Add weak implementation of board_early_init_f() hook into the STM32MP1 SPL. This can be used to read out e.g. configuration straps before initializing the DRAM.

Signed-off-by: Marek Vasut marex@denx.de Cc: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Cc: Patrick Delaunay patrick.delaunay@st.com Cc: Patrice Chotard patrice.chotard@st.com --- V2: No change --- arch/arm/mach-stm32mp/spl.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c index ca4231cd0d..cd14d1065e 100644 --- a/arch/arm/mach-stm32mp/spl.c +++ b/arch/arm/mach-stm32mp/spl.c @@ -76,6 +76,11 @@ void spl_display_print(void) } #endif

+__weak int board_early_init_f(void) +{ + return 0; +} + void board_init_f(ulong dummy) { struct udevice *dev; @@ -110,6 +115,12 @@ void board_init_f(ulong dummy) /* enable console uart printing */ preloader_console_init();

+ ret = board_early_init_f(); + if (ret) { + debug("board_early_init_f() failed: %d\n", ret); + hang(); + } + ret = uclass_get_device(UCLASS_RAM, 0, &dev); if (ret) { printf("DRAM init failed: %d\n", ret);

The AV96 board does exist in multiple variants. To cater for all of them, implement board code handling. There are two GPIOs which code the type of the board, read them out and use the value to pick the correct device tree from an fitImage.

Signed-off-by: Marek Vasut marex@denx.de Cc: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Cc: Patrick Delaunay patrick.delaunay@st.com Cc: Patrice Chotard patrice.chotard@st.com --- V2: No change --- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 3 + .../stm32mp15xx-dhcor-avenger96-u-boot.dtsi | 1 + arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 9 +++ board/dhelectronics/dh_stm32mp1/Kconfig | 2 +- board/dhelectronics/dh_stm32mp1/board.c | 61 +++++++++++++++++++ .../dh_stm32mp1/u-boot-dhcom.its | 39 ++++++++++++ .../dh_stm32mp1/u-boot-dhcor.its | 39 ++++++++++++ configs/stm32mp15_dhcom_basic_defconfig | 3 + configs/stm32mp15_dhcor_basic_defconfig | 3 + include/configs/dh_stm32mp1.h | 15 +++++ 10 files changed, 174 insertions(+), 1 deletion(-) create mode 100644 board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its create mode 100644 board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its create mode 100644 include/configs/dh_stm32mp1.h

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index eba3588540..fcdc5e6859 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -19,10 +19,13 @@ };

config { + u-boot,dm-pre-reloc; u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + #gpio-cells = <2>; + dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>; };

led { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi index 4207a96618..7ccec95f15 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi @@ -15,6 +15,7 @@ config { u-boot,boot-led = "led1"; u-boot,error-led = "led4"; + dh,board-coding-gpios = <&gpiog 13 0>, <&gpiod 9 0>; }; };

diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index 02dad81b0b..17a23ae21c 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -11,6 +11,15 @@ #include "stm32mp157-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"

+/ { + u-boot,dm-pre-reloc; + config { + u-boot,dm-pre-reloc; + #gpio-cells = <2>; + dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>; + }; +}; + &i2c4 { u-boot,dm-pre-reloc; }; diff --git a/board/dhelectronics/dh_stm32mp1/Kconfig b/board/dhelectronics/dh_stm32mp1/Kconfig index 8eab986640..0a839f2546 100644 --- a/board/dhelectronics/dh_stm32mp1/Kconfig +++ b/board/dhelectronics/dh_stm32mp1/Kconfig @@ -7,7 +7,7 @@ config SYS_VENDOR default "dhelectronics"

config SYS_CONFIG_NAME - default "stm32mp1" + default "dh_stm32mp1"

config ENV_SECT_SIZE default 0x10000 if ENV_IS_IN_SPI_FLASH diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index a3458a2623..b72d113a6f 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -133,6 +133,62 @@ int checkboard(void) return 0; }

