This patch adds required macros for enabling SATA.

Signed-off-by: Vasanth Ananthan vasanth.a@samsung.com --- include/configs/smdk5250.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index e412da8..67cdbe2 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -68,7 +68,7 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))

/* select serial console configuration */ -#define CONFIG_SERIAL3 /* use SERIAL 3 */ +#define CONFIG_SERIAL2 /* use SERIAL 2 */ #define CONFIG_BAUDRATE 115200 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000

@@ -97,6 +97,7 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_NET +#define CONFIG_CMD_SATA

#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK @@ -192,8 +193,6 @@ #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)

-#define CONFIG_DOS_PARTITION - #define CONFIG_IRAM_STACK 0x02050000

#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) @@ -259,4 +258,14 @@ /* Enable devicetree support */ #define CONFIG_OF_LIBFDT

+/* Enable SATA */ +#ifdef CONFIG_CMD_SATA + #define CONFIG_DWC_AHSATA + #define CONFIG_SYS_SATA_MAX_DEVICE 1 + #define CONFIG_DWC_AHSATA_PORT_ID 0 + #define CONFIG_DWC_AHSATA_BASE_ADDR EXYNOS5_SATA_BASE + #define CONFIG_LBA48 + #define CONFIG_LIBATA +#endif + #endif /* __CONFIG_H */