Add some abstraction to NFC definitions so that some parts of the current code can also be used for future i.MX5 code.

Clean up a few things by the way.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Acked-by: Scott Wood scottwood@freescale.com Tested-by: Fabio Estevam fabio.estevam@freescale.com --- Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: - Fix typo in patch description.

Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: - Separate code reformatting from behavioral changes.

Changes in v2: - Fix warning for unused tmp variable in board_nand_init() for NFC V1.

drivers/mtd/nand/mxc_nand.c | 92 +++++++++++++++++++++--------------------- include/fsl_nfc.h | 72 ++++++++++++--------------------- nand_spl/nand_boot_fsl_nfc.c | 47 +++++++++++---------- 3 files changed, 97 insertions(+), 114 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index bb475f2..6ae95d6 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -119,7 +119,7 @@ static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size

/* * This function polls the NANDFC to wait for the basic operation to - * complete by checking the INT bit of config2 register. + * complete by checking the INT bit. */ static void wait_op_done(struct mxc_nand_host *host, int max_retries, uint16_t param) @@ -127,10 +127,10 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries, uint32_t tmp;

while (max_retries-- > 0) { - if (readw(&host->regs->config2) & NFC_INT) { - tmp = readw(&host->regs->config2); - tmp &= ~NFC_INT; - writew(tmp, &host->regs->config2); + tmp = readnfc(&host->regs->config2); + if (tmp & NFC_V1_V2_CONFIG2_INT) { + tmp &= ~NFC_V1_V2_CONFIG2_INT; + writenfc(tmp, &host->regs->config2); break; } udelay(1); @@ -149,8 +149,8 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);

- writew(cmd, &host->regs->flash_cmd); - writew(NFC_CMD, &host->regs->config2); + writenfc(cmd, &host->regs->flash_cmd); + writenfc(NFC_CMD, &host->regs->operation);

/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, cmd); @@ -165,8 +165,8 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);

- writew(addr, &host->regs->flash_addr); - writew(NFC_ADDR, &host->regs->config2); + writenfc(addr, &host->regs->flash_addr); + writenfc(NFC_ADDR, &host->regs->operation);

/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, addr); @@ -198,19 +198,19 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, } }

- writew(buf_id, &host->regs->buf_addr); + writenfc(buf_id, &host->regs->buf_addr);

/* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint16_t config1 = readw(&host->regs->config1); + uint16_t config1 = readnfc(&host->regs->config1); if (spare_only) - config1 |= NFC_SP_EN; + config1 |= NFC_CONFIG1_SP_EN; else - config1 &= ~NFC_SP_EN; - writew(config1, &host->regs->config1); + config1 &= ~NFC_CONFIG1_SP_EN; + writenfc(config1, &host->regs->config1); }

- writew(NFC_INPUT, &host->regs->config2); + writenfc(NFC_INPUT, &host->regs->operation);

/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); @@ -225,19 +225,19 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);

- writew(buf_id, &host->regs->buf_addr); + writenfc(buf_id, &host->regs->buf_addr);

/* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint32_t config1 = readw(&host->regs->config1); + uint32_t config1 = readnfc(&host->regs->config1); if (spare_only) - config1 |= NFC_SP_EN; + config1 |= NFC_CONFIG1_SP_EN; else - config1 &= ~NFC_SP_EN; - writew(config1, &host->regs->config1); + config1 &= ~NFC_CONFIG1_SP_EN; + writenfc(config1, &host->regs->config1); }

- writew(NFC_OUTPUT, &host->regs->config2); + writenfc(NFC_OUTPUT, &host->regs->operation);

/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); @@ -265,14 +265,14 @@ static void send_read_id(struct mxc_nand_host *host) uint16_t tmp;

/* NANDFC buffer 0 is used for device ID output */ - writew(0x0, &host->regs->buf_addr); + writenfc(0x0, &host->regs->buf_addr);

/* Read ID into main buffer */ - tmp = readw(&host->regs->config1); - tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_CONFIG1_SP_EN; + writenfc(tmp, &host->regs->config1);

- writew(NFC_ID, &host->regs->config2); + writenfc(NFC_ID, &host->regs->operation);

/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); @@ -292,14 +292,14 @@ static uint16_t get_dev_status(struct mxc_nand_host *host) /* store the main area1 first word, later do recovery */ store = readl(main_buf); /* NANDFC buffer 1 is used for device status */ - writew(1, &host->regs->buf_addr); + writenfc(1, &host->regs->buf_addr);

/* Read status into main buffer */ - tmp = readw(&host->regs->config1); - tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp &= ~NFC_CONFIG1_SP_EN; + writenfc(tmp, &host->regs->config1);

- writew(NFC_STATUS, &host->regs->config2); + writenfc(NFC_STATUS, &host->regs->operation);

/* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); @@ -328,13 +328,13 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint16_t tmp = readw(&host->regs->config1); + uint16_t tmp = readnfc(&host->regs->config1);

if (on) - tmp |= NFC_ECC_EN; + tmp |= NFC_V1_V2_CONFIG1_ECC_EN; else - tmp &= ~NFC_ECC_EN; - writew(tmp, &host->regs->config1); + tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN; + writenfc(tmp, &host->regs->config1); }

#ifdef CONFIG_MXC_NAND_HWECC @@ -667,7 +667,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, * additional correction. 2-Bit errors cannot be corrected by * HW ECC, so we need to return failure */ - uint16_t ecc_status = readw(&host->regs->ecc_status_result); + uint16_t ecc_status = readnfc(&host->regs->ecc_status_result);

if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { MTDDEBUG(MTD_DEBUG_LEVEL0, @@ -1210,24 +1210,24 @@ int board_nand_init(struct nand_chip *this) #endif

#ifdef MXC_NFC_V2_1 - tmp = readw(&host->regs->config1); - tmp |= NFC_ONE_CYCLE; - tmp |= NFC_4_8N_ECC; - writew(tmp, &host->regs->config1); + tmp = readnfc(&host->regs->config1); + tmp |= NFC_V2_CONFIG1_ONE_CYCLE; + tmp |= NFC_V2_CONFIG1_ECC_MODE_4; + writenfc(tmp, &host->regs->config1); if (host->pagesize_2k) - writew(64/2, &host->regs->spare_area_size); + writenfc(64/2, &host->regs->spare_area_size); else - writew(16/2, &host->regs->spare_area_size); + writenfc(16/2, &host->regs->spare_area_size); #endif

/* * preset operation * Unlock the internal RAM Buffer */ - writew(0x2, &host->regs->config); + writenfc(0x2, &host->regs->config);

/* Blocks to be unlocked */ - writew(0x0, &host->regs->unlockstart_blkaddr); + writenfc(0x0, &host->regs->unlockstart_blkaddr); /* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the * unlockend_blkaddr, but the magic 0x4000 does not always work * when writing more than some 32 megabytes (on 2k page nands) @@ -1239,10 +1239,10 @@ int board_nand_init(struct nand_chip *this) * This might be NAND chip specific and the i.MX31 datasheet is * extremely vague about the semantics of this register. */ - writew(0xFFFF, &host->regs->unlockend_blkaddr); + writenfc(0xFFFF, &host->regs->unlockend_blkaddr);

/* Unlock Block Command for given address range */ - writew(0x4, &host->regs->wrprot); + writenfc(0x4, &host->regs->wrprot);

return 0; } diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h index ff537b4..013e9e2 100644 --- a/include/fsl_nfc.h +++ b/include/fsl_nfc.h @@ -113,58 +113,38 @@ struct fsl_nfc_regs { #endif };

-/* - * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command - * operation - */ -#define NFC_CMD 0x1 +/* Set FCMD to 1, rest to 0 for Command operation */ +#define NFC_CMD 0x1

-/* - * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address - * operation - */ -#define NFC_ADDR 0x2 +/* Set FADD to 1, rest to 0 for Address operation */ +#define NFC_ADDR 0x2

-/* - * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input - * operation - */ -#define NFC_INPUT 0x4 +/* Set FDI to 1, rest to 0 for Input operation */ +#define NFC_INPUT 0x4

-/* - * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data - * Output operation - */ -#define NFC_OUTPUT 0x8 +/* Set FDO to 001, rest to 0 for Data Output operation */ +#define NFC_OUTPUT 0x8

-/* - * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID - * operation - */ -#define NFC_ID 0x10 +/* Set FDO to 010, rest to 0 for Read ID operation */ +#define NFC_ID 0x10

-/* - * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read - * Status operation - */ -#define NFC_STATUS 0x20 +/* Set FDO to 100, rest to 0 for Read Status operation */ +#define NFC_STATUS 0x20

-/* - * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status - * operation - */ -#define NFC_INT 0x8000 +#define NFC_CONFIG1_SP_EN (1 << 2) +#define NFC_CONFIG1_RST (1 << 6) +#define NFC_CONFIG1_CE (1 << 7) +#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3) +#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4) +#define NFC_V1_V2_CONFIG1_BIG (1 << 5) +#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0) +#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8) +#define NFC_V2_CONFIG1_FP_INT (1 << 11)

-#ifdef MXC_NFC_V2_1 -#define NFC_4_8N_ECC (1 << 0) -#endif -#define NFC_SP_EN (1 << 2) -#define NFC_ECC_EN (1 << 3) -#define NFC_INT_MSK (1 << 4) -#define NFC_BIG (1 << 5) -#define NFC_RST (1 << 6) -#define NFC_CE (1 << 7) -#define NFC_ONE_CYCLE (1 << 8) -#define NFC_FP_INT (1 << 11) +#define NFC_V1_V2_CONFIG2_INT (1 << 15) + +#define operation config2 +#define readnfc readw +#define writenfc writew

#endif /* __FSL_NFC_H */ diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c index a40c998..615e820 100644 --- a/nand_spl/nand_boot_fsl_nfc.c +++ b/nand_spl/nand_boot_fsl_nfc.c @@ -36,13 +36,13 @@ static void nfc_wait_ready(void) { uint32_t tmp;

- while (!(readw(&nfc->config2) & NFC_INT)) + while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT)) ;

/* Reset interrupt flag */ - tmp = readw(&nfc->config2); - tmp &= ~NFC_INT; - writew(tmp, &nfc->config2); + tmp = readnfc(&nfc->config2); + tmp &= ~NFC_V1_V2_CONFIG2_INT; + writenfc(tmp, &nfc->config2); }

static void nfc_nand_init(void) @@ -51,43 +51,45 @@ static void nfc_nand_init(void) int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512; int config1;

- writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size); + writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);

/* unlocking RAM Buff */ - writew(0x2, &nfc->config); + writenfc(0x2, &nfc->config);

/* hardware ECC checking and correct */ - config1 = readw(&nfc->config1) | NFC_ECC_EN | NFC_INT_MSK | - NFC_ONE_CYCLE | NFC_FP_INT; + config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN | + NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE | + NFC_V2_CONFIG1_FP_INT; /* * if spare size is larger that 16 bytes per 512 byte hunk * then use 8 symbol correction instead of 4 */ if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16) - config1 &= ~NFC_4_8N_ECC; + config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4; else - config1 |= NFC_4_8N_ECC; - writew(config1, &nfc->config1); + config1 |= NFC_V2_CONFIG1_ECC_MODE_4; + writenfc(config1, &nfc->config1); #elif defined(MXC_NFC_V1) /* unlocking RAM Buff */ - writew(0x2, &nfc->config); + writenfc(0x2, &nfc->config);

/* hardware ECC checking and correct */ - writew(NFC_ECC_EN | NFC_INT_MSK, &nfc->config1); + writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK, + &nfc->config1); #endif }

static void nfc_nand_command(unsigned short command) { - writew(command, &nfc->flash_cmd); - writew(NFC_CMD, &nfc->config2); + writenfc(command, &nfc->flash_cmd); + writenfc(NFC_CMD, &nfc->operation); nfc_wait_ready(); }

static void nfc_nand_address(unsigned short address) { - writew(address, &nfc->flash_addr); - writew(NFC_ADDR, &nfc->config2); + writenfc(address, &nfc->flash_addr); + writenfc(NFC_ADDR, &nfc->operation); nfc_wait_ready(); }

@@ -121,8 +123,8 @@ static void nfc_nand_data_output(void) int i; #endif

- writew(0, &nfc->buf_addr); - writew(NFC_OUTPUT, &nfc->config2); + writenfc(0, &nfc->buf_addr); + writenfc(NFC_OUTPUT, &nfc->operation); nfc_wait_ready(); #ifdef NAND_MXC_2K_MULTI_CYCLE /* @@ -130,8 +132,8 @@ static void nfc_nand_data_output(void) * for pages larger than 512 bytes. */ for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) { - writew(i, &nfc->buf_addr); - writew(NFC_OUTPUT, &nfc->config2); + writenfc(i, &nfc->buf_addr); + writenfc(NFC_OUTPUT, &nfc->operation); nfc_wait_ready(); } #endif @@ -160,7 +162,8 @@ static int nfc_nand_check_ecc(void)

static void nfc_nand_read_page(unsigned int page_address) { - writew(0, &nfc->buf_addr); /* read in first 0 buffer */ + /* read in first 0 buffer */ + writenfc(0, &nfc->buf_addr); nfc_nand_command(NAND_CMD_READ0); nfc_nand_page_address(page_address);

Don't use several instructions to build constant values.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Acked-by: Stefano Babic sbabic@denx.de --- Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: - New patch.

Changes in v2: None

arch/arm/cpu/armv7/mx5/lowlevel_init.S | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 6d9396a..dfce0ca 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -309,8 +309,7 @@ setup_pll_func: ldr r0, =CCM_BASE_ADDR ldr r1, =0x00015154 str r1, [r0, #CLKCTL_CBCMR] - ldr r1, =0x02888945 - orr r1, r1, #(1 << 16) + ldr r1, =0x02898945 str r1, [r0, #CLKCTL_CBCDR] /* make sure change is effective */ 1: ldr r1, [r0, #CLKCTL_CDHIPR] @@ -321,10 +320,7 @@ setup_pll_func:

/* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR - ldr r1, =0x00808145 - orr r1, r1, #(2 << 10) - orr r1, r1, #(0 << 16) - orr r1, r1, #(1 << 19) + ldr r1, =0x00888945 str r1, [r0, #CLKCTL_CBCDR]

ldr r1, =0x00016154

The page number indicated in the debug trace of mxc_nand_read_oob_syndrome() did not match the page being worked on.

By the way, replace the GCC-specific __FUNCTION__ with __func__.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Acked-by: Scott Wood scottwood@freescale.com --- Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: - Replace __FUNCTION__ with __func__.

Changes in v4: - New patch.

Changes in v3: None Changes in v2: None

drivers/mtd/nand/mxc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index db72cdc..62d6965 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -409,7 +409,7 @@ static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,

MTDDEBUG(MTD_DEBUG_LEVEL0, "%s: Reading OOB area of page %u to oob %p\n", - __FUNCTION__, host->page_addr, buf); + __func__, page, buf);

chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page); for (i = 0; i < chip->ecc.steps; i++) {

_TEXT_BASE must be set to CONFIG_SPL_TEXT_BASE for generic SPL, and to CONFIG_SYS_TEXT_BASE for non-SPL builds.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Reviewed-by: Tom Rini trini@ti.com --- Changes in v10: None Changes in v9: None Changes in v8: - Apply to mxs SPL too.

Changes in v7: None Changes in v6: - New patch.

Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

arch/arm/cpu/arm1136/start.S | 4 ++++ arch/arm/cpu/arm1176/start.S | 8 ++++++++ arch/arm/cpu/arm720t/start.S | 2 +- arch/arm/cpu/arm920t/start.S | 4 ++++ arch/arm/cpu/arm925t/start.S | 4 ++++ arch/arm/cpu/arm926ejs/mxs/start.S | 4 ++++ arch/arm/cpu/arm926ejs/start.S | 2 +- arch/arm/cpu/arm946es/start.S | 4 ++++ arch/arm/cpu/arm_intcm/start.S | 6 +++++- arch/arm/cpu/armv7/start.S | 4 ++++ arch/arm/cpu/ixp/start.S | 4 ++++ arch/arm/cpu/pxa/start.S | 2 +- arch/arm/cpu/s3c44b0/start.S | 4 ++++ arch/arm/cpu/sa1100/start.S | 4 ++++ 14 files changed, 52 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index eba2324..0cd2400 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -88,7 +88,11 @@ _end_vect:

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 3c291fb..accccdc 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -98,7 +98,15 @@ _end_vect:

.globl _TEXT_BASE _TEXT_BASE: +#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ .word CONFIG_SYS_TEXT_BASE +#else +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else + .word CONFIG_SYS_TEXT_BASE +#endif +#endif

/* * Below variable is very important because we use MMU in U-Boot. diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 43bd6ed..1e3e5a1 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -85,7 +85,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */

.globl _TEXT_BASE _TEXT_BASE: -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_SYS_TEXT_BASE diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 2864d12..8c2c836 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -73,7 +73,11 @@ _fiq: .word fiq

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 827fee2..7f067c0 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -79,7 +79,11 @@ _fiq: .word fiq

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 373e6d8..bf54423 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -119,7 +119,11 @@ fiq:

.globl _TEXT_BASE _TEXT_BASE: +#ifdef CONFIG_SPL_TEXT_BASE + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index f5d1582..efdff3e 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -123,7 +123,7 @@ _TEXT_BASE: #ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ .word CONFIG_SYS_TEXT_BASE #else -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_SYS_TEXT_BASE diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 9dec35b..85adc62 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -89,7 +89,11 @@ _vectors_end:

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 04d0845..a69fb17 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -85,7 +85,11 @@ _fiq:

.globl _TEXT_BASE _TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */ +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else + .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 36a4c3c..5e5f42e 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -81,7 +81,11 @@ _end_vect:

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index b725964..8f4fa7b 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -98,7 +98,11 @@ _fiq: .word fiq

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 456a783..2e2afd7 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -102,7 +102,7 @@ _end_vect:

.globl _TEXT_BASE _TEXT_BASE: -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_SYS_TEXT_BASE diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index c096177..aab81f5 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -64,7 +64,11 @@ _start: b reset

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script. diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 4bf6f5f..01d1a59 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -74,7 +74,11 @@ _fiq: .word fiq

.globl _TEXT_BASE _TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif

/* * These are defined in the board-specific linker script.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: - New patch, extracted from "nand: mxc: Switch NAND SPL to generic SPL".

Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

arch/arm/cpu/arm1136/start.S | 2 -- 1 file changed, 2 deletions(-)

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index eda4bc0..5225639 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -237,8 +237,6 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop - bx lr - #endif

relocate_done:

Use __image_copy_end instead of __bss_start for the end of the image to relocate. This is the same as commit 033ca72, but applied to all ARM start.S.

This is a more appropriate symbol naming for an image copy & relocate feature, and this also saves a useless copy of data put between __image_copy_end and __bss_start in linker scripts (e.g. relocation information, or MMU initialization tables used only before jumping to the relocated image).

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: - Rebase on current u-boot-arm/master.

Changes in v9: None Changes in v8: - Fix "space before tab" warning. - Give more details in patch description.

Changes in v7: None Changes in v6: - New patch.

Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

arch/arm/cpu/arm1136/start.S | 4 ++-- arch/arm/cpu/arm1176/start.S | 6 +++++- arch/arm/cpu/arm720t/start.S | 6 +++++- arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 3 +++ arch/arm/cpu/arm920t/start.S | 6 +++++- arch/arm/cpu/arm925t/start.S | 6 +++++- arch/arm/cpu/arm926ejs/start.S | 6 +++++- arch/arm/cpu/arm946es/start.S | 6 +++++- arch/arm/cpu/arm_intcm/start.S | 6 +++++- arch/arm/cpu/armv7/start.S | 4 ++-- arch/arm/cpu/ixp/start.S | 6 +++++- arch/arm/cpu/ixp/u-boot.lds | 2 ++ arch/arm/cpu/pxa/start.S | 6 +++++- arch/arm/cpu/s3c44b0/start.S | 6 +++++- arch/arm/cpu/sa1100/start.S | 6 +++++- board/actux1/u-boot.lds | 3 +++ board/actux2/u-boot.lds | 3 +++ board/actux3/u-boot.lds | 3 +++ board/davinci/da8xxevm/u-boot-spl-hawk.lds | 1 + board/dvlhost/u-boot.lds | 3 +++ board/samsung/smdk6400/u-boot-nand.lds | 4 ++++ board/vpac270/u-boot-spl.lds | 2 ++ nand_spl/board/karo/tx25/u-boot.lds | 2 ++ nand_spl/board/samsung/smdk6400/u-boot.lds | 2 ++ 24 files changed, 87 insertions(+), 15 deletions(-)

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 67fcc4f..e36d7d3 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -104,9 +104,9 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

-.global _image_copy_end_ofs +.globl _image_copy_end_ofs _image_copy_end_ofs: - .word __image_copy_end - _start + .word __image_copy_end - _start

.globl _bss_end_ofs _bss_end_ofs: diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 17b1277..0b570d5 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -127,6 +127,10 @@ _TEXT_PHY_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -251,7 +255,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 95f4447..a640eaa 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -101,6 +101,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -166,7 +170,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index e483820..d0b1ada 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -55,6 +55,9 @@ SECTIONS }

. = ALIGN(4); + + __image_copy_end = .; + __bss_start = .; .bss : { *(.bss) } __bss_end = .; diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index cd8c8db..940ce72 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -89,6 +89,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -205,7 +209,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 9358f3e..ed683b4 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -95,6 +95,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -195,7 +199,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 6949645..552279f 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -140,6 +140,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -212,7 +216,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 90c15f2..2dd1fa3 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -105,6 +105,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -170,7 +174,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index a6e08ab..cc054e8 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -101,6 +101,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -166,7 +170,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 222b505..d0b17c9 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -94,9 +94,9 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

-.global _image_copy_end_ofs +.globl _image_copy_end_ofs _image_copy_end_ofs: - .word __image_copy_end - _start + .word __image_copy_end - _start

.globl _bss_end_ofs _bss_end_ofs: diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 3a1253d..a305ff5 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -114,6 +114,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -268,7 +272,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 8345b55..388a67f 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -54,6 +54,8 @@ SECTIONS

. = ALIGN(4);

+ __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index d807241..cd88af8 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -118,6 +118,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -190,7 +194,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 8cd4a5b..579f6e2 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -80,6 +80,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -151,7 +155,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 508c21e..13cf132 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -90,6 +90,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start

+.globl _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -155,7 +159,7 @@ relocate_code: subs r9, r6, r0 /* r9 <- relocation offset */ beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */

copy_loop: diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index c76728a..52fc9fc 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -61,6 +61,9 @@ SECTIONS }

. = ALIGN (4); + + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index 984f70e..cafd3d8 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -61,6 +61,9 @@ SECTIONS }

. = ALIGN (4); + + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index fc48cf0..168fe17 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -61,6 +61,9 @@ SECTIONS }

. = ALIGN (4); + + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index 2557830..4839364 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -58,6 +58,7 @@ SECTIONS }

. = ALIGN(4); + __image_copy_end = .; __rel_dyn_start = .; __rel_dyn_end = .; __dynsym_start = .; diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index b13d3e1..dd50bdb 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -61,6 +61,9 @@ SECTIONS }

. = ALIGN (4); + + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds index 64c650d..7c74267 100644 --- a/board/samsung/smdk6400/u-boot-nand.lds +++ b/board/samsung/smdk6400/u-boot-nand.lds @@ -53,6 +53,10 @@ SECTIONS KEEP(*(SORT(.u_boot_list*))); }

+ . = ALIGN(4); + + __image_copy_end = .; + . = align(4); .mmudata : { *(.mmudata) }

diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index dc437d1..ab65407 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -59,6 +59,8 @@ SECTIONS

. = ALIGN(4);

+ __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds index 4d1aac3..e5363e2 100644 --- a/nand_spl/board/karo/tx25/u-boot.lds +++ b/nand_spl/board/karo/tx25/u-boot.lds @@ -54,6 +54,8 @@ SECTIONS

. = ALIGN(4);

+ __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds index b6c573b..78907fd 100644 --- a/nand_spl/board/samsung/smdk6400/u-boot.lds +++ b/nand_spl/board/samsung/smdk6400/u-boot.lds @@ -58,6 +58,8 @@ SECTIONS

. = ALIGN(4);

+ __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*)

Give more flexibility to define configs that can be interpreted by make, e.g. to define fallback values of configs like in the example below.

Before this change, the config lines: #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE would have been changed in autoconfig.mk into: CONFIG_SPL_MAX_SIZE=2048 CONFIG_SPL_PAD_TO="CONFIG_SPL_MAX_SIZE"

Hence, a make recipe using as an argument to $(OBJCOPY): --pad-to=$(CONFIG_SPL_PAD_TO) would have issued: --pad-to="CONFIG_SPL_MAX_SIZE" which means nothing for $(OBJCOPY) and makes it fail.

Thanks to this change, the config lines above are changed in autoconfig.mk into: CONFIG_SPL_MAX_SIZE=2048 CONFIG_SPL_PAD_TO=$(CONFIG_SPL_MAX_SIZE)

Hence, the make recipe above now issues: --pad-to=2048 as expected from the defined config.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Reviewed-by: Tom Rini trini@ti.com --- Changes in v10: None Changes in v9: - Add detailed patch description.

Changes in v8: - New patch.

Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

tools/scripts/define2mk.sed | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/tools/scripts/define2mk.sed b/tools/scripts/define2mk.sed index 13e2845..c641edf 100644 --- a/tools/scripts/define2mk.sed +++ b/tools/scripts/define2mk.sed @@ -24,6 +24,8 @@ s/="([0-9][0-9]*)"/=\1/; # ... and from hex numbers s/="(0[Xx][0-9a-fA-F][0-9a-fA-F]*)"/=\1/; + # ... and from configs defined from other configs + s/="(CONFIG_[A-Za-z0-9_][A-Za-z0-9_]*)"/=$(\1)/; # Change '1' and empty values to "y" (not perfect, but # supports conditional compilation in the makefiles s/=$/=y/;

Automatically build the 'u-boot.imx' (i.e. imx header + u-boot.bin) and 'SPL' (i.e. imx header + u-boot-spl.bin) make targets for all imx processors supporting this header, so for arm926ejs, arm1136 and armv7. Some combinations were missing.

At the same time, fix the build of SPL targets not supporting the imx header on arm1136. For arm1136, the 'SPL' make target was forced to build in all cases if CONFIG_SPL_BUILD was defined, even for non-imx platforms or imx setups without an imx header.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: - New patch, extracted from "nand: mxc: Switch NAND SPL to generic SPL".

Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

arch/arm/cpu/arm1136/config.mk | 7 +++++++ arch/arm/cpu/arm926ejs/config.mk | 8 ++++++-- arch/arm/cpu/armv7/config.mk | 6 ++++++ 3 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk index 9092d91..797d122 100644 --- a/arch/arm/cpu/arm1136/config.mk +++ b/arch/arm/cpu/arm1136/config.mk @@ -31,6 +31,13 @@ PLATFORM_CPPFLAGS += -march=armv5 # ========================================================================= PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) + +ifneq ($(CONFIG_IMX_CONFIG),) +ifdef CONFIG_SPL ifdef CONFIG_SPL_BUILD ALL-y += $(OBJTREE)/SPL endif +else +ALL-y += $(obj)u-boot.imx +endif +endif diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 6a3a1bb..f0e31d1 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -33,7 +33,11 @@ PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-mali PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)

ifneq ($(CONFIG_IMX_CONFIG),) - +ifdef CONFIG_SPL +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/SPL +endif +else ALL-y += $(obj)u-boot.imx - +endif endif diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 9c3e2f3..56b8053 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -40,5 +40,11 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)

ifneq ($(CONFIG_IMX_CONFIG),) +ifdef CONFIG_SPL +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/SPL +endif +else ALL-y += $(obj)u-boot.imx endif +endif

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: - Rebase on current u-boot-arm/master.

Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: - New patch.

Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

arch/arm/cpu/arm926ejs/start.S | 10 ---------- 1 file changed, 10 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 0a9cf1d..3c9de3f 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -120,15 +120,11 @@ _fiq:

.globl _TEXT_BASE _TEXT_BASE: -#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ - .word CONFIG_SYS_TEXT_BASE -#else #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_SYS_TEXT_BASE #endif -#endif

/* * These are defined in the board-specific linker script. @@ -152,12 +148,6 @@ _bss_end_ofs: _end_ofs: .word _end - _start

-#ifdef CONFIG_NAND_U_BOOT -.globl _end -_end: - .word __bss_end -#endif - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START

make never uses the SHELL variable from the environment. Instead, it uses /bin/sh, or the value assigned to the SHELL variable by the Makefile. This makes the export of the SHELL variable useless for sub-makes (but still useful for the environment of recipes). However, we want all makes to use the same shell.

This patch fixes this issue by moving the SHELL variable setup and export to the top config.mk, so that all Makefile-s including it use the same shell.

Since BASH is used by default, this makes it possible to use things like 'echo -e ...' in sub-makes, which would otherwise fail e.g. with /bin/sh symlinked to /bin/dash on Ubuntu.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Reviewed-by: Tom Rini trini@ti.com --- Changes in v10: - Rebase on current u-boot-arm/master.

Changes in v9: None Changes in v8: - New patch.

Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

Makefile | 7 +------ config.mk | 7 +++++++ 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/Makefile b/Makefile index 2ab9e27..520d719 100644 --- a/Makefile +++ b/Makefile @@ -46,12 +46,7 @@ HOSTARCH := $(shell uname -m | \ HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ sed -e 's/(cygwin).*/cygwin/')

-# Set shell to bash if possible, otherwise fall back to sh -SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ - else if [ -x /bin/bash ]; then echo /bin/bash; \ - else echo sh; fi; fi) - -export HOSTARCH HOSTOS SHELL +export HOSTARCH HOSTOS

# Deal with colliding definitions from tcsh etc. VENDOR= diff --git a/config.mk b/config.mk index 4e6a19b..1fd109f 100644 --- a/config.mk +++ b/config.mk @@ -23,6 +23,13 @@

#########################################################################

+# Set shell to bash if possible, otherwise fall back to sh +SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ + else if [ -x /bin/bash ]; then echo /bin/bash; \ + else echo sh; fi; fi) + +export SHELL + ifeq ($(CURDIR),$(SRCTREE)) dir := else

This image combines the SPL with the i.MX header and U-Boot. This is a convenient way of having a single image to program on some boot devices.

The i.MX header has to be added to the SPL before appending U-Boot, so that the boot ROM loads only the SPL.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: None Changes in v9: None Changes in v8: - Use CONFIG_SPL_PAD_TO instead of CONFIG_SPL_MAX_SIZE for padding, which allows to pad the SPL after adding the i.MX header, which may save time when the boot ROM loads the SPL. - Add /u-boot-with-spl.imx to .gitignore.

Changes in v7: - New patch.

Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

.gitignore | 1 + Makefile | 5 +++++ arch/arm/imx-common/Makefile | 6 ++++++ 3 files changed, 12 insertions(+)

diff --git a/.gitignore b/.gitignore index bff721e..e42d837 100644 --- a/.gitignore +++ b/.gitignore @@ -30,6 +30,7 @@ /u-boot /u-boot.hex /u-boot.imx +/u-boot-with-spl.imx /u-boot.map /u-boot.srec /u-boot.ldr diff --git a/Makefile b/Makefile index 520d719..6db92b1 100644 --- a/Makefile +++ b/Makefile @@ -485,6 +485,10 @@ $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ rm $(obj)spl/u-boot-spl-pad.bin

+$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin + $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \ + $(OBJTREE)/u-boot-with-spl.imx + $(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \ -e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl @@ -849,6 +853,7 @@ clobber: tidy @rm -f $(obj)u-boot.kwb @rm -f $(obj)u-boot.pbl @rm -f $(obj)u-boot.imx + @rm -f $(obj)u-boot-with-spl.imx @rm -f $(obj)u-boot.ubl @rm -f $(obj)u-boot.ais @rm -f $(obj)u-boot.dtb diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index 6309fcd..2ce182d 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -54,6 +54,12 @@ $(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONF $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ -e $(CONFIG_SPL_TEXT_BASE) -d $< $@

+$(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ + -I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx + cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.bin > $@ + rm $(OBJTREE)/spl/u-boot-spl-pad.imx +

#########################################################################

The migration of boards from Makefile to boards.cfg was due for v2012.03, but smdk6400 did not follow, and it does not build, so move it to scrapyard. It will still be possible to restore it from the Git history before fixing it.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: - Rebase on current u-boot-arm/master.

Changes in v9: - Rebase following upstream changes on doc/README.scrapyard.

Changes in v8: - New patch.

Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

MAINTAINERS | 4 - Makefile | 17 -- arch/arm/include/asm/mach-types.h | 13 -- board/samsung/smdk6400/.gitignore | 5 - board/samsung/smdk6400/Makefile | 48 ----- board/samsung/smdk6400/config.mk | 30 --- board/samsung/smdk6400/lowlevel_init.S | 323 ---------------------------- board/samsung/smdk6400/smdk6400.c | 134 ------------ board/samsung/smdk6400/smdk6400_nand_spl.c | 36 ---- board/samsung/smdk6400/u-boot-nand.lds | 90 -------- doc/README.scrapyard | 1 + include/configs/smdk6400.h | 296 ------------------------- nand_spl/board/samsung/smdk6400/Makefile | 117 ---------- nand_spl/board/samsung/smdk6400/config.mk | 40 ---- nand_spl/board/samsung/smdk6400/u-boot.lds | 82 ------- 15 files changed, 1 insertion(+), 1235 deletions(-) delete mode 100644 board/samsung/smdk6400/.gitignore delete mode 100644 board/samsung/smdk6400/Makefile delete mode 100644 board/samsung/smdk6400/config.mk delete mode 100644 board/samsung/smdk6400/lowlevel_init.S delete mode 100644 board/samsung/smdk6400/smdk6400.c delete mode 100644 board/samsung/smdk6400/smdk6400_nand_spl.c delete mode 100644 board/samsung/smdk6400/u-boot-nand.lds delete mode 100644 include/configs/smdk6400.h delete mode 100644 nand_spl/board/samsung/smdk6400/Makefile delete mode 100644 nand_spl/board/samsung/smdk6400/config.mk delete mode 100644 nand_spl/board/samsung/smdk6400/u-boot.lds

diff --git a/MAINTAINERS b/MAINTAINERS index 1614b91..f9a5f4f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1029,10 +1029,6 @@ Vladimir Zapolskiy vz@mleia.com

devkit3250 lpc32xx

-Zhong Hongbo bocui107@gmail.com - - SMDK6400 ARM1176 (S3C6400 SoC) - Nobuhiro Iwamatsu nobuhiro.iwamatsu.yj@renesas.com Tetsuyuki Kobayashi koba@kmckk.co.jp

diff --git a/Makefile b/Makefile index 2328af7..577bcd6 100644 --- a/Makefile +++ b/Makefile @@ -783,23 +783,6 @@ lcname = $(shell echo $(1) | sed -e 's/(.*)_config/\L\1/') ucname = $(shell echo $(1) | sed -e 's/(.*)_config/\U\1/')