+#ifdef CONFIG_BOARD_EARLY_INIT_F +static u8 brdcode __section("data"); +static u8 somcode __section("data"); + +static void board_get_coding_straps(void) +{ + struct gpio_desc gpio[4]; + ofnode node; + int i, ret; + + node = ofnode_path("/config"); + if (!ofnode_valid(node)) { + printf("%s: no /config node?\n", __func__); + return; + } + + brdcode = 0; + somcode = 0; + + ret = gpio_request_list_by_name_nodev(node, "dh,som-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + somcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + + ret = gpio_request_list_by_name_nodev(node, "dh,board-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + brdcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + + printf("Code: SoM:rev=%d Board:rev=%d\n", somcode, brdcode); +} + +int board_early_init_f(void) +{ + board_get_coding_straps(); + + return 0; +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + char test[20]; + + snprintf(test, sizeof(test), "somrev%d_boardrev%d", somcode, brdcode); + + if (!strcmp(name, test)) + return 0; + + return -EINVAL; +} +#endif +#endif + static void board_key_check(void) { #if defined(CONFIG_FASTBOOT) || defined(CONFIG_CMD_STM32PROG) @@ -478,6 +534,11 @@ int board_late_init(void) if (!strcmp(boot_device, "serial") || !strcmp(boot_device, "usb")) env_set("bootdelay", "0");

+#ifdef CONFIG_BOARD_EARLY_INIT_F + env_set_ulong("dh_som_rev", somcode); + env_set_ulong("dh_board_rev", brdcode); +#endif + return 0; }

diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its new file mode 100644 index 0000000000..a4574ea135 --- /dev/null +++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its @@ -0,0 +1,39 @@ +/dts-v1/; + +/ { + description = "U-Boot mainline"; + #address-cells = <1>; + + images { + uboot { + description = "U-Boot (32-bit)"; + data = /incbin/("../../../u-boot-nodtb.bin"); + type = "standalone"; + os = "U-Boot"; + arch = "arm"; + compression = "none"; + load = <0xc0100000>; + entry = <0xc0100000>; + }; + + fdt-1 { + description = ".dtb"; + data = /incbin/("../../../arch/arm/dts/stm32mp15xx-dhcom-pdk2.dtb"); + type = "flat_dt"; + arch = "arm"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + + config-1 { + description = "somrev0_boardrev0"; /* SoM+board model */ + loadables = "uboot"; + fdt = "fdt-1"; + }; + + /* Add 587-100..587-400 with fdt-2..fdt-4 here */ + }; +}; diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its b/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its new file mode 100644 index 0000000000..0a8b6ac857 --- /dev/null +++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its @@ -0,0 +1,39 @@ +/dts-v1/; + +/ { + description = "U-Boot mainline"; + #address-cells = <1>; + + images { + uboot { + description = "U-Boot (32-bit)"; + data = /incbin/("../../../u-boot-nodtb.bin"); + type = "standalone"; + os = "U-Boot"; + arch = "arm"; + compression = "none"; + load = <0xc0100000>; + entry = <0xc0100000>; + }; + + fdt-1 { + description = ".dtb"; + data = /incbin/("../../../arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtb"); + type = "flat_dt"; + arch = "arm"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + + config-1 { + description = "somrev0_boardrev1"; /* SoM+board model */ + loadables = "uboot"; + fdt = "fdt-1"; + }; + + /* Add 586-200..586-400 with fdt-2..fdt-4 here */ + }; +}; diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 28824cf813..81222ce444 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -11,7 +11,10 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_TEXT_BASE=0x2FFC2500 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its" CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_I2C_SUPPORT=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 4a968609fe..e75ed1a932 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -11,7 +11,10 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_TEXT_BASE=0x2FFC2500 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its" CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_I2C_SUPPORT=y diff --git a/include/configs/dh_stm32mp1.h b/include/configs/dh_stm32mp1.h new file mode 100644 index 0000000000..89d317ba2b --- /dev/null +++ b/include/configs/dh_stm32mp1.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (C) 2020 Marek Vasut marex@denx.de + * + * Configuration settings for the DH STM32MP15x SoMs + */ + +#ifndef __CONFIG_DH_STM32MP1_H__ +#define __CONFIG_DH_STM32MP1_H__ + +#include <configs/stm32mp1.h> + +#define CONFIG_SPL_TARGET "u-boot.itb" + +#endif

Add support for multiple DRAM configuration subnodes, while retaining the support for a single flat DRAM configuration node. This is useful on systems which can be manufactured in multiple configurations and where the DRAM configuration can be determined at runtime.

