2_OUT */ - {FREF_CLK2_REQ, (PTU | IEN | M6)}, /* GPIO1_WK9 */ - {FREF_CLK1_REQ, (PTD | IEN | M6)}, /* GPIO1_WK8 */ - {SYS_NRESPWRON, (IEN | M0)}, /* SYS_NRESPWRON */ - {SYS_NRESWARM, (PTU | IEN | M0)}, /* SYS_NRESWARM */ - {SYS_PWR_REQ, (M0)}, /* SYS_PWR_REQ */ - {SYS_NIRQ1, (PTU | IEN | M0)}, /* SYS_NIRQ1 */ - {SYS_NIRQ2, (PTU | IEN | M0)}, /* SYS_NIRQ2 */ - {SYS_BOOT0, (IEN | M0)}, /* SYS_BOOT0 */ - {SYS_BOOT1, (IEN | M0)}, /* SYS_BOOT1 */ - {SYS_BOOT2, (IEN | M0)}, /* SYS_BOOT2 */ - {SYS_BOOT3, (IEN | M0)}, /* SYS_BOOT3 */ - {SYS_BOOT4, (IEN | M0)}, /* SYS_BOOT4 */ - {SYS_BOOT5, (IEN | M0)}, /* SYS_BOOT5 */ - -}; - -#endif /* _EVM4430_MUX_DATA_H */ diff --git a/board/ti/omap5_uevm/Makefile b/board/ti/omap5_uevm/Makefile new file mode 100644 index 0000000..fa81d64 --- /dev/null +++ b/board/ti/omap5_uevm/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := evm.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c new file mode 100644 index 0000000..55337c0 --- /dev/null +++ b/board/ti/omap5_uevm/evm.c @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * Aneesh V aneesh@ti.com + * Steve Sakoman steve@sakoman.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl6035.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> + +#include "mux_data.h" + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: OMAP5430 EVM\n" +}; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure EVM board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ +#ifdef CONFIG_TWL6035_POWER + twl6035_init_settings(); +#endif + return 0; +} + +void set_muxconf_regs_essential(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, + sizeof(wkup_padconf_array_essential) / + sizeof(struct pad_conf_entry)); +} + +void set_muxconf_regs_non_essential(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential, + sizeof(core_padconf_array_non_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential, + sizeof(wkup_padconf_array_non_essential) / + sizeof(struct pad_conf_entry)); +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); + return 0; +} +#endif diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h new file mode 100644 index 0000000..a82795d --- /dev/null +++ b/board/ti/omap5_uevm/mux_data.h @@ -0,0 +1,304 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * + * Sricharan R r.sricharan@ti.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _EVM5430_MUX_DATA_H +#define _EVM5430_MUX_DATA_H + +#include <asm/arch/mux_omap5.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + + {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */ + {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */ + {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */ + {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */ + {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */ + {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */ + {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */ + {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */ + {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */ + {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */ + {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */ + {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */ + {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0*/ + {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1*/ + {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2*/ + {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3*/ + {UART3_RX_IRRX, (PTU | IEN | M0)}, /* UART3_RX_IRRX */ + {UART3_TX_IRTX, (M0)}, /* UART3_TX_IRTX */ + {USBB1_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB1_HSIC_STROBE */ + {USBB1_HSIC_DATA, (PTU | IEN | M0)}, /* USBB1_HSIC_DATA */ + {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */ + {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */ + {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE*/ + {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */ + {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */ + {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */ + {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ + +}; + +const struct pad_conf_entry wkup_padconf_array_essential[] = { + + {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */ + {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */ + {SYS_32K, (IEN | M0)}, /* SYS_32K */ + +}; + +const struct pad_conf_entry core_padconf_array_non_essential[] = { + + {C2C_DATAIN0, (IEN | M0)}, /* C2C_DATAIN0 */ + {C2C_DATAIN1, (IEN | M0)}, /* C2C_DATAIN1 */ + {C2C_DATAIN2, (IEN | M0)}, /* C2C_DATAIN2 */ + {C2C_DATAIN3, (IEN | M0)}, /* C2C_DATAIN3 */ + {C2C_DATAIN4, (IEN | M0)}, /* C2C_DATAIN4 */ + {C2C_DATAIN5, (IEN | M0)}, /* C2C_DATAIN5 */ + {C2C_DATAIN6, (IEN | M0)}, /* C2C_DATAIN6 */ + {C2C_DATAIN7, (IEN | M0)}, /* C2C_DATAIN7 */ + {C2C_CLKIN1, (IEN | M0)}, /* C2C_CLKIN1 */ + {C2C_CLKIN0, (IEN | M0)}, /* C2C_CLKIN0 */ + {C2C_CLKOUT0, (M0)}, /* C2C_CLKOUT0 */ + {C2C_CLKOUT1, (M0)}, /* C2C_CLKOUT1 */ + {C2C_DATAOUT0, (M0)}, /* C2C_DATAOUT0 */ + {C2C_DATAOUT1, (M0)}, /* C2C_DATAOUT1 */ + {C2C_DATAOUT2, (M0)}, /* C2C_DATAOUT2 */ + {C2C_DATAOUT3, (M0)}, /* C2C_DATAOUT3 */ + {C2C_DATAOUT4, (M0)}, /* C2C_DATAOUT4 */ + {C2C_DATAOUT5, (M0)}, /* C2C_DATAOUT5 */ + {C2C_DATAOUT6, (M0)}, /* C2C_DATAOUT6 */ + {C2C_DATAOUT7, (M0)}, /* C2C_DATAOUT7 */ + {C2C_DATA8, (IEN | M0)}, /* C2C_DATA8 */ + {C2C_DATA9, (IEN | M0)}, /* C2C_DATA9 */ + {C2C_DATA10, (IEN | M0)}, /* C2C_DATA10 */ + {C2C_DATA11, (IEN | M0)}, /* C2C_DATA11 */ + {C2C_DATA12, (IEN | M0)}, /* C2C_DATA12 */ + {C2C_DATA13, (IEN | M0)}, /* C2C_DATA13 */ + {C2C_DATA14, (IEN | M0)}, /* C2C_DATA14 */ + {C2C_DATA15, (IEN | M0)}, /* C2C_DATA15 */ + {LLIB_WAKEREQOUT, (PTU | IEN | M6)}, /* GPIO2_32 */ + {LLIA_WAKEREQOUT, (M1)}, /* C2C_WAKEREQOUT */ + {HSI1_ACREADY, (PTD | M6)}, /* GPIO3_64 */ + {HSI1_CAREADY, (PTD | M6)}, /* GPIO3_65 */ + {HSI1_ACWAKE, (PTD | IEN | M6)}, /* GPIO3_66 */ + {HSI1_CAWAKE, (PTU | IEN | M6)}, /* GPIO3_67 */ + {HSI1_ACFLAG, (PTD | IEN | M6)}, /* GPIO3_68 */ + {HSI1_ACDATA, (PTD | M6)}, /* GPIO3_69 */ + {HSI1_CAFLAG, (M6)}, /* GPIO3_70 */ + {HSI1_CADATA, (M6)}, /* GPIO3_71 */ + {UART1_TX, (M0)}, /* UART1_TX */ + {UART1_CTS, (PTU | IEN | M0)}, /* UART1_CTS */ + {UART1_RX, (PTU | IEN | M0)}, /* UART1_RX */ + {UART1_RTS, (M0)}, /* UART1_RTS */ + {HSI2_CAREADY, (IEN | M0)}, /* HSI2_CAREADY */ + {HSI2_ACREADY, (OFF_EN | M0)}, /* HSI2_ACREADY */ + {HSI2_CAWAKE, (IEN | PTD | M0)}, /* HSI2_CAWAKE */ + {HSI2_ACWAKE, (M0)}, /* HSI2_ACWAKE */ + {HSI2_CAFLAG, (IEN | PTD | M0)}, /* HSI2_CAFLAG */ + {HSI2_CADATA, (IEN | PTD | M0)}, /* HSI2_CADATA */ + {HSI2_ACFLAG, (M0)}, /* HSI2_ACFLAG */ + {HSI2_ACDATA, (M0)}, /* HSI2_ACDATA */ + {UART2_RTS, (IEN | M1)}, /* MCSPI3_SOMI */ + {UART2_CTS, (IEN | M1)}, /* MCSPI3_CS0 */ + {UART2_RX, (IEN | M1)}, /* MCSPI3_SIMO */ + {UART2_TX, (IEN | M1)}, /* MCSPI3_CLK */ + {TIMER10_PWM_EVT, (IEN | M0)}, /* TIMER10_PWM_EVT */ + {DSIPORTA_TE0, (IEN | M0)}, /* DSIPORTA_TE0 */ + {DSIPORTA_LANE0X, (IEN | M0)}, /* DSIPORTA_LANE0X */ + {DSIPORTA_LANE0Y, (IEN | M0)}, /* DSIPORTA_LANE0Y */ + {DSIPORTA_LANE1X, (IEN | M0)}, /* DSIPORTA_LANE1X */ + {DSIPORTA_LANE1Y, (IEN | M0)}, /* DSIPORTA_LANE1Y */ + {DSIPORTA_LANE2X, (IEN | M0)}, /* DSIPORTA_LANE2X */ + {DSIPORTA_LANE2Y, (IEN | M0)}, /* DSIPORTA_LANE2Y */ + {DSIPORTA_LANE3X, (IEN | M0)}, /* DSIPORTA_LANE3X */ + {DSIPORTA_LANE3Y, (IEN | M0)}, /* DSIPORTA_LANE3Y */ + {DSIPORTA_LANE4X, (IEN | M0)}, /* DSIPORTA_LANE4X */ + {DSIPORTA_LANE4Y, (IEN | M0)}, /* DSIPORTA_LANE4Y */ + {TIMER9_PWM_EVT, (IEN | M0)}, /* TIMER9_PWM_EVT */ + {DSIPORTC_TE0, (IEN | M0)}, /* DSIPORTC_TE0 */ + {DSIPORTC_LANE0X, (IEN | M0)}, /* DSIPORTC_LANE0X */ + {DSIPORTC_LANE0Y, (IEN | M0)}, /* DSIPORTC_LANE0Y */ + {DSIPORTC_LANE1X, (IEN | M0)}, /* DSIPORTC_LANE1X */ + {DSIPORTC_LANE1Y, (IEN | M0)}, /* DSIPORTC_LANE1Y */ + {DSIPORTC_LANE2X, (IEN | M0)}, /* DSIPORTC_LANE2X */ + {DSIPORTC_LANE2Y, (IEN | M0)}, /* DSIPORTC_LANE2Y */ + {DSIPORTC_LANE3X, (IEN | M0)}, /* DSIPORTC_LANE3X */ + {DSIPORTC_LANE3Y, (IEN | M0)}, /* DSIPORTC_LANE3Y */ + {DSIPORTC_LANE4X, (IEN | M0)}, /* DSIPORTC_LANE4X */ + {DSIPORTC_LANE4Y, (IEN | M0)}, /* DSIPORTC_LANE4Y */ + {RFBI_HSYNC0, (M4)}, /* KBD_COL5 */ + {RFBI_TE_VSYNC0, (PTD | M6)}, /* GPIO6_161 */ + {RFBI_RE, (M4)}, /* KBD_COL4 */ + {RFBI_A0, (PTD | IEN | M6)}, /* GPIO6_165 */ + {RFBI_DATA8, (M4)}, /* KBD_COL3 */ + {RFBI_DATA9, (PTD | M6)}, /* GPIO6_175 */ + {RFBI_DATA10, (PTD | M6)}, /* GPIO6_176 */ + {RFBI_DATA11, (PTD | M6)}, /* GPIO6_177 */ + {RFBI_DATA12, (PTD | M6)}, /* GPIO6_178 */ + {RFBI_DATA13, (PTU | IEN | M6)}, /* GPIO6_179 */ + {RFBI_DATA14, (M4)}, /* KBD_COL7 */ + {RFBI_DATA15, (M4)}, /* KBD_COL6 */ + {GPIO6_182, (M6)}, /* GPIO6_182 */ + {GPIO6_183, (PTD | M6)}, /* GPIO6_183 */ + {GPIO6_184, (M4)}, /* KBD_COL2 */ + {GPIO6_185, (PTD | IEN | M6)}, /* GPIO6_185 */ + {GPIO6_186, (PTD | M6)}, /* GPIO6_186 */ + {GPIO6_187, (PTU | IEN | M4)}, /* KBD_ROW2 */ + {RFBI_DATA0, (PTD | M6)}, /* GPIO6_166 */ + {RFBI_DATA1, (PTD | M6)}, /* GPIO6_167 */ + {RFBI_DATA2, (PTD | M6)}, /* GPIO6_168 */ + {RFBI_DATA3, (PTD | IEN | M6)}, /* GPIO6_169 */ + {RFBI_DATA4, (IEN | M6)}, /* GPIO6_170 */ + {RFBI_DATA5, (IEN | M6)}, /* GPIO6_171 */ + {RFBI_DATA6, (PTD | M6)}, /* GPIO6_172 */ + {RFBI_DATA7, (PTD | M6)}, /* GPIO6_173 */ + {RFBI_CS0, (PTD | IEN | M6)}, /* GPIO6_163 */ + {RFBI_WE, (PTD | M6)}, /* GPIO6_162 */ + {MCSPI2_CS0, (M0)}, /* MCSPI2_CS0 */ + {MCSPI2_CLK, (IEN | M0)}, /* MCSPI2_CLK */ + {MCSPI2_SIMO, (IEN | M0)}, /* MCSPI2_SIMO*/ + {MCSPI2_SOMI, (PTU | IEN | M0)}, /* MCSPI2_SOMI*/ + {I2C4_SCL, (IEN | M0)}, /* I2C4_SCL */ + {I2C4_SDA, (IEN | M0)}, /* I2C4_SDA */ + {HDMI_CEC, (IEN | M0)}, /* HDMI_CEC */ + {HDMI_HPD, (PTD | IEN | M0)}, /* HDMI_HPD */ + {HDMI_DDC_SCL, (IEN | M0)}, /* HDMI_DDC_SCL */ + {HDMI_DDC_SDA, (IEN | M0)}, /* HDMI_DDC_SDA */ + {CSIPORTA_LANE0X, (IEN | M0)}, /* CSIPORTA_LANE0X */ + {CSIPORTA_LANE0Y, (IEN | M0)}, /* CSIPORTA_LANE0Y */ + {CSIPORTA_LANE1Y, (IEN | M0)}, /* CSIPORTA_LANE1Y */ + {CSIPORTA_LANE1X, (IEN | M0)}, /* CSIPORTA_LANE1X */ + {CSIPORTA_LANE2Y, (IEN | M0)}, /* CSIPORTA_LANE2Y */ + {CSIPORTA_LANE2X, (IEN | M0)}, /* CSIPORTA_LANE2X */ + {CSIPORTA_LANE3X, (IEN | M0)}, /* CSIPORTA_LANE3X */ + {CSIPORTA_LANE3Y, (IEN | M0)}, /* CSIPORTA_LANE3Y */ + {CSIPORTA_LANE4X, (IEN | M0)}, /* CSIPORTA_LANE4X */ + {CSIPORTA_LANE4Y, (IEN | M0)}, /* CSIPORTA_LANE4Y */ + {CSIPORTB_LANE0X, (IEN | M0)}, /* CSIPORTB_LANE0X */ + {CSIPORTB_LANE0Y, (IEN | M0)}, /* CSIPORTB_LANE0Y */ + {CSIPORTB_LANE1Y, (IEN | M0)}, /* CSIPORTB_LANE1Y */ + {CSIPORTB_LANE1X, (IEN | M0)}, /* CSIPORTB_LANE1X */ + {CSIPORTB_LANE2Y, (IEN | M0)}, /* CSIPORTB_LANE2Y */ + {CSIPORTB_LANE2X, (IEN | M0)}, /* CSIPORTB_LANE2X */ + {CSIPORTC_LANE0Y, (IEN | M0)}, /* CSIPORTC_LANE0Y */ + {CSIPORTC_LANE0X, (IEN | M0)}, /* CSIPORTC_LANE0X */ + {CSIPORTC_LANE1Y, (IEN | M0)}, /* CSIPORTC_LANE1Y */ + {CSIPORTC_LANE1X, (IEN | M0)}, /* CSIPORTC_LANE1X */ + {CAM_SHUTTER, (M0)}, /* CAM_SHUTTER */ + {CAM_STROBE, (M0)}, /* CAM_STROBE */ + {CAM_GLOBALRESET, (IEN | M0)}, /* CAM_GLOBALRESET */ + {TIMER11_PWM_EVT, (PTD | M6)}, /* GPIO8_227 */ + {TIMER5_PWM_EVT, (PTD | M6)}, /* GPIO8_228 */ + {TIMER6_PWM_EVT, (PTD | M6)}, /* GPIO8_229 */ + {TIMER8_PWM_EVT, (PTU | M6)}, /* GPIO8_230 */ + {I2C3_SCL, (IEN | M0)}, /* I2C3_SCL */ + {I2C3_SDA, (IEN | M0)}, /* I2C3_SDA */ + {GPIO8_233, (IEN | M2)}, /* TIMER8_PWM_EVT */ + {ABE_CLKS, (IEN | M0)}, /* ABE_CLKS */ + {ABEDMIC_DIN1, (IEN | M0)}, /* ABEDMIC_DIN1 */ + {ABEDMIC_DIN2, (IEN | M0)}, /* ABEDMIC_DIN2 */ + {ABEDMIC_DIN3, (IEN | M0)}, /* ABEDMIC_DIN3 */ + {ABEDMIC_CLK1, (M0)}, /* ABEDMIC_CLK1 */ + {ABEDMIC_CLK2, (IEN | M1)}, /* ABEMCBSP1_FSX */ + {ABEDMIC_CLK3, (M1)}, /* ABEMCBSP1_DX */ + {ABESLIMBUS1_CLOCK, (IEN | M1)}, /* ABEMCBSP1_CLKX */ + {ABESLIMBUS1_DATA, (IEN | M1)}, /* ABEMCBSP1_DR */ + {ABEMCBSP2_DR, (IEN | M0)}, /* ABEMCBSP2_DR */ + {ABEMCBSP2_DX, (M0)}, /* ABEMCBSP2_DX */ + {ABEMCBSP2_FSX, (IEN | M0)}, /* ABEMCBSP2_FSX */ + {ABEMCBSP2_CLKX, (IEN | M0)}, /* ABEMCBSP2_CLKX */ + {ABEMCPDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_UL_DATA */ + {ABEMCPDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_DL_DATA */ + {ABEMCPDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_FRAME */ + {ABEMCPDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_LB_CLK */ + {WLSDIO_CLK, (PTU | IEN | M0)}, /* WLSDIO_CLK */ + {WLSDIO_CMD, (PTU | IEN | M0)}, /* WLSDIO_CMD */ + {WLSDIO_DATA0, (PTU | IEN | M0)}, /* WLSDIO_DATA0*/ + {WLSDIO_DATA1, (PTU | IEN | M0)}, /* WLSDIO_DATA1*/ + {WLSDIO_DATA2, (PTU | IEN | M0)}, /* WLSDIO_DATA2*/ + {WLSDIO_DATA3, (PTU | IEN | M0)}, /* WLSDIO_DATA3*/ + {UART5_RX, (PTU | IEN | M0)}, /* UART5_RX */ + {UART5_TX, (M0)}, /* UART5_TX */ + {UART5_CTS, (PTU | IEN | M0)}, /* UART5_CTS */ + {UART5_RTS, (M0)}, /* UART5_RTS */ + {I2C2_SCL, (IEN | M0)}, /* I2C2_SCL */ + {I2C2_SDA, (IEN | M0)}, /* I2C2_SDA */ + {MCSPI1_CLK, (M6)}, /* GPIO5_140 */ + {MCSPI1_SOMI, (IEN | M6)}, /* GPIO5_141 */ + {MCSPI1_SIMO, (PTD | M6)}, /* GPIO5_142 */ + {MCSPI1_CS0, (PTD | M6)}, /* GPIO5_143 */ + {MCSPI1_CS1, (PTD | IEN | M6)}, /* GPIO5_144 */ + {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */ + {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */ + {PERSLIMBUS2_CLOCK, (PTD | M6)}, /* GPIO5_145 */ + {PERSLIMBUS2_DATA, (PTD | IEN | M6)}, /* GPIO5_146 */ + {UART6_TX, (PTU | IEN | M6)}, /* GPIO5_149 */ + {UART6_RX, (PTU | IEN | M6)}, /* GPIO5_150 */ + {UART6_CTS, (PTU | IEN | M6)}, /* GPIO5_151 */ + {UART6_RTS, (PTU | M0)}, /* UART6_RTS */ + {UART3_CTS_RCTX, (PTU | IEN | M6)}, /* GPIO5_153 */ + {UART3_RTS_IRSD, (PTU | IEN | M1)}, /* HDQ_SIO */ + {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */ + {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */ + +}; + +const struct pad_conf_entry wkup_padconf_array_non_essential[] = { + +/* + * This pad keeps C2C Module always enabled. + * Putting this in safe mode do not cause the issue. + * C2C driver could enable this mux setting if needed. + */ + {LLIA_WAKEREQIN, (M7)}, /* SAFE MODE */ + {LLIB_WAKEREQIN, (M7)}, /* SAFE MODE */ + {DRM_EMU0, (PTU | IEN | M0)}, /* DRM_EMU0 */ + {DRM_EMU1, (PTU | IEN | M0)}, /* DRM_EMU1 */ + {JTAG_NTRST, (IEN | M0)}, /* JTAG_NTRST */ + {JTAG_TCK, (IEN | M0)}, /* JTAG_TCK */ + {JTAG_RTCK, (M0)}, /* JTAG_RTCK */ + {JTAG_TMSC, (IEN | M0)}, /* JTAG_TMSC */ + {JTAG_TDI, (IEN | M0)}, /* JTAG_TDI */ + {JTAG_TDO, (M0)}, /* JTAG_TDO */ + {FREF_CLK_IOREQ, (IEN | M0)}, /* FREF_CLK_IOREQ */ + {FREF_CLK0_OUT, (M0)}, /* FREF_CLK0_OUT */ + {FREF_CLK1_OUT, (M0)}, /* FREF_CLK1_OUT */ + {FREF_CLK2_OUT, (M0)}, /* FREF_CLK2_OUT */ + {FREF_CLK2_REQ, (PTU | IEN | M6)}, /* GPIO1_WK9 */ + {FREF_CLK1_REQ, (PTD | IEN | M6)}, /* GPIO1_WK8 */ + {SYS_NRESPWRON, (IEN | M0)}, /* SYS_NRESPWRON */ + {SYS_NRESWARM, (PTU | IEN | M0)}, /* SYS_NRESWARM */ + {SYS_PWR_REQ, (M0)}, /* SYS_PWR_REQ */ + {SYS_NIRQ1, (PTU | IEN | M0)}, /* SYS_NIRQ1 */ + {SYS_NIRQ2, (PTU | IEN | M0)}, /* SYS_NIRQ2 */ + {SYS_BOOT0, (IEN | M0)}, /* SYS_BOOT0 */ + {SYS_BOOT1, (IEN | M0)}, /* SYS_BOOT1 */ + {SYS_BOOT2, (IEN | M0)}, /* SYS_BOOT2 */ + {SYS_BOOT3, (IEN | M0)}, /* SYS_BOOT3 */ + {SYS_BOOT4, (IEN | M0)}, /* SYS_BOOT4 */ + {SYS_BOOT5, (IEN | M0)}, /* SYS_BOOT5 */ + +}; + +#endif /* _EVM4430_MUX_DATA_H */ diff --git a/boards.cfg b/boards.cfg index ee68fdd..c9ad3ff 100644 --- a/boards.cfg +++ b/boards.cfg @@ -291,7 +291,7 @@ twister arm armv7 twister technex nokia_rx51 arm armv7 rx51 nokia omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 -omap5_evm arm armv7 omap5_evm ti omap5 +omap5_uevm arm armv7 omap5_uevm ti omap5 dra7xx_evm arm armv7 dra7xx ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h deleted file mode 100644 index 22a8e13..0000000 --- a/include/configs/omap5_evm.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2013 - * Texas Instruments Incorporated. - * Sricharan R r.sricharan@ti.com - * - * Configuration settings for the TI EVM5430 board. - * See omap5_common.h for omap5 common settings. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_OMAP5_EVM_H -#define __CONFIG_OMAP5_EVM_H - -#include <configs/omap5_common.h> - -/* TWL6035 */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_TWL6035_POWER -#endif - -#define CONFIG_SYS_PROMPT "OMAP5430 EVM # " - -#endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h new file mode 100644 index 0000000..22a8e13 --- /dev/null +++ b/include/configs/omap5_uevm.h @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Sricharan R r.sricharan@ti.com + * + * Configuration settings for the TI EVM5430 board. + * See omap5_common.h for omap5 common settings. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_OMAP5_EVM_H +#define __CONFIG_OMAP5_EVM_H + +#include <configs/omap5_common.h> + +/* TWL6035 */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_TWL6035_POWER +#endif + +#define CONFIG_SYS_PROMPT "OMAP5430 EVM # " + +#endif /* __CONFIG_OMAP5_EVM_H */
On Saturday 23 March 2013 01:54 PM, Sricharan R wrote:
The omap5-uevm is the reference board name for OMAP5 soc based platform. So rename it accordingly.
Signed-off-by: Sricharan R r.sricharan@ti.com
board/ti/omap5_evm/Makefile | 49 ------- board/ti/omap5_evm/evm.c | 101 ------------- board/ti/omap5_evm/mux_data.h | 304 ---------------------------------------- board/ti/omap5_uevm/Makefile | 49 +++++++ board/ti/omap5_uevm/evm.c | 101 +++++++++++++ board/ti/omap5_uevm/mux_data.h | 304 ++++++++++++++++++++++++++++++++++++++++ boards.cfg | 2 +- include/configs/omap5_evm.h | 40 ------ include/configs/omap5_uevm.h | 40 ++++++ 9 files changed, 495 insertions(+), 495 deletions(-) delete mode 100644 board/ti/omap5_evm/Makefile delete mode 100644 board/ti/omap5_evm/evm.c delete mode 100644 board/ti/omap5_evm/mux_data.h create mode 100644 board/ti/omap5_uevm/Makefile create mode 100644 board/ti/omap5_uevm/evm.c create mode 100644 board/ti/omap5_uevm/mux_data.h delete mode 100644 include/configs/omap5_evm.h create mode 100644 include/configs/omap5_uevm.h
Sorry, missed detecting renames while git format-patch. Will post V2 for that.
Regards, Sricharan
While booting with dt blob, if fdt_high is not set to 0xffffffff, the dt blob gets relocated to a high ram address, which the kernel is not able to use without HIGHMEM.