######################################################################### -## ARM1176 Systems -######################################################################### -smdk6400_noUSB_config \ -smdk6400_config : unconfig - @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 - @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 - @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk - @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ - echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - else \ - echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - fi - @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk - -######################################################################### #########################################################################

clean: diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index a676b6d..440b041 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -223,7 +223,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_MIOA701 1257 #define MACH_TYPE_ARMADILLO5X0 1260 #define MACH_TYPE_CC9P9360JS 1264 -#define MACH_TYPE_SMDK6400 1270 #define MACH_TYPE_NOKIA_N800 1271 #define MACH_TYPE_EP80219 1281 #define MACH_TYPE_GORAMO_MLR 1292 @@ -3640,18 +3639,6 @@ extern unsigned int __machine_arch_type; # define machine_is_cc9p9360js() (0) #endif

-#ifdef CONFIG_MACH_SMDK6400 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_SMDK6400 -# endif -# define machine_is_smdk6400() (machine_arch_type == MACH_TYPE_SMDK6400) -#else -# define machine_is_smdk6400() (0) -#endif - #ifdef CONFIG_MACH_NOKIA_N800 # ifdef machine_arch_type # undef machine_arch_type diff --git a/board/samsung/smdk6400/.gitignore b/board/samsung/smdk6400/.gitignore deleted file mode 100644 index 25ab492..0000000 --- a/board/samsung/smdk6400/.gitignore +++ /dev/null @@ -1,5 +0,0 @@ -# -# Generated files -# - -/config.tmp diff --git a/board/samsung/smdk6400/Makefile b/board/samsung/smdk6400/Makefile deleted file mode 100644 index 0d3e63b..0000000 --- a/board/samsung/smdk6400/Makefile +++ /dev/null @@ -1,48 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y := smdk6400.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(SOBJS) $(OBJS) - $(call cmd_link_o_target, $(SOBJS) $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/samsung/smdk6400/config.mk b/board/samsung/smdk6400/config.mk deleted file mode 100644 index 6f04c2f..0000000 --- a/board/samsung/smdk6400/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2008 -# Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de -# -# SAMSUNG SMDK6400 board with mDirac3 (ARM1176) cpu -# -# see http://www.samsung.com/ for more information on SAMSUNG - -# On SMDK6400 we use the 64 MB SDRAM bank at -# -# 0x50000000 to 0x58000000 -# -# Linux-Kernel is expected to be at 0x50008000, entry 0x50008000 -# -# we load ourselves to 0x57e00000 without MMU -# with MMU, load address is changed to 0xc7e00000 -# -# download area is 0x5000c000 - -sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -ifndef CONFIG_NAND_SPL -CONFIG_SYS_TEXT_BASE = $(RAM_TEXT) -else -CONFIG_SYS_TEXT_BASE = 0 -endif diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S deleted file mode 100644 index f7ce176..0000000 --- a/board/samsung/smdk6400/lowlevel_init.S +++ /dev/null @@ -1,323 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the Samsung SMDK2410 by - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <config.h> -#include <version.h> - -#include <asm/arch/s3c6400.h> - -#ifdef CONFIG_SERIAL1 -#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET) -#elif defined(CONFIG_SERIAL2) -#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET) -#else -#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET) -#endif - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - mov r12, lr - - /* LED on only #8 */ - ldr r0, =ELFIN_GPIO_BASE - ldr r1, =0x55540000 - str r1, [r0, #GPNCON_OFFSET] - - ldr r1, =0x55555555 - str r1, [r0, #GPNPUD_OFFSET] - - ldr r1, =0xf000 - str r1, [r0, #GPNDAT_OFFSET] - - /* Disable Watchdog */ - ldr r0, =0x7e000000 @0x7e004000 - orr r0, r0, #0x4000 - mov r1, #0 - str r1, [r0] - - /* External interrupt pending clear */ - ldr r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET) /*EINTPEND*/ - ldr r1, [r0] - str r1, [r0] - - ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000 - ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000 - - /* Disable all interrupts (VIC0 and VIC1) */ - mvn r3, #0x0 - str r3, [r0, #oINTMSK] - str r3, [r1, #oINTMSK] - - /* Set all interrupts as IRQ */ - mov r3, #0x0 - str r3, [r0, #oINTMOD] - str r3, [r1, #oINTMOD] - - /* Pending Interrupt Clear */ - mov r3, #0x0 - str r3, [r0, #oVECTADDR] - str r3, [r1, #oVECTADDR] - - /* init system clock */ - bl system_clock_init - -#ifndef CONFIG_NAND_SPL - /* for UART */ - bl uart_asm_init -#endif - -#ifdef CONFIG_BOOT_NAND - /* simple init for NAND */ - bl nand_asm_init -#endif - - /* Memory subsystem address 0x7e00f120 */ - ldr r0, =ELFIN_MEM_SYS_CFG - - /* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */ - mov r1, #S3C64XX_MEM_SYS_CFG_NAND - str r1, [r0] - - bl mem_ctrl_asm_init - -/* Wakeup support. Don't know if it's going to be used, untested. */ - ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) - ldr r1, [r0] - bic r1, r1, #0xfffffff7 - cmp r1, #0x8 - beq wakeup_reset - -1: - mov lr, r12 - mov pc, lr - -wakeup_reset: - - /* Clear wakeup status register */ - ldr r0, =(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET) - ldr r1, [r0] - str r1, [r0] - - /* LED test */ - ldr r0, =ELFIN_GPIO_BASE - ldr r1, =0x3000 - str r1, [r0, #GPNDAT_OFFSET] - - /* Load return address and jump to kernel */ - ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) - /* r1 = physical address of s3c6400_cpu_resume function */ - ldr r1, [r0] - /* Jump to kernel (sleep-s3c6400.S) */ - mov pc, r1 - nop - nop -/* - * system_clock_init: Initialize core clock and bus clock. - * void system_clock_init(void) - */ -system_clock_init: - ldr r0, =ELFIN_CLOCK_POWER_BASE /* 0x7e00f000 */ - -#ifdef CONFIG_SYNC_MODE - ldr r1, [r0, #OTHERS_OFFSET] - mov r2, #0x40 - orr r1, r1, r2 - str r1, [r0, #OTHERS_OFFSET] - - nop - nop - nop - nop - nop - - ldr r2, =0x80 - orr r1, r1, r2 - str r1, [r0, #OTHERS_OFFSET] - -check_syncack: - ldr r1, [r0, #OTHERS_OFFSET] - ldr r2, =0xf00 - and r1, r1, r2 - cmp r1, #0xf00 - bne check_syncack -#else /* ASYNC Mode */ - nop - nop - nop - nop - nop - - /* - * This was unconditional in original Samsung sources, but it doesn't - * seem to make much sense on S3C6400. - */ -#ifndef CONFIG_S3C6400 - ldr r1, [r0, #OTHERS_OFFSET] - bic r1, r1, #0xC0 - orr r1, r1, #0x40 - str r1, [r0, #OTHERS_OFFSET] - -wait_for_async: - ldr r1, [r0, #OTHERS_OFFSET] - and r1, r1, #0xf00 - cmp r1, #0x0 - bne wait_for_async -#endif - - ldr r1, [r0, #OTHERS_OFFSET] - bic r1, r1, #0x40 - str r1, [r0, #OTHERS_OFFSET] -#endif - - mov r1, #0xff00 - orr r1, r1, #0xff - str r1, [r0, #APLL_LOCK_OFFSET] - str r1, [r0, #MPLL_LOCK_OFFSET] - - /* Set Clock Divider */ - ldr r1, [r0, #CLK_DIV0_OFFSET] - bic r1, r1, #0x30000 - bic r1, r1, #0xff00 - bic r1, r1, #0xff - ldr r2, =CLK_DIV_VAL - orr r1, r1, r2 - str r1, [r0, #CLK_DIV0_OFFSET] - - ldr r1, =APLL_VAL - str r1, [r0, #APLL_CON_OFFSET] - ldr r1, =MPLL_VAL - str r1, [r0, #MPLL_CON_OFFSET] - - /* FOUT of EPLL is 96MHz */ - ldr r1, =0x200203 - str r1, [r0, #EPLL_CON0_OFFSET] - ldr r1, =0x0 - str r1, [r0, #EPLL_CON1_OFFSET] - - /* APLL, MPLL, EPLL select to Fout */ - ldr r1, [r0, #CLK_SRC_OFFSET] - orr r1, r1, #0x7 - str r1, [r0, #CLK_SRC_OFFSET] - - /* wait at least 200us to stablize all clock */ - mov r1, #0x10000 -1: subs r1, r1, #1 - bne 1b - - /* Synchronization for VIC port */ -#if defined(CONFIG_SYNC_MODE) - ldr r1, [r0, #OTHERS_OFFSET] - orr r1, r1, #0x20 - str r1, [r0, #OTHERS_OFFSET] -#elif !defined(CONFIG_S3C6400) - /* According to 661558um_S3C6400X_rev10.pdf 0x20 is reserved */ - ldr r1, [r0, #OTHERS_OFFSET] - bic r1, r1, #0x20 - str r1, [r0, #OTHERS_OFFSET] -#endif - mov pc, lr - - -#ifndef CONFIG_NAND_SPL -/* - * uart_asm_init: Initialize UART's pins - */ -uart_asm_init: - /* set GPIO to enable UART */ - ldr r0, =ELFIN_GPIO_BASE - ldr r1, =0x220022 - str r1, [r0, #GPACON_OFFSET] - mov pc, lr -#endif - -#ifdef CONFIG_BOOT_NAND -/* - * NAND Interface init for SMDK6400 - */ -nand_asm_init: - ldr r0, =ELFIN_NAND_BASE - ldr r1, [r0, #NFCONF_OFFSET] - orr r1, r1, #0x70 - orr r1, r1, #0x7700 - str r1, [r0, #NFCONF_OFFSET] - - ldr r1, [r0, #NFCONT_OFFSET] - orr r1, r1, #0x07 - str r1, [r0, #NFCONT_OFFSET] - - mov pc, lr -#endif - -#ifdef CONFIG_ENABLE_MMU -/* - * MMU Table for SMDK6400 - */ - - /* form a first-level section entry */ -.macro FL_SECTION_ENTRY base,ap,d,c,b - .word (\base << 20) | (\ap << 10) | \ - (\d << 5) | (1<<4) | (\c << 3) | (\b << 2) | (1<<1) -.endm - -.section .mmudata, "a" - .align 14 - /* the following alignment creates the mmu table at address 0x4000. */ - .globl mmu_table -mmu_table: - .set __base, 0 - /* 1:1 mapping for debugging */ - .rept 0xA00 - FL_SECTION_ENTRY __base, 3, 0, 0, 0 - .set __base, __base + 1 - .endr - - /* access is not allowed. */ - .rept 0xC00 - 0xA00 - .word 0x00000000 - .endr - - /* 128MB for SDRAM 0xC0000000 -> 0x50000000 */ - .set __base, 0x500 - .rept 0xC80 - 0xC00 - FL_SECTION_ENTRY __base, 3, 0, 1, 1 - .set __base, __base + 1 - .endr - - /* access is not allowed. */ - .rept 0x1000 - 0xc80 - .word 0x00000000 - .endr -#endif diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c deleted file mode 100644 index c40d1f9..0000000 --- a/board/samsung/smdk6400/smdk6400.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/s3c6400.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -#define CS8900_Tacs 0x0 /* 0clk address set-up */ -#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */ -#define CS8900_Tacc 0xE /* 14clk access cycle */ -#define CS8900_Tcoh 0x1 /* 1clk chip selection hold */ -#define CS8900_Tah 0x4 /* 4clk address holding time */ -#define CS8900_Tacp 0x6 /* 6clk page mode access cycle */ -#define CS8900_PMC 0x0 /* normal(1data)page mode configuration */ - -static inline void delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b" - : "=r" (loops) : "0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -static void cs8900_pre_init(void) -{ - SROM_BW_REG &= ~(0xf << 4); - SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4); - SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) + - (CS8900_Tacc << 16) + (CS8900_Tcoh << 12) + - (CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC); -} - -int board_init(void) -{ - cs8900_pre_init(); - - /* NOR-flash in SROM0 */ - - /* Enable WAIT */ - SROM_BW_REG |= 4 | 8 | 1; - - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - - return 0; -} - -#ifdef CONFIG_DISPLAY_BOARDINFO -int checkboard(void) -{ - printf("Board: SMDK6400\n"); - return 0; -} -#endif - -#ifdef CONFIG_ENABLE_MMU -ulong virt_to_phy_smdk6400(ulong addr) -{ - if ((0xc0000000 <= addr) && (addr < 0xc8000000)) - return addr - 0xc0000000 + 0x50000000; - else - printf("do not support this address : %08lx\n", addr); - - return addr; -} -#endif - -ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info) -{ - if (banknum == 0) { /* non-CFI boot flash */ - info->portwidth = FLASH_CFI_16BIT; - info->chipwidth = FLASH_CFI_BY16; - info->interface = FLASH_CFI_X16; - return 1; - } else - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/samsung/smdk6400/smdk6400_nand_spl.c b/board/samsung/smdk6400/smdk6400_nand_spl.c deleted file mode 100644 index 26a6146..0000000 --- a/board/samsung/smdk6400/smdk6400_nand_spl.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -void board_init_f(unsigned long bootflag) -{ - relocate_code(CONFIG_SYS_TEXT_BASE); -} diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds deleted file mode 100644 index 7c74267..0000000 --- a/board/samsung/smdk6400/u-boot-nand.lds +++ /dev/null @@ -1,90 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - arch/arm/cpu/arm1176/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - - . = align(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN(4); - - __image_copy_end = .; - - . = align(4); - .mmudata : { *(.mmudata) } - - . = ALIGN(4); - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - - .dynsym : { - __dynsym_start = .; - *(.dynsym) - } - - _end = .; - - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss) - . = ALIGN(4); - __bss_end = .; - } - - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } -} diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 189b883..2cdb8a9 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +smdk6400 arm arm1176 - - Zhong Hongbo bocui107@gmail.com ns9750dev arm arm926ejs - - Markus Pietrek mpietrek@fsforth.de AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk wd@denx.de c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk wd@denx.de diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h deleted file mode 100644 index d4dc8ef..0000000 --- a/include/configs/smdk6400.h +++ /dev/null @@ -1,296 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * Gary Jennejohn garyj@denx.de - * David Mueller d.mueller@elsoft.ch - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */ -#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ -#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ - -#define CONFIG_PERIPORT_REMAP -#define CONFIG_PERIPORT_BASE 0x70000000 -#define CONFIG_PERIPORT_SIZE 0x13 - -#define CONFIG_SYS_IRAM_BASE 0x0c000000 /* Internal SRAM base address */ -#define CONFIG_SYS_IRAM_SIZE 0x2000 /* 8 KB of internal SRAM memory */ -#define CONFIG_SYS_IRAM_END (CONFIG_SYS_IRAM_BASE + CONFIG_SYS_IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IRAM_END - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_SDRAM_BASE 0x50000000 - -/* input clock of PLL: SMDK6400 has 12MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 12000000 - -#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000) -#define CONFIG_ENABLE_MMU -#endif - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG - -/* - * Architecture magic and machine type - */ -#define CONFIG_MACH_TYPE 1270 - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x18800300 -#define CONFIG_CS8900_BUS16 /* follow the Linux driver */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */ - -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - -#define CONFIG_CMDLINE_EDITING - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NAND -#if defined(CONFIG_BOOT_ONENAND) -#define CONFIG_CMD_ONENAND -#endif -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_ZERO_BOOTDELAY_CHECK - -#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/********************************** - Support Clock Settings - ********************************** - Setting SYNC ASYNC - ---------------------------------- - 667_133_66 X O - 533_133_66 O O - 400_133_66 X O - 400_100_50 O O - **********************************/ - -/*#define CONFIG_CLK_667_133_66*/ -#define CONFIG_CLK_533_133_66 -/* -#define CONFIG_CLK_400_100_50 -#define CONFIG_CLK_400_133_66 -#define CONFIG_SYNC_MODE -*/ - -/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -/* AM29LV160B has 35 sectors, AM29LV800B - 19 */ -#define CONFIG_SYS_MAX_FLASH_SECT 40 - -#define CONFIG_AMD_LV800 -#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */ -/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx16 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* - * SMDK6400 board specific data - */ - -#define CONFIG_IDENT_STRING " for SMDK6400" - -/* base address for uboot */ -#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x07e00000) -/* total memory available to uboot */ -#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024) - -/* Put environment copies after the end of U-Boot owned RAM */ -#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) - -#ifdef CONFIG_ENABLE_MMU -#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 -#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \ - "bootm 0xc0018000" -#else -#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE -#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \ - "bootm 0x50018000" -#endif - -/* NAND U-Boot load and start address */ -#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000) - -#define CONFIG_ENV_OFFSET 0x0040000 - -/* NAND configuration */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x70200010 -#define CONFIG_SYS_S3C_NAND_HWECC - -#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ -#define CONFIG_SYS_NAND_WP 1 -#define CONFIG_SYS_NAND_YAFFS_WRITE 1 /* support yaffs write */ -#define CONFIG_SYS_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */ - -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE /* NUB load-addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* NUB start-addr */ - -#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */ - -/* NAND chip page size */ -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -/* NAND chip block size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -/* NAND chip page per block count */ -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -/* Location of the bad-block label */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -/* Extra address cycle for > 128MiB */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE - -/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */ -#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE -/* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */ -#define CONFIG_SYS_NAND_ECCBYTES 4 -/* Size of a single OOB region */ -#define CONFIG_SYS_NAND_OOBSIZE 64 -/* ECC byte positions */ -#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ - 48, 49, 50, 51, 52, 53, 54, 55, \ - 56, 57, 58, 59, 60, 61, 62, 63} - -/* Boot configuration (define only one of next 3) */ -#define CONFIG_BOOT_NAND -/* None of these are currently implemented. Left from the original Samsung - * version for reference -#define CONFIG_BOOT_NOR -#define CONFIG_BOOT_MOVINAND -#define CONFIG_BOOT_ONENAND -*/ - -#define CONFIG_NAND -#define CONFIG_NAND_S3C64XX -/* Unimplemented or unsupported. See comment above. -#define CONFIG_ONENAND -#define CONFIG_MOVINAND -*/ - -/* Settings as above boot configuration */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_BOOTARGS "console=ttySAC,115200" - -#if !defined(CONFIG_ENABLE_MMU) -#define CONFIG_CMD_USB 1 -#define CONFIG_USB_S3C64XX -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x74300000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c6400" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 - -#define CONFIG_USB_STORAGE 1 -#endif -#define CONFIG_DOS_PARTITION 1 - -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU) -# error "usb_ohci.c is currently broken with MMU enabled." -#endif - -#endif /* __CONFIG_H */ diff --git a/nand_spl/board/samsung/smdk6400/Makefile b/nand_spl/board/samsung/smdk6400/Makefile deleted file mode 100644 index c9e75ba..0000000 --- a/nand_spl/board/samsung/smdk6400/Makefile +++ /dev/null @@ -1,117 +0,0 @@ -# -# (C) Copyright 2006-2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# (C) Copyright 2008 -# Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -CONFIG_NAND_SPL = y - -include $(TOPDIR)/config.mk -include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk - -nandobj := $(OBJTREE)/nand_spl/ - -LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ - $(LDFLAGS_FINAL) -gc-sections -AFLAGS += -DCONFIG_NAND_SPL -CFLAGS += -DCONFIG_NAND_SPL -ffunction-sections - -SOBJS = start.o cpu_init.o lowlevel_init.o -COBJS = nand_boot.o nand_ecc.o s3c64xx.o smdk6400_nand_spl.o nand_base.o - -SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -# from cpu directory -$(obj)start.S: - @rm -f $@ - @ln -s $(TOPDIR)/arch/arm/cpu/arm1176/start.S $@ - -# from SoC directory -$(obj)cpu_init.S: - @rm -f $@ - @ln -s $(TOPDIR)/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S $@ - -# from board directory -$(obj)lowlevel_init.S: - @rm -f $@ - @ln -s $(TOPDIR)/board/samsung/smdk6400/lowlevel_init.S $@ - -# from nand_spl directory -$(obj)nand_boot.c: - @rm -f $@ - @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@ - -# from drivers/mtd/nand directory -$(obj)nand_ecc.c: - @rm -f $@ - @ln -s $(TOPDIR)/drivers/mtd/nand/nand_ecc.c $@ - -$(obj)s3c64xx.c: - @rm -f $@ - @ln -s $(TOPDIR)/drivers/mtd/nand/s3c64xx.c $@ - -$(obj)smdk6400_nand_spl.c: - @rm -f $@ - @ln -s $(TOPDIR)/board/samsung/smdk6400/smdk6400_nand_spl.c $@ - -$(obj)nand_base.c: - @rm -f $@ - @ln -s $(TOPDIR)/drivers/mtd/nand/nand_base.c $@ -######################################################################### - -$(obj)%.o: $(obj)%.S - $(CC) $(AFLAGS) -c -o $@ $< - -$(obj)%.o: $(obj)%.c - $(CC) $(CFLAGS) -c -o $@ $< - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/nand_spl/board/samsung/smdk6400/config.mk b/nand_spl/board/samsung/smdk6400/config.mk deleted file mode 100644 index 8bea498..0000000 --- a/nand_spl/board/samsung/smdk6400/config.mk +++ /dev/null @@ -1,40 +0,0 @@ -# -# (C) Copyright 2006 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# -# Samsung S3C64xx Reference Platform (smdk6400) board - -# CONFIG_SYS_TEXT_BASE for SPL: -# -# On S3C64xx platforms the SPL is located in SRAM at 0. -# -# CONFIG_SYS_TEXT_BASE = 0 - -include $(TOPDIR)/board/$(BOARDDIR)/config.mk - -# PAD_TO used to generate a 4kByte binary needed for the combined image -# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 4096 -PAD_TO := $(shell expr $$[$(CONFIG_SYS_TEXT_BASE) + 4096]) - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds deleted file mode 100644 index 78907fd..0000000 --- a/nand_spl/board/samsung/smdk6400/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - start.o (.text) - cpu_init.o (.text) - nand_boot.o (.text) - - *(.text) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - - . = ALIGN(4); - .u_boot_list : { - *(SORT(.u_boot_list*)); - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - - .dynsym : { - __dynsym_start = .; - *(.dynsym) - } - - _end = .; - - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss) - . = ALIGN(4); - __bss_end = .; - } -}