The code is augmented by a function which can be overridden on board level, allowing a match on the configuration node name, very much like the fitImage configuration node name matching works. The default match is on the single top-level DRAM configuration, if matching on subnodes is required, then this board_stm32mp1_ddr_config_name_match() must be overridden.

Signed-off-by: Marek Vasut marex@denx.de Cc: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Cc: Patrick Delaunay patrick.delaunay@st.com Cc: Patrice Chotard patrice.chotard@st.com --- V2: Match on compatible string --- drivers/ram/stm32mp1/stm32mp1_ram.c | 39 +++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index eb78f1198d..21c220694e 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -57,6 +57,33 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) return 0; }

+__weak int board_stm32mp1_ddr_config_name_match(struct udevice *dev, + const char *name) +{ + return 0; /* Always match */ +} + +static ofnode stm32mp1_ddr_get_ofnode(struct udevice *dev) +{ + const char *name; + int name_size; + ofnode node; + + node = dev_ofnode(dev); + name = ofnode_get_property(node, "compatible", &name_size); + if (!board_stm32mp1_ddr_config_name_match(dev, name)) + return node; + + dev_for_each_subnode(node, dev) { + name = ofnode_get_property(node, "compatible", &name_size); + + if (!board_stm32mp1_ddr_config_name_match(dev, name)) + return node; + } + + return ofnode_null(); +} + static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) { struct ddr_info *priv = dev_get_priv(dev); @@ -64,6 +91,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) unsigned int idx; struct clk axidcg; struct stm32mp1_ddr_config config; + ofnode node = stm32mp1_ddr_get_ofnode(dev);

#define PARAM(x, y) \ { x,\ @@ -87,9 +115,9 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) PHY_PARAM(cal) };

- config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0); - config.info.size = dev_read_u32_default(dev, "st,mem-size", 0); - config.info.name = dev_read_string(dev, "st,mem-name"); + config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0); + config.info.size = ofnode_read_u32_default(node, "st,mem-size", 0); + config.info.name = ofnode_read_string(node, "st,mem-name"); if (!config.info.name) { debug("%s: no st,mem-name\n", __func__); return -EINVAL; @@ -97,7 +125,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) printf("RAM: %s\n", config.info.name);

for (idx = 0; idx < ARRAY_SIZE(param); idx++) { - ret = dev_read_u32_array(dev, param[idx].name, + ret = ofnode_read_u32_array(node, param[idx].name, (void *)((u32)&config + param[idx].offset), param[idx].size); @@ -164,7 +192,8 @@ static int stm32mp1_ddr_probe(struct udevice *dev) priv->info.size = 0; return stm32mp1_ddr_setup(dev); #else - priv->info.size = dev_read_u32_default(dev, "st,mem-size", 0); + ofnode node = stm32mp1_ddr_get_ofnode(dev); + priv->info.size = ofnode_read_u32_default(node, "st,mem-size", 0); return 0; #endif }

Adjust the DDR configuration dtsi such that they only generate the DRAM configuration node, the DDR controller node is moved into the stm32mp157-u-boot.dtsi itself. This permits including multiple DDR configuration dtsi files in board DT.

Signed-off-by: Marek Vasut marex@denx.de Cc: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Cc: Patrick Delaunay patrick.delaunay@st.com Cc: Patrice Chotard patrice.chotard@st.com --- V2: Add compatible string --- arch/arm/dts/stm32mp15-ddr.dtsi | 358 +++++++++++------- .../dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi | 1 + .../dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi | 1 + arch/arm/dts/stm32mp157-u-boot.dtsi | 25 ++ 4 files changed, 248 insertions(+), 137 deletions(-)

diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi index 38f29bb789..026237b088 100644 --- a/arch/arm/dts/stm32mp15-ddr.dtsi +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -2,153 +2,237 @@ /* * Copyright : STMicroelectronics 2018 */ +#include <linux/stringify.h>

-/ { - soc { - ddr: ddr@5a003000 { - u-boot,dm-pre-reloc; +&ddr { + config-DDR_MEM_COMPATIBLE { + u-boot,dm-pre-reloc;

- compatible = "st,stm32mp1-ddr"; + compatible = __stringify(st,DDR_MEM_COMPATIBLE);

