[U-Boot-Users] How to let u-boot support non-standard board (AX88796B NIC)
Dear experts,
With your help, I'v now successfully compiled u-boot-1.3.3-rc3 and got the `u-boot' boot loader image file. My compiling command line is `./MAKEALL sbc2410x' since the MPU in my board is a samsung s3c2410A. But I think the board is not a standard sbc2410x or smdk2410, because it's NIC chip is a AX88796B. I searched goole, and fond: http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=80;65;86&.... It seems the AX88796B is a Realtek RTL8019 Driver Equivalent. So I want to know, do I need do anything to make the u-boot working on my board, and how?
The same question applies to how to build the kernel. I check all config files in /my/eldk-4.1/installation/arm/usr/src//linux-2.6.19.2/arch/arm/configs, and had not found any work like RTL8019.
Thanks in advance.
On Thu, May 15, 2008 at 10:33 AM, Steven Woody narkewoody@gmail.com wrote:
Dear experts,
With your help, I'v now successfully compiled u-boot-1.3.3-rc3 and got the `u-boot' boot loader image file. My compiling command line is `./MAKEALL sbc2410x' since the MPU in my board is a samsung s3c2410A. But I think the board is not a standard sbc2410x or smdk2410, because it's NIC chip is a AX88796B. I searched goole, and fond: http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=80;65;86&.... It seems the AX88796B is a Realtek RTL8019 Driver Equivalent. So I want to know, do I need do anything to make the u-boot working on my board, and how?
The same question applies to how to build the kernel. I check all config files in /my/eldk-4.1/installation/arm/usr/src//linux-2.6.19.2/arch/arm/configs, and had not found any work like RTL8019.
Thanks in advance.
Maybe I should ask this way for simple: Could I drive a AX88796B NIC with u-boot on a s3c2410 based board? The AX88796B is claimed as rtl8019 equivalent.
Thanks in advance.
participants (1)
-
Steven Woody