Following the removal of the smdk6400 board, the s3c64xx SoC becomes unused, so remove associated code. It will still be possible to restore it later from the Git history if necessary.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: None Changes in v9: - Do not use "scrapyard" in patch description because this is reserved to refer to the board scrapyard file.

Changes in v8: - New patch.

Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

arch/arm/cpu/arm1176/s3c64xx/Makefile | 50 -- arch/arm/cpu/arm1176/s3c64xx/config.mk | 34 - arch/arm/cpu/arm1176/s3c64xx/cpu_init.S | 135 ---- arch/arm/cpu/arm1176/s3c64xx/init.c | 26 - arch/arm/cpu/arm1176/s3c64xx/reset.S | 34 - arch/arm/cpu/arm1176/s3c64xx/speed.c | 145 ----- arch/arm/cpu/arm1176/s3c64xx/timer.c | 160 ----- arch/arm/include/asm/arch-s3c64xx/hardware.h | 63 -- arch/arm/include/asm/arch-s3c64xx/s3c6400.h | 895 -------------------------- arch/arm/include/asm/arch-s3c64xx/s3c64x0.h | 90 --- doc/driver-model/UDM-serial.txt | 42 +- drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/s3c64xx.c | 295 --------- drivers/mtd/onenand/onenand_base.c | 4 - drivers/mtd/onenand/samsung.c | 60 +- drivers/serial/Makefile | 1 - drivers/serial/s3c64xx.c | 187 ------ drivers/serial/serial.c | 2 - drivers/usb/host/Makefile | 1 - drivers/usb/host/ohci-hcd.c | 1 - drivers/usb/host/s3c64xx-hcd.c | 45 -- include/common.h | 1 - include/onenand_uboot.h | 4 - 23 files changed, 23 insertions(+), 2253 deletions(-) delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/Makefile delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/config.mk delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/cpu_init.S delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/init.c delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/reset.S delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/speed.c delete mode 100644 arch/arm/cpu/arm1176/s3c64xx/timer.c delete mode 100644 arch/arm/include/asm/arch-s3c64xx/hardware.h delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c64x0.h delete mode 100644 drivers/mtd/nand/s3c64xx.c delete mode 100644 drivers/serial/s3c64xx.c delete mode 100644 drivers/usb/host/s3c64xx-hcd.c

diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile b/arch/arm/cpu/arm1176/s3c64xx/Makefile deleted file mode 100644 index 266a073..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(SOC).o - -SOBJS = reset.o - -COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o -COBJS-y += timer.o init.o - -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) - -all: $(obj).depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/arm1176/s3c64xx/config.mk b/arch/arm/cpu/arm1176/s3c64xx/config.mk deleted file mode 100644 index 222d352..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/config.mk +++ /dev/null @@ -1,34 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - -# Make ARMv5 to allow more compilers to work, even though its v6. -PLATFORM_CPPFLAGS += -march=armv5t -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,\ - $(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S b/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S deleted file mode 100644 index df88cba..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400 - * - * Copyright (C) 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/s3c6400.h> - - .globl mem_ctrl_asm_init -mem_ctrl_asm_init: - /* DMC1 base address 0x7e001000 */ - ldr r0, =ELFIN_DMC1_BASE - - ldr r1, =0x4 - str r1, [r0, #INDEX_DMC_MEMC_CMD] - - ldr r1, =DMC_DDR_REFRESH_PRD - str r1, [r0, #INDEX_DMC_REFRESH_PRD] - - ldr r1, =DMC_DDR_CAS_LATENCY - str r1, [r0, #INDEX_DMC_CAS_LATENCY] - - ldr r1, =DMC_DDR_t_DQSS - str r1, [r0, #INDEX_DMC_T_DQSS] - - ldr r1, =DMC_DDR_t_MRD - str r1, [r0, #INDEX_DMC_T_MRD] - - ldr r1, =DMC_DDR_t_RAS - str r1, [r0, #INDEX_DMC_T_RAS] - - ldr r1, =DMC_DDR_t_RC - str r1, [r0, #INDEX_DMC_T_RC] - - ldr r1, =DMC_DDR_t_RCD - ldr r2, =DMC_DDR_schedule_RCD - orr r1, r1, r2 - str r1, [r0, #INDEX_DMC_T_RCD] - - ldr r1, =DMC_DDR_t_RFC - ldr r2, =DMC_DDR_schedule_RFC - orr r1, r1, r2 - str r1, [r0, #INDEX_DMC_T_RFC] - - ldr r1, =DMC_DDR_t_RP - ldr r2, =DMC_DDR_schedule_RP - orr r1, r1, r2 - str r1, [r0, #INDEX_DMC_T_RP] - - ldr r1, =DMC_DDR_t_RRD - str r1, [r0, #INDEX_DMC_T_RRD] - - ldr r1, =DMC_DDR_t_WR - str r1, [r0, #INDEX_DMC_T_WR] - - ldr r1, =DMC_DDR_t_WTR - str r1, [r0, #INDEX_DMC_T_WTR] - - ldr r1, =DMC_DDR_t_XP - str r1, [r0, #INDEX_DMC_T_XP] - - ldr r1, =DMC_DDR_t_XSR - str r1, [r0, #INDEX_DMC_T_XSR] - - ldr r1, =DMC_DDR_t_ESR - str r1, [r0, #INDEX_DMC_T_ESR] - - ldr r1, =DMC1_MEM_CFG - str r1, [r0, #INDEX_DMC_MEMORY_CFG] - - ldr r1, =DMC1_MEM_CFG2 - str r1, [r0, #INDEX_DMC_MEMORY_CFG2] - - ldr r1, =DMC1_CHIP0_CFG - str r1, [r0, #INDEX_DMC_CHIP_0_CFG] - - ldr r1, =DMC_DDR_32_CFG - str r1, [r0, #INDEX_DMC_USER_CONFIG] - - /* DMC0 DDR Chip 0 configuration direct command reg */ - ldr r1, =DMC_NOP0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Precharge All */ - ldr r1, =DMC_PA0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Auto Refresh 2 time */ - ldr r1, =DMC_AR0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* MRS */ - ldr r1, =DMC_mDDR_EMR0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Mode Reg */ - ldr r1, =DMC_mDDR_MR0 - str r1, [r0, #INDEX_DMC_DIRECT_CMD] - - /* Enable DMC1 */ - mov r1, #0x0 - str r1, [r0, #INDEX_DMC_MEMC_CMD] - -check_dmc1_ready: - ldr r1, [r0, #INDEX_DMC_MEMC_STATUS] - mov r2, #0x3 - and r1, r1, r2 - cmp r1, #0x1 - bne check_dmc1_ready - nop - - mov pc, lr - - .ltorg diff --git a/arch/arm/cpu/arm1176/s3c64xx/init.c b/arch/arm/cpu/arm1176/s3c64xx/init.c deleted file mode 100644 index f113d8e..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/init.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * (C) Copyright 2012 Ashok Kumar Reddy Kourla - * ashokkourla2000@gmail.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include<common.h> - -int arch_cpu_init(void) -{ - icache_enable(); - - return 0; -} diff --git a/arch/arm/cpu/arm1176/s3c64xx/reset.S b/arch/arm/cpu/arm1176/s3c64xx/reset.S deleted file mode 100644 index eae572e..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/reset.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 2009 Samsung Electronics. - * Minkyu Kang mk7.kang@samsung.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm/arch/s3c6400.h> - -.globl reset_cpu -reset_cpu: - ldr r1, =ELFIN_CLOCK_POWER_BASE - ldr r2, [r1, #SYS_ID_OFFSET] - ldr r3, =0xffff - and r2, r3, r2, lsr #12 - str r2, [r1, #SW_RST_OFFSET] -_loop_forever: - b _loop_forever diff --git a/arch/arm/cpu/arm1176/s3c64xx/speed.c b/arch/arm/cpu/arm1176/s3c64xx/speed.c deleted file mode 100644 index 11962ac..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/speed.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2001-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * This code should work for both the S3C2400 and the S3C2410 - * as they seem to have the same PLL and clock machinery inside. - * The different address mapping is handled by the s3c24xx.h files below. - */ - -#include <common.h> -#include <asm/arch/s3c6400.h> - -#define APLL 0 -#define MPLL 1 -#define EPLL 2 - -/* ------------------------------------------------------------------------- */ -/* - * NOTE: This describes the proper use of this file. - * - * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL. - * - * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of - * the specified bus in HZ. - */ -/* ------------------------------------------------------------------------- */ - -static ulong get_PLLCLK(int pllreg) -{ - ulong r, m, p, s; - - switch (pllreg) { - case APLL: - r = APLL_CON_REG; - break; - case MPLL: - r = MPLL_CON_REG; - break; - case EPLL: - r = EPLL_CON0_REG; - break; - default: - hang(); - } - - m = (r >> 16) & 0x3ff; - p = (r >> 8) & 0x3f; - s = r & 0x7; - - return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s))); -} - -/* return ARMCORE frequency */ -ulong get_ARMCLK(void) -{ - ulong div; - - div = CLK_DIV0_REG; - - return get_PLLCLK(APLL) / ((div & 0x7) + 1); -} - -/* return FCLK frequency */ -ulong get_FCLK(void) -{ - return get_PLLCLK(APLL); -} - -/* return HCLK frequency */ -ulong get_HCLK(void) -{ - ulong fclk; - - uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; - uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1; - - /* - * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on - * s3c6400 and is always 0, and it is indeed running in ASYNC mode - */ - if (OTHERS_REG & 0x80) - fclk = get_FCLK(); /* SYNC Mode */ - else - fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ - - return fclk / (hclk_div * hclkx2_div); -} - -/* return PCLK frequency */ -ulong get_PCLK(void) -{ - ulong fclk; - uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; - uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1; - - if (OTHERS_REG & 0x80) - fclk = get_FCLK(); /* SYNC Mode */ - else - fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ - - return fclk / (hclkx2_div * pre_div); -} - -/* return UCLK frequency */ -ulong get_UCLK(void) -{ - return get_PLLCLK(EPLL); -} - -int print_cpuinfo(void) -{ - printf("\nCPU: S3C6400@%luMHz\n", get_ARMCLK() / 1000000); - printf(" Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ", - get_FCLK() / 1000000, get_HCLK() / 1000000, - get_PCLK() / 1000000); - - if (OTHERS_REG & 0x80) - printf("(SYNC Mode) \n"); - else - printf("(ASYNC Mode) \n"); - return 0; -} diff --git a/arch/arm/cpu/arm1176/s3c64xx/timer.c b/arch/arm/cpu/arm1176/s3c64xx/timer.c deleted file mode 100644 index f16a37b..0000000 --- a/arch/arm/cpu/arm1176/s3c64xx/timer.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments <www.ti.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke azu@sysgo.de - * - * (C) Copyright 2002-2004 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * (C) Copyright 2004 - * Philippe Robin, ARM Ltd. philippe.robin@arm.com - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/proc-armv/ptrace.h> -#include <asm/arch/s3c6400.h> -#include <div64.h> - -static ulong timer_load_val; - -#define PRESCALER 167 - -static s3c64xx_timers *s3c64xx_get_base_timers(void) -{ - return (s3c64xx_timers *)ELFIN_TIMER_BASE; -} - -/* macro to read the 16 bit timer */ -static inline ulong read_timer(void) -{ - s3c64xx_timers *const timers = s3c64xx_get_base_timers(); - - return timers->TCNTO4; -} - -/* Internal tick units */ -/* Last decremneter snapshot */ -static unsigned long lastdec; -/* Monotonic incrementing timer */ -static unsigned long long timestamp; - -int timer_init(void) -{ - s3c64xx_timers *const timers = s3c64xx_get_base_timers(); - - /* use PWM Timer 4 because it has no output */ - /* - * We use the following scheme for the timer: - * Prescaler is hard fixed at 167, divider at 1/4. - * This gives at PCLK frequency 66MHz approx. 10us ticks - * The timer is set to wrap after 100s, at 66MHz this obviously - * happens after 10,000,000 ticks. A long variable can thus - * keep values up to 40,000s, i.e., 11 hours. This should be - * enough for most uses:-) Possible optimizations: select a - * binary-friendly frequency, e.g., 1ms / 128. Also calculate - * the prescaler automatically for other PCLK frequencies. - */ - timers->TCFG0 = PRESCALER << 8; - if (timer_load_val == 0) { - timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */ - timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000; - } - - /* load value for 10 ms timeout */ - lastdec = timers->TCNTB4 = timer_load_val; - /* auto load, manual update of Timer 4 */ - timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | - TCON_4_UPDATE; - - /* auto load, start Timer 4 */ - timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON; - timestamp = 0; - - return 0; -} - -/* - * timer without interrupts - */ - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - ulong now = read_timer(); - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + timer_load_val - now; - } - lastdec = now; - - return timestamp; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - /* We overrun in 100s */ - return (ulong)(timer_load_val / 100); -} - -ulong get_timer_masked(void) -{ - unsigned long long res = get_ticks(); - do_div (res, (timer_load_val / (100 * CONFIG_SYS_HZ))); - return res; -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = (usec + 9) / 10; - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp)/* loop till event */ - /*NOP*/; -} diff --git a/arch/arm/include/asm/arch-s3c64xx/hardware.h b/arch/arm/include/asm/arch-s3c64xx/hardware.h deleted file mode 100644 index 84d24c9..0000000 --- a/arch/arm/include/asm/arch-s3c64xx/hardware.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400 - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ARCH_HARDWARE_H_ -#define _ARCH_HARDWARE_H_ - -#include <asm/sizes.h> - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) - -#define __REG(x) (*(vu_long *)(x)) -#define __REGl(x) (*(vu_long *)(x)) -#define __REGw(x) (*(vu_short *)(x)) -#define __REGb(x) (*(vu_char *)(x)) -#define __REG2(x, y) (*(vu_long *)((x) + (y))) -#else -#define UData(Data) (Data) - -#define __REG(x) (x) -#define __REGl(x) (x) -#define __REGw(x) (x) -#define __REGb(x) (x) -#define __REG2(x, y) ((x) + (y)) -#endif - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - -#define FClrBit(Data, Bit) (Data = (Data & ~(Bit))) -#define FClrFld(Data, Field) (Data = (Data & ~FMsk(Field))) - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - -#endif /* _ARCH_HARDWARE_H_ */ diff --git a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h b/arch/arm/include/asm/arch-s3c64xx/s3c6400.h deleted file mode 100644 index 10b3324..0000000 --- a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h +++ /dev/null @@ -1,895 +0,0 @@ -/* - * (C) Copyright 2007 - * Byungjae Lee, Samsung Erectronics, bjlee@samsung.com. - * - only support for S3C6400 - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : s3c6400.h - * - * Based on S3C6400 User's manual Rev 0.0 - ************************************************/ - -#ifndef __S3C6400_H__ -#define __S3C6400_H__ - -#define S3C64XX_UART_CHANNELS 3 -#define S3C64XX_SPI_CHANNELS 2 - -#include <asm/hardware.h> - -#define ELFIN_CLOCK_POWER_BASE 0x7e00f000 - -/* Clock & Power Controller for mDirac3*/ -#define APLL_LOCK_OFFSET 0x00 -#define MPLL_LOCK_OFFSET 0x04 -#define EPLL_LOCK_OFFSET 0x08 -#define APLL_CON_OFFSET 0x0C -#define MPLL_CON_OFFSET 0x10 -#define EPLL_CON0_OFFSET 0x14 -#define EPLL_CON1_OFFSET 0x18 -#define CLK_SRC_OFFSET 0x1C -#define CLK_DIV0_OFFSET 0x20 -#define CLK_DIV1_OFFSET 0x24 -#define CLK_DIV2_OFFSET 0x28 -#define CLK_OUT_OFFSET 0x2C -#define HCLK_GATE_OFFSET 0x30 -#define PCLK_GATE_OFFSET 0x34 -#define SCLK_GATE_OFFSET 0x38 -#define AHB_CON0_OFFSET 0x100 -#define AHB_CON1_OFFSET 0x104 -#define AHB_CON2_OFFSET 0x108 -#define SELECT_DMA_OFFSET 0x110 -#define SW_RST_OFFSET 0x114 -#define SYS_ID_OFFSET 0x118 -#define MEM_SYS_CFG_OFFSET 0x120 -#define QOS_OVERRIDE0_OFFSET 0x124 -#define QOS_OVERRIDE1_OFFSET 0x128 -#define MEM_CFG_STAT_OFFSET 0x12C -#define PWR_CFG_OFFSET 0x804 -#define EINT_MASK_OFFSET 0x808 -#define NOR_CFG_OFFSET 0x810 -#define STOP_CFG_OFFSET 0x814 -#define SLEEP_CFG_OFFSET 0x818 -#define OSC_FREQ_OFFSET 0x820 -#define OSC_STABLE_OFFSET 0x824 -#define PWR_STABLE_OFFSET 0x828 -#define FPC_STABLE_OFFSET 0x82C -#define MTC_STABLE_OFFSET 0x830 -#define OTHERS_OFFSET 0x900 -#define RST_STAT_OFFSET 0x904 -#define WAKEUP_STAT_OFFSET 0x908 -#define BLK_PWR_STAT_OFFSET 0x90C -#define INF_REG0_OFFSET 0xA00 -#define INF_REG1_OFFSET 0xA04 -#define INF_REG2_OFFSET 0xA08 -#define INF_REG3_OFFSET 0xA0C -#define INF_REG4_OFFSET 0xA10 -#define INF_REG5_OFFSET 0xA14 -#define INF_REG6_OFFSET 0xA18 -#define INF_REG7_OFFSET 0xA1C - -#define OSC_CNT_VAL_OFFSET 0x824 -#define PWR_CNT_VAL_OFFSET 0x828 -#define FPC_CNT_VAL_OFFSET 0x82C -#define MTC_CNT_VAL_OFFSET 0x830 - -#define APLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) -#define MPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) -#define EPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) -#define APLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) -#define MPLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) -#define EPLL_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) -#define EPLL_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) -#define CLK_SRC_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) -#define CLK_DIV0_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) -#define CLK_DIV1_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) -#define CLK_DIV2_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) -#define CLK_OUT_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) -#define HCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) -#define PCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) -#define SCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) -#define AHB_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) -#define AHB_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) -#define AHB_CON2_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) -#define SELECT_DMA_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - SELECT_DMA_OFFSET) -#define SW_RST_REG __REG(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) -#define SYS_ID_REG __REG(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) -#define MEM_SYS_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MEM_SYS_CFG_OFFSET) -#define QOS_OVERRIDE0_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - QOS_OVERRIDE0_OFFSET) -#define QOS_OVERRIDE1_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - QOS_OVERRIDE1_OFFSET) -#define MEM_CFG_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MEM_CFG_STAT_OFFSET) -#define PWR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) -#define EINT_MASK_REG __REG(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) -#define NOR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) -#define STOP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) -#define SLEEP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) -#define OSC_FREQ_REG __REG(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) -#define OSC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - OSC_CNT_VAL_OFFSET) -#define PWR_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - PWR_CNT_VAL_OFFSET) -#define FPC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - FPC_CNT_VAL_OFFSET) -#define MTC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - MTC_CNT_VAL_OFFSET) -#define OTHERS_REG __REG(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) -#define RST_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) -#define WAKEUP_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - WAKEUP_STAT_OFFSET) -#define BLK_PWR_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ - BLK_PWR_STAT_OFFSET) -#define INF_REG0_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) -#define INF_REG1_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) -#define INF_REG2_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) -#define INF_REG3_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) -#define INF_REG4_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) -#define INF_REG5_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) -#define INF_REG6_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) -#define INF_REG7_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) - -#define APLL_LOCK (ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) -#define MPLL_LOCK (ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) -#define EPLL_LOCK (ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) -#define APLL_CON (ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) -#define MPLL_CON (ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) -#define EPLL_CON0 (ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) -#define EPLL_CON1 (ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) -#define CLK_SRC (ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) -#define CLK_DIV0 (ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) -#define CLK_DIV1 (ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) -#define CLK_DIV2 (ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) -#define CLK_OUT (ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) -#define HCLK_GATE (ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) -#define PCLK_GATE (ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) -#define SCLK_GATE (ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) -#define AHB_CON0 (ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) -#define AHB_CON1 (ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) -#define AHB_CON2 (ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) -#define SELECT_DMA (ELFIN_CLOCK_POWER_BASE + SELECT_DMA_OFFSET) -#define SW_RST (ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) -#define SYS_ID (ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) -#define MEM_SYS_CFG (ELFIN_CLOCK_POWER_BASE + MEM_SYS_CFG_OFFSET) -#define QOS_OVERRIDE0 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE0_OFFSET) -#define QOS_OVERRIDE1 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE1_OFFSET) -#define MEM_CFG_STAT (ELFIN_CLOCK_POWER_BASE + MEM_CFG_STAT_OFFSET) -#define PWR_CFG (ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) -#define EINT_MASK (ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) -#define NOR_CFG (ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) -#define STOP_CFG (ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) -#define SLEEP_CFG (ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) -#define OSC_FREQ (ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) -#define OSC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + OSC_CNT_VAL_OFFSET) -#define PWR_CNT_VAL (ELFIN_CLOCK_POWER_BASE + PWR_CNT_VAL_OFFSET) -#define FPC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + FPC_CNT_VAL_OFFSET) -#define MTC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + MTC_CNT_VAL_OFFSET) -#define OTHERS (ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) -#define RST_STAT (ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) -#define WAKEUP_STAT (ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET) -#define BLK_PWR_STAT (ELFIN_CLOCK_POWER_BASE + BLK_PWR_STAT_OFFSET) -#define INF_REG0 (ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) -#define INF_REG1 (ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) -#define INF_REG2 (ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) -#define INF_REG3 (ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) -#define INF_REG4 (ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) -#define INF_REG5 (ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) -#define INF_REG6 (ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) -#define INF_REG7 (ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) - - -/* - * GPIO - */ -#define ELFIN_GPIO_BASE 0x7f008000 - -#define GPACON_OFFSET 0x00 -#define GPADAT_OFFSET 0x04 -#define GPAPUD_OFFSET 0x08 -#define GPACONSLP_OFFSET 0x0C -#define GPAPUDSLP_OFFSET 0x10 -#define GPBCON_OFFSET 0x20 -#define GPBDAT_OFFSET 0x24 -#define GPBPUD_OFFSET 0x28 -#define GPBCONSLP_OFFSET 0x2C -#define GPBPUDSLP_OFFSET 0x30 -#define GPCCON_OFFSET 0x40 -#define GPCDAT_OFFSET 0x44 -#define GPCPUD_OFFSET 0x48 -#define GPCCONSLP_OFFSET 0x4C -#define GPCPUDSLP_OFFSET 0x50 -#define GPDCON_OFFSET 0x60 -#define GPDDAT_OFFSET 0x64 -#define GPDPUD_OFFSET 0x68 -#define GPDCONSLP_OFFSET 0x6C -#define GPDPUDSLP_OFFSET 0x70 -#define GPECON_OFFSET 0x80 -#define GPEDAT_OFFSET 0x84 -#define GPEPUD_OFFSET 0x88 -#define GPECONSLP_OFFSET 0x8C -#define GPEPUDSLP_OFFSET 0x90 -#define GPFCON_OFFSET 0xA0 -#define GPFDAT_OFFSET 0xA4 -#define GPFPUD_OFFSET 0xA8 -#define GPFCONSLP_OFFSET 0xAC -#define GPFPUDSLP_OFFSET 0xB0 -#define GPGCON_OFFSET 0xC0 -#define GPGDAT_OFFSET 0xC4 -#define GPGPUD_OFFSET 0xC8 -#define GPGCONSLP_OFFSET 0xCC -#define GPGPUDSLP_OFFSET 0xD0 -#define GPHCON0_OFFSET 0xE0 -#define GPHCON1_OFFSET 0xE4 -#define GPHDAT_OFFSET 0xE8 -#define GPHPUD_OFFSET 0xEC -#define GPHCONSLP_OFFSET 0xF0 -#define GPHPUDSLP_OFFSET 0xF4 -#define GPICON_OFFSET 0x100 -#define GPIDAT_OFFSET 0x104 -#define GPIPUD_OFFSET 0x108 -#define GPICONSLP_OFFSET 0x10C -#define GPIPUDSLP_OFFSET 0x110 -#define GPJCON_OFFSET 0x120 -#define GPJDAT_OFFSET 0x124 -#define GPJPUD_OFFSET 0x128 -#define GPJCONSLP_OFFSET 0x12C -#define GPJPUDSLP_OFFSET 0x130 -#define MEM0DRVCON_OFFSET 0x1D0 -#define MEM1DRVCON_OFFSET 0x1D4 -#define GPKCON0_OFFSET 0x800 -#define GPKCON1_OFFSET 0x804 -#define GPKDAT_OFFSET 0x808 -#define GPKPUD_OFFSET 0x80C -#define GPLCON0_OFFSET 0x810 -#define GPLCON1_OFFSET 0x814 -#define GPLDAT_OFFSET 0x818 -#define GPLPUD_OFFSET 0x81C -#define GPMCON_OFFSET 0x820 -#define GPMDAT_OFFSET 0x824 -#define GPMPUD_OFFSET 0x828 -#define GPNCON_OFFSET 0x830 -#define GPNDAT_OFFSET 0x834 -#define GPNPUD_OFFSET 0x838 -#define GPOCON_OFFSET 0x140 -#define GPODAT_OFFSET 0x144 -#define GPOPUD_OFFSET 0x148 -#define GPOCONSLP_OFFSET 0x14C -#define GPOPUDSLP_OFFSET 0x150 -#define GPPCON_OFFSET 0x160 -#define GPPDAT_OFFSET 0x164 -#define GPPPUD_OFFSET 0x168 -#define GPPCONSLP_OFFSET 0x16C -#define GPPPUDSLP_OFFSET 0x170 -#define GPQCON_OFFSET 0x180 -#define GPQDAT_OFFSET 0x184 -#define GPQPUD_OFFSET 0x188 -#define GPQCONSLP_OFFSET 0x18C -#define GPQPUDSLP_OFFSET 0x190 - -#define EINTPEND_OFFSET 0x924 - -#define GPACON_REG __REG(ELFIN_GPIO_BASE + GPACON_OFFSET) -#define GPADAT_REG __REG(ELFIN_GPIO_BASE + GPADAT_OFFSET) -#define GPAPUD_REG __REG(ELFIN_GPIO_BASE + GPAPUD_OFFSET) -#define GPACONSLP_REG __REG(ELFIN_GPIO_BASE + GPACONSLP_OFFSET) -#define GPAPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) -#define GPBCON_REG __REG(ELFIN_GPIO_BASE + GPBCON_OFFSET) -#define GPBDAT_REG __REG(ELFIN_GPIO_BASE + GPBDAT_OFFSET) -#define GPBPUD_REG __REG(ELFIN_GPIO_BASE + GPBPUD_OFFSET) -#define GPBCONSLP_REG __REG(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) -#define GPBPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) -#define GPCCON_REG __REG(ELFIN_GPIO_BASE + GPCCON_OFFSET) -#define GPCDAT_REG __REG(ELFIN_GPIO_BASE + GPCDAT_OFFSET) -#define GPCPUD_REG __REG(ELFIN_GPIO_BASE + GPCPUD_OFFSET) -#define GPCCONSLP_REG __REG(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) -#define GPCPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) -#define GPDCON_REG __REG(ELFIN_GPIO_BASE + GPDCON_OFFSET) -#define GPDDAT_REG __REG(ELFIN_GPIO_BASE + GPDDAT_OFFSET) -#define GPDPUD_REG __REG(ELFIN_GPIO_BASE + GPDPUD_OFFSET) -#define GPDCONSLP_REG __REG(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) -#define GPDPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) -#define GPECON_REG __REG(ELFIN_GPIO_BASE + GPECON_OFFSET) -#define GPEDAT_REG __REG(ELFIN_GPIO_BASE + GPEDAT_OFFSET) -#define GPEPUD_REG __REG(ELFIN_GPIO_BASE + GPEPUD_OFFSET) -#define GPECONSLP_REG __REG(ELFIN_GPIO_BASE + GPECONSLP_OFFSET) -#define GPEPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) -#define