Unable to select a different ENV location due env_get_location on zynqmp
Hi Michal,
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH; + if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) + return ENVL_FAT; + if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) + return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:
A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Thanks,
Hi,
On 2/14/22 21:10, Ricardo Salveti wrote:
Hi Michal,
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH;
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))return ENVL_FAT;if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup. And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
Thanks, Michal
Hi,
On 15.02.2022 08:41, Michal Simek wrote:
On 2/14/22 21:10, Ricardo Salveti wrote:
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH; + if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) + return ENVL_FAT; + if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) + return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:
A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup. And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
I'm not very familiar with U-Boot & iMX but I actually started working on DT binding for U-Boot env.
Please check: [PATCH V2 2/3] dt-bindings: nvmem: add U-Boot environment variables binding https://patchwork.ozlabs.org/project/devicetree-bindings/patch/2021123009044...
I received feedback from Rob on January and I'm working on next version of my patch this very moment. I'll cc U-Boot this time obviously.
On 15/02/22, Michal Simek wrote:
Hi,
On 2/14/22 21:10, Ricardo Salveti wrote:
Hi Michal,
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH;
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))return ENVL_FAT;if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup.
I disagree. I see no actual need to hardcode the environment location the way it is done. It serves no purpose.
And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
are you saying that unless you have a DT change you wont let the user choose where the place the environment?
if so, I'd like to undestand why. As I said, it seems biased and unreasoanble hence why I think it deserves further justification.
Thanks, Michal
Hi,
On 2/15/22 14:27, Jorge Ramirez-Ortiz, Foundries wrote:
On 15/02/22, Michal Simek wrote:
Hi,
On 2/14/22 21:10, Ricardo Salveti wrote:
Hi Michal,
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH;
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))return ENVL_FAT;if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup.
I disagree. I see no actual need to hardcode the environment location the way it is done. It serves no purpose.
And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
are you saying that unless you have a DT change you wont let the user choose where the place the environment?
I am not saying that. I have really not a problem to disable this code under any Kconfig option that user have option to disable it. But I want to have it enabled by default.
And DT changes are pretty much the way what I think is the right way for enabling multiple locations where vars can be stored.
Thanks, Michal
On 2/15/22 8:54 AM, Michal Simek wrote:
Hi,
On 2/15/22 14:27, Jorge Ramirez-Ortiz, Foundries wrote:
On 15/02/22, Michal Simek wrote:
Hi,
On 2/14/22 21:10, Ricardo Salveti wrote:
Hi Michal,
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH; + if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) + return ENVL_FAT; + if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) + return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:
A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup.
I disagree. I see no actual need to hardcode the environment location the way it is done. It serves no purpose.
And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
are you saying that unless you have a DT change you wont let the user choose where the place the environment?
I am not saying that. I have really not a problem to disable this code under any Kconfig option that user have option to disable it. But I want to have it enabled by default.
And DT changes are pretty much the way what I think is the right way for enabling multiple locations where vars can be stored.
Couldn't this just be extended? E.g. exactly the way Ricardo described:
case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH;
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))return ENVL_FAT;if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))return ENVL_EXT4; return ENVL_NOWHERE;
Here the first priority is SPI, then FAT, then EXT4. The default is sane, but there are still backup locations.
--Sean
On 2/15/22 16:02, Sean Anderson wrote:
On 2/15/22 8:54 AM, Michal Simek wrote:
Hi,
On 2/15/22 14:27, Jorge Ramirez-Ortiz, Foundries wrote:
On 15/02/22, Michal Simek wrote:
Hi,
On 2/14/22 21:10, Ricardo Salveti wrote:
Hi Michal,
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH; + if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) + return ENVL_FAT; + if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) + return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:
A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup.
I disagree. I see no actual need to hardcode the environment location the way it is done. It serves no purpose.
> >
And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
are you saying that unless you have a DT change you wont let the user choose where the place the environment?
