[U-Boot-Users] Problem with Strata 28F256K3 Erasing on PXA
Hello again, everyone:
I am having trouble with the u-boot flash code on my target system. I am using the new 28F256K3 Intel chips on this target, instead of the 28F128J3A chips (which were on my development system).
U-Boot works with the 128J3A's but not with the 256K3's. I have tweaked the flash code so that it's correctly detecting the chips. And the u-boot runs out of these 256K3's when I program it into flash using JTAG. What does not work with the 256K3's is ERASING flash. And damned if I can figure out why. The u-boot code that is supposed to erase the flash just FLIES through in no time at all, without reporting any errors. But then when I try to write the flash-writing-code says "Error - flash not erased".
What do you think might be going on? How might I proceed to debug this? Does anyone out there have some test code that can erase the Intel Strata 28F256K3's?
Please advise - I am very lost and frustrated at the moment...
Thanks in advance, craig vanderborgh voxware incorporated
Craig,
I use the K3 Strata flash on our PXA board and I have no problems using the CFI driver built into u-boot. There was no need to write a custom driver.
Michael
On Dec 15, 2004, at 8:55 PM, Craig A. Vanderborgh wrote:
Hello again, everyone:
I am having trouble with the u-boot flash code on my target system. I am using the new 28F256K3 Intel chips on this target, instead of the 28F128J3A chips (which were on my development system).
U-Boot works with the 128J3A's but not with the 256K3's. I have tweaked the flash code so that it's correctly detecting the chips. And the u-boot runs out of these 256K3's when I program it into flash using JTAG. What does not work with the 256K3's is ERASING flash. And damned if I can figure out why. The u-boot code that is supposed to erase the flash just FLIES through in no time at all, without reporting any errors. But then when I try to write the flash-writing-code says "Error - flash not erased".
What do you think might be going on? How might I proceed to debug this? Does anyone out there have some test code that can erase the Intel Strata 28F256K3's?
Please advise - I am very lost and frustrated at the moment...
Thanks in advance, craig vanderborgh voxware incorporated
SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
participants (2)
-
Craig A. Vanderborgh -
Michael Frey