[U-Boot] [PATCH 0/3] arm64: zynqmp: Add support for Versal system controller
Hi,
these patches are adding support for System controller on Versal board which is capable to monitor and talk to Versal device.
Thanks, Michal
Michal Simek (3): arm64: zynqmp: Add generic a2197 system controller config arm64: zynqmp: Add System Controller for a2197-g/p arm64: zynqmp: Add a2197 memory board revA
arch/arm/dts/Makefile | 4 + arch/arm/dts/zynqmp-a2197-g-revA.dts | 282 ++++ arch/arm/dts/zynqmp-a2197-m-revA.dts | 461 +++++++ arch/arm/dts/zynqmp-a2197-p-revA.dts | 567 ++++++++ arch/arm/dts/zynqmp-a2197-revA.dts | 89 ++ board/xilinx/zynqmp/zynqmp-a2197-g-revA | 1 + board/xilinx/zynqmp/zynqmp-a2197-m-revA | 1 + board/xilinx/zynqmp/zynqmp-a2197-p-revA | 1 + .../zynqmp/zynqmp-a2197-revA/psu_init_gpl.c | 1171 +++++++++++++++++ configs/xilinx_zynqmp_a2197_g_revA_defconfig | 116 ++ configs/xilinx_zynqmp_a2197_m_revA_defconfig | 116 ++ configs/xilinx_zynqmp_a2197_p_revA_defconfig | 117 ++ configs/xilinx_zynqmp_a2197_revA_defconfig | 118 ++ 13 files changed, 3044 insertions(+) create mode 100644 arch/arm/dts/zynqmp-a2197-g-revA.dts create mode 100644 arch/arm/dts/zynqmp-a2197-m-revA.dts create mode 100644 arch/arm/dts/zynqmp-a2197-p-revA.dts create mode 100644 arch/arm/dts/zynqmp-a2197-revA.dts create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-g-revA create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-m-revA create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-p-revA create mode 100644 board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c create mode 100644 configs/xilinx_zynqmp_a2197_g_revA_defconfig create mode 100644 configs/xilinx_zynqmp_a2197_m_revA_defconfig create mode 100644 configs/xilinx_zynqmp_a2197_p_revA_defconfig create mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig
Add generic configuration for a2197-p/-m/-g boards.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-a2197-revA.dts | 89 ++ .../zynqmp/zynqmp-a2197-revA/psu_init_gpl.c | 1171 +++++++++++++++++ configs/xilinx_zynqmp_a2197_revA_defconfig | 117 ++ 4 files changed, 1378 insertions(+) create mode 100644 arch/arm/dts/zynqmp-a2197-revA.dts create mode 100644 board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c create mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index aac1b83d4938..9d55bd6e2669 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -247,6 +247,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultra96-rev1.dtb \ avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \ + zynqmp-a2197-revA.dtb \ zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ diff --git a/arch/arm/dts/zynqmp-a2197-revA.dts b/arch/arm/dts/zynqmp-a2197-revA.dts new file mode 100644 index 000000000000..315313854254 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-revA.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek michal.simek@xilinx.com + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 board RevA"; + compatible = "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + i2c0 = &i2c0; + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom1 &eeprom0 &eeprom0>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&i2c0 { + status = "okay"; + u-boot,dm-pre-reloc; + clock-frequency = <400000>; + i2c-mux@74 { /* this cover MGT board */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + u-boot,dm-pre-reloc; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom0: eeprom@50 { /* u96 - 24LC32A - 256B */ + compatible = "atmel,24c32"; + u-boot,dm-pre-reloc; + reg = <0x50>; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + u-boot,dm-pre-reloc; + clock-frequency = <400000>; + i2c-mux@74 { /* This cover processor board */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + u-boot,dm-pre-reloc; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom1: eeprom@50 { /* u96 - 24LC32A - 256B */ + compatible = "atmel,24c32"; + u-boot,dm-pre-reloc; + reg = <0x50>; + }; + }; + }; +}; diff --git a/board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c new file mode 100644 index 000000000000..ac4a073e1bc3 --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c @@ -0,0 +1,1171 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (c) Copyright 2015 Xilinx, Inc. All rights reserved. + */ + +#include <asm/arch/psu_init_gpl.h> +#include <xil_io.h> + +static unsigned long psu_pll_init_data(void) +{ + psu_mask_write(0xFF5E0034, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFF5E0030, 0x00717F00U, 0x00014000U); + psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000008U); + psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000000U); + mask_poll(0xFF5E0040, 0x00000002U); + psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000000U); + psu_mask_write(0xFF5E0048, 0x00003F00U, 0x00000200U); + psu_mask_write(0xFF5E0038, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012300U); + psu_mask_write(0xFF5E0024, 0xFE7FEDEFU, 0x7E4B0C82U); + psu_mask_write(0xFF5E0020, 0x00717F00U, 0x00015A00U); + psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000008U); + psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000000U); + mask_poll(0xFF5E0040, 0x00000001U); + psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000000U); + psu_mask_write(0xFF5E0044, 0x00003F00U, 0x00000300U); + psu_mask_write(0xFF5E0028, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFD1A0024, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFD1A0020, 0x00717F00U, 0x00014800U); + psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000000U); + mask_poll(0xFD1A0044, 0x00000001U); + psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000000U); + psu_mask_write(0xFD1A0048, 0x00003F00U, 0x00000300U); + psu_mask_write(0xFD1A0028, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFD1A0030, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFD1A002C, 0x00717F00U, 0x00014000U); + psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000000U); + mask_poll(0xFD1A0044, 0x00000002U); + psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000000U); + psu_mask_write(0xFD1A004C, 0x00003F00U, 0x00000200U); + psu_mask_write(0xFD1A0034, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFD1A003C, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFD1A0038, 0x00717F00U, 0x00014000U); + psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000000U); + mask_poll(0xFD1A0044, 0x00000004U); + psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000000U); + psu_mask_write(0xFD1A0050, 0x00003F00U, 0x00000200U); + psu_mask_write(0xFD1A0040, 0x8000FFFFU, 0x00000000U); + + return 1; +} + +static unsigned long psu_clock_init_data(void) +{ + psu_mask_write(0xFF5E0050, 0x063F3F07U, 0x06010C00U); + psu_mask_write(0xFF180360, 0x00000003U, 0x00000001U); + psu_mask_write(0xFF180308, 0x00000006U, 0x00000006U); + psu_mask_write(0xFF5E0100, 0x013F3F07U, 0x01010600U); + psu_mask_write(0xFF5E0060, 0x023F3F07U, 0x02010600U); + psu_mask_write(0xFF5E0064, 0x023F3F07U, 0x02010600U); + psu_mask_write(0xFF5E004C, 0x023F3F07U, 0x02031900U); + psu_mask_write(0xFF5E006C, 0x013F3F07U, 0x01010800U); + psu_mask_write(0xFF5E0070, 0x013F3F07U, 0x01010800U); + psu_mask_write(0xFF18030C, 0x00020003U, 0x00000000U); + psu_mask_write(0xFF5E0074, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0078, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0120, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0124, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0090, 0x01003F07U, 0x01000302U); + psu_mask_write(0xFF5E009C, 0x01003F07U, 0x01000400U); + psu_mask_write(0xFF5E00A4, 0x01003F07U, 0x01000800U); + psu_mask_write(0xFF5E00A8, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFF5E00AC, 0x01003F07U, 0x01000F02U); + psu_mask_write(0xFF5E00B0, 0x01003F07U, 0x01000602U); + psu_mask_write(0xFF5E00B8, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFF5E00C0, 0x013F3F07U, 0x01010B02U); + psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01011E02U); + psu_mask_write(0xFF5E0104, 0x00000007U, 0x00000000U); + psu_mask_write(0xFF5E0128, 0x01003F07U, 0x01000104U); + psu_mask_write(0xFD1A0060, 0x03003F07U, 0x03000100U); + psu_mask_write(0xFD1A0068, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFD1A0080, 0x00003F07U, 0x00000200U); + psu_mask_write(0xFD1A0084, 0x07003F07U, 0x07000100U); + psu_mask_write(0xFD1A00B8, 0x01003F07U, 0x01000203U); + psu_mask_write(0xFD1A00BC, 0x01003F07U, 0x01000203U); + psu_mask_write(0xFD1A00C0, 0x01003F07U, 0x01000202U); + psu_mask_write(0xFD1A00C4, 0x01003F07U, 0x01000502U); + psu_mask_write(0xFD1A00F8, 0x00003F07U, 0x00000200U); + psu_mask_write(0xFF180380, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD610100, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF180300, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF410050, 0x00000001U, 0x00000000U); + + return 1; +} + +static unsigned long psu_ddr_init_data(void) +{ + psu_mask_write(0xFD1A0108, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD070000, 0xE30FBE3DU, 0xC1081020U); + psu_mask_write(0xFD070010, 0x8000F03FU, 0x00000030U); + psu_mask_write(0xFD070020, 0x000003F3U, 0x00000202U); + psu_mask_write(0xFD070024, 0xFFFFFFFFU, 0x00516120U); + psu_mask_write(0xFD070030, 0x0000007FU, 0x00000008U); + psu_mask_write(0xFD070034, 0x00FFFF1FU, 0x00408410U); + psu_mask_write(0xFD070050, 0x00F1F1F4U, 0x00210000U); + psu_mask_write(0xFD070054, 0x0FFF0FFFU, 0x00000000U); + psu_mask_write(0xFD070060, 0x00000073U, 0x00000001U); + psu_mask_write(0xFD070064, 0x0FFF83FFU, 0x00418096U); + psu_mask_write(0xFD070070, 0x00000017U, 0x00000010U); + psu_mask_write(0xFD070074, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD0700C4, 0x3F000391U, 0x10000200U); + psu_mask_write(0xFD0700C8, 0x01FF1F3FU, 0x0030051FU); + psu_mask_write(0xFD0700D0, 0xC3FF0FFFU, 0x00030413U); + psu_mask_write(0xFD0700D4, 0x01FF7F0FU, 0x006A0000U); + psu_mask_write(0xFD0700D8, 0x0000FF0FU, 0x00002305U); + psu_mask_write(0xFD0700DC, 0xFFFFFFFFU, 0x00440024U); + psu_mask_write(0xFD0700E0, 0xFFFFFFFFU, 0x00310008U); + psu_mask_write(0xFD0700E4, 