So set it to 0xffffffff to avoid the issue.
Signed-off-by: Sricharan R r.sricharan@ti.com --- include/configs/omap5_common.h | 1 + 1 file changed, 1 insertion(+)
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index af97564..f0416df 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -143,6 +143,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ + "fdt_high=0xffffffff\0" \ "usbtty=cdc_acm\0" \ "vram=16M\0" \ "mmcdev=0\0" \
The boot.scr has to be built and copied, where as allowing to import the environment from a text file is much more friendly.
Thanks to the below patch, which has much more informative change log.
commit: d70f54808dfa83b574e1239c3eccbcf3317343e1 (omap4: allow the use of a plain text env file instead boot scripts)
Signed-off-by: Sricharan R r.sricharan@ti.com --- include/configs/omap5_common.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index f0416df..6d7aa7b 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -156,6 +156,9 @@ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ "run mmcargs; " \ @@ -166,9 +169,16 @@ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi; " \ + "if run loadbootenv; then " \ + "run importbootenv; " \ + "fi;" \ + "if test -n ${uenvcmd}; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot; " \ "fi; " \ "fi"
Now with kernel moving to all device tree, the default boot command is changed to pass the device tree blob. Also, adding the findfdt command to get the dt-blob based on the board.
Thanks to Tom Rini trini@ti.com for suggesting this.
Signed-off-by: Sricharan R r.sricharan@ti.com --- include/configs/omap4_common.h | 13 +++++++++++-- include/configs/omap5_common.h | 11 +++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 6ae6a0f..e812e52 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -138,6 +138,7 @@ */
#define CONFIG_BOOTDELAY 3 +#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_OVERWRITE
@@ -145,6 +146,7 @@ "loadaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ "fdt_high=0xffffffff\0" \ + "fdtaddr=0x88000000\0" \ "usbtty=cdc_acm\0" \ "vram=16M\0" \ "mmcdev=0\0" \ @@ -153,7 +155,9 @@ "mmcargs=setenv bootargs console=${console} " \ "vram=${vram} " \ "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "rootfstype=${mmcrootfstype}; " \ + "run findfdt; " \ + "fatload mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ @@ -163,7 +167,12 @@ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ "run mmcargs; " \ - "bootm ${loadaddr}\0" \ + "bootm ${loadaddr} - ${fdtaddr}\0" \ + "findfdt="\ + "if test $board_name = omap4_sdp4430; then " \ + "setenv fdtfile omap4-sdp.dtb; fi; " \ + "if test $board_name = omap4_panda; then " \ + "setenv fdtfile omap4-panda.dtb; fi\0" \
#define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index 6d7aa7b..1576fa0 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -137,6 +137,7 @@ */
#define CONFIG_BOOTDELAY 3 +#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_OVERWRITE
@@ -144,6 +145,7 @@ "loadaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ "fdt_high=0xffffffff\0" \ + "fdtaddr=0x88000000\0" \ "usbtty=cdc_acm\0" \ "vram=16M\0" \ "mmcdev=0\0" \ @@ -152,7 +154,9 @@ "mmcargs=setenv bootargs console=${console} " \ "vram=${vram} " \ "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "rootfstype=${mmcrootfstype}; " \ + "run findfdt; " \ + "fatload mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ @@ -162,7 +166,10 @@ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ "run mmcargs; " \ - "bootm ${loadaddr}\0" \ + "bootm ${loadaddr} - ${fdtaddr}\0" \ + "findfdt="\ + "if test $board_name = omap5_uevm; then " \ + "setenv fdtfile omap5-uevm.dtb; fi;\0 " \
#define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \
So with OMAP added to multi platform kernel, the uImage no more contains a valid load address. With the uboot already supporting zImage, change the default boot command to bootz instead.
Signed-off-by: Sricharan R r.sricharan@ti.com --- include/configs/omap4_common.h | 6 +++--- include/configs/omap5_common.h | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index e812e52..14833fa 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -164,10 +164,10 @@ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "loadzimage=fatload mmc ${mmcdev} ${loadaddr} zImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ "run mmcargs; " \ - "bootm ${loadaddr} - ${fdtaddr}\0" \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ "findfdt="\ "if test $board_name = omap4_sdp4430; then " \ "setenv fdtfile omap4-sdp.dtb; fi; " \ @@ -188,7 +188,7 @@ "run uenvcmd;" \ "fi;" \ "fi;" \ - "if run loaduimage; then " \ + "if run loadzimage; then " \ "run mmcboot; " \ "fi; " \ "fi" diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index 1576fa0..0df2600 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -163,10 +163,10 @@ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "loadzimage=fatload mmc ${mmcdev} ${loadaddr} zImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ "run mmcargs; " \ - "bootm ${loadaddr} - ${fdtaddr}\0" \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ "findfdt="\ "if test $board_name = omap5_uevm; then " \ "setenv fdtfile omap5-uevm.dtb; fi;\0 " \ @@ -184,7 +184,7 @@ "run uenvcmd;" \ "fi;" \ "fi;" \ - "if run loaduimage; then " \ + "if run loadzimage; then " \ "run mmcboot; " \ "fi; " \ "fi"
On 13:54-20130323, Sricharan R wrote:
With the kernel moving all towards device tree, this series adds support to make the device tree boot as the default for OMAP4/5 platforms.