I am not saying that. I have really not a problem to disable this code under any Kconfig option that user have option to disable it. But I want to have it enabled by default.
And DT changes are pretty much the way what I think is the right way for enabling multiple locations where vars can be stored.
Couldn't this just be extended? E.g. exactly the way Ricardo described:
I am not quite sure I am following you how you want to extend it. Definitely send a patch I will take a look.
case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH; + if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) + return ENVL_FAT; + if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) + return ENVL_EXT4; return ENVL_NOWHERE;
Here the first priority is SPI, then FAT, then EXT4. The default is sane, but there are still backup locations.
IIRC backup locations have own offset or values which are saying where they are stored. It means you can tune it to way you like. And as above I am ok with Kconfig option not to call this function at all. Then you can select options via Kconfig based on product you target.
Thanks, Michal
On Tue, Feb 15, 2022 at 12:39 PM Michal Simek michal.simek@xilinx.com wrote:
On 2/15/22 16:02, Sean Anderson wrote:
On 2/15/22 8:54 AM, Michal Simek wrote:
Hi,
On 2/15/22 14:27, Jorge Ramirez-Ortiz, Foundries wrote:
On 15/02/22, Michal Simek wrote:
Hi,
On 2/14/22 21:10, Ricardo Salveti wrote:
Hi Michal,
This is a bit similar to the issue raised on iMX8-based targets a few days ago, which is forcing the environment location based on the boot mode and not allowing the user to use a different option via other CONFIG options.
Should we really force the env location based on boot mode? Currently there is no way to boot out of QSPI and save the environment on emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env location to be set as ENVL_NOWHERE, which is not ideal, especially when other env target locations are available at build time.
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index f0be9c022a7..08afb49570a 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -969,6 +969,10 @@ enum env_location env_get_location(enum env_operation op, int prio) case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH;
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))return ENVL_FAT;if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))return ENVL_EXT4; return ENVL_NOWHERE; case JTAG_MODE: default:A change like this one would allow other locations to be set, and just use the boot mode to assign the priority instead.
Since I couldn't really find out what is the expected behavior on functions defined at soc/board level (env.c sets based on priority, depending on what is enabled at build time), I was wondering if we shouldn't just drop this function entirely.
While I agree the board should have a set of defaults, not allowing the user to change something like env location via CONFIGs seems wrong to me.
Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup.
I disagree. I see no actual need to hardcode the environment location the way it is done. It serves no purpose.
And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
are you saying that unless you have a DT change you wont let the user choose where the place the environment?
I am not saying that. I have really not a problem to disable this code under any Kconfig option that user have option to disable it. But I want to have it enabled by default.
And DT changes are pretty much the way what I think is the right way for enabling multiple locations where vars can be stored.
Couldn't this just be extended? E.g. exactly the way Ricardo described:
I am not quite sure I am following you how you want to extend it. Definitely send a patch I will take a look.
case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH;
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))return ENVL_FAT;if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))return ENVL_EXT4; return ENVL_NOWHERE;Here the first priority is SPI, then FAT, then EXT4. The default is sane, but there are still backup locations.
IIRC backup locations have own offset or values which are saying where they are stored. It means you can tune it to way you like. And as above I am ok with Kconfig option not to call this function at all. Then you can select options via Kconfig based on product you target.
Then a generic Kconfig entry that could be used by any board, because this same issue applies on other socs.
It is just more annoying here as most zynqmp targets are based out of the same config and machine, so the generic target ends up being way too opinionated from my perspective.