0x00FF03FFU, 0x00210004U); + psu_mask_write(0xFD0700E8, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD0700EC, 0xFFFF0000U, 0x00000000U); + psu_mask_write(0xFD0700F0, 0x0000003FU, 0x00000010U); + psu_mask_write(0xFD0700F4, 0x00000FFFU, 0x0000077FU); + psu_mask_write(0xFD070100, 0x7F3F7F3FU, 0x15161117U); + psu_mask_write(0xFD070104, 0x001F1F7FU, 0x00040422U); + psu_mask_write(0xFD070108, 0x3F3F3F3FU, 0x060C1310U); + psu_mask_write(0xFD07010C, 0x3FF3F3FFU, 0x00F08000U); + psu_mask_write(0xFD070110, 0x1F0F0F1FU, 0x0A04060CU); + psu_mask_write(0xFD070114, 0x0F0F3F1FU, 0x01040808U); + psu_mask_write(0xFD070118, 0x0F0F000FU, 0x01010005U); + psu_mask_write(0xFD07011C, 0x00000F0FU, 0x00000401U); + psu_mask_write(0xFD070120, 0x7F7F7F7FU, 0x04040606U); + psu_mask_write(0xFD070124, 0x40070F3FU, 0x0004040DU); + psu_mask_write(0xFD07012C, 0x7F1F031FU, 0x440C011CU); + psu_mask_write(0xFD070130, 0x00030F1FU, 0x00020608U); + psu_mask_write(0xFD070180, 0xF7FF03FFU, 0x82160010U); + psu_mask_write(0xFD070184, 0x3FFFFFFFU, 0x01B65B96U); + psu_mask_write(0xFD070190, 0x1FBFBF3FU, 0x0495820AU); + psu_mask_write(0xFD070194, 0xF31F0F0FU, 0x00030304U); + psu_mask_write(0xFD070198, 0x0FF1F1F1U, 0x07000101U); + psu_mask_write(0xFD07019C, 0x000000F1U, 0x00000021U); + psu_mask_write(0xFD0701A0, 0xC3FF03FFU, 0x83FF0003U); + psu_mask_write(0xFD0701A4, 0x00FF00FFU, 0x00C800FFU); + psu_mask_write(0xFD0701B0, 0x00000007U, 0x00000004U); + psu_mask_write(0xFD0701B4, 0x00003F3FU, 0x00001308U); + psu_mask_write(0xFD0701C0, 0x00000007U, 0x00000001U); + psu_mask_write(0xFD070200, 0x0000001FU, 0x0000001FU); + psu_mask_write(0xFD070204, 0x001F1F1FU, 0x00070707U); + psu_mask_write(0xFD070208, 0x0F0F0F0FU, 0x00000000U); + psu_mask_write(0xFD07020C, 0x0F0F0F0FU, 0x0F000000U); + psu_mask_write(0xFD070210, 0x00000F0FU, 0x00000F0FU); + psu_mask_write(0xFD070214, 0x0F0F0F0FU, 0x060F0606U); + psu_mask_write(0xFD070218, 0x8F0F0F0FU, 0x06060606U); + psu_mask_write(0xFD07021C, 0x00000F0FU, 0x00000F0FU); + psu_mask_write(0xFD070220, 0x00001F1FU, 0x00000000U); + psu_mask_write(0xFD070224, 0x0F0F0F0FU, 0x06060606U); + psu_mask_write(0xFD070228, 0x0F0F0F0FU, 0x06060606U); + psu_mask_write(0xFD07022C, 0x0000000FU, 0x00000006U); + psu_mask_write(0xFD070240, 0x0F1F0F7CU, 0x04000400U); + psu_mask_write(0xFD070244, 0x00003333U, 0x00000000U); + psu_mask_write(0xFD070250, 0x7FFF3F07U, 0x01002001U); + psu_mask_write(0xFD070264, 0xFF00FFFFU, 0x08000040U); + psu_mask_write(0xFD07026C, 0xFF00FFFFU, 0x08000040U); + psu_mask_write(0xFD070280, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD070284, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD070288, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD07028C, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD070290, 0x0000FFFFU, 0x00000000U); + psu_mask_write(0xFD070294, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070300, 0x00000011U, 0x00000000U); + psu_mask_write(0xFD07030C, 0x80000033U, 0x00000000U); + psu_mask_write(0xFD070320, 0x00000001U, 0x00000000U); + psu_mask_write(0xFD070400, 0x00000111U, 0x00000001U); + psu_mask_write(0xFD070404, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070408, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070490, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070494, 0x0033000FU, 0x0020000BU); + psu_mask_write(0xFD070498, 0x07FF07FFU, 0x00000000U); + psu_mask_write(0xFD0704B4, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0704B8, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070540, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070544, 0x03330F0FU, 0x02000B03U); + psu_mask_write(0xFD070548, 0x07FF07FFU, 0x00000000U); + psu_mask_write(0xFD070564, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070568, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0705F0, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD0705F4, 0x03330F0FU, 0x02000B03U); + psu_mask_write(0xFD0705F8, 0x07FF07FFU, 0x00000000U); + psu_mask_write(0xFD070614, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070618, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0706A0, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD0706A4, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD0706A8, 0x07FF07FFU, 0x0000004FU); + psu_mask_write(0xFD0706AC, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD0706B0, 0x000007FFU, 0x0000004FU); + psu_mask_write(0xFD0706C4, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0706C8, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070750, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070754, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070758, 0x07FF07FFU, 0x0000004FU); + psu_mask_write(0xFD07075C, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070760, 0x000007FFU, 0x0000004FU); + psu_mask_write(0xFD070774, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070778, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070800, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070804, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070808, 0x07FF07FFU, 0x0000004FU); + psu_mask_write(0xFD07080C, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070810, 0x000007FFU, 0x0000004FU); + psu_mask_write(0xFD070F04, 0x000001FFU, 0x00000000U); + psu_mask_write(0xFD070F08, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD070F0C, 0x000001FFU, 0x00000010U); + psu_mask_write(0xFD070F10, 0x000000FFU, 0x0000000FU); + psu_mask_write(0xFD072190, 0x1FBFBF3FU, 0x07828002U); + psu_mask_write(0xFD1A0108, 0x0000000CU, 0x00000000U); + psu_mask_write(0xFD080010, 0xFFFFFFFFU, 0x87001E00U); + psu_mask_write(0xFD080018, 0xFFFFFFFFU, 0x00F07E38U); + psu_mask_write(0xFD08001C, 0xFFFFFFFFU, 0x55AA5480U); + psu_mask_write(0xFD080024, 0xFFFFFFFFU, 0x010100F4U); + psu_mask_write(0xFD080040, 0xFFFFFFFFU, 0x42C21590U); + psu_mask_write(0xFD080044, 0xFFFFFFFFU, 0xD05512C0U); + psu_mask_write(0xFD080068, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD080090, 0xFFFFFFFFU, 0x02A04161U); + psu_mask_write(0xFD0800C0, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD0800C4, 0xFFFFFFFFU, 0x000000DDU); + psu_mask_write(0xFD080100, 0xFFFFFFFFU, 0x0000040DU); + psu_mask_write(0xFD080110, 0xFFFFFFFFU, 0x0B2E1708U); + psu_mask_write(0xFD080114, 0xFFFFFFFFU, 0x282B0510U); + psu_mask_write(0xFD080118, 0xFFFFFFFFU, 0x000F0133U); + psu_mask_write(0xFD08011C, 0xFFFFFFFFU, 0x82000501U); + psu_mask_write(0xFD080120, 0xFFFFFFFFU, 0x012B2B0BU); + psu_mask_write(0xFD080124, 0xFFFFFFFFU, 0x0044260BU); + psu_mask_write(0xFD080128, 0xFFFFFFFFU, 0x00000C18U); + psu_mask_write(0xFD080140, 0xFFFFFFFFU, 0x08400020U); + psu_mask_write(0xFD080144, 0xFFFFFFFFU, 0x00000C80U); + psu_mask_write(0xFD080150, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080154, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080180, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080184, 0xFFFFFFFFU, 0x00000044U); + psu_mask_write(0xFD080188, 0xFFFFFFFFU, 0x00000024U); + psu_mask_write(0xFD08018C, 0xFFFFFFFFU, 0x00000031U); + psu_mask_write(0xFD080190, 0xFFFFFFFFU, 0x00000008U); + psu_mask_write(0xFD080194, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080198, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD0801AC, 0xFFFFFFFFU, 0x00000056U); + psu_mask_write(0xFD0801B0, 0xFFFFFFFFU, 0x00000021U); + psu_mask_write(0xFD0801B4, 0xFFFFFFFFU, 0x00000008U); + psu_mask_write(0xFD0801B8, 0xFFFFFFFFU, 0x00000019U); + psu_mask_write(0xFD0801D8, 0xFFFFFFFFU, 0x00000016U); + psu_mask_write(0xFD080200, 0xFFFFFFFFU, 0x800091C7U); + psu_mask_write(0xFD080204, 0xFFFFFFFFU, 0x00010236U); + psu_mask_write(0xFD080240, 0xFFFFFFFFU, 0x00141054U); + psu_mask_write(0xFD080250, 0xFFFFFFFFU, 0x00088000U); + psu_mask_write(0xFD080414, 0xFFFFFFFFU, 0x12340800U); + psu_mask_write(0xFD0804F4, 0xFFFFFFFFU, 0x0000000AU); + psu_mask_write(0xFD080500, 0xFFFFFFFFU, 0x30000028U); + psu_mask_write(0xFD080508, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD08050C, 0xFFFFFFFFU, 0x00000005U); + psu_mask_write(0xFD080510, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080520, 0xFFFFFFFFU, 0x0300BD99U); + psu_mask_write(0xFD080528, 0xFFFFFFFFU, 0xF1032019U); + psu_mask_write(0xFD08052C, 0xFFFFFFFFU, 0x07F001E3U); + psu_mask_write(0xFD080544, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080548, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080558, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD08055C, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080560, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080564, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080680, 0xFFFFFFFFU, 0x008AAC58U); + psu_mask_write(0xFD080684, 0xFFFFFFFFU, 0x0001B39BU); + psu_mask_write(0xFD080694, 0xFFFFFFFFU, 0x01E10210U); + psu_mask_write(0xFD080698, 0xFFFFFFFFU, 0x01E10000U); + psu_mask_write(0xFD0806A4, 0xFFFFFFFFU, 0x0001BB9BU); + psu_mask_write(0xFD080700, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080704, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD08070C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080710, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080714, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080718, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080800, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080804, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD08080C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080810, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080814, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080818, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080900, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080904, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD08090C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080910, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080914, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080918, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080A00, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080A04, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD080A0C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080A10, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080A14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080A18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080B00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080B04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080B08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080B0C, 