Hi Michael,

On Mon, Feb 27, 2023 at 4:01 PM Dario Binacchi dario.binacchi@amarulasolutions.com wrote:

From: Michael Trimarchi michael@amarulasolutions.com

The "nand chip.erase" command always printed as bad blocks even in the case of reserved blocks. Reserved blocks are used for storing bad block tables. The patch displays "bbt reserved" when printing reserved blocks in "nand chip.erase" command.

Signed-off-by: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Dario Binacchi dario.binacchi@amarulasolutions.com

---

drivers/mtd/nand/raw/nand_util.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/nand_util.c b/drivers/mtd/nand/raw/nand_util.c index b2345dca7f71..72cc24f40376 100644 --- a/drivers/mtd/nand/raw/nand_util.c +++ b/drivers/mtd/nand/raw/nand_util.c @@ -113,9 +113,10 @@ int nand_erase_opts(struct mtd_info *mtd, int ret = mtd_block_isbad(mtd, erase.addr); if (ret > 0) { if (!opts->quiet)

•                                   printf("\rSkipping bad block at  "
  

•                                   printf("\rSkipping %s at  "
                                           "0x%08llx                 "
                                           "                         \n",
  

•                                          ret == 1 ? "bad block" : "bbt reserved",
                                           erase.addr);
  
                            if (!opts->spread)
  

-- 2.32.0

Applied to nand-next,

Thanks and regards

Dario