Re: [PATCH] rockchip: rk3328: add rock-pi-e-rk3328_defconfig
Hi banglang,
Does this board dts also upstream to kernel? If yes, please split the dts as a separate patch
and add the commit info in the message.
On 2020/4/13 下午4:23, banglang.huang wrote:
The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53.
Net - Dual ethernet port, 1 X Gbe, 1 X 100M USB - USB 3.0 DC - USB-Type C, 5V 2A Storage - TF card, eMMCJust build u-boot-dtb.bin for Rockpi E board and follow the blow steps to replace the relevant partition.
./rkbin/tools/loaderimage --pack --uboot u-boot-dtb.bin \ uboot.img 0x200000 --size 1024 1 dd if=uboot.img of=/dev/sdcard seek=16384 conv=notrunc
RK3328 has enable the TPL support for dram init, could you enable TPL/SPL for this board?
Thanks,
- Kever
Signed-off-by: banglang.huang banglang.huang@foxmail.com
Changes for v3
- rename to rock-pi-eChanges for v2
- add introduction for rockpie in doc/README.rockchip - enable CONFIG_MISC_INIT_R, CONFIG_SMBIOS_MANUFACTURER, and CONFIG_SMBIOS_PRODUCT_NAMEarch/arm/dts/Makefile | 3 +- arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi | 12 + arch/arm/dts/rk3328-rock-pi-e.dts | 256 ++++++++++++++++++++++ board/rockchip/evb_rk3328/MAINTAINERS | 7 + configs/rock-pi-e-rk3328_defconfig | 99 +++++++++ doc/README.rockchip | 3 +- 6 files changed, 378 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi create mode 100644 arch/arm/dts/rk3328-rock-pi-e.dts create mode 100644 configs/rock-pi-e-rk3328_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 820ee9733a..f0897f2928 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -104,7 +104,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
dtb-$(CONFIG_ROCKCHIP_RK3328) += \ rk3328-evb.dtb \
- rk3328-rock64.dtb
rk3328-rock64.dtb \
rk3328-rock-pi-e.dtb
dtb-$(CONFIG_ROCKCHIP_RK3368) += \ rk3368-lion.dtb \
diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi new file mode 100644 index 0000000000..012209110a --- /dev/null +++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- (C) Copyright 2020 Radxa
- */
+#include "rk3328-u-boot.dtsi" +#include "rk3328-sdram-ddr3-666.dtsi"
+&usb_host0_xhci {
- vbus-supply = <&vcc5v0_host_xhci>;
- status = "okay";
+}; diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts new file mode 100644 index 0000000000..56b8c3f1e6 --- /dev/null +++ b/arch/arm/dts/rk3328-rock-pi-e.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- (C) Copyright 2020 Radxa
- */
+/dts-v1/; +#include "rk3328.dtsi"
+/ {
- model = "Radxa Rockpi E";
- compatible = "radxa,rockpie", "rockchip,rk3328";
- chosen {
stdout-path = &uart2;- };
- gmac_clkin: external-gmac-clock {
compatible = "fixed-clock";clock-frequency = <125000000>;clock-output-names = "gmac_clkin";#clock-cells = <0>;- };
- vcc3v3_sdmmc: sdmmc-pwren {
compatible = "regulator-fixed";regulator-name = "vcc3v3";gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;pinctrl-names = "default";pinctrl-0 = <&sdmmc0m1_gpio>;regulator-always-on;regulator-boot-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;vin-supply = <&vcc_io>;- };
- vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
compatible = "regulator-fixed";enable-active-high;regulator-name = "vcc5v0_host_xhci";gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;- };
+};
+&cpu0 {
- cpu-supply = <&vdd_arm>;
+};
+&cpu1 {
- cpu-supply = <&vdd_arm>;
+};
+&cpu2 {
- cpu-supply = <&vdd_arm>;
+};
+&cpu3 {
- cpu-supply = <&vdd_arm>;
+};
+&saradc {
- status = "okay";
+};
+&uart2 {
- status = "okay";
+};
+&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- max-frequency = <150000000>;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
- supports-sd;
- vmmc-supply = <&vcc3v3_sdmmc>;
- status = "okay";
+};
+&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- supports-emmc;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vcc_18emmc>;
- status = "okay";
+};
+&gmac2io {
- phy-supply = <&vcc_io>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
- assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmiim1_pins>;
- tx_delay = <0x26>;
- rx_delay = <0x11>;
- status = "okay";
+};
+&usb_host0_ehci {
- status = "okay";
+};
+&usb_host0_ohci {
- status = "okay";
+};
+&usb20_otg {
- status = "okay";
+};
+&i2c1 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
- rk805: pmic@18 {