0xFFFFFFFFU, 0x0129A4A4U); + psu_mask_write(0xFD080B10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080B14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080B18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080C00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080C04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080C08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080C0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080C10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080C14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080C18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080D00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080D04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080D08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080D0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080D10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080D14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080D18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080E00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080E04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080E08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080E0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080E10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080E14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080E18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080F00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080F04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080F08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080F0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080F10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080F14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080F18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD081400, 0xFFFFFFFFU, 0x2A019FFEU); + psu_mask_write(0xFD081404, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD08141C, 0xFFFFFFFFU, 0x01264300U); + psu_mask_write(0xFD08142C, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD081430, 0xFFFFFFFFU, 0x71000000U); + psu_mask_write(0xFD081440, 0xFFFFFFFFU, 0x2A019FFEU); + psu_mask_write(0xFD081444, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD08145C, 0xFFFFFFFFU, 0x01264300U); + psu_mask_write(0xFD08146C, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD081470, 0xFFFFFFFFU, 0x71000000U); + psu_mask_write(0xFD081480, 0xFFFFFFFFU, 0x15019FFEU); + psu_mask_write(0xFD081484, 0xFFFFFFFFU, 0x21100000U); + psu_mask_write(0xFD08149C, 0xFFFFFFFFU, 0x01266300U); + psu_mask_write(0xFD0814AC, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD0814B0, 0xFFFFFFFFU, 0x70400000U); + psu_mask_write(0xFD0814C0, 0xFFFFFFFFU, 0x15019FFEU); + psu_mask_write(0xFD0814C4, 0xFFFFFFFFU, 0x21100000U); + psu_mask_write(0xFD0814DC, 0xFFFFFFFFU, 0x01266300U); + psu_mask_write(0xFD0814EC, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD0814F0, 0xFFFFFFFFU, 0x70400000U); + psu_mask_write(0xFD081500, 0xFFFFFFFFU, 0x15019FFEU); + psu_mask_write(0xFD081504, 0xFFFFFFFFU, 0x21100000U); + psu_mask_write(0xFD08151C, 0xFFFFFFFFU, 0x01266300U); + psu_mask_write(0xFD08152C, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD081530, 0xFFFFFFFFU, 0x70400000U); + psu_mask_write(0xFD0817C4, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD0817DC, 0xFFFFFFFFU, 0x012643C4U); + + return 1; +} + +static unsigned long psu_ddr_qos_init_data(void) +{ + return 1; +} + +static unsigned long psu_mio_init_data(void) +{ + psu_mask_write(0xFF180034, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180038, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF18003C, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180040, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180044, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180048, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF18004C, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180050, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180054, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180058, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF18005C, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180088, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF18008C, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF180090, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF180094, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF180098, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF18009C, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF1800A0, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF1800A4, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF1800B4, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800B8, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800BC, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800C0, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800C4, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800C8, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800CC, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800D0, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800D4, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800D8, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800DC, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800E0, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800E4, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800E8, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800EC, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800F0, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800F4, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800F8, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800FC, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180100, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180104, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180108, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF18010C, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180110, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180114, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180118, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF18011C, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180120, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180124, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180128, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180130, 0x000000FEU, 0x00000060U); + psu_mask_write(0xFF180134, 0x000000FEU, 0x00000060U); + psu_mask_write(0xFF180204, 0x00FFE000U, 0x00000000U); + psu_mask_write(0xFF180208, 0xFFFFE3FCU, 0x00B02240U); + psu_mask_write(0xFF18020C, 0x00003FFFU, 0x0000000BU); + psu_mask_write(0xFF180138, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF18013C, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180140, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180144, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180148, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF18014C, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180154, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180158, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF18015C, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180160, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180164, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180168, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180170, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180174, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180178, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF18017C, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180180, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180184, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180200, 0x0000000FU, 0x00000000U); + + return 1; +} + +static unsigned long psu_peripherals_pre_init_data(void) +{ + psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012302U); + + return 1; +} + +static unsigned long psu_peripherals_init_data(void) +{ + psu_mask_write(0xFD1A0100, 0x0000007CU, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U); + psu_mask_write(0xFF5E0230, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00000C00U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000060U, 0x00000000U); + psu_mask_write(0xFF180310, 0x00008001U, 0x00000001U); + psu_mask_write(0xFF180320, 0x33843384U, 0x00801284U); + psu_mask_write(0xFF18031C, 0x00007FFEU, 0x00006450U); + psu_mask_write(0xFF180358, 0x00080000U, 0x00080000U); + psu_mask_write(0xFF18031C, 0x7FFE0000U, 0x64500000U); + psu_mask_write(0xFF180358, 0x00000008U, 0x00000008U); + psu_mask_write(0xFF180324, 0x000003C0U, 0x00000000U); + psu_mask_write(0xFF180324, 0x03C00000U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000600U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000006U, 0x00000000U); + psu_mask_write(0xFF000034, 0x000000FFU, 0x00000005U); + psu_mask_write(0xFF000018, 0x0000FFFFU, 0x0000008FU); + psu_mask_write(0xFF000000, 0x000001FFU, 0x00000017U); + psu_mask_write(0xFF000004, 0x000003FFU, 0x00000020U); + psu_mask_write(0xFF010034, 0x000000FFU, 0x00000005U); + psu_mask_write(0xFF010018, 0x0000FFFFU, 0x0000008FU); + psu_mask_write(0xFF010000, 0x000001FFU, 0x00000017U); + psu_mask_write(0xFF010004, 0x000003FFU, 0x00000020U); + psu_mask_write(0xFF5E0238, 0x00040000U, 0x00000000U); + psu_mask_write(0xFF4B0024, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFFCA5000, 