Cheers,
On 2/17/22 01:43, Ricardo Salveti wrote:
On Tue, Feb 15, 2022 at 12:39 PM Michal Simek michal.simek@xilinx.com wrote:
On 2/15/22 16:02, Sean Anderson wrote:
On 2/15/22 8:54 AM, Michal Simek wrote:
Hi,
On 2/15/22 14:27, Jorge Ramirez-Ortiz, Foundries wrote:
On 15/02/22, Michal Simek wrote:
Hi,
On 2/14/22 21:10, Ricardo Salveti wrote: > Hi Michal, > > This is a bit similar to the issue raised on iMX8-based targets a few > days ago, which is forcing the environment location based on the boot > mode and not allowing the user to use a different option via other > CONFIG options. > > Should we really force the env location based on boot mode? Currently > there is no way to boot out of QSPI and save the environment on > emmc/fat/ext4, and removing CONFIG_ENV_IS_IN_SPI_FLASH causes the env > location to be set as ENVL_NOWHERE, which is not ideal, especially > when other env target locations are available at build time. > > diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c > index f0be9c022a7..08afb49570a 100644 > --- a/board/xilinx/zynqmp/zynqmp.c > +++ b/board/xilinx/zynqmp/zynqmp.c > @@ -969,6 +969,10 @@ enum env_location env_get_location(enum > env_operation op, int prio) > case QSPI_MODE_32BIT: > if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) > return ENVL_SPI_FLASH; > + if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) > + return ENVL_FAT; > + if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) > + return ENVL_EXT4; > return ENVL_NOWHERE; > case JTAG_MODE: > default: > > A change like this one would allow other locations to be set, and just > use the boot mode to assign the priority instead. > > Since I couldn't really find out what is the expected behavior on > functions defined at soc/board level (env.c sets based on priority, > depending on what is enabled at build time), I was wondering if we > shouldn't just drop this function entirely. > > While I agree the board should have a set of defaults, not allowing > the user to change something like env location via CONFIGs seems wrong > to me. > > Let me know what you think.
Default location is setup based on how Xilinx sees where that variables should be saved for the most cases that's why that function was done like this. That's why I think that it is very reasonable default setup.
I disagree. I see no actual need to hardcode the environment location the way it is done. It serves no purpose.
And as is hopefully known we are using pretty generic u-boot which should work on all configurations it means default defconfig have all options enabled.
Does it make sense to have an option to change it to any configuration? Definitely.
How to do it? DT is for us source of truth that's why I prefer to have DT description which is providing all information. It means say where variables should be stored, where redundant variables should be stored. IIRC as of today I think they have to be on the same device which can be also more flexible. You can specify different start/end in qspis, etc.
What has to happen? Someone has to take a lead and come up with generic universal DT binding to be able describe it. Some days ago linaro had similar issue with DT in connection to A/B update via GPT partition. And description for it should be pretty much the same as is for variables.
are you saying that unless you have a DT change you wont let the user choose where the place the environment?
I am not saying that. I have really not a problem to disable this code under any Kconfig option that user have option to disable it. But I want to have it enabled by default.
And DT changes are pretty much the way what I think is the right way for enabling multiple locations where vars can be stored.
Couldn't this just be extended? E.g. exactly the way Ricardo described:
I am not quite sure I am following you how you want to extend it. Definitely send a patch I will take a look.
case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH;
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))return ENVL_FAT;if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))return ENVL_EXT4; return ENVL_NOWHERE;Here the first priority is SPI, then FAT, then EXT4. The default is sane, but there are still backup locations.
IIRC backup locations have own offset or values which are saying where they are stored. It means you can tune it to way you like. And as above I am ok with Kconfig option not to call this function at all. Then you can select options via Kconfig based on product you target.
Then a generic Kconfig entry that could be used by any board, because this same issue applies on other socs.
It is just more annoying here as most zynqmp targets are based out of the same config and machine, so the generic target ends up being way too opinionated from my perspective.
None is stopping you to fix it properly for all SOCs. Feel free to join that other threads to have generic description for this functionality. I am definitely happy to switch to it.
Thanks, Michal
participants (5)
-
Jorge Ramirez-Ortiz, Foundries -
Michal Simek -
Rafał Miłecki -
Ricardo Salveti -
Sean Anderson