I2C protocol is not standardize for TPM 1.2. TIS prococol is define by the Trusted Computing Group and potentially available on several TPMs.

tpm_tis_infineon.h header is not generic enough.

Rename tpm_tis_infineon.h to tpm_tis.h and move infineon specific defines/variables to tpm_tis_infineon.c

Signed-off-by: Christophe Ricard christophe-h.ricard@st.com ---

drivers/tpm/{tpm_tis_infineon.h => tpm_tis.h} | 17 +---------------- drivers/tpm/tpm_tis_infineon.c | 17 ++++++++++++++++- 2 files changed, 17 insertions(+), 17 deletions(-) rename drivers/tpm/{tpm_tis_infineon.h => tpm_tis.h} (86%)

diff --git a/drivers/tpm/tpm_tis_infineon.h b/drivers/tpm/tpm_tis.h similarity index 86% rename from drivers/tpm/tpm_tis_infineon.h rename to drivers/tpm/tpm_tis.h index 3b510d1..25b152b 100644 --- a/drivers/tpm/tpm_tis_infineon.h +++ b/drivers/tpm/tpm_tis.h @@ -37,18 +37,12 @@ enum tpm_timeout { #define TPM_RSP_SIZE_BYTE 2 #define TPM_RSP_RC_BYTE 6

-enum i2c_chip_type { - SLB9635, - SLB9645, - UNKNOWN, -}; - struct tpm_chip { int is_open; int locality; u32 vend_dev; unsigned long timeout_a, timeout_b, timeout_c, timeout_d; /* msec */ - enum i2c_chip_type chip_type; + ulong chip_type; };

struct tpm_input_header { @@ -134,13 +128,4 @@ enum tis_status { TPM_STS_DATA_EXPECT = 0x08, };

-/* expected value for DIDVID register */ -#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L -#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L - -#define TPM_ACCESS(l) (0x0000 | ((l) << 4)) -#define TPM_STS(l) (0x0001 | ((l) << 4)) -#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4)) -#define TPM_DID_VID(l) (0x0006 | ((l) << 4)) - #endif diff --git a/drivers/tpm/tpm_tis_infineon.c b/drivers/tpm/tpm_tis_infineon.c index f57c328..a4b6741 100644 --- a/drivers/tpm/tpm_tis_infineon.c +++ b/drivers/tpm/tpm_tis_infineon.c @@ -30,17 +30,32 @@ #include <linux/types.h> #include <linux/unaligned/be_byteshift.h>

-#include "tpm_tis_infineon.h" +#include "tpm_tis.h" #include "tpm_internal.h"

DECLARE_GLOBAL_DATA_PTR;

+enum i2c_chip_type { + SLB9635, + SLB9645, + UNKNOWN, +}; + +/* expected value for DIDVID register */ +#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L +#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L + static const char * const chip_name[] = { [SLB9635] = "slb9635tt", [SLB9645] = "slb9645tt", [UNKNOWN] = "unknown/fallback to slb9635", };

+#define TPM_ACCESS(l) (0x0000 | ((l) << 4)) +#define TPM_STS(l) (0x0001 | ((l) << 4)) +#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4)) +#define TPM_DID_VID(l) (0x0006 | ((l) << 4)) + /* * tpm_tis_i2c_read() - read from TPM register * @addr: register address to read from

Add support for TPM ST33ZP24 family with i2c.

For i2c we are relying only on DM_I2C.

Signed-off-by: Christophe Ricard christophe-h.ricard@st.com ---

README | 7 + drivers/tpm/Kconfig | 9 + drivers/tpm/Makefile | 1 + drivers/tpm/tpm_tis_st33zp24_i2c.c | 543 +++++++++++++++++++++++++++++++++++++ 4 files changed, 560 insertions(+) create mode 100644 drivers/tpm/tpm_tis_st33zp24_i2c.c

diff --git a/README b/README index 9423c34..e7c41c3 100644 --- a/README +++ b/README @@ -1432,6 +1432,13 @@ The following options need to be configured: CONFIG_TPM_TIS_I2C_BURST_LIMITATION Define the burst count bytes upper limit

+ CONFIG_TPM_ST33ZP24 + Support for STMicroelectronics TPM devices. Requires DM_TPM support. + + CONFIG_TPM_ST33ZP24_I2C + Support for STMicroelectronics ST33ZP24 I2C devices. + Requires TPM_ST33ZP24 and I2C. + CONFIG_TPM_ATMEL_TWI Support for Atmel TWI TPM device. Requires I2C support.

diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig index 5a75f85..9432160 100644 --- a/drivers/tpm/Kconfig +++ b/drivers/tpm/Kconfig @@ -64,4 +64,13 @@ config TPM_AUTH_SESSIONS TPM_LoadKey2 and TPM_GetPubKey are provided. Both features are available using the 'tpm' command, too.