0x00001FFFU, 0x00000000U); + psu_mask_write(0xFD5C0060, 0x000F000FU, 0x00000000U); + psu_mask_write(0xFFA60040, 0x80000000U, 0x80000000U); + psu_mask_write(0xFF260020, 0xFFFFFFFFU, 0x01FC9F08U); + psu_mask_write(0xFF260000, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + + mask_delay(1); + psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000002U); + + mask_delay(5); + psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + + return 1; +} + +static unsigned long psu_serdes_init_data(void) +{ + psu_mask_write(0xFD410000, 0x0000001FU, 0x0000000FU); + psu_mask_write(0xFD410004, 0x0000001FU, 0x00000008U); + psu_mask_write(0xFD402860, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD402864, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD406094, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD406368, 0x000000FFU, 0x00000038U); + psu_mask_write(0xFD40636C, 0x00000007U, 0x00000003U); + psu_mask_write(0xFD406370, 0x000000FFU, 0x000000F4U); + psu_mask_write(0xFD406374, 0x000000FFU, 0x00000031U); + psu_mask_write(0xFD406378, 0x000000FFU, 0x00000002U); + psu_mask_write(0xFD40637C, 0x00000033U, 0x00000030U); + psu_mask_write(0xFD40106C, 0x0000000FU, 0x0000000FU); + psu_mask_write(0xFD4000F4, 0x0000000BU, 0x0000000BU); + psu_mask_write(0xFD40506C, 0x00000003U, 0x00000003U); + psu_mask_write(0xFD4040F4, 0x00000003U, 0x00000003U); + psu_mask_write(0xFD4050CC, 0x00000020U, 0x00000020U); + psu_mask_write(0xFD401074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD405074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD409074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40D074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40189C, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD4018F8, 0x000000FFU, 0x0000007DU); + psu_mask_write(0xFD4018FC, 0x000000FFU, 0x0000007DU); + psu_mask_write(0xFD401990, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD401924, 0x000000FFU, 0x00000082U); + psu_mask_write(0xFD401928, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD401900, 0x000000FFU, 0x00000064U); + psu_mask_write(0xFD40192C, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD401980, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401914, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401918, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD401940, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401944, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD401994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40589C, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD4058F8, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD4058FC, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD405990, 0x000000FFU, 0x00000010U); + psu_mask_write(0xFD405924, 0x000000FFU, 0x000000FEU); + psu_mask_write(0xFD405928, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD405900, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD40592C, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD405980, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD405914, 0x000000FFU, 0x000000F7U); + psu_mask_write(0xFD405918, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD405940, 0x000000FFU, 0x000000F7U); + psu_mask_write(0xFD405944, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD405994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD409994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40D994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40107C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40507C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40907C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40D07C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD4019A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40102C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4059A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD405038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40502C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4099A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD409038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40902C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40D9A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD40D038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40D02C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4019AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD4059AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD4099AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD40D9AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD401978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD405978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD409978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40D978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD410010, 0x00000077U, 0x00000035U); + psu_mask_write(0xFD410040, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD410044, 0x00000003U, 0x00000000U); + + return 1; +} + +static unsigned long psu_resetout_init_data(void) +{ + psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U); + psu_mask_write(0xFF9D0080, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF9D007C, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00000140U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00000800U, 0x00000000U); + psu_mask_write(0xFF9E0080, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF9E007C, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E023C, 0x00000280U, 0x00000000U); + psu_mask_write(0xFF5E0230, 0x00000001U, 0x00000000U); + psu_mask_write(0xFE20C200, 0x00023FFFU, 0x00022457U); + psu_mask_write(0xFE20C630, 0x003FFF00U, 0x00000000U); + psu_mask_write(0xFE20C11C, 0x00000600U, 0x00000600U); + psu_mask_write(0xFE20C12C, 0x00004000U, 0x00004000U); + psu_mask_write(0xFE30C200, 0x00023FFFU, 0x00022457U); + psu_mask_write(0xFE30C630, 0x003FFF00U, 0x00000000U); + psu_mask_write(0xFE30C12C, 0x00004000U, 0x00004000U); + psu_mask_write(0xFE30C11C, 0x00000400U, 0x00000400U); + psu_mask_write(0xFD480064, 0x00000200U, 0x00000200U); + mask_poll(0xFD4023E4, 0x00000010U); + mask_poll(0xFD4063E4, 0x00000010U); + + return 1; +} + +static unsigned long psu_resetin_init_data(void) +{ + psu_mask_write(0xFF5E023C, 0x00000540U, 0x00000540U); + psu_mask_write(0xFF5E023C, 0x00000A80U, 0x00000A80U); + psu_mask_write(0xFF5E0230, 0x00000001U, 0x00000001U); + + return 1; +} + +static unsigned long psu_afi_config(void) +{ + psu_mask_write(0xFD1A0100, 0x00001F80U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00080000U, 0x00000000U); + psu_mask_write(0xFF419000, 0x00000300U, 0x00000000U); + + return 1; +} + +static void dpll_prog(int ddr_pll_fbdiv, int d_lock_dly, int d_lock_cnt, + int d_lfhf, int d_cp, int d_res) +{ + unsigned int pll_ctrl_regval; + unsigned int pll_status_regval; + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00010000U); + pll_ctrl_regval = pll_ctrl_regval | (1 << 16); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0xFE000000U); + pll_ctrl_regval = pll_ctrl_regval | (d_lock_dly << 25); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x007FE000U); + pll_ctrl_regval = pll_ctrl_regval | (d_lock_cnt << 13); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000C00U); + pll_ctrl_regval = pll_ctrl_regval | (d_lfhf << 10); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x000001E0U); + pll_ctrl_regval = pll_ctrl_regval | (d_cp << 5); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x0000000FU); + pll_ctrl_regval = pll_ctrl_regval | (d_res << 0); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00007F00U); + pll_ctrl_regval = pll_ctrl_regval | (ddr_pll_fbdiv << 8); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000008U); + pll_ctrl_regval = pll_ctrl_regval | (1 << 3); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000001U); + pll_ctrl_regval = pll_ctrl_regval | (1 << 0); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000001U); + pll_ctrl_regval = pll_ctrl_regval | (0 << 0); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_status_regval = 0x00000000; + while ((pll_status_regval & 0x00000002U) != 0x00000002U) + pll_status_regval = Xil_In32(((0xFD1A0000U) + 0x00000044)); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000008U); + pll_ctrl_regval = pll_ctrl_regval | (0 << 3); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); +} + +static unsigned long psu_ddr_phybringup_data(void) +{ + unsigned int regval = 0; + + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + int cur_PLLCR0; + + cur_PLLCR0 = (Xil_In32(0xFD080068U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL0PLLCR0; + + cur_DX8SL0PLLCR0 = (Xil_In32(0xFD081404U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL1PLLCR0; + + cur_DX8SL1PLLCR0 = (Xil_In32(0xFD081444U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL2PLLCR0; + + cur_DX8SL2PLLCR0 = (Xil_In32(0xFD081484U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL3PLLCR0; + + cur_DX8SL3PLLCR0 = (Xil_In32(0xFD0814C4U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL4PLLCR0; + + cur_DX8SL4PLLCR0 = (Xil_In32(0xFD081504U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SLBPLLCR0; + + cur_DX8SLBPLLCR0 = (Xil_In32(0xFD0817C4U) & 0xFFFFFFFFU) >> 0x00000000U; + Xil_Out32(0xFD080068, 0x02120000); + Xil_Out32(0xFD081404, 0x02120000); + Xil_Out32(0xFD081444, 0x02120000); + Xil_Out32(0xFD081484, 0x02120000); + Xil_Out32(0xFD0814C4, 0x02120000); + Xil_Out32(0xFD081504, 0x02120000); + Xil_Out32(0xFD0817C4, 0x02120000); + int cur_fbdiv; + + cur_fbdiv = (Xil_In32(0xFD1A002CU) & 0x00007F00U) >> 0x00000008U; + dpll_prog(48, 63, 625, 3, 3, 2); + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + unsigned int pll_retry = 10; + unsigned int pll_locked = 0; + + while ((pll_retry > 0) && (!pll_locked)) { + Xil_Out32(0xFD080004, 0x00040010); + Xil_Out32(0xFD080004, 0x00040011); + + while ((Xil_In32(0xFD080030) & 0x1) != 1) + ; + pll_locked = (Xil_In32(0xFD080030) & 0x80000000) + >> 31; + pll_locked &= (Xil_In32(0xFD0807E0) & 