[PATCH 1/2] arm: mach-k3: Only build init files for SPL
The content of these files are only used in SPL builds. The contents are already ifdef for the same, remove that and only include the whole file in the build when building for SPL.
Signed-off-by: Andrew Davis afd@ti.com --- arch/arm/mach-k3/Makefile | 13 ++++++++----- arch/arm/mach-k3/am625_init.c | 4 ---- arch/arm/mach-k3/am642_init.c | 2 -- arch/arm/mach-k3/am6_init.c | 2 -- arch/arm/mach-k3/j721e_init.c | 2 -- arch/arm/mach-k3/j721s2_init.c | 3 --- 6 files changed, 8 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile index 8459bef93b..e17ad22141 100644 --- a/arch/arm/mach-k3/Makefile +++ b/arch/arm/mach-k3/Makefile @@ -3,16 +3,19 @@ # Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ # Lokesh Vutla lokeshvutla@ti.com
-obj-$(CONFIG_SOC_K3_AM6) += am6_init.o -obj-$(CONFIG_SOC_K3_J721E) += j721e_init.o j721e/ j7200/ -obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o j721s2/ -obj-$(CONFIG_SOC_K3_AM642) += am642_init.o -obj-$(CONFIG_SOC_K3_AM625) += am625_init.o am62x/ +obj-$(CONFIG_SOC_K3_J721E) += j721e/ j7200/ +obj-$(CONFIG_SOC_K3_J721S2) += j721s2/ +obj-$(CONFIG_SOC_K3_AM625) += am62x/ obj-$(CONFIG_ARM64) += arm64-mmu.o obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o obj-$(CONFIG_TI_SECURE_DEVICE) += security.o obj-$(CONFIG_ARM64) += cache.o ifeq ($(CONFIG_SPL_BUILD),y) +obj-$(CONFIG_SOC_K3_AM6) += am6_init.o +obj-$(CONFIG_SOC_K3_J721E) += j721e_init.o +obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o +obj-$(CONFIG_SOC_K3_AM642) += am642_init.o +obj-$(CONFIG_SOC_K3_AM625) += am625_init.o obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o endif obj-y += common.o diff --git a/arch/arm/mach-k3/am625_init.c b/arch/arm/mach-k3/am625_init.c index 0d9525992b..25b68e057f 100644 --- a/arch/arm/mach-k3/am625_init.c +++ b/arch/arm/mach-k3/am625_init.c @@ -15,8 +15,6 @@ #include <dm/uclass-internal.h> #include <dm/pinctrl.h>
-#if defined(CONFIG_SPL_BUILD) - /* * This uninitialized global variable would normal end up in the .bss section, * but the .bss is cleared between writing and reading this variable, so move @@ -267,5 +265,3 @@ u32 spl_boot_device(void)
return bootmedia; } - -#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c index b16de9c9f0..8428322ed9 100644 --- a/arch/arm/mach-k3/am642_init.c +++ b/arch/arm/mach-k3/am642_init.c @@ -23,7 +23,6 @@ #include <mmc.h> #include <dm/root.h>
-#if defined(CONFIG_SPL_BUILD) #define MCU_CTRL_MMR0_BASE 0x04500000 #define CTRLMMR_MCU_RST_CTRL 0x04518170
@@ -348,7 +347,6 @@ u32 spl_boot_device(void) else return __get_backup_bootmedia(devstat); } -#endif
#if defined(CONFIG_SYS_K3_SPL_ATF)
diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index 7992918adc..6e833a6641 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -26,7 +26,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SPL_BUILD #ifdef CONFIG_K3_LOAD_SYSFW #ifdef CONFIG_TI_SECURE_DEVICE struct fwl_data main_cbass_fwls[] = { @@ -359,7 +358,6 @@ u32 spl_boot_device(void) else return __get_backup_bootmedia(devstat); } -#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index e56ca6d0f5..cb9f7eebec 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -24,7 +24,6 @@ #include <mmc.h> #include <remoteproc.h>
-#ifdef CONFIG_SPL_BUILD #ifdef CONFIG_K3_LOAD_SYSFW #ifdef CONFIG_TI_SECURE_DEVICE struct fwl_data cbass_hc_cfg0_fwls[] = { @@ -384,7 +383,6 @@ u32 spl_boot_device(void) else return __get_backup_bootmedia(main_devstat); } -#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