+config TPM_ST33ZP24_I2C + bool "STMicroelectronics ST33ZP24 I2C TPM" + depends on TPM && DM_I2C + ---help--- + This driver supports STMicroelectronics TPM devices connected on the I2C bus. + The usual tpm operations and the 'tpm' command can be used to talk + to the device using the standard TPM Interface Specification (TIS) + protocol + endmenu diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile index 1d49e95..cb066d7 100644 --- a/drivers/tpm/Makefile +++ b/drivers/tpm/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_TPM_ATMEL_TWI) += tpm_atmel_twi.o obj-$(CONFIG_TPM_TIS_INFINEON) += tpm_tis_infineon.o obj-$(CONFIG_TPM_TIS_LPC) += tpm_tis_lpc.o obj-$(CONFIG_TPM_TIS_SANDBOX) += tpm_tis_sandbox.o +obj-$(CONFIG_TPM_ST33ZP24_I2C) += tpm_tis_st33zp24_i2c.o diff --git a/drivers/tpm/tpm_tis_st33zp24_i2c.c b/drivers/tpm/tpm_tis_st33zp24_i2c.c new file mode 100644 index 0000000..9e4829f --- /dev/null +++ b/drivers/tpm/tpm_tis_st33zp24_i2c.c @@ -0,0 +1,543 @@ +/* + * STMicroelectronics TPM ST33ZP24 I2C UBOOT driver + * + * Copyright (C) 2016 STMicroelectronics + * + * Description: Device driver for ST33ZP24 I2C TPM TCG. + * + * This device driver implements the TPM interface as defined in + * the TCG TPM Interface Spec version 1.21, revision 1.0 and the + * STMicroelectronics Protocol Stack Specification version 1.2.0. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <i2c.h> +#include <tpm.h> +#include <errno.h> +#include <linux/types.h> +#include <asm/unaligned.h> + +#include "tpm_tis.h" +#include "tpm_internal.h" + +#define TPM_ACCESS 0x0 +#define TPM_STS 0x18 +#define TPM_DATA_FIFO 0x24 + +#define LOCALITY0 0 + +#define TPM_DUMMY_BYTE 0xAA +#define TPM_ST33ZP24_I2C_SLAVE_ADDR 0x13 + +#define TPM_WRITE_DIRECTION 0x80 + +/* + * st33zp24_i2c_write8_reg + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, The length of the data + * @return: Number of byte written successfully else an error code. + */ +static int st33zp24_i2c_write8_reg(struct udevice *dev, u8 tpm_register, + const u8 *tpm_data, size_t tpm_size) +{ + struct tpm_chip_priv *chip_priv = dev_get_uclass_priv(dev); + + chip_priv->buf[0] = tpm_register; + memcpy(chip_priv->buf + 1, tpm_data, tpm_size); + + return dm_i2c_write(dev, 0, chip_priv->buf, tpm_size + 1); +} + +/* +* st33zp24_i2c_read8_reg +* Recv byte from the TIS register according to the ST33ZP24 I2C protocol. +* @param: tpm_register, the tpm tis register where the data should be read +* @param: tpm_data, the TPM response +* @param: tpm_size, tpm TPM response size to read. +* @return: Number of byte read successfully else an error code. +*/ +static int st33zp24_i2c_read8_reg(struct udevice *dev, u8 tpm_register, + u8 *tpm_data, size_t tpm_size) +{ + int status; + u8 data; + + data = TPM_DUMMY_BYTE; + status = st33zp24_i2c_write8_reg(dev, tpm_register, &data, 1); + if (status < 0) + return status; + + return dm_i2c_read(dev, 0, tpm_data, tpm_size); +} + +/* + * st33zp24_i2c_write + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, the length of the data + * @return: number of byte written successfully: should be one if success. + */ +static int st33zp24_i2c_write(struct udevice *dev, u8 tpm_register, + const u8 *tpm_data, size_t tpm_size) +{ + return st33zp24_i2c_write8_reg(dev, tpm_register | TPM_WRITE_DIRECTION, + tpm_data, tpm_size); +} + +/* + * st33zp24_i2c_read + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: number of byte read successfully: should be one if success. + */ +static int st33zp24_i2c_read(struct udevice *dev, u8 tpm_register, + u8 *tpm_data, size_t tpm_size) +{ + return st33zp24_i2c_read8_reg(dev, tpm_register, tpm_data, tpm_size); +} + +/* + * st33zp24_i2c_release_locality release the active locality + * @param: chip, the tpm chip description. + */ +static void st33zp24_i2c_release_locality(struct udevice *dev) +{ + u8 data = TPM_ACCESS_ACTIVE_LOCALITY; + + st33zp24_i2c_write(dev, TPM_ACCESS, &data, 1); +} + +/* + * st33zp24_i2c_check_locality if the locality is active + * @param: chip, the tpm chip description + * @return: the active locality or -EACCES. + */ +static int st33zp24_i2c_check_locality(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + u8 data; + u8 status; + + status = st33zp24_i2c_read(dev, TPM_ACCESS, &data, 1); + if (!status && (data & + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) + return chip->locality; + + return -EACCES; +} + +/* + * st33zp24_i2c_request_locality request the TPM locality + * @param: chip, the chip description + * @return: the active locality or negative value. + */ +static int st33zp24_i2c_request_locality(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + unsigned long start, stop; + long ret; + u8 data; + + if (st33zp24_i2c_check_locality(dev) == chip->locality) + return chip->locality; + + data = TPM_ACCESS_REQUEST_USE; + ret = st33zp24_i2c_write(dev, TPM_ACCESS, &data, 1); + if (ret < 0) + return ret; + + /* wait for locality activated */ + start = get_timer(0); + stop = chip->timeout_a; + do { + if (st33zp24_i2c_check_locality(dev) >= 0) + return chip->locality; + udelay(TPM_TIMEOUT_MS * 1000); + } while (get_timer(start) < stop); + + return -EACCES; +} + +/* + * st33zp24_i2c_status return the TPM_STS register + * @param: chip, the tpm chip description + * @return: the TPM_STS register value. + */ +static u8 st33zp24_i2c_status(struct udevice *dev) +{ + u8 data; + + st33zp24_i2c_read(dev, TPM_STS, &data, 1); + + return data; +} + +/* + * st33zp24_i2c_get_burstcount return the burstcount address 0x19 0x1A + * @param: chip, the chip description + * return: the burstcount or -TPM_DRIVER_ERR in case of error. + */ +static int st33zp24_i2c_get_burstcount(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + unsigned long start, stop; + int burstcnt, status; + u8 tpm_reg, temp; + + /* wait for burstcount */ + start = get_timer(0); + stop = chip->timeout_d; + do { + tpm_reg = TPM_STS + 1; + status = st33zp24_i2c_read(dev, tpm_reg, &temp, 1); + if (status < 0) + return -EBUSY; + + tpm_reg = TPM_STS + 2; + burstcnt = temp; + status = st33zp24_i2c_read(dev, tpm_reg, &temp, 1); + if (status < 0) + return -EBUSY; + + burstcnt |= temp << 8; + if (burstcnt) + return burstcnt; + udelay(TIS_SHORT_TIMEOUT_MS * 1000); + } while (get_timer(start) < stop); + + return -EBUSY; +} + +/* + * st33zp24_i2c_cancel, cancel the current command execution or + * set STS to COMMAND READY. + * @param: chip, tpm_chip description. + */ +static void st33zp24_i2c_cancel(struct udevice *dev) +{ + u8 data; + + data = TPM_STS_COMMAND_READY; + st33zp24_i2c_write(dev, TPM_STS, &data, 1); +} + +/* + * st33zp24_i2c_wait_for_stat wait for a TPM_STS value + * @param: chip, the tpm chip description + * @param: mask, the value mask to wait + * @param: timeout, the timeout + * @param: status, + * @return: the tpm status, 0 if success, -ETIME if timeout is reached. + */ +static int st33zp24_i2c_wait_for_stat(struct udevice *dev, u8 mask, + unsigned long timeout, int *status) +{ + unsigned long start, stop; + + /* Check current status */ + *status = st33zp24_i2c_status(dev); + if ((*status & mask) == mask) + return 0; + + start = get_timer(0); + stop = timeout; + do { + udelay(TPM_TIMEOUT_MS * 1000); + *status = st33zp24_i2c_status(dev); + if ((*status & mask) == mask) + return 0; + } while (get_timer(start) < stop); + + return -ETIME; +} + +/* + * st33zp24_i2c_recv_data receive data + * @param: chip, the tpm chip description + * @param: buf, the buffer where the data are received + * @param: count, the number of data to receive + * @return: the number of bytes read from TPM FIFO. + */ +static int st33zp24_i2c_recv_data(struct udevice *dev, u8 *buf, size_t count) +{ + struct tpm_chip *chip = dev_get_priv(dev); + int size = 0, burstcnt, len, ret, status; + + while (size < count && + st33zp24_i2c_wait_for_stat(dev, TPM_STS_DATA_AVAIL | TPM_STS_VALID, + chip->timeout_c, &status) == 0) { + burstcnt = st33zp24_i2c_get_burstcount(dev); + if (burstcnt < 0) + return burstcnt; + len = min_t(int, burstcnt, count - size); + ret = st33zp24_i2c_read(dev, TPM_DATA_FIFO, buf + size, len); + if (ret < 0) + return ret; + + size += len; + } + + return size; +} + +/* + * st33zp24_i2c_recv received TPM response through TPM phy. + * @param: chip, tpm_chip description. + * @param: buf, the buffer to store data. + * @param: count, the number of bytes that can received (sizeof buf). + * @return: Returns zero in case of success else -EIO. + */ +static int st33zp24_i2c_recv(struct udevice *dev, u8 *buf, size_t count) +{ + struct tpm_chip *chip = dev_get_priv(dev); + int size, expected; + + if (!chip) + return -ENODEV; + + if (count < TPM_HEADER_SIZE) { + size = -EIO; + goto out; + } + + size = st33zp24_i2c_recv_data(dev, buf, TPM_HEADER_SIZE); + if (size < TPM_HEADER_SIZE) { + debug("TPM error, unable to read header\n"); + goto out; + } + + expected = get_unaligned_be32(buf + 2); + if (expected > count) { + size = -EIO; + goto out; + } + + size += st33zp24_i2c_recv_data(dev, &buf[TPM_HEADER_SIZE], + expected - TPM_HEADER_SIZE); + if (size < expected) { + debug("TPM error, unable to read remaining