Sricharan R (5): ARM: OMAP5: Rename omap5_evm.h to omap5_uevm.h ARM: OMAP5: Set fdt_high to enable booting with Device tree ARM: OMAP5: Support loading environment variables from txt file ARM: OMAP4/5: Change the default boot command to work with device tree ARM: OMAP4/5: Make bootz as the default boot command
board/ti/omap5_evm/Makefile | 49 ------- board/ti/omap5_evm/evm.c | 101 ------------- board/ti/omap5_evm/mux_data.h | 304 ---------------------------------------- board/ti/omap5_uevm/Makefile | 49 +++++++ board/ti/omap5_uevm/evm.c | 101 +++++++++++++ board/ti/omap5_uevm/mux_data.h | 304 ++++++++++++++++++++++++++++++++++++++++ boards.cfg | 2 +- include/configs/omap4_common.h | 16 ++- include/configs/omap5_common.h | 30 +++- include/configs/omap5_evm.h | 40 ------ include/configs/omap5_uevm.h | 40 ++++++ 11 files changed, 531 insertions(+), 505 deletions(-) delete mode 100644 board/ti/omap5_evm/Makefile delete mode 100644 board/ti/omap5_evm/evm.c delete mode 100644 board/ti/omap5_evm/mux_data.h create mode 100644 board/ti/omap5_uevm/Makefile create mode 100644 board/ti/omap5_uevm/evm.c create mode 100644 board/ti/omap5_uevm/mux_data.h delete mode 100644 include/configs/omap5_evm.h create mode 100644 include/configs/omap5_uevm.h
Series: Tested-by: Nishanth Menon nm@ti.com {assuming change stated in http://patchwork.ozlabs.org/patch/230283/ Acked-by: Nishanth Menon nm@ti.com
On Monday 25 March 2013 09:31 PM, Nishanth Menon wrote:
On 13:54-20130323, Sricharan R wrote:
With the kernel moving all towards device tree, this series adds support to make the device tree boot as the default for OMAP4/5 platforms.
Sricharan R (5): ARM: OMAP5: Rename omap5_evm.h to omap5_uevm.h ARM: OMAP5: Set fdt_high to enable booting with Device tree ARM: OMAP5: Support loading environment variables from txt file ARM: OMAP4/5: Change the default boot command to work with device tree ARM: OMAP4/5: Make bootz as the default boot command
board/ti/omap5_evm/Makefile | 49 ------- board/ti/omap5_evm/evm.c | 101 ------------- board/ti/omap5_evm/mux_data.h | 304 ---------------------------------------- board/ti/omap5_uevm/Makefile | 49 +++++++ board/ti/omap5_uevm/evm.c | 101 +++++++++++++ board/ti/omap5_uevm/mux_data.h | 304 ++++++++++++++++++++++++++++++++++++++++ boards.cfg | 2 +- include/configs/omap4_common.h | 16 ++- include/configs/omap5_common.h | 30 +++- include/configs/omap5_evm.h | 40 ------ include/configs/omap5_uevm.h | 40 ++++++ 11 files changed, 531 insertions(+), 505 deletions(-) delete mode 100644 board/ti/omap5_evm/Makefile delete mode 100644 board/ti/omap5_evm/evm.c delete mode 100644 board/ti/omap5_evm/mux_data.h create mode 100644 board/ti/omap5_uevm/Makefile create mode 100644 board/ti/omap5_uevm/evm.c create mode 100644 board/ti/omap5_uevm/mux_data.h delete mode 100644 include/configs/omap5_evm.h create mode 100644 include/configs/omap5_uevm.h
Series: Tested-by: Nishanth Menon nm@ti.com {assuming change stated in http://patchwork.ozlabs.org/patch/230283/ Acked-by: Nishanth Menon nm@ti.com
Thanks Nishanth. Posting V3 to include your patch.
Regards, Sricharan
participants (2)
-
Nishanth Menon -
Sricharan R