diff --git a/arch/arm/mach-k3/j721s2_init.c b/arch/arm/mach-k3/j721s2_init.c index 2e64e44a80..12da8136f9 100644 --- a/arch/arm/mach-k3/j721s2_init.c +++ b/arch/arm/mach-k3/j721s2_init.c @@ -22,8 +22,6 @@ #include <mmc.h> #include <remoteproc.h>
-#ifdef CONFIG_SPL_BUILD - static void ctrl_mmr_unlock(void) { /* Unlock all WKUP_CTRL_MMR0 module registers */ @@ -255,7 +253,6 @@ u32 spl_boot_device(void) else return __get_backup_bootmedia(main_devstat); } -#endif
#define J721S2_DEV_MCU_RTI0 295 #define J721S2_DEV_MCU_RTI1 296
The first AM6x device was the AM654x, but being the first we named it just AM6, since more devices have come out with this same prefix we should switch it to the normal convention of using the full name of the first compatibility device the series. This makes what device we are talking about more clear and matches all the K3 devices added since.
Signed-off-by: Andrew Davis afd@ti.com --- arch/arm/dts/Makefile | 2 +- arch/arm/mach-k3/Kconfig | 14 +++++++------- arch/arm/mach-k3/Makefile | 2 +- arch/arm/mach-k3/{am6_init.c => am654_init.c} | 0 arch/arm/mach-k3/arm64-mmu.c | 4 ++-- arch/arm/mach-k3/include/mach/hardware.h | 2 +- arch/arm/mach-k3/include/mach/spl.h | 2 +- board/siemens/iot2050/Kconfig | 2 +- board/ti/am65x/Kconfig | 4 ++-- configs/am65x_evm_a53_defconfig | 2 +- configs/am65x_evm_r5_defconfig | 2 +- configs/am65x_evm_r5_usbdfu_defconfig | 2 +- configs/am65x_evm_r5_usbmsc_defconfig | 2 +- configs/am65x_hs_evm_a53_defconfig | 2 +- configs/am65x_hs_evm_r5_defconfig | 2 +- configs/iot2050_defconfig | 2 +- drivers/dma/ti/Makefile | 2 +- drivers/dma/ti/k3-psil.c | 2 +- drivers/ram/Kconfig | 2 +- 19 files changed, 26 insertions(+), 26 deletions(-) rename arch/arm/mach-k3/{am6_init.c => am654_init.c} (100%)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 66c719908c..ea6f54b9b7 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1192,7 +1192,7 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp15xx-dhcor-avenger96.dtb \ stm32mp15xx-dhcor-drc-compact.dtb
-dtb-$(CONFIG_SOC_K3_AM6) += \ +dtb-$(CONFIG_SOC_K3_AM654) += \ k3-am654-base-board.dtb \ k3-am654-r5-base-board.dtb \ k3-am65-iot2050-spl.dtb \ diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 57f693e9a1..0d21f26275 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -4,8 +4,8 @@ choice prompt "Texas Instruments' K3 based SoC select" optional
-config SOC_K3_AM6 - bool "TI's K3 based AM6 SoC Family Support" +config SOC_K3_AM654 + bool "TI's K3 based AM654 SoC Family Support"
config SOC_K3_J721E bool "TI's K3 based J721E SoC Family Support" @@ -26,7 +26,7 @@ config SYS_SOC
config SYS_K3_NON_SECURE_MSRAM_SIZE hex - default 0x80000 if SOC_K3_AM6 + default 0x80000 if SOC_K3_AM654 default 0x100000 if SOC_K3_J721E || SOC_K3_J721S2 default 0x1c0000 if SOC_K3_AM642 default 0x3c000 if SOC_K3_AM625 @@ -38,7 +38,7 @@ config SYS_K3_NON_SECURE_MSRAM_SIZE
config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE hex - default 0x58000 if SOC_K3_AM6 + default 0x58000 if SOC_K3_AM654 default 0xc0000 if SOC_K3_J721E || SOC_K3_J721S2 default 0x180000 if SOC_K3_AM642 default 0x38000 if SOC_K3_AM625 @@ -48,21 +48,21 @@ config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
config SYS_K3_MCU_SCRATCHPAD_BASE hex - default 0x40280000 if SOC_K3_AM6 + default 0x40280000 if SOC_K3_AM654 default 0x40280000 if SOC_K3_J721E || SOC_K3_J721S2 help Describes the base address of MCU Scratchpad RAM.