bytes of result\n"); + size = -EIO; + goto out; + } + +out: + st33zp24_i2c_cancel(dev); + st33zp24_i2c_release_locality(dev); + + return size; +} + +/* + * st33zp24_i2c_send send TPM commands through TPM phy. + * @param: chip, tpm_chip description. + * @param: buf, the buffer to send. + * @param: len, the number of bytes to send. + * @return: Returns zero in case of success else the negative error code. + */ +static int st33zp24_i2c_send(struct udevice *dev, const u8 *buf, size_t len) +{ + struct tpm_chip *chip = dev_get_priv(dev); + u32 i, size; + int burstcnt, ret, status; + u8 data, tpm_stat; + + if (!chip) + return -ENODEV; + if (len < TPM_HEADER_SIZE) + return -EIO; + + ret = st33zp24_i2c_request_locality(dev); + if (ret < 0) + return ret; + + tpm_stat = st33zp24_i2c_status(dev); + if ((tpm_stat & TPM_STS_COMMAND_READY) == 0) { + st33zp24_i2c_cancel(dev); + if (st33zp24_i2c_wait_for_stat(dev, TPM_STS_COMMAND_READY, + chip->timeout_b, &status) < 0) { + ret = -ETIME; + goto out_err; + } + } + + for (i = 0; i < len - 1;) { + burstcnt = st33zp24_i2c_get_burstcount(dev); + if (burstcnt < 0) + return burstcnt; + + size = min_t(int, len - i - 1, burstcnt); + ret = st33zp24_i2c_write(dev, TPM_DATA_FIFO, buf + i, size); + if (ret < 0) + goto out_err; + + i += size; + } + + tpm_stat = st33zp24_i2c_status(dev); + if ((tpm_stat & TPM_STS_DATA_EXPECT) == 0) { + ret = -EIO; + goto out_err; + } + + ret = st33zp24_i2c_write(dev, TPM_DATA_FIFO, buf + len - 1, 1); + if (ret < 0) + goto out_err; + + tpm_stat = st33zp24_i2c_status(dev); + if ((tpm_stat & TPM_STS_DATA_EXPECT) != 0) { + ret = -EIO; + goto out_err; + } + + data = TPM_STS_GO; + ret = st33zp24_i2c_write(dev, TPM_STS, &data, 1); + if (ret < 0) + goto out_err; + + return len; + +out_err: + st33zp24_i2c_cancel(dev); + st33zp24_i2c_release_locality(dev); + + return ret; +} + +static int st33zp24_i2c_cleanup(struct udevice *dev) +{ + st33zp24_i2c_cancel(dev); + /* + * The TPM needs some time to clean up here, + * so we sleep rather than keeping the bus busy + */ + mdelay(2); + st33zp24_i2c_release_locality(dev); + + return 0; +} + +static int st33zp24_i2c_init(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + + chip->is_open = 1; + + /* Default timeouts - these could move to the device tree */ + chip->timeout_a = TIS_SHORT_TIMEOUT_MS; + chip->timeout_b = TIS_LONG_TIMEOUT_MS; + chip->timeout_c = TIS_SHORT_TIMEOUT_MS; + chip->timeout_d = TIS_SHORT_TIMEOUT_MS; + + chip->locality = LOCALITY0; + + /* + * A timeout query to TPM can be placed here. + * Standard timeout values are used so far + */ + + return 0; +} + +static int st33zp24_i2c_open(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + int rc; + + debug("%s: start\n", __func__); + if (chip->is_open) + return -EBUSY; + + rc = st33zp24_i2c_init(dev); + if (rc < 0) + chip->is_open = 0; + + return rc; +} + +static int st33zp24_i2c_close(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + + if (chip->is_open) { + st33zp24_i2c_release_locality(dev); + chip->is_open = 0; + chip->vend_dev = 0; + } + + return 0; +} + +static int st33zp24_i2c_get_desc(struct udevice *dev, char *buf, int size) +{ + struct tpm_chip *chip = dev_get_priv(dev); + + if (size < 50) + return -ENOSPC; + + return snprintf(buf, size, "1.2 TPM (%s, chip type %s device-id 0x%x)", + chip->is_open ? "open" : "closed", + dev->name, + chip->vend_dev >> 16); +} + +static const struct tpm_ops st33zp24_i2c_tpm_ops = { + .open = st33zp24_i2c_open, + .close = st33zp24_i2c_close, + .recv = st33zp24_i2c_recv, + .send = st33zp24_i2c_send, + .cleanup = st33zp24_i2c_cleanup, + .get_desc = st33zp24_i2c_get_desc, +}; + +static int st33zp24_i2c_probe(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + + /* Default timeouts */ + chip->timeout_a = TIS_SHORT_TIMEOUT_MS; + chip->timeout_b = TIS_LONG_TIMEOUT_MS; + chip->timeout_c = TIS_SHORT_TIMEOUT_MS; + chip->timeout_d = TIS_SHORT_TIMEOUT_MS; + + chip->locality = LOCALITY0; + + i2c_set_chip_offset_len(dev, 0); + + debug("ST33ZP24 I2C TPM from STMicroelectronics found\n"); + + return 0; +} + +static int st33zp24_i2c_remove(struct udevice *dev) +{ + st33zp24_i2c_release_locality(dev); + + return 0; +} + +static const struct udevice_id st33zp24_i2c_ids[] = { + { .compatible = "st,st33zp24-i2c" }, + { } +}; + +U_BOOT_DRIVER(st33zp24_i2c) = { + .name = "st33zp24-i2c", + .id = UCLASS_TPM, + .of_match = of_match_ptr(st33zp24_i2c_ids), + .probe = st33zp24_i2c_probe, + .remove = st33zp24_i2c_remove, + .ops = &st33zp24_i2c_tpm_ops, + .priv_auto_alloc_size = sizeof(struct tpm_chip), +};

