[U-Boot] [PATCH v2 0/3] arm: am57xx/dra7xx: Boot Android from eMMC
Provide a way to boot Android from eMMC for AM57xx EVM and DRA7 EVM boards.
Changes in v2: - Do not remove the attempt to boot regular Linux from eMMC (just add Android boot in the end of the cycle)
Sam Protsenko (3): arm: omap: Define command for booting Android from eMMC arm: am57xx: Define Android boot arguments arm: dra7xx: Define Android boot arguments
configs/am57xx_evm_defconfig | 2 ++ configs/am57xx_evm_nodt_defconfig | 2 ++ configs/am57xx_hs_evm_defconfig | 2 ++ configs/dra7xx_evm_defconfig | 2 ++ configs/dra7xx_hs_evm_defconfig | 2 ++ include/environment/ti/boot.h | 20 +++++++++++++++++++- 6 files changed, 29 insertions(+), 1 deletion(-)
If SD card is present -- try to boot from it first. If no -- try to boot Android from eMMC.
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org --- Changes in v2: - Do not remove the attempt to boot regular Linux from eMMC (just add Android boot in the end of the cycle)
include/environment/ti/boot.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h index 1c3ae40a99..a05f5ba9bd 100644 --- a/include/environment/ti/boot.h +++ b/include/environment/ti/boot.h @@ -28,7 +28,24 @@ "vram=16M\0" \ "partitions=" PARTS_DEFAULT "\0" \ "optargs=\0" \ - "dofastboot=0\0" + "dofastboot=0\0" \ + "emmc_android_boot=" \ + "setenv eval_bootargs setenv bootargs $bootargs; " \ + "run eval_bootargs; " \ + "setenv mmcdev 1; " \ + "setenv fdt_part 3; " \ + "setenv boot_part 9; " \ + "setenv machid fe6; " \ + "mmc dev $mmcdev; " \ + "mmc rescan; " \ + "part start mmc ${mmcdev} ${fdt_part} fdt_start; " \ + "part size mmc ${mmcdev} ${fdt_part} fdt_size; " \ + "part start mmc ${mmcdev} ${boot_part} boot_start; " \ + "part size mmc ${mmcdev} ${boot_part} boot_size; " \ + "mmc read ${fdtaddr} ${fdt_start} ${fdt_size}; " \ + "mmc read ${loadaddr} ${boot_start} ${boot_size}; " \ + "echo Booting from eMMC ...; " \ + "bootm $loadaddr $loadaddr $fdtaddr;\0"
#ifdef CONFIG_OMAP54XX
@@ -76,6 +93,7 @@ "setenv bootpart 1:2; " \ "setenv mmcroot /dev/mmcblk0p2 rw; " \ "run mmcboot;" \ + "run emmc_android_boot; " \ ""
#endif /* CONFIG_OMAP54XX */
On 08/16/2017 09:55 PM, Sam Protsenko wrote:
If SD card is present -- try to boot from it first. If no -- try to boot Android from eMMC.
Well, i didn't know exactly..but is it working?
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org
Changes in v2:
- Do not remove the attempt to boot regular Linux from eMMC (just add Android boot in the end of the cycle)
include/environment/ti/boot.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h index 1c3ae40a99..a05f5ba9bd 100644 --- a/include/environment/ti/boot.h +++ b/include/environment/ti/boot.h @@ -28,7 +28,24 @@ "vram=16M\0" \ "partitions=" PARTS_DEFAULT "\0" \ "optargs=\0" \
- "dofastboot=0\0"
- "dofastboot=0\0" \
- "emmc_android_boot=" \
"setenv eval_bootargs setenv bootargs $bootargs; " \"run eval_bootargs; " \"setenv mmcdev 1; " \
Need to do "setenv mmcdev 1"? Did it already set before doing "run emmc_android_boot;"?
"setenv fdt_part 3; " \"setenv boot_part 9; " \"setenv machid fe6; " \"mmc dev $mmcdev; " \"mmc rescan; " \
Why do "mmc rescan"?
"part start mmc ${mmcdev} ${fdt_part} fdt_start; " \"part size mmc ${mmcdev} ${fdt_part} fdt_size; " \"part start mmc ${mmcdev} ${boot_part} boot_start; " \"part size mmc ${mmcdev} ${boot_part} boot_size; " \"mmc read ${fdtaddr} ${fdt_start} ${fdt_size}; " \"mmc read ${loadaddr} ${boot_start} ${boot_size}; " \"echo Booting from eMMC ...; " \"bootm $loadaddr $loadaddr $fdtaddr;\0"#ifdef CONFIG_OMAP54XX
@@ -76,6 +93,7 @@ "setenv bootpart 1:2; " \ "setenv mmcroot /dev/mmcblk0p2 rw; " \ "run mmcboot;" \
- "run emmc_android_boot; " \ ""
#endif /* CONFIG_OMAP54XX */
On 18 August 2017 at 14:42, Jaehoon Chung jh80.chung@samsung.com wrote:
On 08/16/2017 09:55 PM, Sam Protsenko wrote:
If SD card is present -- try to boot from it first. If no -- try to boot Android from eMMC.