0x10000) + >> 16; + pll_locked &= (Xil_In32(0xFD0809E0) & 0x10000) + >> 16; + pll_retry--; + } + Xil_Out32(0xFD0800C4, Xil_In32(0xFD0800C4) | (pll_retry << 16)); + if (!pll_locked) + return (0); + + Xil_Out32(0xFD080004U, 0x00040063U); + + while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU) + ; + prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); + + while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU) + ; + Xil_Out32(0xFD070010U, 0x80000018U); + Xil_Out32(0xFD0701B0U, 0x00000005U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000331U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000B36U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000C21U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000E19U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00001616U); + Xil_Out32(0xFD070010U, 0x80000018U); + Xil_Out32(0xFD070010U, 0x80000010U); + Xil_Out32(0xFD0701B0U, 0x00000005U); + Xil_Out32(0xFD070320U, 0x00000001U); + while ((Xil_In32(0xFD070004U) & 0x0000000FU) != 0x00000001U) + ; + prog_reg(0xFD0701B0U, 0x00000001U, 0x00000000U, 0x00000000U); + prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U); + prog_reg(0xFD080028U, 0x00000001U, 0x00000000U, 0x00000001U); + prog_reg(0xFD080004U, 0x20000000U, 0x0000001DU, 0x00000001U); + prog_reg(0xFD08016CU, 0x00000004U, 0x00000002U, 0x00000001U); + prog_reg(0xFD080168U, 0x000000F0U, 0x00000004U, 0x00000007U); + prog_reg(0xFD080168U, 0x00000F00U, 0x00000008U, 0x00000002U); + prog_reg(0xFD080168U, 0x0000000FU, 0x00000000U, 0x00000001U); + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + + Xil_Out32(0xFD080068, cur_PLLCR0); + Xil_Out32(0xFD081404, cur_DX8SL0PLLCR0); + Xil_Out32(0xFD081444, cur_DX8SL1PLLCR0); + Xil_Out32(0xFD081484, cur_DX8SL2PLLCR0); + Xil_Out32(0xFD0814C4, cur_DX8SL3PLLCR0); + Xil_Out32(0xFD081504, cur_DX8SL4PLLCR0); + Xil_Out32(0xFD0817C4, cur_DX8SLBPLLCR0); + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + + dpll_prog(cur_fbdiv, 63, 625, 3, 3, 2); + for (int tp = 0; tp < 2000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080004U, 0x20000000U, 0x0000001DU, 0x00000000U); + prog_reg(0xFD080004U, 0x00040000U, 0x00000012U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000040U, 0x00000006U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000020U, 0x00000005U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000010U, 0x00000004U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); + + while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU) + ; + prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); + + while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU) + ; + for (int tp = 0; tp < 2000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080028U, 0x00000001U, 0x00000000U, 0x00000000U); + prog_reg(0xFD08016CU, 0x00000004U, 0x00000002U, 0x00000001U); + prog_reg(0xFD080168U, 0x000000F0U, 0x00000004U, 0x00000007U); + prog_reg(0xFD080168U, 0x00000F00U, 0x00000008U, 0x00000003U); + prog_reg(0xFD080168U, 0x0000000FU, 0x00000000U, 0x00000001U); + for (int tp = 0; tp < 2000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U); + Xil_Out32(0xFD080004, 0x0014FE01); + + regval = Xil_In32(0xFD080030); + while (regval != 0x8000007E) + regval = Xil_In32(0xFD080030); + + Xil_Out32(0xFD080200U, 0x000091C7U); + regval = Xil_In32(0xFD080030); + while (regval != 0x80008FFF) + regval = Xil_In32(0xFD080030); + + Xil_Out32(0xFD080200U, 0x800091C7U); + regval = ((Xil_In32(0xFD080030) & 0x1FFF0000) >> 18); + if (regval != 0) + return (0); + + Xil_Out32(0xFD080200U, 0x800091C7U); + int cur_R006_tREFPRD; + + cur_R006_tREFPRD = (Xil_In32(0xFD080018U) & 0x0003FFFFU) >> 0x00000000U; + prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD); + + prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000003U); + prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000003U); + + Xil_Out32(0xFD080004, 0x00060001); + regval = Xil_In32(0xFD080030); + while ((regval & 0x80004001) != 0x80004001) + regval = Xil_In32(0xFD080030); + + prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000000U); + prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000000U); + + Xil_Out32(0xFD080200U, 0x800091C7U); + prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD); + + Xil_Out32(0xFD080004, 0x0000C001); + regval = Xil_In32(0xFD080030); + while ((regval & 0x80000C01) != 0x80000C01) + regval = Xil_In32(0xFD080030); + + prog_reg(0xFD070320U, 0x00000001U, 0x00000000U, 0x00000000U); + prog_reg(0xFD0701B0U, 0x00000001U, 0x00000000U, 0x00000001U); + prog_reg(0xFD0701A0U, 0x80000000U, 0x0000001FU, 0x00000000U); + prog_reg(0xFD070320U, 0x00000001U, 0x00000000U, 0x00000001U); + Xil_Out32(0xFD070180U, 0x02160010U); + Xil_Out32(0xFD070060U, 0x00000000U); + prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U); + for (int tp = 0; tp < 4000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080090U, 0x00000FC0U, 0x00000006U, 0x00000007U); + prog_reg(0xFD080090U, 0x00000004U, 0x00000002U, 0x00000001U); + prog_reg(0xFD08070CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD08080CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD08090CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD080A0CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD080F0CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD080200U, 0x00000010U, 0x00000004U, 0x00000001U); + prog_reg(0xFD080250U, 0x00000002U, 0x00000001U, 0x00000000U); + prog_reg(0xFD080250U, 0x0000000CU, 0x00000002U, 0x00000001U); + prog_reg(0xFD080250U, 0x000000F0U, 0x00000004U, 0x00000000U); + prog_reg(0xFD080250U, 0x00300000U, 0x00000014U, 0x00000001U); + prog_reg(0xFD080250U, 0xF0000000U, 0x0000001CU, 0x00000002U); + prog_reg(0xFD08070CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD08080CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD08090CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080A0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080B0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080C0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080D0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080E0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080F0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080254U, 0x000000FFU, 0x00000000U, 0x00000001U); + prog_reg(0xFD080254U, 0x000F0000U, 0x00000010U, 0x0000000AU); + prog_reg(0xFD080250U, 0x00000001U, 0x00000000U, 0x00000001U); + + return 1; +} + +static int serdes_enb_coarse_saturation(void) +{ + Xil_Out32(0xFD402094, 0x00000010); + Xil_Out32(0xFD406094, 0x00000010); + Xil_Out32(0xFD40A094, 0x00000010); + Xil_Out32(0xFD40E094, 0x00000010); + return 1; +} + +static int serdes_fixcal_code(void) +{ + int maskstatus = 1; + unsigned int rdata = 0; + unsigned int match_pmos_code[23]; + unsigned int match_nmos_code[23]; + unsigned int match_ical_code[7]; + unsigned int match_rcal_code[7]; + unsigned int p_code = 0; + unsigned int n_code = 0; + unsigned int i_code = 0; + unsigned int r_code = 0; + unsigned int repeat_count = 0; + unsigned int L3_TM_CALIB_DIG20 = 0; + unsigned int L3_TM_CALIB_DIG19 = 0; + unsigned int L3_TM_CALIB_DIG18 = 0; + unsigned int L3_TM_CALIB_DIG16 = 0; + unsigned int L3_TM_CALIB_DIG15 = 0; + unsigned int L3_TM_CALIB_DIG14 = 0; + int i = 0, count = 0; + + rdata = Xil_In32(0xFD40289C); + rdata = rdata & ~0x03; + rdata = rdata | 0x1; + Xil_Out32(0xFD40289C, rdata); + + do { + if (count == 1100000) + break; + rdata = Xil_In32(0xFD402B1C); + count++; + } while ((rdata & 0x0000000E) != 0x0000000E); + + for (i = 0; i < 23; i++) { + match_pmos_code[i] = 0; + match_nmos_code[i] = 0; + } + for (i = 0; i < 7; i++) { + match_ical_code[i] = 0; + match_rcal_code[i] = 0; + } + + do { + Xil_Out32(0xFD410010, 0x00000000); + Xil_Out32(0xFD410014, 0x00000000); + + Xil_Out32(0xFD410010, 0x00000001); + Xil_Out32(0xFD410014, 0x00000000); + + maskstatus = mask_poll(0xFD40EF14, 0x2); + if (maskstatus == 0) { + xil_printf("#SERDES initialization timed out\n\r"); + return maskstatus; + } + + p_code = mask_read(0xFD40EF18, 0xFFFFFFFF); + n_code = mask_read(0xFD40EF1C, 0xFFFFFFFF); + ; + i_code = mask_read(0xFD40EF24, 0xFFFFFFFF); + r_code = mask_read(0xFD40EF28, 0xFFFFFFFF); + ; + + if (p_code >= 0x26 && p_code <= 0x3C) + match_pmos_code[p_code - 0x26] += 1; + + if (n_code >= 0x26 && n_code <= 0x3C) + match_nmos_code[n_code - 0x26] += 1; + + if (i_code >= 0xC && i_code <= 0x12) + match_ical_code[i_code - 0xC] += 1; + + if (r_code >= 0x6 && r_code <= 0xC) + match_rcal_code[r_code - 0x6] += 1; + + } while (repeat_count++ < 10); + + for (i = 0; i < 23; i++) { + if (match_pmos_code[i] >= match_pmos_code[0]) { + match_pmos_code[0] = match_pmos_code[i]; + p_code = 0x26 + i; + } + if (match_nmos_code[i] >= match_nmos_code[0]) { + match_nmos_code[0] = match_nmos_code[i]; + n_code = 0x26 + i; + } + } + + for (i = 0; i < 7; i++) { + if (match_ical_code[i] >= match_ical_code[0]) { + match_ical_code[0] = match_ical_code[i]; + i_code = 0xC + i; + } + if (match_rcal_code[i] >= match_rcal_code[0]) { + match_rcal_code[0] = match_rcal_code[i]; + r_code = 0x6 + i; + } + } + + L3_TM_CALIB_DIG20 = mask_read(0xFD40EC50, 0xFFFFFFF0); + L3_TM_CALIB_DIG20 = L3_TM_CALIB_DIG20 | 0x8 | ((p_code >> 2) & 0x7); + + L3_TM_CALIB_DIG19 = mask_read(0xFD40EC4C, 0xFFFFFF18); + L3_TM_CALIB_DIG19 = L3_TM_CALIB_DIG19 | ((p_code & 0x3) << 6) + | 0x20 | 0x4 | ((n_code >> 3) & 0x3); + + L3_TM_CALIB_DIG18 = mask_read(0xFD40EC48, 0xFFFFFF0F); + L3_TM_CALIB_DIG18 = L3_TM_CALIB_DIG18 | ((n_code & 0x7) << 5) | 0x10; + + L3_TM_CALIB_DIG16 = mask_read(0xFD40EC40, 0xFFFFFFF8); + L3_TM_CALIB_DIG16 = L3_TM_CALIB_DIG16 | ((r_code >> 1) & 0x7); + + L3_TM_CALIB_DIG15 = mask_read(0xFD40EC3C, 0xFFFFFF30); + L3_TM_CALIB_DIG15 = L3_TM_CALIB_DIG15 | ((r_code & 0x1) << 7) + | 0x40 | 0x8 | ((i_code >> 1) & 0x7); + + L3_TM_CALIB_DIG14 = mask_read(0xFD40EC38, 0xFFFFFF3F); + L3_TM_CALIB_DIG14 = L3_TM_CALIB_DIG14 | ((i_code & 0x1) << 7) | 0x40; + + Xil_Out32(0xFD40EC50, L3_TM_CALIB_DIG20); + Xil_Out32(0xFD40EC4C, L3_TM_CALIB_DIG19); + Xil_Out32(0xFD40EC48, L3_TM_CALIB_DIG18); + Xil_Out32(0xFD40EC40, L3_TM_CALIB_DIG16); + Xil_Out32(0xFD40EC3C, L3_TM_CALIB_DIG15); + Xil_Out32(0xFD40EC38, L3_TM_CALIB_DIG14); + return maskstatus; +} + +static int init_serdes(void) +{ + int status = 1; + + status &= psu_resetin_init_data(); + + status &= serdes_fixcal_code(); + status &= serdes_enb_coarse_saturation(); + + status &= psu_serdes_init_data(); + status &= psu_resetout_init_data(); + + return status; +} + +static void init_peripheral(void) +{ + psu_mask_write(0xFD5F0018, 0x8000001FU, 0x8000001FU); +} + +int psu_init(void) +{ + int status = 1; + + status &= psu_mio_init_data(); + status &= psu_peripherals_pre_init_data(); + status &= psu_pll_init_data(); + status &= psu_clock_init_data(); + status &= psu_ddr_init_data(); + status &= psu_ddr_phybringup_data(); + status &= psu_peripherals_init_data(); + status &= init_serdes(); + init_peripheral(); + + status &= psu_afi_config(); + psu_ddr_qos_init_data(); + + if (status == 0) + return 1; + return 0; +} diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig new file mode 100644 index 000000000000..2d70805dc398 --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_revA_defconfig @@ -0,0 +1,117 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_SYS_PROMPT="ZynqMP> " +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