config SYS_K3_MCU_SCRATCHPAD_SIZE hex - default 0x200 if SOC_K3_AM6 + default 0x200 if SOC_K3_AM654 default 0x200 if SOC_K3_J721E || SOC_K3_J721S2 help Describes the size of MCU Scratchpad RAM.
config SYS_K3_BOOT_PARAM_TABLE_INDEX hex - default 0x41c7fbfc if SOC_K3_AM6 + default 0x41c7fbfc if SOC_K3_AM654 default 0x41cffbfc if SOC_K3_J721E default 0x41cfdbfc if SOC_K3_J721S2 default 0x701bebfc if SOC_K3_AM642 diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile index e17ad22141..0dce8802db 100644 --- a/arch/arm/mach-k3/Makefile +++ b/arch/arm/mach-k3/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o obj-$(CONFIG_TI_SECURE_DEVICE) += security.o obj-$(CONFIG_ARM64) += cache.o ifeq ($(CONFIG_SPL_BUILD),y) -obj-$(CONFIG_SOC_K3_AM6) += am6_init.o +obj-$(CONFIG_SOC_K3_AM654) += am654_init.o obj-$(CONFIG_SOC_K3_J721E) += j721e_init.o obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o obj-$(CONFIG_SOC_K3_AM642) += am642_init.o diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am654_init.c similarity index 100% rename from arch/arm/mach-k3/am6_init.c rename to arch/arm/mach-k3/am654_init.c diff --git a/arch/arm/mach-k3/arm64-mmu.c b/arch/arm/mach-k3/arm64-mmu.c index 12cb89335a..7e251b7ec8 100644 --- a/arch/arm/mach-k3/arm64-mmu.c +++ b/arch/arm/mach-k3/arm64-mmu.c @@ -13,7 +13,7 @@ #include <asm/system.h> #include <asm/armv8/mmu.h>
-#ifdef CONFIG_SOC_K3_AM6 +#ifdef CONFIG_SOC_K3_AM654 /* NR_DRAM_BANKS + 32bit IO + 64bit IO + terminator */ #define NR_MMU_REGIONS (CONFIG_NR_DRAM_BANKS + 5)
@@ -64,7 +64,7 @@ struct mm_region am654_mem_map[NR_MMU_REGIONS] = { };
struct mm_region *mem_map = am654_mem_map; -#endif /* CONFIG_SOC_K3_AM6 */ +#endif /* CONFIG_SOC_K3_AM654 */
#ifdef CONFIG_SOC_K3_J721E
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h index 7c6928d5da..7bbd5c22c9 100644 --- a/arch/arm/mach-k3/include/mach/hardware.h +++ b/arch/arm/mach-k3/include/mach/hardware.h @@ -6,7 +6,7 @@ #ifndef _ASM_ARCH_HARDWARE_H_ #define _ASM_ARCH_HARDWARE_H_
-#ifdef CONFIG_SOC_K3_AM6 +#ifdef CONFIG_SOC_K3_AM654 #include "am6_hardware.h" #endif
diff --git a/arch/arm/mach-k3/include/mach/spl.h b/arch/arm/mach-k3/include/mach/spl.h index 17996f2938..c9a324a5f0 100644 --- a/arch/arm/mach-k3/include/mach/spl.h +++ b/arch/arm/mach-k3/include/mach/spl.h @@ -6,7 +6,7 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_
-#ifdef CONFIG_SOC_K3_AM6 +#ifdef CONFIG_SOC_K3_AM654 #include "am6_spl.h" #endif
diff --git a/board/siemens/iot2050/Kconfig b/board/siemens/iot2050/Kconfig index 8f634c172c..063142a43b 100644 --- a/board/siemens/iot2050/Kconfig +++ b/board/siemens/iot2050/Kconfig @@ -9,7 +9,7 @@ config TARGET_IOT2050_A53 bool "IOT2050 running on A53" select ARM64 - select SOC_K3_AM6 + select SOC_K3_AM654 select BOARD_LATE_INIT select SYS_DISABLE_DCACHE_OPS select BINMAN diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig index 16a7476d9c..4765b13ba0 100644 --- a/board/ti/am65x/Kconfig +++ b/board/ti/am65x/Kconfig @@ -10,7 +10,7 @@ choice config TARGET_AM654_A53_EVM bool "TI K3 