GPFCON_REG __REG(ELFIN_GPIO_BASE + GPFCON_OFFSET) -#define GPFDAT_REG __REG(ELFIN_GPIO_BASE + GPFDAT_OFFSET) -#define GPFPUD_REG __REG(ELFIN_GPIO_BASE + GPFPUD_OFFSET) -#define GPFCONSLP_REG __REG(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) -#define GPFPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) -#define GPGCON_REG __REG(ELFIN_GPIO_BASE + GPGCON_OFFSET) -#define GPGDAT_REG __REG(ELFIN_GPIO_BASE + GPGDAT_OFFSET) -#define GPGPUD_REG __REG(ELFIN_GPIO_BASE + GPGPUD_OFFSET) -#define GPGCONSLP_REG __REG(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) -#define GPGPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) -#define GPHCON0_REG __REG(ELFIN_GPIO_BASE + GPHCON0_OFFSET) -#define GPHCON1_REG __REG(ELFIN_GPIO_BASE + GPHCON1_OFFSET) -#define GPHDAT_REG __REG(ELFIN_GPIO_BASE + GPHDAT_OFFSET) -#define GPHPUD_REG __REG(ELFIN_GPIO_BASE + GPHPUD_OFFSET) -#define GPHCONSLP_REG __REG(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) -#define GPHPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) -#define GPICON_REG __REG(ELFIN_GPIO_BASE + GPICON_OFFSET) -#define GPIDAT_REG __REG(ELFIN_GPIO_BASE + GPIDAT_OFFSET) -#define GPIPUD_REG __REG(ELFIN_GPIO_BASE + GPIPUD_OFFSET) -#define GPICONSLP_REG __REG(ELFIN_GPIO_BASE + GPICONSLP_OFFSET) -#define GPIPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) -#define GPJCON_REG __REG(ELFIN_GPIO_BASE + GPJCON_OFFSET) -#define GPJDAT_REG __REG(ELFIN_GPIO_BASE + GPJDAT_OFFSET) -#define GPJPUD_REG __REG(ELFIN_GPIO_BASE + GPJPUD_OFFSET) -#define GPJCONSLP_REG __REG(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) -#define GPJPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) -#define GPKCON0_REG __REG(ELFIN_GPIO_BASE + GPKCON0_OFFSET) -#define GPKCON1_REG __REG(ELFIN_GPIO_BASE + GPKCON1_OFFSET) -#define GPKDAT_REG __REG(ELFIN_GPIO_BASE + GPKDAT_OFFSET) -#define GPKPUD_REG __REG(ELFIN_GPIO_BASE + GPKPUD_OFFSET) -#define GPLCON0_REG __REG(ELFIN_GPIO_BASE + GPLCON0_OFFSET) -#define GPLCON1_REG __REG(ELFIN_GPIO_BASE + GPLCON1_OFFSET) -#define GPLDAT_REG __REG(ELFIN_GPIO_BASE + GPLDAT_OFFSET) -#define GPLPUD_REG __REG(ELFIN_GPIO_BASE + GPLPUD_OFFSET) -#define GPMCON_REG __REG(ELFIN_GPIO_BASE + GPMCON_OFFSET) -#define GPMDAT_REG __REG(ELFIN_GPIO_BASE + GPMDAT_OFFSET) -#define GPMPUD_REG __REG(ELFIN_GPIO_BASE + GPMPUD_OFFSET) -#define GPNCON_REG __REG(ELFIN_GPIO_BASE + GPNCON_OFFSET) -#define GPNDAT_REG __REG(ELFIN_GPIO_BASE + GPNDAT_OFFSET) -#define GPNPUD_REG __REG(ELFIN_GPIO_BASE + GPNPUD_OFFSET) -#define GPOCON_REG __REG(ELFIN_GPIO_BASE + GPOCON_OFFSET) -#define GPODAT_REG __REG(ELFIN_GPIO_BASE + GPODAT_OFFSET) -#define GPOPUD_REG __REG(ELFIN_GPIO_BASE + GPOPUD_OFFSET) -#define GPOCONSLP_REG __REG(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) -#define GPOPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) -#define GPPCON_REG __REG(ELFIN_GPIO_BASE + GPPCON_OFFSET) -#define GPPDAT_REG __REG(ELFIN_GPIO_BASE + GPPDAT_OFFSET) -#define GPPPUD_REG __REG(ELFIN_GPIO_BASE + GPPPUD_OFFSET) -#define GPPCONSLP_REG __REG(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) -#define GPPPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) -#define GPQCON_REG __REG(ELFIN_GPIO_BASE + GPQCON_OFFSET) -#define GPQDAT_REG __REG(ELFIN_GPIO_BASE + GPQDAT_OFFSET) -#define GPQPUD_REG __REG(ELFIN_GPIO_BASE + GPQPUD_OFFSET) -#define GPQCONSLP_REG __REG(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) -#define GPQPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) - -/* - * Bus Matrix - */ -#define ELFIN_MEM_SYS_CFG 0x7e00f120 - -#define S3C64XX_MEM_SYS_CFG_16BIT (1 << 12) - -#define S3C64XX_MEM_SYS_CFG_NAND 0x0008 -#define S3C64XX_MEM_SYS_CFG_ONENAND S3C64XX_MEM_SYS_CFG_16BIT - -#define GPACON (ELFIN_GPIO_BASE + GPACON_OFFSET) -#define GPADAT (ELFIN_GPIO_BASE + GPADAT_OFFSET) -#define GPAPUD (ELFIN_GPIO_BASE + GPAPUD_OFFSET) -#define GPACONSLP (ELFIN_GPIO_BASE + GPACONSLP_OFFSET) -#define GPAPUDSLP (ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) -#define GPBCON (ELFIN_GPIO_BASE + GPBCON_OFFSET) -#define GPBDAT (ELFIN_GPIO_BASE + GPBDAT_OFFSET) -#define GPBPUD (ELFIN_GPIO_BASE + GPBPUD_OFFSET) -#define GPBCONSLP (ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) -#define GPBPUDSLP (ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) -#define GPCCON (ELFIN_GPIO_BASE + GPCCON_OFFSET) -#define GPCDAT (ELFIN_GPIO_BASE + GPCDAT_OFFSET) -#define GPCPUD (ELFIN_GPIO_BASE + GPCPUD_OFFSET) -#define GPCCONSLP (ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) -#define GPCPUDSLP (ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) -#define GPDCON (ELFIN_GPIO_BASE + GPDCON_OFFSET) -#define GPDDAT (ELFIN_GPIO_BASE + GPDDAT_OFFSET) -#define GPDPUD (ELFIN_GPIO_BASE + GPDPUD_OFFSET) -#define GPDCONSLP (ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) -#define GPDPUDSLP (ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) -#define GPECON (ELFIN_GPIO_BASE + GPECON_OFFSET) -#define GPEDAT (ELFIN_GPIO_BASE + GPEDAT_OFFSET) -#define GPEPUD (ELFIN_GPIO_BASE + GPEPUD_OFFSET) -#define GPECONSLP (ELFIN_GPIO_BASE + GPECONSLP_OFFSET) -#define GPEPUDSLP (ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) -#define GPFCON (ELFIN_GPIO_BASE + GPFCON_OFFSET) -#define GPFDAT (ELFIN_GPIO_BASE + GPFDAT_OFFSET) -#define GPFPUD (ELFIN_GPIO_BASE + GPFPUD_OFFSET) -#define GPFCONSLP (ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) -#define GPFPUDSLP (ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) -#define GPGCON (ELFIN_GPIO_BASE + GPGCON_OFFSET) -#define GPGDAT (ELFIN_GPIO_BASE + GPGDAT_OFFSET) -#define GPGPUD (ELFIN_GPIO_BASE + GPGPUD_OFFSET) -#define GPGCONSLP (ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) -#define GPGPUDSLP (ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) -#define GPHCON0 (ELFIN_GPIO_BASE + GPHCON0_OFFSET) -#define GPHCON1 (ELFIN_GPIO_BASE + GPHCON1_OFFSET) -#define GPHDAT (ELFIN_GPIO_BASE + GPHDAT_OFFSET) -#define GPHPUD (ELFIN_GPIO_BASE + GPHPUD_OFFSET) -#define GPHCONSLP (ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) -#define GPHPUDSLP (ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) -#define GPICON (ELFIN_GPIO_BASE + GPICON_OFFSET) -#define GPIDAT (ELFIN_GPIO_BASE + GPIDAT_OFFSET) -#define GPIPUD (ELFIN_GPIO_BASE + GPIPUD_OFFSET) -#define GPICONSLP (ELFIN_GPIO_BASE + GPICONSLP_OFFSET) -#define GPIPUDSLP (ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) -#define GPJCON (ELFIN_GPIO_BASE + GPJCON_OFFSET) -#define GPJDAT (ELFIN_GPIO_BASE + GPJDAT_OFFSET) -#define GPJPUD (ELFIN_GPIO_BASE + GPJPUD_OFFSET) -#define GPJCONSLP (ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) -#define GPJPUDSLP (ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) -#define GPKCON0 (ELFIN_GPIO_BASE + GPKCON0_OFFSET) -#define GPKCON1 (ELFIN_GPIO_BASE + GPKCON1_OFFSET) -#define GPKDAT (ELFIN_GPIO_BASE + GPKDAT_OFFSET) -#define GPKPUD (ELFIN_GPIO_BASE + GPKPUD_OFFSET) -#define GPLCON0 (ELFIN_GPIO_BASE + GPLCON0_OFFSET) -#define GPLCON1 (ELFIN_GPIO_BASE + GPLCON1_OFFSET) -#define GPLDAT (ELFIN_GPIO_BASE + GPLDAT_OFFSET) -#define GPLPUD (ELFIN_GPIO_BASE + GPLPUD_OFFSET) -#define GPMCON (ELFIN_GPIO_BASE + GPMCON_OFFSET) -#define GPMDAT (ELFIN_GPIO_BASE + GPMDAT_OFFSET) -#define GPMPUD (ELFIN_GPIO_BASE + GPMPUD_OFFSET) -#define GPNCON (ELFIN_GPIO_BASE + GPNCON_OFFSET) -#define GPNDAT (ELFIN_GPIO_BASE + GPNDAT_OFFSET) -#define GPNPUD (ELFIN_GPIO_BASE + GPNPUD_OFFSET) -#define GPOCON (ELFIN_GPIO_BASE + GPOCON_OFFSET) -#define GPODAT (ELFIN_GPIO_BASE + GPODAT_OFFSET) -#define GPOPUD (ELFIN_GPIO_BASE + GPOPUD_OFFSET) -#define GPOCONSLP (ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) -#define GPOPUDSLP (ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) -#define GPPCON (ELFIN_GPIO_BASE + GPPCON_OFFSET) -#define GPPDAT (ELFIN_GPIO_BASE + GPPDAT_OFFSET) -#define GPPPUD (ELFIN_GPIO_BASE + GPPPUD_OFFSET) -#define GPPCONSLP (ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) -#define GPPPUDSLP (ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) -#define GPQCON (ELFIN_GPIO_BASE + GPQCON_OFFSET) -#define GPQDAT (ELFIN_GPIO_BASE + GPQDAT_OFFSET) -#define GPQPUD (ELFIN_GPIO_BASE + GPQPUD_OFFSET) -#define GPQCONSLP (ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) -#define GPQPUDSLP (ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) - -/* - * Memory controller - */ -#define ELFIN_SROM_BASE 0x70000000 - -#define SROM_BW_REG __REG(ELFIN_SROM_BASE + 0x0) -#define SROM_BC0_REG __REG(ELFIN_SROM_BASE + 0x4) -#define SROM_BC1_REG __REG(ELFIN_SROM_BASE + 0x8) -#define SROM_BC2_REG __REG(ELFIN_SROM_BASE + 0xC) -#define SROM_BC3_REG __REG(ELFIN_SROM_BASE + 0x10) -#define SROM_BC4_REG __REG(ELFIN_SROM_BASE + 0x14) -#define SROM_BC5_REG __REG(ELFIN_SROM_BASE + 0x18) - -/* - * SDRAM Controller - */ -#define ELFIN_DMC0_BASE 0x7e000000 -#define ELFIN_DMC1_BASE 0x7e001000 - -#define INDEX_DMC_MEMC_STATUS 0x00 -#define INDEX_DMC_MEMC_CMD 0x04 -#define INDEX_DMC_DIRECT_CMD 0x08 -#define INDEX_DMC_MEMORY_CFG 0x0C -#define INDEX_DMC_REFRESH_PRD 0x10 -#define INDEX_DMC_CAS_LATENCY 0x14 -#define INDEX_DMC_T_DQSS 0x18 -#define INDEX_DMC_T_MRD 0x1C -#define INDEX_DMC_T_RAS 0x20 -#define INDEX_DMC_T_RC 0x24 -#define INDEX_DMC_T_RCD 0x28 -#define INDEX_DMC_T_RFC 0x2C -#define INDEX_DMC_T_RP 0x30 -#define INDEX_DMC_T_RRD 0x34 -#define INDEX_DMC_T_WR 0x38 -#define INDEX_DMC_T_WTR 0x3C -#define INDEX_DMC_T_XP 0x40 -#define INDEX_DMC_T_XSR 0x44 -#define INDEX_DMC_T_ESR 0x48 -#define INDEX_DMC_MEMORY_CFG2 0x4C -#define INDEX_DMC_CHIP_0_CFG 0x200 -#define INDEX_DMC_CHIP_1_CFG 0x204 -#define INDEX_DMC_CHIP_2_CFG 0x208 -#define INDEX_DMC_CHIP_3_CFG 0x20C -#define INDEX_DMC_USER_STATUS 0x300 -#define INDEX_DMC_USER_CONFIG 0x304 - -/* - * Memory Chip direct command - */ -#define DMC_NOP0 0x0c0000 -#define DMC_NOP1 0x1c0000 -#define DMC_PA0 0x000000 /* Precharge all */ -#define DMC_PA1 0x100000 -#define DMC_AR0 0x040000 /* Autorefresh */ -#define DMC_AR1 0x140000 -#define DMC_SDR_MR0 0x080032 /* MRS, CAS 3, Burst Length 4 */ -#define DMC_SDR_MR1 0x180032 -#define DMC_DDR_MR0 0x080162 -#define DMC_DDR_MR1 0x180162 -#define DMC_mDDR_MR0 0x080032 /* CAS 3, Burst Length 4 */ -#define DMC_mDDR_MR1 0x180032 -#define DMC_mSDR_EMR0 0x0a0000 /* EMRS, DS:Full, PASR:Full Array */ -#define DMC_mSDR_EMR1 0x1a0000 -#define DMC_DDR_EMR0 0x090000 -#define DMC_DDR_EMR1 0x190000 -#define DMC_mDDR_EMR0 0x0a0000 /* DS:Full, PASR:Full Array */ -#define DMC_mDDR_EMR1 0x1a0000 - -/* - * Definitions for memory configuration - * Set memory configuration - * active_chips = 1'b0 (1 chip) - * qos_master_chip = 3'b000(ARID[3:0]) - * memory burst = 3'b010(burst 4) - * stop_mem_clock = 1'b0(disable dynamical stop) - * auto_power_down = 1'b0(disable auto power-down mode) - * power_down_prd = 6'b00_0000(0 cycle for auto power-down) - * ap_bit = 1'b0 (bit position of auto-precharge is 10) - * row_bits = 3'b010(# row address 13) - * column_bits = 3'b010(# column address 10 ) - * - * Set user configuration - * 2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR - * - * Set chip select for chip [n] - * row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff - * CHIP_[n]_CFG=0x30F8, 30: ADDR[31:24], F8: Mask[31:24] - */ - -/* - * Nand flash controller - */ -#define ELFIN_NAND_BASE 0x70200000 - -#define NFCONF_OFFSET 0x00 -#define NFCONT_OFFSET 0x04 -#define NFCMMD_OFFSET 0x08 -#define NFADDR_OFFSET 0x0c -#define NFDATA_OFFSET 0x10 -#define NFMECCDATA0_OFFSET 0x14 -#define NFMECCDATA1_OFFSET 0x18 -#define NFSECCDATA0_OFFSET 0x1c -#define NFSBLK_OFFSET 0x20 -#define NFEBLK_OFFSET 0x24 -#define NFSTAT_OFFSET 0x28 -#define NFESTAT0_OFFSET 0x2c -#define NFESTAT1_OFFSET 0x30 -#define NFMECC0_OFFSET 0x34 -#define NFMECC1_OFFSET 0x38 -#define NFSECC_OFFSET 0x3c -#define NFMLCBITPT_OFFSET 0x40 - -#define NFCONF (ELFIN_NAND_BASE + NFCONF_OFFSET) -#define NFCONT (ELFIN_NAND_BASE + NFCONT_OFFSET) -#define NFCMMD (ELFIN_NAND_BASE + NFCMMD_OFFSET) -#define NFADDR (ELFIN_NAND_BASE + NFADDR_OFFSET) -#define NFDATA (ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFMECCDATA0 (ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) -#define NFMECCDATA1 (ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) -#define NFSECCDATA0 (ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) -#define NFSBLK (ELFIN_NAND_BASE + NFSBLK_OFFSET) -#define NFEBLK (ELFIN_NAND_BASE + NFEBLK_OFFSET) -#define NFSTAT (ELFIN_NAND_BASE + NFSTAT_OFFSET) -#define NFESTAT0 (ELFIN_NAND_BASE + NFESTAT0_OFFSET) -#define NFESTAT1 (ELFIN_NAND_BASE + NFESTAT1_OFFSET) -#define NFMECC0 (ELFIN_NAND_BASE + NFMECC0_OFFSET) -#define NFMECC1 (ELFIN_NAND_BASE + NFMECC1_OFFSET) -#define NFSECC (ELFIN_NAND_BASE + NFSECC_OFFSET) -#define NFMLCBITPT (ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) - -#define NFCONF_REG __REG(ELFIN_NAND_BASE + NFCONF_OFFSET) -#define NFCONT_REG __REG(ELFIN_NAND_BASE + NFCONT_OFFSET) -#define NFCMD_REG __REG(ELFIN_NAND_BASE + NFCMMD_OFFSET) -#define NFADDR_REG __REG(ELFIN_NAND_BASE + NFADDR_OFFSET) -#define NFDATA_REG __REG(ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFDATA8_REG __REGb(ELFIN_NAND_BASE + NFDATA_OFFSET) -#define NFMECCDATA0_REG __REG(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) -#define NFMECCDATA1_REG __REG(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) -#define NFSECCDATA0_REG __REG(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) -#define NFSBLK_REG __REG(ELFIN_NAND_BASE + NFSBLK_OFFSET) -#define NFEBLK_REG __REG(ELFIN_NAND_BASE + NFEBLK_OFFSET) -#define NFSTAT_REG __REG(ELFIN_NAND_BASE + NFSTAT_OFFSET) -#define NFESTAT0_REG __REG(ELFIN_NAND_BASE + NFESTAT0_OFFSET) -#define NFESTAT1_REG __REG(ELFIN_NAND_BASE + NFESTAT1_OFFSET) -#define NFMECC0_REG __REG(ELFIN_NAND_BASE + NFMECC0_OFFSET) -#define NFMECC1_REG __REG(ELFIN_NAND_BASE + NFMECC1_OFFSET) -#define NFSECC_REG __REG(ELFIN_NAND_BASE + NFSECC_OFFSET) -#define NFMLCBITPT_REG __REG(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) - -#define NFCONF_ECC_4BIT (1<<24) - -#define NFCONT_ECC_ENC (1<<18) -#define NFCONT_WP (1<<16) -#define NFCONT_MECCLOCK (1<<7) -#define NFCONT_SECCLOCK (1<<6) -#define NFCONT_INITMECC (1<<5) -#define NFCONT_INITSECC (1<<4) -#define NFCONT_INITECC (NFCONT_INITMECC | NFCONT_INITSECC) -#define NFCONT_CS_ALT (1<<2) -#define NFCONT_CS (1<<1) -#define NFCONT_ENABLE (1<<0) - -#define NFSTAT_ECCENCDONE (1<<7) -#define NFSTAT_ECCDECDONE (1<<6) -#define NFSTAT_RnB (1<<0) - -#define NFESTAT0_ECCBUSY (1<<31) - -/* - * Interrupt - */ -#define ELFIN_VIC0_BASE_ADDR 0x71200000 -#define ELFIN_VIC1_BASE_ADDR 0x71300000 -#define oINTMOD 0x0C /* VIC INT SELECT (IRQ or FIQ) */ -#define oINTUNMSK 0x10 /* VIC INT EN (write 1 to unmask) */ -#define oINTMSK 0x14 /* VIC INT EN CLEAR (write 1 to mask) */ -#define oINTSUBMSK 0x1C /* VIC SOFT INT CLEAR */ -#define oVECTADDR 0xF00 /* VIC ADDRESS */ - -/* - * Watchdog timer - */ -#define ELFIN_WATCHDOG_BASE 0x7E004000 - -#define WTCON_REG __REG(0x7E004004) -#define WTDAT_REG __REG(0x7E004008) -#define WTCNT_REG __REG(0x7E00400C) - - -/* - * UART - */ -#define ELFIN_UART_BASE 0x7F005000 - -#define ELFIN_UART0_OFFSET 0x0000 -#define ELFIN_UART1_OFFSET 0x0400 -#define ELFIN_UART2_OFFSET 0x0800 - -#define ULCON_OFFSET 0x00 -#define UCON_OFFSET 0x04 -#define UFCON_OFFSET 0x08 -#define UMCON_OFFSET 0x0C -#define UTRSTAT_OFFSET 0x10 -#define UERSTAT_OFFSET 0x14 -#define UFSTAT_OFFSET 0x18 -#define UMSTAT_OFFSET 0x1C -#define UTXH_OFFSET 0x20 -#define URXH_OFFSET 0x24 -#define UBRDIV_OFFSET 0x28 -#define UDIVSLOT_OFFSET 0x2C -#define UINTP_OFFSET 0x30 -#define UINTSP_OFFSET 0x34 -#define UINTM_OFFSET 0x38 - -#define ULCON0_REG __REG(0x7F005000) -#define UCON0_REG __REG(0x7F005004) -#define UFCON0_REG __REG(0x7F005008) -#define UMCON0_REG __REG(0x7F00500C) -#define UTRSTAT0_REG __REG(0x7F005010) -#define UERSTAT0_REG __REG(0x7F005014) -#define UFSTAT0_REG __REG(0x7F005018) -#define UMSTAT0_REG __REG(0x7F00501c) -#define UTXH0_REG __REG(0x7F005020) -#define URXH0_REG __REG(0x7F005024) -#define UBRDIV0_REG __REG(0x7F005028) -#define UDIVSLOT0_REG __REG(0x7F00502c) -#define UINTP0_REG __REG(0x7F005030) -#define UINTSP0_REG __REG(0x7F005034) -#define UINTM0_REG __REG(0x7F005038) - -#define ULCON1_REG __REG(0x7F005400) -#define UCON1_REG __REG(0x7F005404) -#define UFCON1_REG __REG(0x7F005408) -#define UMCON1_REG __REG(0x7F00540C) -#define UTRSTAT1_REG __REG(0x7F005410) -#define UERSTAT1_REG __REG(0x7F005414) -#define UFSTAT1_REG __REG(0x7F005418) -#define UMSTAT1_REG __REG(0x7F00541c) -#define UTXH1_REG __REG(0x7F005420) -#define URXH1_REG __REG(0x7F005424) -#define UBRDIV1_REG __REG(0x7F005428) -#define UDIVSLOT1_REG __REG(0x7F00542c) -#define UINTP1_REG __REG(0x7F005430) -#define UINTSP1_REG __REG(0x7F005434) -#define UINTM1_REG __REG(0x7F005438) - -#define UTRSTAT_TX_EMPTY (1 << 2) -#define UTRSTAT_RX_READY (1 << 0) -#define UART_ERR_MASK 0xF - -/* - * PWM timer - */ -#define ELFIN_TIMER_BASE 0x7F006000 - -#define TCFG0_REG __REG(0x7F006000) -#define TCFG1_REG __REG(0x7F006004) -#define TCON_REG __REG(0x7F006008) -#define TCNTB0_REG __REG(0x7F00600c) -#define TCMPB0_REG __REG(0x7F006010) -#define TCNTO0_REG __REG(0x7F006014) -#define TCNTB1_REG __REG(0x7F006018) -#define TCMPB1_REG __REG(0x7F00601c) -#define TCNTO1_REG __REG(0x7F006020) -#define TCNTB2_REG __REG(0x7F006024) -#define TCMPB2_REG __REG(0x7F006028) -#define TCNTO2_REG __REG(0x7F00602c) -#define TCNTB3_REG __REG(0x7F006030) -#define TCMPB3_REG __REG(0x7F006034) -#define TCNTO3_REG __REG(0x7F006038) -#define TCNTB4_REG __REG(0x7F00603c) -#define TCNTO4_REG __REG(0x7F006040) - -/* Fields */ -#define fTCFG0_DZONE Fld(8, 16) /* the dead zone length (=timer 0) */ -#define fTCFG0_PRE1 Fld(8, 8) /* prescaler value for time 2,3,4 */ -#define fTCFG0_PRE0 Fld(8, 0) /* prescaler value for time 0,1 */ -#define fTCFG1_MUX4 Fld(4, 16) -/* bits */ -#define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE) -#define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1) -#define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0) -#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */ -#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */ -#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */ -#define COUNT_4_ON (TCON_4_ONOFF * 1) -#define COUNT_4_OFF (TCON_4_ONOFF * 0) -#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */ -#define TIMER3_ATLOAD_ON (TCON_3_AUTO * 1) -#define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO) -#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */ -#define TIMER3_IVT_ON (TCON_3_INVERT * 1) -#define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT)) -#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */ -#define TIMER3_MANUP (TCON_3_MAN*1) -#define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN)) -#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */ -#define TIMER3_ON (TCON_3_ONOFF * 1) -#define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF)) - -#if defined(CONFIG_CLK_400_100_50) -#define STARTUP_AMDIV 400 -#define STARTUP_MDIV 400 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_400_133_66) -#define STARTUP_AMDIV 400 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_533_133_66) -#define STARTUP_AMDIV 533 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#elif defined(CONFIG_CLK_667_133_66) -#define STARTUP_AMDIV 667 -#define STARTUP_MDIV 533 -#define STARTUP_PDIV 6 -#define STARTUP_SDIV 1 -#endif - -#define STARTUP_PCLKDIV 3 -#define STARTUP_HCLKX2DIV 1 -#define STARTUP_HCLKDIV 1 -#define STARTUP_MPLLDIV 1 -#define STARTUP_APLLDIV 0 - -#define CLK_DIV_VAL ((STARTUP_PCLKDIV << 12) | (STARTUP_HCLKX2DIV << 9) | \ - (STARTUP_HCLKDIV << 8) | (STARTUP_MPLLDIV<<4) | STARTUP_APLLDIV) -#define MPLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_MPLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_MDIV) - -#if defined(CONFIG_SYNC_MODE) -#define APLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_MDIV) -#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ - (STARTUP_HCLKDIV + 1)) -#else -#define APLL_VAL ((1 << 31) | (STARTUP_AMDIV << 16) | \ - (STARTUP_PDIV << 8) | STARTUP_SDIV) -#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ - STARTUP_PDIV) * STARTUP_AMDIV) -#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ - (STARTUP_HCLKDIV + 1)) -#endif - - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define DMC1_MEM_CFG 0x00010012 /* burst 4, 13-bit row, 10-bit col */ -#define DMC1_MEM_CFG2 0xB45 -#define DMC1_CHIP0_CFG 0x150F8 /* 0x5000_0000~0x57ff_ffff (128 MiB) */ -#define DMC_DDR_32_CFG 0x0 /* 32bit, DDR */ - -/* Memory Parameters */ -/* DDR Parameters */ -#define DDR_tREFRESH 7800 /* ns */ -#define DDR_tRAS 45 /* ns (min: 45ns)*/ -#define DDR_tRC 68 /* ns (min: 67.5ns)*/ -#define DDR_tRCD 23 /* ns (min: 22.5ns)*/ -#define DDR_tRFC 80 /* ns (min: 80ns)*/ -#define DDR_tRP 23 /* ns (min: 22.5ns)*/ -#define DDR_tRRD 15 /* ns (min: 15ns)*/ -#define DDR_tWR 15 /* ns (min: 15ns)*/ -#define DDR_tXSR 120 /* ns (min: 120ns)*/ -#define DDR_CASL 3 /* CAS Latency 3 */ - -/* - * mDDR memory configuration - */ - -#define NS_TO_CLK(t) ((STARTUP_HCLK / 1000 * (t) - 1) / 1000000) - -#define DMC_DDR_BA_EMRS 2 -#define DMC_DDR_MEM_CASLAT 3 -/* 6 Set Cas Latency to 3 */ -#define DMC_DDR_CAS_LATENCY (DDR_CASL << 1) -/* Min 0.75 ~ 1.25 */ -#define DMC_DDR_t_DQSS 1 -/* Min 2 tck */ -#define DMC_DDR_t_MRD 2 -/* 7, Min 45ns */ -#define DMC_DDR_t_RAS (NS_TO_CLK(DDR_tRAS) + 1) -/* 10, Min 67.5ns */ -#define DMC_DDR_t_RC (NS_TO_CLK(DDR_tRC) + 1) -/* 4,5(TRM), Min 22.5ns */ -#define DMC_DDR_t_RCD (NS_TO_CLK(DDR_tRCD) + 1) -#define DMC_DDR_schedule_RCD ((DMC_DDR_t_RCD - 3) << 3) -/* 11,18(TRM) Min 80ns */ -#define DMC_DDR_t_RFC (NS_TO_CLK(DDR_tRFC) + 1) -#define DMC_DDR_schedule_RFC ((DMC_DDR_t_RFC - 3) << 5) -/* 4, 5(TRM) Min 22.5ns */ -#define DMC_DDR_t_RP (NS_TO_CLK(DDR_tRP) + 1) -#define DMC_DDR_schedule_RP ((DMC_DDR_t_RP - 3) << 3) -/* 3, Min 15ns */ -#define DMC_DDR_t_RRD (NS_TO_CLK(DDR_tRRD) + 1) -/* Min 15ns */ -#define DMC_DDR_t_WR (NS_TO_CLK(DDR_tWR) + 1) -#define DMC_DDR_t_WTR 2 -/* 1tck + tIS(1.5ns) */ -#define DMC_DDR_t_XP 2 -/* 17, Min 120ns */ -#define DMC_DDR_t_XSR (NS_TO_CLK(DDR_tXSR) + 1) -#define DMC_DDR_t_ESR DMC_DDR_t_XSR -/* TRM 2656 */ -#define DMC_DDR_REFRESH_PRD (NS_TO_CLK(DDR_tREFRESH)) -/* 2b01 : mDDR */ -#define DMC_DDR_USER_CONFIG 1 - -#ifndef __ASSEMBLY__ -enum s3c64xx_uarts_nr { - S3C64XX_UART0, - S3C64XX_UART1, - S3C64XX_UART2, -}; - -#include "s3c64x0.h" - -static inline s3c64xx_uart *s3c64xx_get_base_uart(enum s3c64xx_uarts_nr nr) -{ - return (s3c64xx_uart *)(ELFIN_UART_BASE + (nr * 0x400)); -} -#endif - -#endif /*__S3C6400_H__*/ diff --git a/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h b/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h deleted file mode 100644 index 0bbf1d0..0000000 --- a/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * (C) Copyright 2003 - * David MÃŒller ELSOFT AG Switzerland. d.mueller@elsoft.ch - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : S3C64XX.h - * Version : 31.3.2003 - * - * common stuff for SAMSUNG S3C64XX SoC - ************************************************/ - -#ifndef __S3C64XX_H__ -#define __S3C64XX_H__ - -#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400) -#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration! -#endif - -#include <asm/types.h> - -/* UART (see manual chapter 11) */ -typedef struct { - volatile u32 ULCON; - volatile u32 UCON; - volatile u32 UFCON; - volatile u32 UMCON; - volatile u32 UTRSTAT; - volatile u32 UERSTAT; - volatile u32 UFSTAT; - volatile u32 UMSTAT; -#ifdef __BIG_ENDIAN - volatile u8 res1[3]; - volatile u8 UTXH; - volatile u8 res2[3]; - volatile u8 URXH; -#else /* Little Endian */ - volatile u8 UTXH; - volatile u8 res1[3]; - volatile u8 URXH; - volatile u8 res2[3]; -#endif - volatile u32 UBRDIV; -#ifdef __BIG_ENDIAN - volatile u8 res3[2]; - volatile u16 UDIVSLOT; -#else - volatile u16 UDIVSLOT; - volatile u8 res3[2]; -#endif -} s3c64xx_uart; - -/* PWM TIMER (see manual chapter 10) */ -typedef struct { - volatile u32 TCNTB; - volatile u32 TCMPB; - volatile u32 TCNTO; -} s3c64xx_timer; - -typedef struct { - volatile u32 TCFG0; - volatile u32 TCFG1; - volatile u32 TCON; - s3c64xx_timer ch[4]; - volatile u32 TCNTB4; - volatile u32 TCNTO4; -} s3c64xx_timers; - -#endif /*__S3C64XX_H__*/ diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt index ef71fea..1011c32 100644 --- a/doc/driver-model/UDM-serial.txt +++ b/doc/driver-model/UDM-serial.txt @@ -96,88 +96,84 @@ III) Analysis of in-tree drivers ------------------ No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 10) s3c64xx.c + 10) sandbox.c ------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 11) sandbox.c - ------------- - No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - - 12) serial.c + 11) serial.c ------------ This is a complementary part of NS16550 UART driver, see above.