Add support for TPM ST33ZP24 spi.

The ST33ZP24 does have a spi interface. The transport protocol is proprietary.

For spi we are relying only on DM_SPI.

Signed-off-by: Christophe Ricard christophe-h.ricard@st.com ---

README | 4 + drivers/tpm/Kconfig | 9 + drivers/tpm/Makefile | 1 + drivers/tpm/tpm_tis_st33zp24_spi.c | 672 +++++++++++++++++++++++++++++++++++++ 4 files changed, 686 insertions(+) create mode 100644 drivers/tpm/tpm_tis_st33zp24_spi.c

diff --git a/README b/README index e7c41c3..dc2917c 100644 --- a/README +++ b/README @@ -1439,6 +1439,10 @@ The following options need to be configured: Support for STMicroelectronics ST33ZP24 I2C devices. Requires TPM_ST33ZP24 and I2C.

+ CONFIG_TPM_ST33ZP24_SPI + Support for STMicroelectronics ST33ZP24 SPI devices. + Requires TPM_ST33ZP24 and SPI. + CONFIG_TPM_ATMEL_TWI Support for Atmel TWI TPM device. Requires I2C support.

diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig index 9432160..9a7b7f5 100644 --- a/drivers/tpm/Kconfig +++ b/drivers/tpm/Kconfig @@ -73,4 +73,13 @@ config TPM_ST33ZP24_I2C to the device using the standard TPM Interface Specification (TIS) protocol