Similar SCs but different wiring.
- dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot.
Signed-off-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Harini Katakam harini.katakam@xilinx.com ---
arch/arm/dts/Makefile | 2 + arch/arm/dts/zynqmp-a2197-g-revA.dts | 282 +++++++++ arch/arm/dts/zynqmp-a2197-p-revA.dts | 567 +++++++++++++++++++ board/xilinx/zynqmp/zynqmp-a2197-g-revA | 1 + board/xilinx/zynqmp/zynqmp-a2197-p-revA | 1 + configs/xilinx_zynqmp_a2197_g_revA_defconfig | 116 ++++ configs/xilinx_zynqmp_a2197_p_revA_defconfig | 117 ++++ configs/xilinx_zynqmp_a2197_revA_defconfig | 1 + 8 files changed, 1087 insertions(+) create mode 100644 arch/arm/dts/zynqmp-a2197-g-revA.dts create mode 100644 arch/arm/dts/zynqmp-a2197-p-revA.dts create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-g-revA create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-p-revA create mode 100644 configs/xilinx_zynqmp_a2197_g_revA_defconfig create mode 100644 configs/xilinx_zynqmp_a2197_p_revA_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9d55bd6e2669..6fb9f6311dfc 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -248,6 +248,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultra96-rev1.dtb \ avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \ zynqmp-a2197-revA.dtb \ + zynqmp-a2197-g-revA.dtb \ + zynqmp-a2197-p-revA.dtb \ zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ diff --git a/arch/arm/dts/zynqmp-a2197-g-revA.dts b/arch/arm/dts/zynqmp-a2197-g-revA.dts new file mode 100644 index 000000000000..c6072b5f4273 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-g-revA.dts @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller on MGT + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek michal.simek@xilinx.com + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 MGT Char board RevA"; + compatible = "xlnx,zynqmp-a2197-g-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + mmc0 = &sdhci0; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&gem0 { /* eth MDIO 76/77 */ + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; + phy0: phy@0 { /* marwell m88e1512 */ + reg = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; +/* xlnx,phy-type = <PHY_TYPE_SGMII>; */ + }; +/* phy-names = "..."; + phys = <&lane0 PHY_TYPE_SGMII ... > + Note: lane0 sgmii/lane1 usb3 */ +}; + +&gpio { + status = "okay"; + gpio-line-names = "", "", "", "", "", /* 0 - 4 */ + "", "", "", "", "", /* 5 - 9 */ + "", "", "", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "", "", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "", "", "ETH_RESET_B", "", "", /* 40 - 44 */ + "", "", "", "", "", /* 45 - 49 */ + "", "", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */ + "", "", "", "", "", /* 65 - 69 */ + "", "", "", "", "", /* 70 - 74 */ + "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ + "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */ + "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */ + "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ + "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ + "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */ + "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */ + "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */ + "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */ + "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */ + "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */ + "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */ + "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */ + "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */ + "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + scl-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + i2c-mux@74 { /* u94 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@50 { /* u96 - 24LC32A - 256B */ + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + i2c@1 { /* CM_I2C_SCL - Samtec */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c@2 { /* PMBUS - AFX_PMBUS */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + tps544@d { /* u85 */ + compatible = "ti,tps544b25"; + reg = <0xd>; + }; + tps544@10 { /* u73 */ + compatible = "ti,tps544b25"; + reg = <0x10>; + }; + tps544@11 { /* u76 */ + compatible = "ti,tps544b25"; + reg = <0x11>; + }; + tps544@12 { /* u77 */ + compatible = "ti,tps544b25"; + reg = <0x12>; + }; + tps544@13 { /* u80 */ + compatible = "ti,tps544b25"; + reg = <0x13>; + }; + tps544@14 { /* u81 */ + compatible = "ti,tps544b25"; + reg = <0x14>; + }; + tps544@15 { /* u83 */ + compatible = "ti,tps544b25"; + reg = <0x15>; + }; + tps544@16 { /* u63 */ + compatible = "ti,tps544b25"; + reg = <0x16>; + }; + tps544@17 { /* u66 */ + compatible = "ti,tps544b25"; + reg = <0x17>; + }; + tps544@18 { /* u67 */ + compatible = "ti,tps544b25"; + reg = <0x18>; + }; + tps544@19 { /* u69 */ + compatible = "ti,tps544b25"; + reg = <0x19>; + }; + tps544@1d { /* u88 */ + compatible = "ti,tps544b25"; + reg = <0x1d>; + }; + tps544@1e { /* u89 */ + compatible = "ti,tps544b25"; + reg = <0x1e>; + }; + tps544@1f { /* u87 */ + compatible = "ti,tps544b25"; + reg = <0x1f>; + }; + tps544@20 { /* u71 */ + compatible = "ti,tps544b25"; + reg = <0x20>; + }; + ina226@40 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina226@41 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <1000>; + }; + ina226@44 { /* u82 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina226@45 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + tps53681@c0 { /* u53 - FIXME name - don't know what it does - also vcc_io_soc */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + }; + }; + i2c@3 { /* fmc1 via JA2G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + eeprom_fmc1: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@4 { /* fmc2 via JA3G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + eeprom_fmc2: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@5 { /* fmc3 via JA4G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + eeprom_fmc3: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@6 { /* ddr dimm */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + /* 7 unused */ + }; +}; + +&usb0 { /* USB0 MIO52-63 */ + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm/dts/zynqmp-a2197-p-revA.dts b/arch/arm/dts/zynqmp-a2197-p-revA.dts new file mode 100644 index 000000000000..322b36e391a7 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-p-revA.dts @@ -0,0 +1,567 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek michal.simek@xilinx.com + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 Processor Char board RevA"; /* Tenzing */ + compatible = "xlnx,zynqmp-a2197-p-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + /* xlnx,fmc-eeprom = FIXME */ + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart1 { /* uart1 MIO40-41 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "okay"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; /* DTG generates this properly 1512 */ + is-internal-pcspma; + /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "", "", "", "", "", /* 0 - 4 */ + "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */ + "DC_SYS_CTRL3", "DC_SYS_CTRL4", "DC_SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ + "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ + "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */ + "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */ + "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ + "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ + "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */ + "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */ + "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */ + "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */ + "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */ + "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */ + "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */ + "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */ + "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */ + "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u33 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c@0 { /* PMBUS1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* On connector J98 */ + reg_vcc_fmc: tps544@7 { /* u80 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x7>; + regulator-name = "reg_vcc_fmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + /* enable-gpio = <&gpio0 23 0x4>; optional */ + }; + reg_vcc_ram: tps544@8 { /* u83 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x8>; + }; + reg_vcc_pslp: tps544@9 { /* u85 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x9>; + }; + reg_vcc_psfp: tps544@a { /* u86 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xa>; + }; + reg_vccint: tps53681@c0 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + /* vccint, vcc_io_soc */ + }; + }; + i2c@1 { /* PMBUS1_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME check alerts comming to SC */ + vcc_fmc: ina226@42 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u82 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc_pslp: ina226@44 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + vcc_psfp: ina226@45 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* PMBUS2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* On connector J104 */ + reg_vccaus: tps544@d { /* u88 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xd>; + }; + reg_vccaux_fmc: tps544@e { /* u90 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xe>; + }; + reg_vcco_500: tps544@f { /* u93 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xf>; + }; + reg_vcco_501: tps544@10 { /* u95 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x10>; + }; + reg_vcco_502: tps544@11 { /* u97 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x11>; + }; + reg_vcco_503: tps544@12 { /* u99 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x12>; + }; + reg_vcc1v8: tps544@13 { /* u101 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x13>; + }; + reg_vcc3v3: tps544@14 { /* u102 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x14>; + }; + reg_vcc1v2_ddr4: tps544@15 { /* u104 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x15>; + }; + reg_vcc1v1_lp4: tps544@16 { /* u106 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x16>; + }; + reg_vcc1_1V8_lp4: tps544@17 { /* u108 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x17>; + }; + reg_vadj_fmc: tps544@19 { /* u109 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x19>; + }; + reg_mgtyavcc: tps544@1a { /* u111 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1a>; + }; + reg_mgtyavtt: tps544@1b { /* u114 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1b>; + }; + reg_mgtyvccaux: tps544@1c { /* u115 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1c>; + }; + reg_util_1v13: tps544@1d { /* u117 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1d>; + }; + reg_util_1v8: tps544@1e { /* u118 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1e>; + }; + reg_util_2v5: tps544@1f { /* u119 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1f>; + }; + }; + i2c@3 { /* PMBUS2_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* FIXME check alerts coming to SC */ + vccaux: ina226@40 { /* u89 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + vccaux_fmc: ina226@41 { /* u91 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + vcco_500: ina226@42 { /* u92 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcco_501: ina226@43 { /* u94 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcco_502: ina226@44 { /* u96 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + vcco_503: ina226@45 { /* u98 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + vcc_1v8: ina226@46 { /* u100 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + vcc_3v3: ina226@47 { /* u103 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + vcc_1v2_ddr4: ina226@48 { /* u105 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <1000>; + }; + vcc1v1_lp4: ina226@49 { /* u107 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + vadj_fmc: ina226@4a { /* u110 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + mgtyavcc: ina226@4b { /* u112 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <1000>; + }; + mgtyavtt: ina226@4c { /* u113 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <1000>; + }; + mgtyvccaux: ina226@4d { /* u116 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + vcc_bat: ina226@4e { /* u12 */ + compatible = "ti,ina226"; + reg = <0x4e>; + shunt-resistor = <10000000>; /* 10 ohm */ + }; + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* connected to J212G */ + /* zynqmp sm alert or samtec J212H */ + }; + /* 5-7 unused */ + }; +}; + +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + /* Must be enabled via J242 */ + eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + i2c-mux@74 { /* u35 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u34 - m24128 16kB */ + compatible = "st,24c128", "atmel,24c128"; + reg = <0x54>; + }; + si570_ref_clk: clock-generator@5d { /* u32 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* 570JAC000900DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* Connection via Samtec J212D */ + /* Use for storing information about X-PRC card */ + x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Use for setting up certain features on X-PRC card */ + x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; /* IRQ not connected */ + #gpio-cells = <2>; + gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", + "", "", "", ""; + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + input; /* FIXME add meaning */ + line-name = "sw4_1"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + input; /* FIXME add meaning */ + line-name = "sw4_2"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + input; /* FIXME add meaning */ + line-name = "sw4_3"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + input; /* FIXME add meaning */ + line-name = "sw4_4"; + }; + }; + }; + i2c@1 { /* FMCP1_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME connection to Samtec J51C */ + /* expected eeprom 0x50 SE cards */ + }; + i2c@2 { /* FMCP2_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* FIXME connection to Samtec J53C */ + /* expected eeprom 0x50 SE cards */ + }; + i2c@3 { /* DDR4_DIMM1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_ddr_dimm1: clock-generator@60 { /* u2 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* 0x50 SPD? */ + }; + i2c@4 { /* DDR4_DIMM2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_ddr_dimm2: clock-generator@60 { /* u3 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* 0x50 SPD? */ + }; + i2c@5 { /* LPDDR4_SI570_CLK */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_lpddr4: clock-generator@60 { /* u4 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "LPDDR4_SI570_CLK"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u5 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* 570JAC000900DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "HSDP_SI570"; + }; + }; + i2c@7 { /* PCIE_CLK */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* u36 0xd8 or 0xde - pcie clk buf - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */ + /* u37 0xd0 DNP - pcie clocking 1 - 9FGV1006BQ505LTGI - PCIe GEN 4 CLOCK GENERATOR FIXME - no linux driver */ + /* u38 0xca - pcie clocking 2 - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */ + clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 - pcie clocking 3 */ + #clock-cells = <1>; /* author David Cater david.cater@idt.com*/ + compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */ + reg = <0xd8>; + /* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */ + /* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */ + + }; + + }; + }; +}; + +&usb0 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + maximum-speed = "super-speed"; +}; + +&usb1 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_1 { + /delete-property/ phy-names ; + /delete-property/ phys ; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk ; + snps,dis_u3_susphy_quirk ; + status = "okay"; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; diff --git a/board/xilinx/zynqmp/zynqmp-a2197-g-revA b/board/xilinx/zynqmp/zynqmp-a2197-g-revA new file mode 120000 index 000000000000..a64c140b860a --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-g-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA \ No newline at end of file diff --git a/board/xilinx/zynqmp/zynqmp-a2197-p-revA b/board/xilinx/zynqmp/zynqmp-a2197-p-revA new file mode 120000 index 000000000000..a64c140b860a --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-p-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA \ No newline at end of file diff --git a/configs/xilinx_zynqmp_a2197_g_revA_defconfig b/configs/xilinx_zynqmp_a2197_g_revA_defconfig new file mode 100644 index 000000000000..2f6dc7641a80 --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_g_revA_defconfig @@ -0,0 +1,116 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_SYS_PROMPT="ZynqMP> " +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-g-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_p_revA_defconfig b/configs/xilinx_zynqmp_a2197_p_revA_defconfig new file mode 100644 index 000000000000..4ce634cdaacf --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_p_revA_defconfig @@ -0,0 +1,117 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_SPL_ZYNQMP_TWO_SDHCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_SYS_PROMPT="ZynqMP> " +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-p-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig index 2d70805dc398..2859ef553e33 100644 --- a/configs/xilinx_zynqmp_a2197_revA_defconfig +++ b/configs/xilinx_zynqmp_a2197_revA_defconfig @@ -44,6 +44,7 @@ CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA" +CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-a2197-g-revA zynqmp-a2197-p-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y