Well, i didn't know exactly..but is it working?
Yes, I verified it on AM57x EVM, it's working just fine. All my previous patches were meant exactly for this: booting Android from eMMC. This patch series just finishes the job.
Do you see anything suspicious about this? If so, please tell.
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org
Changes in v2:
- Do not remove the attempt to boot regular Linux from eMMC (just add Android boot in the end of the cycle)
include/environment/ti/boot.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h index 1c3ae40a99..a05f5ba9bd 100644 --- a/include/environment/ti/boot.h +++ b/include/environment/ti/boot.h @@ -28,7 +28,24 @@ "vram=16M\0" \ "partitions=" PARTS_DEFAULT "\0" \ "optargs=\0" \
"dofastboot=0\0"
"dofastboot=0\0" \"emmc_android_boot=" \"setenv eval_bootargs setenv bootargs $bootargs; " \"run eval_bootargs; " \"setenv mmcdev 1; " \Need to do "setenv mmcdev 1"? Did it already set before doing "run emmc_android_boot;"?
Frankly, I want to keep "emmc_android_boot" command as explicit and independent as I can. Say, if user changes "mmcdev" variable, I want to be sure that "emmc_android_boot" will fix it.
"setenv fdt_part 3; " \"setenv boot_part 9; " \"setenv machid fe6; " \"mmc dev $mmcdev; " \"mmc rescan; " \Why do "mmc rescan"?
The same as above. I want to keep this command independent. So that if user was using SD card, "emmc_android_boot" will switch to eMMC anyway, before trying to boot.
"part start mmc ${mmcdev} ${fdt_part} fdt_start; " \"part size mmc ${mmcdev} ${fdt_part} fdt_size; " \"part start mmc ${mmcdev} ${boot_part} boot_start; " \"part size mmc ${mmcdev} ${boot_part} boot_size; " \"mmc read ${fdtaddr} ${fdt_start} ${fdt_size}; " \"mmc read ${loadaddr} ${boot_start} ${boot_size}; " \"echo Booting from eMMC ...; " \"bootm $loadaddr $loadaddr $fdtaddr;\0"#ifdef CONFIG_OMAP54XX
@@ -76,6 +93,7 @@ "setenv bootpart 1:2; " \ "setenv mmcroot /dev/mmcblk0p2 rw; " \ "run mmcboot;" \
"run emmc_android_boot; " \ ""#endif /* CONFIG_OMAP54XX */
On Wed, Aug 16, 2017 at 03:55:48PM +0300, Semen Protsenko wrote:
If SD card is present -- try to boot from it first. If no -- try to boot Android from eMMC.
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org
Applied to u-boot/master, thanks!
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org --- Changes in v2: - None
configs/am57xx_evm_defconfig | 2 ++ configs/am57xx_evm_nodt_defconfig | 2 ++ configs/am57xx_hs_evm_defconfig | 2 ++ 3 files changed, 6 insertions(+)
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 11be1ad27f..ad93602c13 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -14,6 +14,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_OF_BOARD_SETUP=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=am57xevmboard" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/am57xx_evm_nodt_defconfig b/configs/am57xx_evm_nodt_defconfig index a6ad0d36e0..e6f71e9133 100644 --- a/configs/am57xx_evm_nodt_defconfig +++ b/configs/am57xx_evm_nodt_defconfig @@ -6,6 +6,8 @@ CONFIG_TARGET_AM57XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=am57xevmboard" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index 91baa2b53e..5cd34561a7 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=am57xevmboard" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y
On Wed, Aug 16, 2017 at 03:55:49PM +0300, Semen Protsenko wrote:
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org
Applied to u-boot/master, thanks!
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org --- Changes in v2: - None
configs/dra7xx_evm_defconfig | 2 ++ configs/dra7xx_hs_evm_defconfig | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 4fff0cf734..0357abc6cd 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -14,6 +14,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_OF_BOARD_SETUP=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 5572472d01..246de12543 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y
On Wed, Aug 16, 2017 at 03:55:50PM +0300, Semen Protsenko wrote:
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org
Applied to u-boot/master, thanks!
participants (3)
-
Jaehoon Chung -
Sam Protsenko -
Tom Rini