compatible = "rockchip,rk805";status = "okay";reg = <0x18>;interrupt-parent = <&gpio2>;interrupts = <6 IRQ_TYPE_LEVEL_LOW>;pinctrl-names = "default";pinctrl-0 = <&pmic_int_l>;rockchip,system-power-controller;wakeup-source;gpio-controller;#gpio-cells = <2>;#clock-cells = <1>;clock-output-names = "xin32k", "rk805-clkout2";regulators {vdd_logic: DCDC_REG1 {regulator-name = "vdd_logic";regulator-min-microvolt = <712500>;regulator-max-microvolt = <1450000>;regulator-ramp-delay = <6001>;regulator-boot-on;regulator-always-on;regulator-state-mem {regulator-on-in-suspend;regulator-suspend-microvolt = <1000000>;};};vdd_arm: DCDC_REG2 {regulator-name = "vdd_arm";regulator-min-microvolt = <712500>;regulator-max-microvolt = <1450000>;regulator-ramp-delay = <6001>;regulator-boot-on;regulator-always-on;regulator-state-mem {regulator-on-in-suspend;regulator-suspend-microvolt = <1000000>;};};vcc_ddr: DCDC_REG3 {regulator-name = "vcc_ddr";regulator-boot-on;regulator-always-on;regulator-state-mem {regulator-on-in-suspend;};};vcc_io: DCDC_REG4 {regulator-name = "vcc_io";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-boot-on;regulator-always-on;regulator-state-mem {regulator-on-in-suspend;regulator-suspend-microvolt = <3300000>;};};vdd_18: LDO_REG1 {regulator-name = "vdd_18";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-boot-on;regulator-always-on;regulator-state-mem {regulator-on-in-suspend;regulator-suspend-microvolt = <1800000>;};};vcc_18emmc: LDO_REG2 {regulator-name = "vcc_18emmc";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-boot-on;regulator-always-on;regulator-state-mem {regulator-on-in-suspend;regulator-suspend-microvolt = <1800000>;};};vdd_10: LDO_REG3 {regulator-name = "vdd_10";regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;regulator-boot-on;regulator-always-on;regulator-state-mem {regulator-on-in-suspend;regulator-suspend-microvolt = <1000000>;};};};- };
+};
+&io_domains {
- status = "okay";
- vccio1-supply = <&vcc_io>;
- vccio2-supply = <&vcc_18emmc>;
- vccio3-supply = <&vcc_io>;
- vccio4-supply = <&vcc_io>;
- vccio5-supply = <&vcc_io>;
- vccio6-supply = <&vcc_io>;
- pmuio-supply = <&vcc_io>;
+};
+&pinctrl {
- pmic {
pmic_int_l: pmic-int-l {rockchip,pins =<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */};- };
+};
diff --git a/board/rockchip/evb_rk3328/MAINTAINERS b/board/rockchip/evb_rk3328/MAINTAINERS index c661d2e06a..77191f8e2e 100644 --- a/board/rockchip/evb_rk3328/MAINTAINERS +++ b/board/rockchip/evb_rk3328/MAINTAINERS @@ -10,3 +10,10 @@ M: Matwey V. Kornilov matwey.kornilov@gmail.com S: Maintained F: configs/rock64-rk3328_defconfig F: arch/arm/dts/rk3328-rock64-u-boot.dtsi
+ROCK-PI-E-RK3328 +M: Banglang Huang banglang.huang@foxmail.com +S: Maintained +F: configs/rock-pi-e-rk3328_defconfig +F: arch/arm/dts/rk3328-rock-pi-e.dts +F: arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig new file mode 100644 index 0000000000..8c1ad28e92 --- /dev/null +++ b/configs/rock-pi-e-rk3328_defconfig @@ -0,0 +1,99 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_ENV_OFFSET=0x3F8000 +CONFIG_ROCKCHIP_RK3328=y +CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_TPL_LIBCOMMON_SUPPORT=y +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x4000000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xFF130000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SMBIOS_PRODUCT_NAME="rock-pi-e_rk3328" +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock-pi-e.dtb" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_TPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_TPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock-pi-e" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_TPL_OF_PLATDATA=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_TPL_DM=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_TPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_TPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PHY=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_SYSRESET=y +# CONFIG_TPL_SYSRESET is not set +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC2=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y +CONFIG_SMBIOS_MANUFACTURER="radxa" diff --git a/doc/README.rockchip b/doc/README.rockchip index 9b699b9ae5..d963698a3f 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -52,10 +52,11 @@ Two RK3308 boards are supported: - EVB RK3308 - use evb-rk3308 configuration - ROC-CC-RK3308 - use roc-cc-rk3308 configuration
-Two RK3328 board are supported: +Three RK3328 board are supported:
- EVB RK3328 - use evb-rk3328_defconfig - Pine64 Rock64 board - use rock64-rk3328_defconfig
- Radxa Rockpi E board - use rock-pi-e-rk3328_defconfig
Size RK3399 boards are supported (aarch64):
>Does this board dts also upstream to kernel? If yes, please split the >dts as a separate patch > >and add the commit info in the message. >
Temporarily not for upstream to kernel.
> >On 2020/4/13 PM 4:23, banglang.huang wrote: >> The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328 >> Quad-Core ARM Cortex A53. >> >> Net - Dual ethernet port, 1 X Gbe, 1 X 100M >> USB - USB 3.0 >> DC - USB-Type C, 5V 2A >> Storage - TF card, eMMC >> >> Just build u-boot-dtb.bin for Rockpi E board and follow the blow >> steps to replace the relevant partition. >> >> ./rkbin/tools/loaderimage --pack --uboot u-boot-dtb.bin \ >> uboot.img 0x200000 --size 1024 1 >> dd if=uboot.img of=/dev/sdcard seek=16384 conv=notrunc > > >RK3328 has enable the TPL support for dram init, could you enable >TPL/SPL for this board?
I am new to rk3328, could you tell me or give me a hint for how to enable TPL/SPL for rock-pi-e board ?
participants (2)
-
b.l.huang -
Kever Yang