Similar to processor board but i2c structure is completely different.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-a2197-m-revA.dts | 461 +++++++++++++++++++ board/xilinx/zynqmp/zynqmp-a2197-m-revA | 1 + configs/xilinx_zynqmp_a2197_m_revA_defconfig | 116 +++++ configs/xilinx_zynqmp_a2197_revA_defconfig | 2 +- 5 files changed, 580 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/zynqmp-a2197-m-revA.dts create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-m-revA create mode 100644 configs/xilinx_zynqmp_a2197_m_revA_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6fb9f6311dfc..3066b4ed3037 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -249,6 +249,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \ zynqmp-a2197-revA.dtb \ zynqmp-a2197-g-revA.dtb \ + zynqmp-a2197-m-revA.dtb \ zynqmp-a2197-p-revA.dtb \ zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ diff --git a/arch/arm/dts/zynqmp-a2197-m-revA.dts b/arch/arm/dts/zynqmp-a2197-m-revA.dts new file mode 100644 index 000000000000..e4b45eafe42e --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-m-revA.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek michal.simek@xilinx.com + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 Memory Char board RevA"; + compatible = "xlnx,zynqmp-a2197-m-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + usb0 = &usb0; + usb1 = &usb1; + spi0 = &qspi; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + }; +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80", "spi-flash"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; /* FIXME tap delay */ +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart1 { /* uart1 MIO40-41 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "disable"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; /* DTG generates this properly 1512 */ + phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; + phy0: phy@0 { /* marwell m88e1512 - SGMII */ + reg = <0>; +/* xlnx,phy-type = <PHY_TYPE_SGMII>; */ + }; +/* phy-names = "..."; + phys = <&lane0 PHY_TYPE_SGMII ... > + Note: lane0 sgmii/lane1 usb3 */ +}; + +&gpio { + status = "okay"; + gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */ + "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */ + "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ + "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "", "", "", "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 -89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u46 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { /* PMBUS must be enabled via SW21 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + reg_vcc1v2_lp4: tps544@15 { /* u97 */ + compatible = "ti,tps544b25"; + reg = <0x15>; + }; + reg_vcc1v1_lp4: tps544@16 { /* u95 */ + compatible = "ti,tps544b25"; + reg = <0x16>; + }; + reg_vdd1_1v8_lp4: tps544@17 { /* u99 */ + compatible = "ti,tps544b25"; + reg = <0x17>; + }; + /* UTIL_PMBUS connection */ + reg_vcc1v8: tps544@13 { /* u92 */ + compatible = "ti,tps544b25"; + reg = <0x13>; + }; + reg_vcc3v3: tps544@14 { /* u93 */ + compatible = "ti,tps544b25"; + reg = <0x14>; + }; + reg_vcc5v0: tps544@1e { /* u94 */ + compatible = "ti,tps544b25"; + reg = <0x1e>; + }; + }; + i2c@1 { /* PMBUS_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + vcc_aux: ina226@42 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc1v1_lp4: ina226@46 { /* u96 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + vcc1v2_lp4: ina226@47 { /* u98 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + vdd1_1v8_lp4: ina226@48 { /* u100 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + vcc0v6_lp4: ina226@49 { /* u101 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* PMBUS1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + reg_vccint: tps53681@c0 { /* u69 */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + }; + reg_vcc_pmc: tps544@7 { /* u80 */ + compatible = "ti,tps544b25"; + reg = <0x7>; + }; + reg_vcc_ram: tps544@8 { /* u82 */ + compatible = "ti,tps544b25"; + reg = <0x8>; + }; + reg_vcc_pslp: tps544@9 { /* u83 */ + compatible = "ti,tps544b25"; + reg = <0x9>; + }; + reg_vcc_psfp: tps544@a { /* u84 */ + compatible = "ti,tps544b25"; + reg = <0xa>; + }; + reg_vccaux: tps544@d { /* u85 */ + compatible = "ti,tps544b25"; + reg = <0xd>; + }; + reg_vccaux_pmc: tps544@e { /* u87 */ + compatible = "ti,tps544b25"; + reg = <0xe>; + }; + reg_vcco_500: tps544@f { /* u88 */ + compatible = "ti,tps544b25"; + reg = <0xf>; + }; + reg_vcco_501: tps544@10 { /* u89 */ + compatible = "ti,tps544b25"; + reg = <0x10>; + }; + reg_vcco_502: tps544@11 { /* u90 */ + compatible = "ti,tps544b25"; + reg = <0x11>; + }; + reg_vcco_503: tps544@12 { /* u91 */ + compatible = "ti,tps544b25"; + reg = <0x12>; + }; + }; + i2c@3 { /* MEM PMBUS - FIXME bug in schematics */ + #address-cells = <1>; + #size-cells = <0>; + /* reg = <3>; */ + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* connected to U20G */ + }; + /* 5-7 unused */ + }; +}; + +/* TODO sysctrl via J239 */ +/* TODO samtec J212G/H via J242 */ +/* TODO teensy via U30 PCA9543A bus 1 */ +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + /* Must be enabled via J242 */ + eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + i2c-mux@74 { /* u35 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + si570_ref_clk: clock-generator@5d { /* u26 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* Connection via Samtec U20D */ + /* Use for storing information about X-PRC card */ + x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Use for setting up certain features on X-PRC card */ + x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; /* IRQ not connected */ + #gpio-cells = <2>; + gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", + "", "", "", ""; + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + input; /* FIXME add meaning */ + line-name = "sw4_1"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + input; /* FIXME add meaning */ + line-name = "sw4_2"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + input; /* FIXME add meaning */ + line-name = "sw4_3"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + input; /* FIXME add meaning */ + line-name = "sw4_4"; + }; + }; + }; + i2c@1 { /* UTIL_PMBUS - FIXME incorrect schematics */ + #address-cells = <1>; + #size-cells = <0>; + /* reg = <1>; */ + }; + i2c@2 { /* C0_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_c0_lp4: clock-generator@5d { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C0_LP4_SI570_CLK"; + }; + }; + i2c@3 { /* C1_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_c1_lp4: clock-generator@5d { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C1_LP4_SI570_CLK"; + }; + }; + i2c@4 { /* C2_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_c2_lp4: clock-generator@5d { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C2_LP4_SI570_CLK"; + }; + }; + i2c@5 { /* C3_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_c3_lp4: clock-generator@5d { /* u15 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C3_LP4_SI570_CLK"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u19 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "HSDP_SI570"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + /* dr_mode = "peripheral"; */ + maximum-speed = "high-speed"; +}; + +&usb1 { + status = "disabled"; /* not at mem board */ + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_1 { + /delete-property/ phy-names ; + /delete-property/ phys ; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk ; + snps,dis_u3_susphy_quirk ; + status = "disabled"; +}; diff --git a/board/xilinx/zynqmp/zynqmp-a2197-m-revA b/board/xilinx/zynqmp/zynqmp-a2197-m-revA new file mode 120000 index 000000000000..a64c140b860a --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-m-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA \ No newline at end of file diff --git a/configs/xilinx_zynqmp_a2197_m_revA_defconfig b/configs/xilinx_zynqmp_a2197_m_revA_defconfig new file mode 100644 index 000000000000..d9107d6bb867 --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_m_revA_defconfig @@ -0,0 +1,116 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_SYS_PROMPT="ZynqMP> " +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-m-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig index 2859ef553e33..ace011423249 100644 --- a/configs/xilinx_zynqmp_a2197_revA_defconfig +++ b/configs/xilinx_zynqmp_a2197_revA_defconfig @@ -44,7 +44,7 @@ CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA" -CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-a2197-g-revA zynqmp-a2197-p-revA" +CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-a2197-g-revA zynqmp-a2197-p-revA zynqmp-a2197-m-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y
čt 19. 9. 2019 v 10:14 odesílatel Michal Simek michal.simek@xilinx.com napsal:
Hi,
these patches are adding support for System controller on Versal board which is capable to monitor and talk to Versal device.
Thanks, Michal
Michal Simek (3): arm64: zynqmp: Add generic a2197 system controller config arm64: zynqmp: Add System Controller for a2197-g/p arm64: zynqmp: Add a2197 memory board revA
arch/arm/dts/Makefile | 4 + arch/arm/dts/zynqmp-a2197-g-revA.dts | 282 ++++ arch/arm/dts/zynqmp-a2197-m-revA.dts | 461 +++++++ arch/arm/dts/zynqmp-a2197-p-revA.dts | 567 ++++++++ arch/arm/dts/zynqmp-a2197-revA.dts | 89 ++ board/xilinx/zynqmp/zynqmp-a2197-g-revA | 1 + board/xilinx/zynqmp/zynqmp-a2197-m-revA | 1 + board/xilinx/zynqmp/zynqmp-a2197-p-revA | 1 + .../zynqmp/zynqmp-a2197-revA/psu_init_gpl.c | 1171 +++++++++++++++++ configs/xilinx_zynqmp_a2197_g_revA_defconfig | 116 ++ configs/xilinx_zynqmp_a2197_m_revA_defconfig | 116 ++ configs/xilinx_zynqmp_a2197_p_revA_defconfig | 117 ++ configs/xilinx_zynqmp_a2197_revA_defconfig | 118 ++ 13 files changed, 3044 insertions(+) create mode 100644 arch/arm/dts/zynqmp-a2197-g-revA.dts create mode 100644 arch/arm/dts/zynqmp-a2197-m-revA.dts create mode 100644 arch/arm/dts/zynqmp-a2197-p-revA.dts create mode 100644 arch/arm/dts/zynqmp-a2197-revA.dts create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-g-revA create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-m-revA create mode 120000 board/xilinx/zynqmp/zynqmp-a2197-p-revA create mode 100644 board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c create mode 100644 configs/xilinx_zynqmp_a2197_g_revA_defconfig create mode 100644 configs/xilinx_zynqmp_a2197_m_revA_defconfig create mode 100644 configs/xilinx_zynqmp_a2197_p_revA_defconfig create mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig
-- 2.17.1
Applied all. M
participants (2)
-
Michal Simek -
Michal Simek