Hi Angus,

On 4/22/22 1:47 PM, Angus Ainslie wrote:

Suppress warnings when building the SPL without USB_DWC3_GENERIC

Signed-off-by: Angus Ainslie angus@akkea.ca

drivers/usb/dwc3/Kconfig | 7 +++++++ drivers/usb/dwc3/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 62aa65bf0c..93dffeb1f9 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -30,6 +30,13 @@ config USB_DWC3_GENERIC Select this for Xilinx ZynqMP and similar Platforms. This wrapper supports Host and Peripheral operation modes.

+config SPL_USB_DWC3_GENERIC

• bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue) for the SPL"
• depends on DM_USB && USB_DWC3 && MISC

Shouldn't this be SPL_DM_USB && USB_DWC3 && SPL_MISC?

--Sean

• help

•  Select this for Xilinx ZynqMP and similar Platforms.
  

•  This wrapper supports Host and Peripheral operation modes.
  

config USB_DWC3_MESON_G12A bool "Amlogic Meson G12A USB wrapper" depends on DM_USB && USB_DWC3 && ARCH_MESON diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 0dd1ba87cd..97b4f7191c 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o obj-$(CONFIG_USB_DWC3_MESON_GXL) += dwc3-meson-gxl.o -obj-$(CONFIG_USB_DWC3_GENERIC) += dwc3-generic.o +obj-$(CONFIG_$(SPL_)USB_DWC3_GENERIC) += dwc3-generic.o obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o obj-$(CONFIG_USB_DWC3_LAYERSCAPE) += dwc3-layerscape.o obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o