- 13) serial_clps7111.c + 12) serial_clps7111.c --------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 14) serial_imx.c + 13) serial_imx.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. This driver might be removed in favor of serial_mxc.c .

- 15) serial_ixp.c + 14) serial_ixp.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 16) serial_ks8695.c + 15) serial_ks8695.c ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 17) serial_max3100.c + 16) serial_max3100.c -------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 18) serial_mxc.c + 17) serial_mxc.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 19) serial_netarm.c + 18) serial_netarm.c ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 20) serial_pl01x.c + 19) serial_pl01x.c ------------------ No support for CONFIG_SERIAL_MULTI. Simple conversion possible, though this driver in fact contains two drivers in total.

- 21) serial_pxa.c + 20) serial_pxa.c ---------------- This driver is a bit complicated, but due to clean support for CONFIG_SERIAL_MULTI, there are no expected obstructions throughout the conversion process.

- 22) serial_s3c24x0.c + 21) serial_s3c24x0.c -------------------- This driver, being quite ad-hoc might need some work to bring back to shape.

- 23) serial_s3c44b0.c + 22) serial_s3c44b0.c -------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 24) serial_s5p.c + 23) serial_s5p.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 25) serial_sa1100.c + 24) serial_sa1100.c ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 26) serial_sh.c + 25) serial_sh.c --------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 27) serial_xuartlite.c + 26) serial_xuartlite.c ---------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.

- 28) usbtty.c + 27) usbtty.c ------------ This driver seems very complicated and entangled with USB framework. The conversion might be complicated here.

- 29) arch/powerpc/cpu/mpc512x/serial.c + 28) arch/powerpc/cpu/mpc512x/serial.c ------------------------------------- This driver supports CONFIG_SERIAL_MULTI. This driver will need to be moved to proper place. diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index bcb7161..35769c5 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -73,7 +73,6 @@ COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o COBJS-$(CONFIG_NAND_NDFC) += ndfc.o COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o -COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_NAND_SPEAR) += spr_nand.o COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c deleted file mode 100644 index 87f0341..0000000 --- a/drivers/mtd/nand/s3c64xx.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * Implementation for U-Boot 1.1.6 by Samsung - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#include <nand.h> -#include <linux/mtd/nand.h> - -#include <asm/arch/s3c6400.h> - -#include <asm/io.h> -#include <asm/errno.h> - -#define MAX_CHIPS 2 -static int nand_cs[MAX_CHIPS] = {0, 1}; - -#ifdef CONFIG_NAND_SPL -#define printf(arg...) do {} while (0) -#endif - -/* Nand flash definition values by jsgood */ -#ifdef S3C_NAND_DEBUG -/* - * Function to print out oob buffer for debugging - * Written by jsgood - */ -static void print_oob(const char *header, struct mtd_info *mtd) -{ - int i; - struct nand_chip *chip = mtd->priv; - - printf("%s:\t", header); - - for (i = 0; i < 64; i++) - printf("%02x ", chip->oob_poi[i]); - - printf("\n"); -} -#endif /* S3C_NAND_DEBUG */ - -static void s3c_nand_select_chip(struct mtd_info *mtd, int chip) -{ - int ctrl = readl(NFCONT); - - switch (chip) { - case -1: - ctrl |= 6; - break; - case 0: - ctrl &= ~2; - break; - case 1: - ctrl &= ~4; - break; - default: - return; - } - - writel(ctrl, NFCONT); -} - -/* - * Hardware specific access to control-lines function - * Written by jsgood - */ -static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) - this->IO_ADDR_W = (void __iomem *)NFCMMD; - else if (ctrl & NAND_ALE) - this->IO_ADDR_W = (void __iomem *)NFADDR; - else - this->IO_ADDR_W = (void __iomem *)NFDATA; - if (ctrl & NAND_NCE) - s3c_nand_select_chip(mtd, *(int *)this->priv); - else - s3c_nand_select_chip(mtd, -1); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -/* - * Function for checking device ready pin - * Written by jsgood - */ -static int s3c_nand_device_ready(struct mtd_info *mtdinfo) -{ - return !!(readl(NFSTAT) & NFSTAT_RnB); -} - -#ifdef CONFIG_SYS_S3C_NAND_HWECC -/* - * This function is called before encoding ecc codes to ready ecc engine. - * Written by jsgood - */ -static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode) -{ - u_long nfcont, nfconf; - - /* - * The original driver used 4-bit ECC for "new" MLC chips, i.e., for - * those with non-zero ID[3][3:2], which anyway only holds for ST - * (Numonyx) chips - */ - nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT; - - writel(nfconf, NFCONF); - - /* Initialize & unlock */ - nfcont = readl(NFCONT); - nfcont |= NFCONT_INITECC; - nfcont &= ~NFCONT_MECCLOCK; - - if (mode == NAND_ECC_WRITE) - nfcont |= NFCONT_ECC_ENC; - else if (mode == NAND_ECC_READ) - nfcont &= ~NFCONT_ECC_ENC; - - writel(nfcont, NFCONT); -} - -/* - * This function is called immediately after encoding ecc codes. - * This function returns encoded ecc codes. - * Written by jsgood - */ -static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, - u_char *ecc_code) -{ - u_long nfcont, nfmecc0; - - /* Lock */ - nfcont = readl(NFCONT); - nfcont |= NFCONT_MECCLOCK; - writel(nfcont, NFCONT); - - nfmecc0 = readl(NFMECC0); - - ecc_code[0] = nfmecc0 & 0xff; - ecc_code[1] = (nfmecc0 >> 8) & 0xff; - ecc_code[2] = (nfmecc0 >> 16) & 0xff; - ecc_code[3] = (nfmecc0 >> 24) & 0xff; - - return 0; -} - -/* - * This function determines whether read data is good or not. - * If SLC, must write ecc codes to controller before reading status bit. - * If MLC, status bit is already set, so only reading is needed. - * If status bit is good, return 0. - * If correctable errors occured, do that. - * If uncorrectable errors occured, return -1. - * Written by jsgood - */ -static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - int ret = -1; - u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr; - u_char err_type, repaired; - - /* SLC: Write ecc to compare */ - nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0]; - nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2]; - writel(nfmeccdata0, NFMECCDATA0); - writel(nfmeccdata1, NFMECCDATA1); - - /* Read ecc status */ - nfestat0 = readl(NFESTAT0); - err_type = nfestat0 & 0x3; - - switch (err_type) { - case 0: /* No error */ - ret = 0; - break; - - case 1: - /* - * 1 bit error (Correctable) - * (nfestat0 >> 7) & 0x7ff :error byte number - * (nfestat0 >> 4) & 0x7 :error bit number - */ - err_byte_addr = (nfestat0 >> 7) & 0x7ff; - repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7)); - - printf("S3C NAND: 1 bit error detected at byte %ld. " - "Correcting from 0x%02x to 0x%02x...OK\n", - err_byte_addr, dat[err_byte_addr], repaired); - - dat[err_byte_addr] = repaired; - - ret = 1; - break; - - case 2: /* Multiple error */ - case 3: /* ECC area error */ - printf("S3C NAND: ECC uncorrectable error detected. " - "Not correctable.\n"); - ret = -1; - break; - } - - return ret; -} -#endif /* CONFIG_SYS_S3C_NAND_HWECC */ - -/* - * Board-specific NAND initialization. The following members of the - * argument are board-specific (per include/linux/mtd/nand.h): - * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device - * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device - * - hwcontrol: hardwarespecific function for accesing control-lines - * - dev_ready: hardwarespecific function for accesing device ready/busy line - * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must - * only be provided if a hardware ECC is available - * - eccmode: mode of ecc, see defines - * - chip_delay: chip dependent delay for transfering data from array to - * read regs (tR) - * - options: various chip options. They can partly be set to inform - * nand_scan about special functionality. See the defines for further - * explanation - * Members with a "?" were not set in the merged testing-NAND branch, - * so they are not set here either. - */ -int board_nand_init(struct nand_chip *nand) -{ - static int chip_n; - - if (chip_n >= MAX_CHIPS) - return -ENODEV; - - NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6; - - nand->IO_ADDR_R = (void __iomem *)NFDATA; - nand->IO_ADDR_W = (void __iomem *)NFDATA; - nand->cmd_ctrl = s3c_nand_hwcontrol; - nand->dev_ready = s3c_nand_device_ready; - nand->select_chip = s3c_nand_select_chip; - nand->options = 0; -#ifdef CONFIG_NAND_SPL - nand->read_byte = nand_read_byte; - nand->write_buf = nand_write_buf; - nand->read_buf = nand_read_buf; -#endif - -#ifdef CONFIG_SYS_S3C_NAND_HWECC - nand->ecc.hwctl = s3c_nand_enable_hwecc; - nand->ecc.calculate = s3c_nand_calculate_ecc; - nand->ecc.correct = s3c_nand_correct_data; - - /* - * If you get more than 1 NAND-chip with different page-sizes on the - * board one day, it will get more complicated... - */ - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; -#else - nand->ecc.mode = NAND_ECC_SOFT; -#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */ - - nand->priv = nand_cs + chip_n++; - - return 0; -} diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 1a7b40e..858e322 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -632,10 +632,6 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) int blockpage, found = 0; unsigned int i;

-#ifdef CONFIG_S3C64XX - return 0; -#endif - if (ONENAND_IS_2PLANE(this)) blockpage = onenand_get_2x_blockpage(mtd, addr); else diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index 0d94ea5..5eb2b3a 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -1,5 +1,5 @@ /* - * S3C64XX/S5PC100 OneNAND driver at U-Boot + * S5PC100 OneNAND driver at U-Boot * * Copyright (C) 2008-2009 Samsung Electronics * Kyungmin Park kyungmin.park@samsung.com @@ -62,12 +62,7 @@ do { \ #define ONENAND_MAIN_SPARE_ACCESS 0x16 #define ONENAND_PIPELINE_READ 0x4000

-#if defined(CONFIG_S3C64XX) -#define MAP_00 (0x0 << 24) -#define MAP_01 (0x1 << 24) -#define MAP_10 (0x2 << 24) -#define MAP_11 (0x3 << 24) -#elif defined(CONFIG_S5P) +#if defined(CONFIG_S5P) #define MAP_00 (0x0 << 26) #define MAP_01 (0x1 << 26) #define MAP_10 (0x2 << 26) @@ -116,12 +111,7 @@ static void s3c_write_cmd(int value, unsigned int cmd) * return the buffer address on the memory device * It will be combined with CMD_MAP_XX */ -#if defined(CONFIG_S3C64XX) -static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) -{ - return (fba << 12) | (fpa << 6) | (fsa << 4); -} -#elif defined(CONFIG_S5P) +#if defined(CONFIG_S5P) static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) { return (fba << 13) | (fpa << 7) | (fsa << 5); @@ -550,45 +540,6 @@ static void s3c_onenand_unlock_all(struct mtd_info *mtd) s3c_onenand_check_lock_status(mtd); }

-#ifdef CONFIG_S3C64XX -static void s3c_set_width_regs(struct onenand_chip *this) -{ - int dev_id, density; - int fba, fpa, fsa; - int dbs_dfs; - - dev_id = DEVICE_ID0_REG; - - density = (dev_id >> ONENAND_DEVICE_DENSITY_SHIFT) & 0xf; - dbs_dfs = !!(dev_id & ONENAND_DEVICE_IS_DDP); - - fba = density + 7; - if (dbs_dfs) - fba--; /* Decrease the fba */ - fpa = 6; - if (density >= ONENAND_DEVICE_DENSITY_512Mb) - fsa = 2; - else - fsa = 1; - - DPRINTK("FBA %lu, FPA %lu, FSA %lu, DDP %lu", - FBA_WIDTH0_REG, FPA_WIDTH0_REG, FSA_WIDTH0_REG, - DDP_DEVICE_REG); - - DPRINTK("mem_cfg0 0x%lx, sync mode %lu, " - "dev_page_size %lu, BURST LEN %lu", - MEM_CFG0_REG, SYNC_MODE_REG, - DEV_PAGE_SIZE_REG, BURST_LEN0_REG); - - DEV_PAGE_SIZE_REG = 0x1; - - FBA_WIDTH0_REG = fba; - FPA_WIDTH0_REG = fpa; - FSA_WIDTH0_REG = fsa; - DBS_DFS_WIDTH0_REG = dbs_dfs; -} -#endif - int s5pc110_chip_probe(struct mtd_info *mtd) { return 0; @@ -620,10 +571,7 @@ void s3c_onenand_init(struct mtd_info *mtd)

onenand->mtd = mtd;

-#if defined(CONFIG_S3C64XX) - onenand->base = (void *)0x70100000; - onenand->ahb_addr = (void *)0x20000000; -#elif defined(CONFIG_S5P) +#if defined(CONFIG_S5P) onenand->base = (void *)0xE7100000; onenand->ahb_addr = (void *)0xB0000000; #endif diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index de3f471..fbc4e97 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -35,7 +35,6 @@ COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o -COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_S5P) += serial_s5p.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c deleted file mode 100644 index b590992..0000000 --- a/drivers/serial/s3c64xx.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, lg@denx.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <linux/compiler.h> -#include <serial.h> -#include <asm/arch/s3c6400.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SERIAL1 -#define UART_NR S3C64XX_UART0 - -#elif defined(CONFIG_SERIAL2) -#define UART_NR S3C64XX_UART1 - -#elif defined(CONFIG_SERIAL3) -#define UART_NR S3C64XX_UART2 - -#else -#error "Bad: you didn't configure serial ..." -#endif - -/* - * The coefficient, used to calculate the baudrate on S3C6400 UARTs is - * calculated as - * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT - * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1, - * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants: - */ -static const int udivslot[] = { - 0, - 0x0080, - 0x0808, - 0x0888, - 0x2222, - 0x4924, - 0x4a52, - 0x54aa, - 0x5555, - 0xd555, - 0xd5d5, - 0xddd5, - 0xdddd, - 0xdfdd, - 0xdfdf, - 0xffdf, -}; - -static void s3c64xx_serial_setbrg(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - u32 pclk = get_PCLK(); - u32 baudrate = gd->baudrate; - int i; - - i = (pclk / baudrate) % 16; - - uart->UBRDIV = pclk / baudrate / 16 - 1; - uart->UDIVSLOT = udivslot[i]; - - for (i = 0; i < 100; i++) - barrier(); -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static int s3c64xx_serial_init(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - - /* reset and enable FIFOs, set triggers to the maximum */ - uart->UFCON = 0xff; - uart->UMCON = 0; - /* 8N1 */ - uart->ULCON = 3; - /* No interrupts, no DMA, pure polling */ - uart->UCON = 5; - - serial_setbrg(); - - return 0; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int s3c64xx_serial_getc(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - - /* wait for character to arrive */ - while (!(uart->UTRSTAT & 0x1)); - - return uart->URXH & 0xff; -} - -#ifdef CONFIG_MODEM_SUPPORT -static int be_quiet; -void disable_putc(void) -{ - be_quiet = 1; -} - -void enable_putc(void) -{ - be_quiet = 0; -} -#endif - - -/* - * Output a single byte to the serial port. - */ -static void s3c64xx_serial_putc(const char c) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - -#ifdef CONFIG_MODEM_SUPPORT - if (be_quiet) - return; -#endif - - /* wait for room in the tx FIFO */ - while (!(uart->UTRSTAT & 0x2)); - - uart->UTXH = c; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc('\r'); -} - -/* - * Test whether a character is in the RX buffer - */ -static int s3c64xx_serial_tstc(void) -{ - s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); - - return uart->UTRSTAT & 0x1; -} - -static struct serial_device s3c64xx_serial_drv = { - .name = "s3c64xx_serial", - .start = s3c64xx_serial_init, - .stop = NULL, - .setbrg = s3c64xx_serial_setbrg, - .putc = s3c64xx_serial_putc, - .puts = default_serial_puts, - .getc = s3c64xx_serial_getc, - .tstc = s3c64xx_serial_tstc, -}; - -void s3c64xx_serial_initialize(void) -{ - serial_register(&s3c64xx_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &s3c64xx_serial_drv; -} diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 7922bf0..9f04643 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -165,7 +165,6 @@ serial_initfunc(atmel_serial_initialize); serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); serial_initfunc(oc_serial_initialize); -serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); serial_initfunc(clps7111_serial_initialize); serial_initfunc(imx_serial_initialize); @@ -259,7 +258,6 @@ void serial_initialize(void) lpc32xx_serial_initialize(); mcf_serial_initialize(); oc_serial_initialize(); - s3c64xx_serial_initialize(); sandbox_serial_initialize(); clps7111_serial_initialize(); imx_serial_initialize(); diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 9a6f982..87a5970 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -31,7 +31,6 @@ COBJS-$(CONFIG_USB_ATMEL) += ohci-at91.o COBJS-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o -COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o COBJS-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index bdbe250..bc17b85 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -66,7 +66,6 @@

#if defined(CONFIG_ARM920T) || \ defined(CONFIG_S3C24X0) || \ - defined(CONFIG_S3C6400) || \ defined(CONFIG_440EP) || \ defined(CONFIG_PCI_OHCI) || \ defined(CONFIG_MPC5200) || \ diff --git a/drivers/usb/host/s3c64xx-hcd.c b/drivers/usb/host/s3c64xx-hcd.c deleted file mode 100644 index cd295da..0000000 --- a/drivers/usb/host/s3c64xx-hcd.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * URB OHCI HCD (Host Controller Driver) initialization for USB on the S3C64XX. - * - * Copyright (C) 2008, - * Guennadi Liakhovetski, DENX Software Engineering lg@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/arch/s3c6400.h> - -int usb_cpu_init(void) -{ - OTHERS_REG |= 0x10000; - return 0; -} - -int usb_cpu_stop(void) -{ - OTHERS_REG &= ~0x10000; - return 0; -} - -void usb_cpu_init_fail(void) -{ - OTHERS_REG &= ~0x10000; -} diff --git a/include/common.h b/include/common.h index 604176c..0cfa6a8 100644 --- a/include/common.h +++ b/include/common.h @@ -647,7 +647,6 @@ ulong get_PCI_freq (void); #endif #if defined(CONFIG_S3C24X0) || \ defined(CONFIG_LH7A40X) || \ - defined(CONFIG_S3C6400) || \ defined(CONFIG_EP93XX) ulong get_FCLK (void); ulong get_HCLK (void); diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h index f321d8a..fd01040 100644 --- a/include/onenand_uboot.h +++ b/include/onenand_uboot.h @@ -48,10 +48,6 @@ extern int flexonenand_region(struct mtd_info *mtd, loff_t addr); extern int flexonenand_set_boundary(struct mtd_info *mtd, int die, int boundary, int lock);

-/* S3C64xx */ -extern void s3c64xx_onenand_init(struct mtd_info *); -extern void s3c64xx_set_width_regs(struct onenand_chip *); - /* SPL */ void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst);

Following the removal of the smdk6400 board, the MMU setup code in arm1176/start.S becomes unused, so remove it. It will still be possible to restore it later from the Git history if necessary, in which case it should be moved out of the relocate_code() function.

Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v10: None Changes in v9: - Do not use "scrapyard" in patch description because this is reserved to refer to the board scrapyard file.

Changes in v8: - New patch.

Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None

arch/arm/cpu/arm1176/start.S | 91 +----------------------------------------- 1 file changed, 1 insertion(+), 90 deletions(-)

diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index a7cf728..1fc1da0 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -33,11 +33,8 @@ #include <asm-offsets.h> #include <config.h> #include <version.h> -#ifdef CONFIG_ENABLE_MMU -#include <asm/proc/domain.h> -#endif

-#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE) +#ifndef CONFIG_SYS_PHY_UBOOT_BASE #define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE #endif

@@ -105,14 +102,6 @@ _TEXT_BASE: #endif

/* - * Below variable is very important because we use MMU in U-Boot. - * Without it, we cannot run code correctly before MMU is ON. - * by scsuh. - */ -_TEXT_PHY_BASE: - .word CONFIG_SYS_PHY_UBOOT_BASE - -/* * These are defined in the board-specific linker script. * Subtracting _start from them lets the linker put their * relative position in the executable instead of leaving @@ -298,44 +287,6 @@ fixnext: blo fixloop #endif

-#ifdef CONFIG_ENABLE_MMU -enable_mmu: - /* enable domain access */ - ldr r5, =0x0000ffff - mcr p15, 0, r5, c3, c0, 0 /* load domain access register */ - - /* Set the TTB register */ - ldr r0, _mmu_table_base - ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE - ldr r2, =0xfff00000 - bic r0, r0, r2 - orr r1, r0, r1 - mcr p15, 0, r1, c2, c0, 0 - - /* Enable the MMU */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #1 /* Set CR_M to enable MMU */ - - /* Prepare to enable the MMU */ - adr r1, skip_hw_init - and r1, r1, #0x3fc - ldr r2, _TEXT_BASE - ldr r3, =0xfff00000 - and r2, r2, r3 - orr r2, r2, r1 - b mmu_enable - - .align 5 - /* Run in a single cache-line */ -mmu_enable: - - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -skip_hw_init: -#endif - relocate_done:

bx lr @@ -347,11 +298,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start

-#ifdef CONFIG_ENABLE_MMU -_mmu_table_base: - .word mmu_table -#endif - .globl c_runtime_cpu_setup c_runtime_cpu_setup:

@@ -359,41 +305,6 @@ c_runtime_cpu_setup:

#ifndef CONFIG_SPL_BUILD /* - * we assume that cache operation is done before. (eg. cleanup_before_linux()) - * actually, we don't need to do anything about cache if not use d-cache in - * U-Boot. So, in this function we clean only MMU. by scsuh - * - * void theLastJump(void *kernel, int arch_num, uint boot_params); - */ -#ifdef CONFIG_ENABLE_MMU - .globl theLastJump -theLastJump: - mov r9, r0 - ldr r3, =0xfff00000 - ldr r4, _TEXT_PHY_BASE - adr r5, phy_last_jump - bic r5, r5, r3 - orr r5, r5, r4 - mov pc, r5 -phy_last_jump: - /* - * disable MMU stuff - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ - bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ - orr r0, r0, #0x00000002 /* set bit 2 (A) Align */ - orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ - mcr p15, 0, r0, c1, c0, 0 - - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - mov r0, #0 - mov pc, r9 -#endif - - -/* ************************************************************************* * * Interrupt handling