+config TPM_ST33ZP24_SPI + bool "STMicroelectronics ST33ZP24 SPI TPM" + depends on TPM && DM_SPI + ---help--- + This driver supports STMicroelectronics TPM devices connected on the SPI bus. + The usual tpm operations and the 'tpm' command can be used to talk + to the device using the standard TPM Interface Specification (TIS) + protocol + endmenu diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile index cb066d7..c42a93f 100644 --- a/drivers/tpm/Makefile +++ b/drivers/tpm/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_TPM_TIS_INFINEON) += tpm_tis_infineon.o obj-$(CONFIG_TPM_TIS_LPC) += tpm_tis_lpc.o obj-$(CONFIG_TPM_TIS_SANDBOX) += tpm_tis_sandbox.o obj-$(CONFIG_TPM_ST33ZP24_I2C) += tpm_tis_st33zp24_i2c.o +obj-$(CONFIG_TPM_ST33ZP24_SPI) += tpm_tis_st33zp24_spi.o diff --git a/drivers/tpm/tpm_tis_st33zp24_spi.c b/drivers/tpm/tpm_tis_st33zp24_spi.c new file mode 100644 index 0000000..417bbf1 --- /dev/null +++ b/drivers/tpm/tpm_tis_st33zp24_spi.c @@ -0,0 +1,672 @@ +/* + * STMicroelectronics TPM ST33ZP24 SPI UBOOT driver + * + * Copyright (C) 2016 STMicroelectronics + * + * Description: Device driver for ST33ZP24 SPI TPM TCG. + * + * This device driver implements the TPM interface as defined in + * the TCG TPM Interface Spec version 1.21, revision 1.0 and the + * STMicroelectronics Protocol Stack Specification version 1.2.0. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <spi.h> +#include <tpm.h> +#include <errno.h> +#include <linux/types.h> +#include <asm/unaligned.h> +#include <linux/compat.h> + +#include "tpm_tis.h" +#include "tpm_internal.h" + +#define TPM_ACCESS 0x0 +#define TPM_STS 0x18 +#define TPM_DATA_FIFO 0x24 + +#define LOCALITY0 0 + +#define TPM_DATA_FIFO 0x24 +#define TPM_INTF_CAPABILITY 0x14 + +#define TPM_DUMMY_BYTE 0x00 +#define TPM_WRITE_DIRECTION 0x80 + +#define MAX_SPI_LATENCY 15 +#define LOCALITY0 0 + +#define ST33ZP24_OK 0x5A +#define ST33ZP24_UNDEFINED_ERR 0x80 +#define ST33ZP24_BADLOCALITY 0x81 +#define ST33ZP24_TISREGISTER_UKNOWN 0x82 +#define ST33ZP24_LOCALITY_NOT_ACTIVATED 0x83 +#define ST33ZP24_HASH_END_BEFORE_HASH_START 0x84 +#define ST33ZP24_BAD_COMMAND_ORDER 0x85 +#define ST33ZP24_INCORECT_RECEIVED_LENGTH 0x86 +#define ST33ZP24_TPM_FIFO_OVERFLOW 0x89 +#define ST33ZP24_UNEXPECTED_READ_FIFO 0x8A +#define ST33ZP24_UNEXPECTED_WRITE_FIFO 0x8B +#define ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END 0x90 +#define ST33ZP24_DUMMY_BYTES 0x00 + +/* + * TPM command can be up to 2048 byte, A TPM response can be up to + * 1024 byte. + * Between command and response, there are latency byte (up to 15 + * usually on st33zp24 2 are enough). + * + * Overall when sending a command and expecting an answer we need if + * worst case: + * 2048 (for the TPM command) + 1024 (for the TPM answer). We need + * some latency byte before the answer is available (max 15). + * We have 2048 + 1024 + 15. + */ +#define ST33ZP24_SPI_BUFFER_SIZE (TPM_BUFSIZE + (TPM_BUFSIZE / 2) +\ + MAX_SPI_LATENCY) + +struct st33zp24_spi_phy { + int latency; + + u8 tx_buf[ST33ZP24_SPI_BUFFER_SIZE]; + u8 rx_buf[ST33ZP24_SPI_BUFFER_SIZE]; +}; + +static int st33zp24_spi_status_to_errno(u8 code) +{ + switch (code) { + case ST33ZP24_OK: + return 0; + case ST33ZP24_UNDEFINED_ERR: + case ST33ZP24_BADLOCALITY: + case ST33ZP24_TISREGISTER_UKNOWN: + case ST33ZP24_LOCALITY_NOT_ACTIVATED: + case ST33ZP24_HASH_END_BEFORE_HASH_START: + case ST33ZP24_BAD_COMMAND_ORDER: + case ST33ZP24_UNEXPECTED_READ_FIFO: + case ST33ZP24_UNEXPECTED_WRITE_FIFO: + case ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END: + return -EPROTO; + case ST33ZP24_INCORECT_RECEIVED_LENGTH: + case ST33ZP24_TPM_FIFO_OVERFLOW: + return -EMSGSIZE; + case ST33ZP24_DUMMY_BYTES: + return -ENOSYS; + } + return code; +} + +/* + * st33zp24_spi_send + * Send byte to TPM register according to the ST33ZP24 SPI protocol. + * @param: tpm, the chip description + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, The length of the data + * @return: should be zero if success else a negative error code. + */ +static int st33zp24_spi_write(struct udevice *dev, u8 tpm_register, + const u8 *tpm_data, size_t tpm_size) +{ + int total_length = 0, ret; + struct spi_slave *slave = dev_get_parent_priv(dev); + struct st33zp24_spi_phy *phy = dev_get_platdata(dev); + + u8 *tx_buf = (u8 *)phy->tx_buf; + u8 *rx_buf = phy->rx_buf; + + tx_buf[total_length++] = TPM_WRITE_DIRECTION | LOCALITY0; + tx_buf[total_length++] = tpm_register; + + if (tpm_size > 0 && tpm_register == TPM_DATA_FIFO) { + tx_buf[total_length++] = tpm_size >> 8; + tx_buf[total_length++] = tpm_size; + } + memcpy(tx_buf + total_length, tpm_data, tpm_size); + total_length += tpm_size; + + memset(tx_buf + total_length, TPM_DUMMY_BYTE, phy->latency); + + total_length += phy->latency; + + ret = spi_claim_bus(slave); + if (ret < 0) + return ret; + + ret = spi_xfer(slave, total_length * 8, tx_buf, rx_buf, + SPI_XFER_BEGIN | SPI_XFER_END); + if (ret < 0) + return ret; + + spi_release_bus(slave); + + if (ret == 0) + ret = rx_buf[total_length - 1]; + + return st33zp24_spi_status_to_errno(ret); +} + +/* + * spi_st33zp24_spi_read8_reg + * Recv byte from the TIS register according to the ST33ZP24 SPI protocol. + * @param: tpm, the chip description + * @param: tpm_loc, the locality to read register from + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: should be zero if success else a negative error code. + */ +static u8 st33zp24_spi_read8_reg(struct udevice *dev, u8 tpm_register, + u8 *tpm_data, size_t tpm_size) +{ + int total_length = 0, ret; + struct spi_slave *slave = dev_get_parent_priv(dev); + struct st33zp24_spi_phy *phy = dev_get_platdata(dev); + + u8 *tx_buf = (u8 *)phy->tx_buf; + u8 *rx_buf = phy->rx_buf; + + /* Pre-Header */ + tx_buf[total_length++] = LOCALITY0; + tx_buf[total_length++] = tpm_register; + + memset(&tx_buf[total_length], TPM_DUMMY_BYTE, + phy->latency + tpm_size); + total_length += phy->latency + tpm_size; + + ret = spi_claim_bus(slave); + if (ret < 0) + return 0; + + ret = spi_xfer(slave, total_length * 8, tx_buf, rx_buf, + SPI_XFER_BEGIN | SPI_XFER_END); + if (ret < 0) + return 0; + + spi_release_bus(slave); + + if (tpm_size > 0 && ret == 0) { + ret = rx_buf[total_length - tpm_size - 1]; + memcpy(tpm_data, rx_buf + total_length - tpm_size, tpm_size); + } + return ret; +} + +/* + * st33zp24_spi_recv + * Recv byte from the TIS register according to the ST33ZP24 SPI protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: number of byte read successfully: should be one if success. + */ +static int st33zp24_spi_read(struct udevice *dev, u8 tpm_register, + u8 *tpm_data, size_t tpm_size) +{ + int ret; + + ret = st33zp24_spi_read8_reg(dev, tpm_register, tpm_data, tpm_size); + if (!st33zp24_spi_status_to_errno(ret)) + return tpm_size; + + return ret; +} + +static int st33zp24_spi_evaluate_latency(struct udevice *dev) +{ + int latency = 1, status = 0; + u8 data = 0; + struct st33zp24_spi_phy *phy = dev_get_platdata(dev); + + while (!status && latency < MAX_SPI_LATENCY) { + phy->latency = latency; + status = st33zp24_spi_read8_reg(dev, TPM_INTF_CAPABILITY, + &data, 1); + latency++; + } + if (status < 0) + return status; + if (latency == MAX_SPI_LATENCY) + return -ENODEV; + + return latency - 1; +} + +/* + * st33zp24_spi_release_locality release the active locality + * @param: chip, the tpm chip description. + */ +static void st33zp24_spi_release_locality(struct udevice *dev) +{ + u8 data = TPM_ACCESS_ACTIVE_LOCALITY; + + st33zp24_spi_write(dev, TPM_ACCESS, &data, 1); +} + +/* + * st33zp24_spi_check_locality if the locality is active + * @param: chip, the tpm chip description + * @return: the active locality or -EACCES. + */ +static int st33zp24_spi_check_locality(struct udevice *dev) +{ + u8 data; + u8 status; + struct tpm_chip *chip = dev_get_priv(dev); + + status = st33zp24_spi_read(dev, TPM_ACCESS, &data, 1); + if (status && (data & + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) + return chip->locality; + + return -EACCES; +} + +/* + * st33zp24_spi_request_locality request the TPM locality + * @param: chip, the chip description + * @return: the active locality or negative value. + */ +static int st33zp24_spi_request_locality(struct udevice *dev) +{ + unsigned long start, stop; + long ret; + u8 data; + struct tpm_chip *chip = dev_get_priv(dev); + + if (st33zp24_spi_check_locality(dev) == chip->locality) + return chip->locality; + + data = TPM_ACCESS_REQUEST_USE; + ret = st33zp24_spi_write(dev, TPM_ACCESS, &data, 1); + if (ret < 0) + return ret; + + /* wait for locality activated */ + start = get_timer(0); + stop = chip->timeout_a; + do { + if (st33zp24_spi_check_locality(dev) >= 0) + return chip->locality; + udelay(TPM_TIMEOUT_MS * 1000); + } while (get_timer(start) < stop); + + return -EACCES; +} + +/* + * st33zp24_spi_status return the TPM_STS register + * @param: chip, the tpm chip description + * @return: the TPM_STS register value. + */ +static u8 st33zp24_spi_status(struct udevice *dev) +{ + u8 data; + + st33zp24_spi_read(dev, TPM_STS, &data, 1); + return data; +} + +/* + * st33zp24_spi_get_burstcount return the burstcount address 0x19 0x1A + * @param: chip, the chip description + * return: the burstcount or -TPM_DRIVER_ERR in case of error. + */ +static int st33zp24_spi_get_burstcount(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + unsigned long start, stop; + int burstcnt, status; + u8 tpm_reg, temp; + + /* wait for burstcount */ + start = get_timer(0); + stop = chip->timeout_d; + do { + tpm_reg = TPM_STS + 1; + status = st33zp24_spi_read(dev, tpm_reg, &temp, 1); + if (status < 0) + return -EBUSY; + + tpm_reg = TPM_STS + 2; + burstcnt = temp; + status = st33zp24_spi_read(dev, tpm_reg, &temp, 1); + if (status < 0) + return -EBUSY; + + burstcnt |= temp << 8; + if (burstcnt) + return burstcnt; + udelay(TIS_SHORT_TIMEOUT_MS * 1000); + } while (get_timer(start) < stop); + + return -EBUSY; +} + +/* + * st33zp24_spi_cancel, cancel the current command execution or + * set STS to COMMAND READY. + * @param: chip, tpm_chip description. + */ +static void st33zp24_spi_cancel(struct udevice *dev) +{ + u8 data; + + data = TPM_STS_COMMAND_READY; + st33zp24_spi_write(dev, TPM_STS, &data, 1); +} + +/* + * st33zp24_spi_wait_for_stat wait for a TPM_STS value + * @param: chip, the tpm chip description + * @param: mask, the value mask to wait + * @param: timeout, the timeout + * @param: status, + * @return: the tpm status, 0 if success, -ETIME if timeout is reached. + */ +static int st33zp24_spi_wait_for_stat(struct udevice *dev, u8 mask, + unsigned long timeout, int *status) +{ + unsigned long start, stop; + + /* Check current status */ + *status = st33zp24_spi_status(dev); + if ((*status & mask) == mask) + return 0; + + start = get_timer(0); + stop = timeout; + do { + udelay(TPM_TIMEOUT_MS * 1000); + *status = st33zp24_spi_status(dev); + if ((*status & mask) == mask) + return 0; + } while (get_timer(start) < stop); + + return -ETIME; +} + +/* + * st33zp24_spi_recv_data receive data + * @param: chip, the tpm chip description + * @param: buf, the buffer where the data are received + * @param: count, the number of data to receive + * @return: the number of bytes read from TPM FIFO. + */ +static int st33zp24_spi_recv_data(struct udevice *dev, u8 *buf, size_t count) +{ + struct tpm_chip *chip = dev_get_priv(dev); + int size = 0, burstcnt, len, ret, status; + + while (size < count && + st33zp24_spi_wait_for_stat(dev, TPM_STS_DATA_AVAIL | TPM_STS_VALID, + chip->timeout_c, &status) == 0) { + burstcnt = st33zp24_spi_get_burstcount(dev); + if (burstcnt < 0) + return burstcnt; + len = min_t(int, burstcnt, count - size); + ret = st33zp24_spi_read(dev, TPM_DATA_FIFO, buf + size, len); + if (ret < 0) + return ret; + + size += len; + } + return size; +} + +/* + * st33zp24_spi_recv received TPM response through TPM phy. + * @param: chip, tpm_chip description. + * @param: buf, the buffer to store data. + * @param: count, the number of bytes that can received (sizeof buf). + * @return: Returns zero in case of success else -EIO. + */ +static int st33zp24_spi_recv(struct udevice *dev, u8 *buf, size_t count) +{ + struct tpm_chip *chip = dev_get_priv(dev); + int size, expected; + + if (!chip) + return -ENODEV; + + if (count < TPM_HEADER_SIZE) { + size = -EIO; + goto out; + } + + size = st33zp24_spi_recv_data(dev, buf, TPM_HEADER_SIZE); + if (size < TPM_HEADER_SIZE) { + debug("TPM error, unable to read header\n"); + goto out; + } + + expected = get_unaligned_be32(buf + 2); + if (expected > count) { + size = -EIO; + goto out; + } + + size += st33zp24_spi_recv_data(dev, &buf[TPM_HEADER_SIZE], + expected - TPM_HEADER_SIZE); + if (size < expected) { + debug("TPM error, unable to read remaining bytes of result\n"); + size = -EIO; + goto out; + } + +out: + st33zp24_spi_cancel(dev); + st33zp24_spi_release_locality(dev); + + return size; +} + +/* + * st33zp24_spi_send send TPM commands through TPM phy. + * @param: chip, tpm_chip description. + * @param: buf, the buffer to send. + * @param: len, the number of bytes to send. + * @return: Returns zero in case of success else the negative error code. + */ +static int st33zp24_spi_send(struct udevice *dev, const u8 *buf, size_t len) +{ + struct tpm_chip *chip = dev_get_priv(dev); + u32 i, size; + int burstcnt, ret, status; + u8 data, tpm_stat; + + if (!chip) + return -ENODEV; + if (len < TPM_HEADER_SIZE) + return -EIO; + + ret = st33zp24_spi_request_locality(dev); + if (ret < 0) + return ret; + + tpm_stat = st33zp24_spi_status(dev); + if ((tpm_stat & TPM_STS_COMMAND_READY) == 0) { + st33zp24_spi_cancel(dev); + if (st33zp24_spi_wait_for_stat(dev, TPM_STS_COMMAND_READY, + chip->timeout_b, &status) < 0) { + ret = -ETIME; + goto out_err; + } + } + + for (i = 0; i < len - 1;) { + burstcnt = st33zp24_spi_get_burstcount(dev); + if (burstcnt < 0) + return burstcnt; + + size = min_t(int, len - i - 1, burstcnt); + ret = st33zp24_spi_write(dev, TPM_DATA_FIFO, buf + i, size); + if (ret < 0) + goto out_err; + + i += size; + } + + tpm_stat = st33zp24_spi_status(dev); + if ((tpm_stat & TPM_STS_DATA_EXPECT) == 0) { + ret = -EIO; + goto out_err; + } + + ret = st33zp24_spi_write(dev, TPM_DATA_FIFO, buf + len - 1, 1); + if (ret < 0) + goto out_err; + + tpm_stat = st33zp24_spi_status(dev); + if ((tpm_stat & TPM_STS_DATA_EXPECT) != 0) { + ret = -EIO; + goto out_err; + } + + data = TPM_STS_GO; + ret = st33zp24_spi_write(dev, TPM_STS, &data, 1); + if (ret < 0) + goto out_err; + + return len; + +out_err: + st33zp24_spi_cancel(dev); + st33zp24_spi_release_locality(dev); + + return ret; +} + +static int st33zp24_spi_cleanup(struct udevice *dev) +{ + st33zp24_spi_cancel(dev); + /* + * The TPM needs some time to clean up here, + * so we sleep rather than keeping the bus busy + */ + mdelay(2); + st33zp24_spi_release_locality(dev); + + return 0; +} + +static int st33zp24_spi_init(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + struct st33zp24_spi_phy *phy = dev_get_platdata(dev); + + chip->is_open = 1; + + /* Default timeouts - these could move to the device tree */ + chip->timeout_a = TIS_SHORT_TIMEOUT_MS; + chip->timeout_b = TIS_LONG_TIMEOUT_MS; + chip->timeout_c = TIS_SHORT_TIMEOUT_MS; + chip->timeout_d = TIS_SHORT_TIMEOUT_MS; + + chip->locality = LOCALITY0; + + phy->latency = st33zp24_spi_evaluate_latency(dev); + if (phy->latency <= 0) + return -ENODEV; + + /* + * A timeout query to TPM can be placed here. + * Standard timeout values are used so far + */ + + return 0; +} + +static int st33zp24_spi_open(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + int rc; + + debug("%s: start\n", __func__); + if (chip->is_open) + return -EBUSY; + + rc = st33zp24_spi_init(dev); + if (rc < 0) + chip->is_open = 0; + + return rc; +} + +static int st33zp24_spi_close(struct udevice *dev) +{ + struct tpm_chip *chip = dev_get_priv(dev); + + if (chip->is_open) { + st33zp24_spi_release_locality(dev); + chip->is_open = 0; + chip->vend_dev = 0; + } + + return 0; +} + +static int st33zp24_spi_get_desc(struct udevice *dev, char *buf, int size) +{ + struct tpm_chip *chip = dev_get_priv(dev); + + if (size < 50) + return -ENOSPC; + + return snprintf(buf, size, "1.2 TPM (%s, chip type %s device-id 0x%x)", + chip->is_open ? "open" : "closed", + dev->name, + chip->vend_dev >> 16); +} + +const struct tpm_ops st33zp24_spi_tpm_ops = { + .open = st33zp24_spi_open, + .close = st33zp24_spi_close, + .recv = st33zp24_spi_recv, + .send = st33zp24_spi_send, + .cleanup = st33zp24_spi_cleanup, + .get_desc = st33zp24_spi_get_desc, +}; + +static int st33zp24_spi_probe(struct udevice *dev) +{ + struct tpm_chip_priv *uc_priv = dev_get_uclass_priv(dev); + + uc_priv->duration_ms[TPM_SHORT] = TIS_SHORT_TIMEOUT_MS; + uc_priv->duration_ms[TPM_MEDIUM] = TIS_LONG_TIMEOUT_MS; + uc_priv->duration_ms[TPM_LONG] = TIS_LONG_TIMEOUT_MS; + uc_priv->retry_time_ms = TPM_TIMEOUT_MS; + + debug("ST33ZP24 SPI TPM from STMicroelectronics found\n"); + + return 0; +} + +static int st33zp24_spi_remove(struct udevice *dev) +{ + st33zp24_spi_release_locality(dev); + + return 0; +} + +static const struct udevice_id st33zp24_spi_ids[] = { + { .compatible = "st,st33zp24-spi" }, + { } +}; + +U_BOOT_DRIVER(st33zp24_spi_spi) = { + .name = "st33zp24-spi", + .id = UCLASS_TPM, + .of_match = of_match_ptr(st33zp24_spi_ids), + .probe = st33zp24_spi_probe, + .remove = st33zp24_spi_remove, + .ops = &st33zp24_spi_tpm_ops, + .priv_auto_alloc_size = sizeof(struct tpm_chip), + .platdata_auto_alloc_size = sizeof(struct st33zp24_spi_phy), +};