Hey Vishal!

On October 20, 2023 thus sayeth Vishal Mahaveer:

PLL calibration needs to be enabled when operating in non fractional mode. Add the sequence to do a fast calibration when using PLL in this mode.

Signed-off-by: Vishal Mahaveer vishalm@ti.com

Reviewed-by: Bryan Brattlof bb@ti.com

---

drivers/clk/ti/clk-k3-pll.c | 81 ++++++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 6 deletions(-)

Thanks for fixing this! I've tested the am62x and the j721e and this appears to be working \o/

~Bryan