In order to boot an LDR out of parallel flash, the ldr utility needs a few flags to tell it to generate the right header.

Signed-off-by: Mike Frysinger vapier@gentoo.org --- board/bf533-ezkit/config.mk | 6 ++++++ board/bf533-stamp/config.mk | 6 ++++++ board/bf537-stamp/config.mk | 5 ++++- board/bf561-ezkit/config.mk | 6 ++++++ 4 files changed, 22 insertions(+), 1 deletions(-)

diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk index de80ffe..9847924 100644 --- a/board/bf533-ezkit/config.mk +++ b/board/bf533-ezkit/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -23,3 +25,7 @@

# This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me + +# Set some default LDR flags based on boot mode. +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk index de80ffe..9847924 100644 --- a/board/bf533-stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -23,3 +25,7 @@

# This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me + +# Set some default LDR flags based on boot mode. +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index 1b87d53..d9e884e 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -25,5 +27,6 @@ #TEXT_BASE = do-not-use-me

# Set some default LDR flags based on boot mode. -LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 +LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk index de80ffe..77c888b 100644 --- a/board/bf561-ezkit/config.mk +++ b/board/bf561-ezkit/config.mk @@ -1,4 +1,6 @@ # +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2001 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -23,3 +25,7 @@

# This is not actually used for Blackfin boards so do not change it #TEXT_BASE = do-not-use-me + +# Set some default LDR flags based on boot mode. +LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))