[U-Boot] [PATCH] video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before
Boards can skip display interface init using board_video_skip(). If display interface was not initialized (e.g. no ipuv3 framebuffer registered or IPU clock disabled), booting Linux stops due to the crash in IPU shutdown function, when accessing IPU registers. Check IPU clock and skip shutdown if clock is not enabled.
Signed-off-by: Anatolij Gustschin agust@denx.de --- drivers/video/mxc_ipuv3_fb.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index 0d0a0a9..8836229 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -13,6 +13,7 @@
#include <common.h> #include <linux/errno.h> +#include <asm/arch/crm_regs.h> #include <asm/global_data.h> #include <linux/string.h> #include <linux/list.h> @@ -568,8 +569,18 @@ err0:
void ipuv3_fb_shutdown(void) { - int i; + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; struct ipu_stat *stat = (struct ipu_stat *)IPU_STAT; + u32 reg; + int i; + + /* + * Check if IPU clock was enabled before. Won't access + * IPU registers if clock is not enabled. + */ + reg = readl(&mxc_ccm->CCGR3); + if ((reg & MXC_CCM_CCGR3_IPU1_IPU_MASK) == 0) + return;
for (i = 0; i < ARRAY_SIZE(mxcfb_info); i++) { struct fb_info *fbi = mxcfb_info[i];
Hi Anatolij,
On Fri, Aug 25, 2017 at 10:10 AM, Anatolij Gustschin agust@denx.de wrote:
void ipuv3_fb_shutdown(void) {
int i;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; struct ipu_stat *stat = (struct ipu_stat *)IPU_STAT;u32 reg;int i;/** Check if IPU clock was enabled before. Won't access* IPU registers if clock is not enabled.*/reg = readl(&mxc_ccm->CCGR3);if ((reg & MXC_CCM_CCGR3_IPU1_IPU_MASK) == 0)return;
Maybe you could also check whether IPU2 has been enabled?
Hi Fabio,
On Mon, 28 Aug 2017 13:22:19 -0300 Fabio Estevam festevam@gmail.com wrote: ...
/** Check if IPU clock was enabled before. Won't access* IPU registers if clock is not enabled.*/reg = readl(&mxc_ccm->CCGR3);if ((reg & MXC_CCM_CCGR3_IPU1_IPU_MASK) == 0)return;Maybe you could also check whether IPU2 has been enabled?
currently IPU2 is not used, the driver never enables it. I checked it when preparing this patch.
Thanks, Anatolij
Hi Anatolji,
On 25/08/2017 15:10, Anatolij Gustschin wrote:
Boards can skip display interface init using board_video_skip(). If display interface was not initialized (e.g. no ipuv3 framebuffer registered or IPU clock disabled), booting Linux stops due to the crash in IPU shutdown function, when accessing IPU registers. Check IPU clock and skip shutdown if clock is not enabled.
Signed-off-by: Anatolij Gustschin agust@denx.de
drivers/video/mxc_ipuv3_fb.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index 0d0a0a9..8836229 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -13,6 +13,7 @@
#include <common.h> #include <linux/errno.h> +#include <asm/arch/crm_regs.h> #include <asm/global_data.h> #include <linux/string.h> #include <linux/list.h> @@ -568,8 +569,18 @@ err0:
void ipuv3_fb_shutdown(void) {
- int i;
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; struct ipu_stat *stat = (struct ipu_stat *)IPU_STAT;
- u32 reg;
- int i;
- /*
* Check if IPU clock was enabled before. Won't access* IPU registers if clock is not enabled.*/- reg = readl(&mxc_ccm->CCGR3);
- if ((reg & MXC_CCM_CCGR3_IPU1_IPU_MASK) == 0)
return;
It looks to me quite weak to simply check if clock is gated. On some board clock is gated even if IPU is not active. Do you have a way reading inside IPU itself ? Then we can better decide if it was really acrive. For example, checking if ipu_enable_channel() was called (and DMA registers are set).
Best regards, Stefano
Hi Stefano,
On Mon, 28 Aug 2017 18:54:39 +0200 Stefano Babic sbabic@denx.de wrote: ...
- /*
* Check if IPU clock was enabled before. Won't access* IPU registers if clock is not enabled.*/- reg = readl(&mxc_ccm->CCGR3);
- if ((reg & MXC_CCM_CCGR3_IPU1_IPU_MASK) == 0)
return;It looks to me quite weak to simply check if clock is gated. On some board clock is gated even if IPU is not active. Do you have a way reading inside IPU itself ? Then we can better decide if it was really acrive. For example, checking if ipu_enable_channel() was called (and DMA registers are set).
we cannot access IPU registers when IPU clock is disabled (register access will hang the CPU).
Thanks, Anatolij
participants (3)
-
Anatolij Gustschin -
Fabio Estevam -
Stefano Babic