based AM654 EVM running on A53" select ARM64 - select SOC_K3_AM6 + select SOC_K3_AM654 select SYS_DISABLE_DCACHE_OPS select BOARD_LATE_INIT imply TI_I2C_BOARD_DETECT @@ -19,7 +19,7 @@ config TARGET_AM654_R5_EVM bool "TI K3 based AM654 EVM running on R5" select CPU_V7R select SYS_THUMB_BUILD - select SOC_K3_AM6 + select SOC_K3_AM654 select K3_LOAD_SYSFW select K3_AM654_DDRSS imply SYS_K3_SPL_ATF diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig index 65e41e5b6a..087909fe39 100644 --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@ -6,7 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_AM6=y +CONFIG_SOC_K3_AM654=y CONFIG_TARGET_AM654_A53_EVM=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x680000 diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig index 5232b97970..7622495b5f 100644 --- a/configs/am65x_evm_r5_defconfig +++ b/configs/am65x_evm_r5_defconfig @@ -6,7 +6,7 @@ CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_AM6=y +CONFIG_SOC_K3_AM654=y CONFIG_K3_EARLY_CONS=y CONFIG_TARGET_AM654_R5_EVM=y CONFIG_ENV_SIZE=0x20000 diff --git a/configs/am65x_evm_r5_usbdfu_defconfig b/configs/am65x_evm_r5_usbdfu_defconfig index 7507128c11..65da33052c 100644 --- a/configs/am65x_evm_r5_usbdfu_defconfig +++ b/configs/am65x_evm_r5_usbdfu_defconfig @@ -6,7 +6,7 @@ CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_AM6=y +CONFIG_SOC_K3_AM654=y CONFIG_K3_EARLY_CONS=y CONFIG_TARGET_AM654_R5_EVM=y CONFIG_ENV_SIZE=0x20000 diff --git a/configs/am65x_evm_r5_usbmsc_defconfig b/configs/am65x_evm_r5_usbmsc_defconfig index e7e2226473..641daa6353 100644 --- a/configs/am65x_evm_r5_usbmsc_defconfig +++ b/configs/am65x_evm_r5_usbmsc_defconfig @@ -6,7 +6,7 @@ CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_AM6=y +CONFIG_SOC_K3_AM654=y CONFIG_K3_EARLY_CONS=y CONFIG_TARGET_AM654_R5_EVM=y CONFIG_ENV_SIZE=0x20000 diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig index 3ce290467a..1b3b25b2cb 100644 --- a/configs/am65x_hs_evm_a53_defconfig +++ b/configs/am65x_hs_evm_a53_defconfig @@ -7,7 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_AM6=y +CONFIG_SOC_K3_AM654=y CONFIG_TARGET_AM654_A53_EVM=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x680000 diff --git a/configs/am65x_hs_evm_r5_defconfig b/configs/am65x_hs_evm_r5_defconfig index 6e63f0e880..d3a0420b1c 100644 --- a/configs/am65x_hs_evm_r5_defconfig +++ b/configs/am65x_hs_evm_r5_defconfig @@ -7,7 +7,7 @@ CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_AM6=y +CONFIG_SOC_K3_AM654=y CONFIG_K3_EARLY_CONS=y CONFIG_TARGET_AM654_R5_EVM=y CONFIG_ENV_SIZE=0x20000 diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig index b50b5d0938..203748100a 100644 --- a/configs/iot2050_defconfig +++ b/configs/iot2050_defconfig @@ -7,7 +7,7 @@ CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_AM6=y +CONFIG_SOC_K3_AM654=y CONFIG_TARGET_IOT2050_A53=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x680000 diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile index 56f348700d..6807eb8e8b 100644 --- a/drivers/dma/ti/Makefile +++ b/drivers/dma/ti/Makefile @@ -3,7 +3,7 @@ obj-$(CONFIG_TI_K3_NAVSS_UDMA) += k3-udma.o obj-$(CONFIG_TI_K3_PSIL) += k3-psil-data.o k3-psil-data-y += k3-psil.o -k3-psil-data-$(CONFIG_SOC_K3_AM6) += k3-psil-am654.o +k3-psil-data-$(CONFIG_SOC_K3_AM654) += k3-psil-am654.o k3-psil-data-$(CONFIG_SOC_K3_J721E) += k3-psil-j721e.o k3-psil-data-$(CONFIG_SOC_K3_J721S2) += k3-psil-j721s2.o k3-psil-data-$(CONFIG_SOC_K3_AM642) += k3-psil-am64.o diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c index f1330bf4b0..f23c8ca2b7 100644 --- a/drivers/dma/ti/k3-psil.c +++ b/drivers/dma/ti/k3-psil.c @@ -16,7 +16,7 @@ struct psil_endpoint_config *psil_get_ep_config(u32 thread_id) int i;
if (!soc_ep_map) { - if (IS_ENABLED(CONFIG_SOC_K3_AM6)) + if (IS_ENABLED(CONFIG_SOC_K3_AM654)) soc_ep_map = &am654_ep_map; else if (IS_ENABLED(CONFIG_SOC_K3_J721E)) soc_ep_map = &j721e_ep_map; diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index 7c346180ba..86857c0627 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -45,7 +45,7 @@ config MPC83XX_SDRAM
config K3_AM654_DDRSS bool "Enable AM654 DDRSS support" - depends on RAM && SOC_K3_AM6 + depends on RAM && SOC_K3_AM654 help K3 based AM654 devices has DDR memory subsystem that comprises Synopys DDR controller, Synopsis DDR phy and wrapper logic to
On Fri, Jul 15, 2022 at 10:25:27AM -0500, Andrew Davis wrote:
The first AM6x device was the AM654x, but being the first we named it just AM6, since more devices have come out with this same prefix we should switch it to the normal convention of using the full name of the first compatibility device the series. This makes what device we are talking about more clear and matches all the K3 devices added since.
Signed-off-by: Andrew Davis afd@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
On Fri, Jul 15, 2022 at 10:25:27AM -0500, Andrew Davis wrote:
The first AM6x device was the AM654x, but being the first we named it just AM6, since more devices have come out with this same prefix we should switch it to the normal convention of using the full name of the first compatibility device the series. This makes what device we are talking about more clear and matches all the K3 devices added since.
Signed-off-by: Andrew Davis afd@ti.com Reviewed-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
On Fri, Jul 15, 2022 at 10:25:26AM -0500, Andrew Davis wrote:
The content of these files are only used in SPL builds. The contents are already ifdef for the same, remove that and only include the whole file in the build when building for SPL.
Signed-off-by: Andrew Davis afd@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
On Fri, Jul 15, 2022 at 10:25:26AM -0500, Andrew Davis wrote:
The content of these files are only used in SPL builds. The contents are already ifdef for the same, remove that and only include the whole file in the build when building for SPL.
Signed-off-by: Andrew Davis afd@ti.com Reviewed-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
participants (2)
-
Andrew Davis -
Tom Rini