[U-Boot-Users] u-boot debug and flash
I'm a newbie to u-boot, I'm working on Adder87x board and have a P&E BDM cable to parelle port, Anybody can tell me how can I write u-boot to the target board via BDM interface and how can I debug? Thank you very much!
Regards, Jia Jianwei
In message 01e101c48afb$916b9df0$3a4610ac@fortinet.com you wrote:
I'm a newbie to u-boot, I'm working on Adder87x board and have a P&E BDM cable to parelle port, Anybody can tell me how can I write u-boot to the target board via BDM interface and how can I debug? Thank you very much!
Maybe you should ask P&E support, if you bought their products. This is actually off topic here.
Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
And NEVER post HTML to this list, please!!!
Wolfgang Denk
participants (2)
-
Jia Jianwei -
Wolfgang Denk