[U-Boot] *** [u-boot] Error 139 when config NAND relative setting
Hello, nice to meet everyone. I am new to U-boot development world.
i have a s5pv310 soc dk board, and i config. it as origen board. i want to use nand command in u-boot, so i add blow setting in origen.h /*enable nand command*/ #define CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_NAND_BASE 0x0CE00000
but i got error message about ***[U-boot] Error 139. After searched some solution, some said that Error 139 is the cross compile version is too low. but my cross compile is gcc-arm-none-eabi-4_6-2012q2, i think it is not the version problem.
without the nand relative config before i could build u-boot without any problem.
could somebody give me some points to fix this error. thanks.
ps. i don't know if i could consult building problem here. If u-boot mail-list is not proper to receive building problem please let me know. thanks again.
drivers/mtd/nand/libnand.o: In function `nand_init': /usr/v310/uboot_linaro/u-boot-linaro/drivers/mtd/nand/nand.c:104: undefined reference to `board_nand_init' /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/arm-none-eabi-ld.bfd: BFD (GNU Tools for ARM Embedded Processors) 2.21.1.20120613 assertion fail /home/build/work/jenkins-daily-build/src/binutils/bfd/elf32-arm.c:12274 /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/arm-none-eabi-ld.bfd: BFD (GNU Tools for ARM Embedded Processors) 2.21.1.20120613 assertion fail /home/build/work/jenkins-daily-build/src/binutils/bfd/elf32-arm.c:12511 /bin/bash: line 1: 3818 Segmentation fault /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/arm-none-eabi-ld.bfd -pie -T u-boot.lds -Bstatic -Ttext 0x43E00000 $UNDEF_LST arch/arm/cpu/armv7/start.o --start-group api/libapi.o arch/arm/cpu/armv7/exynos/libexynos.o arch/arm/cpu/armv7/libarmv7.o arch/arm/cpu/armv7/s5p-common/libs5p-common.o arch/arm/lib/libarm.o board/samsung/common/libsamsung.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dfu/libdfu.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/usb/ulpi/libusb_ulpi.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cbfs/libcbfs.o fs/cramfs/libcramfs.o fs/ext4/libext4fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/libfs.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o fs/zfs/libzfs.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o net/libnet.o post/libpost.o test/libtest.o board/samsung/origen/liborigen.o --end-group /usr/v310/uboot_linaro/u-boot-linaro/arch/arm/lib/eabi_compat.o -L /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/../lib/gcc/arm-none-eabi/4.6.2 -lgcc -Map u-boot.map -o u-boot make[1]: *** [u-boot] Error 139
On 09/13/2013 02:54 AM, Hsin-Hsiang Tseng wrote:
Hello, nice to meet everyone. I am new to U-boot development world.
i have a s5pv310 soc dk board, and i config. it as origen board. i want to use nand command in u-boot, so i add blow setting in origen.h /*enable nand command*/ #define CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_NAND_BASE 0x0CE00000
but i got error message about ***[U-boot] Error 139. After searched some solution, some said that Error 139 is the cross compile version is too low. but my cross compile is gcc-arm-none-eabi-4_6-2012q2, i think it is not the version problem.
No, its not a version problem.
If you look at the output from the link command, you'll see: "/usr/v310/uboot_linaro/u-boot-linaro/drivers/mtd/nand/nand.c:104: undefined reference to `board_nand_init'"
You're missing "board_nand_init" function...
without the nand relative config before i could build u-boot without any problem.
could somebody give me some points to fix this error. thanks.
ps. i don't know if i could consult building problem here. If u-boot mail-list is not proper to receive building problem please let me know. thanks again.
drivers/mtd/nand/libnand.o: In function `nand_init': /usr/v310/uboot_linaro/u-boot-linaro/drivers/mtd/nand/nand.c:104: undefined reference to `board_nand_init' /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/arm-none-eabi-ld.bfd: BFD (GNU Tools for ARM Embedded Processors) 2.21.1.20120613 assertion fail /home/build/work/jenkins-daily-build/src/binutils/bfd/elf32-arm.c:12274 /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/arm-none-eabi-ld.bfd: BFD (GNU Tools for ARM Embedded Processors) 2.21.1.20120613 assertion fail /home/build/work/jenkins-daily-build/src/binutils/bfd/elf32-arm.c:12511 /bin/bash: line 1: 3818 Segmentation fault /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/arm-none-eabi-ld.bfd -pie -T u-boot.lds -Bstatic -Ttext 0x43E00000 $UNDEF_LST arch/arm/cpu/armv7/start.o --start-group api/libapi.o arch/arm/cpu/armv7/exynos/libexynos.o arch/arm/cpu/armv7/libarmv7.o arch/arm/cpu/armv7/s5p-common/libs5p-common.o arch/arm/lib/libarm.o board/samsung/common/libsamsung.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dfu/libdfu.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/usb/ulpi/libusb_ulpi.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cbfs/libcbfs.o fs/cramfs/libcramfs.o fs/ext4/libext4fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/libfs.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o fs/zfs/libzfs.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o net/libnet.o post/libpost.o test/libtest.o board/samsung/origen/liborigen.o --end-group /usr/v310/uboot_linaro/u-boot-linaro/arch/arm/lib/eabi_compat.o -L /usr/v310/toolchain/gcc-arm-none-eabi-4_6-2012q2/bin/../lib/gcc/arm-none-eabi/4.6.2 -lgcc -Map u-boot.map -o u-boot make[1]: *** [u-boot] Error 139
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
participants (2)
-
Hsin-Hsiang Tseng -
Peter Barada