- reg = <0x5A003000 0x550 - 0x5A004000 0x234>; + st,mem-name = DDR_MEM_NAME; + st,mem-speed = <DDR_MEM_SPEED>; + st,mem-size = <DDR_MEM_SIZE>;

- clocks = <&rcc AXIDCG>, - <&rcc DDRC1>, - <&rcc DDRC2>, - <&rcc DDRPHYC>, - <&rcc DDRCAPB>, - <&rcc DDRPHYCAPB>; + st,ctl-reg = < + DDR_MSTR + DDR_MRCTRL0 + DDR_MRCTRL1 + DDR_DERATEEN + DDR_DERATEINT + DDR_PWRCTL + DDR_PWRTMG + DDR_HWLPCTL + DDR_RFSHCTL0 + DDR_RFSHCTL3 + DDR_CRCPARCTL0 + DDR_ZQCTL0 + DDR_DFITMG0 + DDR_DFITMG1 + DDR_DFILPCFG0 + DDR_DFIUPD0 + DDR_DFIUPD1 + DDR_DFIUPD2 + DDR_DFIPHYMSTR + DDR_ODTMAP + DDR_DBG0 + DDR_DBG1 + DDR_DBGCMD + DDR_POISONCFG + DDR_PCCFG + >;

- clock-names = "axidcg", - "ddrc1", - "ddrc2", - "ddrphyc", - "ddrcapb", - "ddrphycapb"; + st,ctl-timing = < + DDR_RFSHTMG + DDR_DRAMTMG0 + DDR_DRAMTMG1 + DDR_DRAMTMG2 + DDR_DRAMTMG3 + DDR_DRAMTMG4 + DDR_DRAMTMG5 + DDR_DRAMTMG6 + DDR_DRAMTMG7 + DDR_DRAMTMG8 + DDR_DRAMTMG14 + DDR_ODTCFG + >;

- st,mem-name = DDR_MEM_NAME; - st,mem-speed = <DDR_MEM_SPEED>; - st,mem-size = <DDR_MEM_SIZE>; + st,ctl-map = < + DDR_ADDRMAP1 + DDR_ADDRMAP2 + DDR_ADDRMAP3 + DDR_ADDRMAP4 + DDR_ADDRMAP5 + DDR_ADDRMAP6 + DDR_ADDRMAP9 + DDR_ADDRMAP10 + DDR_ADDRMAP11 + >;

- st,ctl-reg = < - DDR_MSTR - DDR_MRCTRL0 - DDR_MRCTRL1 - DDR_DERATEEN - DDR_DERATEINT - DDR_PWRCTL - DDR_PWRTMG - DDR_HWLPCTL - DDR_RFSHCTL0 - DDR_RFSHCTL3 - DDR_CRCPARCTL0 - DDR_ZQCTL0 - DDR_DFITMG0 - DDR_DFITMG1 - DDR_DFILPCFG0 - DDR_DFIUPD0 - DDR_DFIUPD1 - DDR_DFIUPD2 - DDR_DFIPHYMSTR - DDR_ODTMAP - DDR_DBG0 - DDR_DBG1 - DDR_DBGCMD - DDR_POISONCFG - DDR_PCCFG - >; + st,ctl-perf = < + DDR_SCHED + DDR_SCHED1 + DDR_PERFHPR1 + DDR_PERFLPR1 + DDR_PERFWR1 + DDR_PCFGR_0 + DDR_PCFGW_0 + DDR_PCFGQOS0_0 + DDR_PCFGQOS1_0 + DDR_PCFGWQOS0_0 + DDR_PCFGWQOS1_0 + DDR_PCFGR_1 + DDR_PCFGW_1 + DDR_PCFGQOS0_1 + DDR_PCFGQOS1_1 + DDR_PCFGWQOS0_1 + DDR_PCFGWQOS1_1 + >;

- st,ctl-timing = < - DDR_RFSHTMG - DDR_DRAMTMG0 - DDR_DRAMTMG1 - DDR_DRAMTMG2 - DDR_DRAMTMG3 - DDR_DRAMTMG4 - DDR_DRAMTMG5 - DDR_DRAMTMG6 - DDR_DRAMTMG7 - DDR_DRAMTMG8 - DDR_DRAMTMG14 - DDR_ODTCFG - >; + st,phy-reg = < + DDR_PGCR + DDR_ACIOCR + DDR_DXCCR + DDR_DSGCR + DDR_DCR + DDR_ODTCR + DDR_ZQ0CR1 + DDR_DX0GCR + DDR_DX1GCR + DDR_DX2GCR + DDR_DX3GCR + >;

- st,ctl-map = < - DDR_ADDRMAP1 - DDR_ADDRMAP2 - DDR_ADDRMAP3 - DDR_ADDRMAP4 - DDR_ADDRMAP5 - DDR_ADDRMAP6 - DDR_ADDRMAP9 - DDR_ADDRMAP10 - DDR_ADDRMAP11 - >; + st,phy-timing = < + DDR_PTR0 + DDR_PTR1 + DDR_PTR2 + DDR_DTPR0 + DDR_DTPR1 + DDR_DTPR2 + DDR_MR0 + DDR_MR1 + DDR_MR2 + DDR_MR3 + >;

- st,ctl-perf = < - DDR_SCHED - DDR_SCHED1 - DDR_PERFHPR1 - DDR_PERFLPR1 - DDR_PERFWR1 - DDR_PCFGR_0 - DDR_PCFGW_0 - DDR_PCFGQOS0_0 - DDR_PCFGQOS1_0 - DDR_PCFGWQOS0_0 - DDR_PCFGWQOS1_0 - DDR_PCFGR_1 - DDR_PCFGW_1 - DDR_PCFGQOS0_1 - DDR_PCFGQOS1_1 - DDR_PCFGWQOS0_1 - DDR_PCFGWQOS1_1 - >; + st,phy-cal = < + DDR_DX0DLLCR + DDR_DX0DQTR + DDR_DX0DQSTR + DDR_DX1DLLCR + DDR_DX1DQTR + DDR_DX1DQSTR + DDR_DX2DLLCR + DDR_DX2DQTR + DDR_DX2DQSTR + DDR_DX3DLLCR + DDR_DX3DQTR + DDR_DX3DQSTR + >;

- st,phy-reg = < - DDR_PGCR - DDR_ACIOCR - DDR_DXCCR - DDR_DSGCR - DDR_DCR - DDR_ODTCR - DDR_ZQ0CR1 - DDR_DX0GCR - DDR_DX1GCR - DDR_DX2GCR - DDR_DX3GCR - >; - - st,phy-timing = < - DDR_PTR0 - DDR_PTR1 - DDR_PTR2 - DDR_DTPR0 - DDR_DTPR1 - DDR_DTPR2 - DDR_MR0 - DDR_MR1 - DDR_MR2 - DDR_MR3 - >; - - st,phy-cal = < - DDR_DX0DLLCR - DDR_DX0DQTR - DDR_DX0DQSTR - DDR_DX1DLLCR - DDR_DX1DQTR - DDR_DX1DQSTR - DDR_DX2DLLCR - DDR_DX2DQTR - DDR_DX2DQSTR - DDR_DX3DLLCR - DDR_DX3DQTR - DDR_DX3DQSTR - >; - - status = "okay"; - }; + status = "okay"; }; }; + +#undef DDR_MEM_COMPATIBLE +#undef DDR_MEM_NAME +#undef DDR_MEM_SPEED +#undef DDR_MEM_SIZE + +#undef DDR_MSTR +#undef DDR_MRCTRL0 +#undef DDR_MRCTRL1 +#undef DDR_DERATEEN +#undef DDR_DERATEINT +#undef DDR_PWRCTL +#undef DDR_PWRTMG +#undef DDR_HWLPCTL +#undef DDR_RFSHCTL0 +#undef DDR_RFSHCTL3 +#undef DDR_RFSHTMG +#undef DDR_CRCPARCTL0 +#undef DDR_DRAMTMG0 +#undef DDR_DRAMTMG1 +#undef DDR_DRAMTMG2 +#undef DDR_DRAMTMG3 +#undef DDR_DRAMTMG4 +#undef DDR_DRAMTMG5 +#undef DDR_DRAMTMG6 +#undef DDR_DRAMTMG7 +#undef DDR_DRAMTMG8 +#undef DDR_DRAMTMG14 +#undef DDR_ZQCTL0 +#undef DDR_DFITMG0 +#undef DDR_DFITMG1 +#undef DDR_DFILPCFG0 +#undef DDR_DFIUPD0 +#undef DDR_DFIUPD1 +#undef DDR_DFIUPD2 +#undef DDR_DFIPHYMSTR +#undef DDR_ADDRMAP1 +#undef DDR_ADDRMAP2 +#undef DDR_ADDRMAP3 +#undef DDR_ADDRMAP4 +#undef DDR_ADDRMAP5 +#undef DDR_ADDRMAP6 +#undef DDR_ADDRMAP9 +#undef DDR_ADDRMAP10 +#undef DDR_ADDRMAP11 +#undef DDR_ODTCFG +#undef DDR_ODTMAP +#undef DDR_SCHED +#undef DDR_SCHED1 +#undef DDR_PERFHPR1 +#undef DDR_PERFLPR1 +#undef DDR_PERFWR1 +#undef DDR_DBG0 +#undef DDR_DBG1 +#undef DDR_DBGCMD +#undef DDR_POISONCFG +#undef DDR_PCCFG +#undef DDR_PCFGR_0 +#undef DDR_PCFGW_0 +#undef DDR_PCFGQOS0_0 +#undef DDR_PCFGQOS1_0 +#undef DDR_PCFGWQOS0_0 +#undef DDR_PCFGWQOS1_0 +#undef DDR_PCFGR_1 +#undef DDR_PCFGW_1 +#undef DDR_PCFGQOS0_1 +#undef DDR_PCFGQOS1_1 +#undef DDR_PCFGWQOS0_1 +#undef DDR_PCFGWQOS1_1 +#undef DDR_PGCR +#undef DDR_PTR0 +#undef DDR_PTR1 +#undef DDR_PTR2 +#undef DDR_ACIOCR +#undef DDR_DXCCR +#undef DDR_DSGCR +#undef DDR_DCR +#undef DDR_DTPR0 +#undef DDR_DTPR1 +#undef DDR_DTPR2 +#undef DDR_MR0 +#undef DDR_MR1 +#undef DDR_MR2 +#undef DDR_MR3 +#undef DDR_ODTCR +#undef DDR_ZQ0CR1 +#undef DDR_DX0GCR +#undef DDR_DX0DLLCR +#undef DDR_DX0DQTR +#undef DDR_DX0DQSTR +#undef DDR_DX1GCR +#undef DDR_DX1DLLCR +#undef DDR_DX1DQTR +#undef DDR_DX1DQSTR +#undef DDR_DX2GCR +#undef DDR_DX2DLLCR +#undef DDR_DX2DQTR +#undef DDR_DX2DQSTR +#undef DDR_DX3GCR +#undef DDR_DX3DLLCR +#undef DDR_DX3DQTR +#undef DDR_DX3DQSTR diff --git a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi index 11e8f2bef6..4e2bd47e86 100644 --- a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi @@ -16,6 +16,7 @@ * address mapping : RBC * Tc > + 85C : N */ +#define DDR_MEM_COMPATIBLE ddr3-1066-888-bin-g-1x4gb-533mhz #define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.45" #define DDR_MEM_SPEED 533000 #define DDR_MEM_SIZE 0x20000000 diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi index 4b70b60554..f10be58ffb 100644 --- a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi @@ -16,6 +16,7 @@ * address mapping : RBC * Tc > + 85C : N */ +#define DDR_MEM_COMPATIBLE ddr3-1066-888-bin-g-2x4gb-533mhz #define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.45" #define DDR_MEM_SPEED 533000 #define DDR_MEM_SIZE 0x40000000 diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi index 8f9535a4db..1279589a56 100644 --- a/arch/arm/dts/stm32mp157-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157-u-boot.dtsi @@ -36,6 +36,31 @@

soc { u-boot,dm-pre-reloc; + + ddr: ddr@5a003000 { + u-boot,dm-pre-reloc; + + compatible = "st,stm32mp1-ddr"; + + reg = <0x5A003000 0x550 + 0x5A004000 0x234>; + + clocks = <&rcc AXIDCG>, + <&rcc DDRC1>, + <&rcc DDRC2>, + <&rcc DDRPHYC>, + <&rcc DDRCAPB>, + <&rcc DDRPHYCAPB>; + + clock-names = "axidcg", + "ddrc1", + "ddrc2", + "ddrphyc", + "ddrcapb", + "ddrphycapb"; + + status = "okay"; + }; }; };