imx31_litekit has been converted to the new relocation scheme, but it does not boot.

Make the boot functional by using board_early_init_f .

Signed-off-by: Fabio Estevam fabio.estevam@freescale.com Tested-by: Magnus Lilja lilja.magnus@gmail.com --- board/logicpd/imx31_litekit/imx31_litekit.c | 17 +++++++++++------ include/configs/imx31_litekit.h | 1 + 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c index 2ed742f..9918557 100644 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ b/board/logicpd/imx31_litekit/imx31_litekit.c @@ -29,21 +29,21 @@

DECLARE_GLOBAL_DATA_PTR;

-int dram_init (void) +int dram_init(void) { - gd->ram_size = PHYS_SDRAM_1_SIZE; - + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); return 0; }

-void -dram_init_banksize (void) +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; }

-int board_init (void) +int board_early_init_f(void) { __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */ __REG(CSCR_L(0)) = 0xa0330d01; @@ -71,6 +71,11 @@ int board_init (void) /* start SPI2 clock */ __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);

+ return 0; +} + +int board_init(void) +{ gd->bd->bi_arch_number = MACH_TYPE_MX31LITE; /* board id for linux */ gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */

diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 9405f56..7ee7076 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -145,6 +145,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_SYS_SDRAM_BASE CSD0_BASE #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR