Change the implementation for ARM V7 to relocate the code to an arbitrary address in RAM.

Adapt the Beagle board (Cortex A8) to test the changes.

Signed-off-by: Heiko Schocher hs@denx.de --- - changes since v1: - removed converted but not tested boards - add CONFIG_SYS_ARM_WITHOUT_RELOC

arch/arm/cpu/armv7/mx51/u-boot.lds | 14 +++- arch/arm/cpu/armv7/omap3/emif4.c | 34 +++++++ arch/arm/cpu/armv7/omap3/sdrc.c | 38 +++++++ arch/arm/cpu/armv7/start.S | 191 +++++++++++++++++++++++++++++++++++- arch/arm/cpu/armv7/u-boot.lds | 14 +++- board/ti/beagle/config.mk | 2 +- include/configs/omap3_beagle.h | 5 + 7 files changed, 291 insertions(+), 7 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx51/u-boot.lds b/arch/arm/cpu/armv7/mx51/u-boot.lds index d66434c..55d6599 100644 --- a/arch/arm/cpu/armv7/mx51/u-boot.lds +++ b/arch/arm/cpu/armv7/mx51/u-boot.lds @@ -44,10 +44,22 @@ SECTIONS .rodata : { *(.rodata) }

. = ALIGN(4); - .data : { *(.data) } + .data : { + *(.data) + __datarel_start = .; + *(.data.rel) + __datarelrolocal_start = .; + *(.data.rel.ro.local) + __datarellocal_start = .; + *(.data.rel.local) + __datarelro_start = .; + *(.data.rel.ro) + }

+ __got_start = .; . = ALIGN(4); .got : { *(.got) } + __got_end = .;

. = .; __u_boot_cmd_start = .; diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index fae5b11..da2cd90 100644 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -136,6 +136,7 @@ void do_emif4_init(void) * dram_init - * - Sets uboots idea of sdram size */ +#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -157,6 +158,39 @@ int dram_init(void)

return 0; } +#else +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) + size1 = get_sdr_cs_size(CS1); + + gd->ram_size = size0 + size1; + return 0; +} + +void dram_init_banksize (void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; +} +#endif

/* * mem_init() - diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 96fd990..3d4836b 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -164,6 +164,7 @@ void do_sdrc_init(u32 cs, u32 early) * dram_init - * - Sets uboots idea of sdram size */ +#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -189,6 +190,43 @@ int dram_init(void)

return 0; } +#else +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { + do_sdrc_init(CS1, NOT_EARLY); + make_cs1_contiguous(); + + size1 = get_sdr_cs_size(CS1); + } + gd->ram_size = size0 + size1; + + return 0; +} + +void dram_init_banksize (void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; +} +#endif

/* * mem_init - diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 1e0a150..f411c0f 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -65,12 +65,15 @@ _end_vect: * *************************************************************************/

+.globl _TEXT_BASE _TEXT_BASE: .word TEXT_BASE

+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) .globl _armboot_start _armboot_start: .word _start +#endif

/* * These are defined in the board-specific linker script. @@ -95,6 +98,176 @@ FIQ_STACK_START: .word 0x0badc0de #endif

+#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de + +.globl _datarel_start +_datarel_start: + .word __datarel_start + +.globl _datarelrolocal_start +_datarelrolocal_start: + .word __datarelrolocal_start + +.globl _datarellocal_start +_datarellocal_start: + .word __datarellocal_start + +.globl _datarelro_start +_datarelro_start: + .word __datarelro_start + +.globl _got_start +_got_start: + .word __got_start + +.globl _got_end +_got_end: + .word __got_end + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0, cpsr + bic r0, r0, #0x1f + orr r0, r0, #0xd3 + msr cpsr,r0 + +#if (CONFIG_OMAP34XX) + /* Copy vectors to mask ROM indirect addr */ + adr r0, _start @ r0 <- current position of code + add r0, r0, #4 @ skip reset vector + mov r2, #64 @ r2 <- size to copy + add r2, r0, r2 @ r2 <- source end address + mov r1, #SRAM_OFFSET0 @ build vect addr + mov r3, #SRAM_OFFSET1 + add r1, r1, r3 + mov r3, #SRAM_OFFSET2 + add r1, r1, r3 +next: + ldmia r0!, {r3 - r10} @ copy from source address [r0] + stmia r1!, {r3 - r10} @ copy to target address [r1] + cmp r0, r2 @ until source end address [r2] + bne next @ loop until equal */ +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) + /* No need to copy/exec the clock code - DPLL adjust already done + * in NAND/oneNAND Boot. + */ + bl cpy_clk_code @ put dpll adjust code behind vectors +#endif /* NAND Boot */ +#endif + /* the mask ROM code should have PLL and others stable */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + bl cpu_init_crit +#endif + +/* Set stackpointer in internal RAM to call board_init_f */ +call_board_init_f: + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + ldr r0,=0x00000000 + bl board_init_f + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + */ + .globl relocate_code +relocate_code: + mov r4, r0 /* save addr_sp */ + mov r5, r1 /* save addr of gd */ + mov r6, r2 /* save addr of destination */ + mov r7, r2 /* save addr of destination */ + + /* Set up the stack */ +stack_setup: + mov sp, r4 + +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + adr r0, _start + ldr r2, _TEXT_BASE + ldr r3, _bss_start + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ + cmp r0, r6 +#ifndef CONFIG_PRELOADER + beq jump_2_ram +#endif + +copy_loop: + ldmia r0!, {r9-r10} /* copy from source address [r0] */ + stmia r6!, {r9-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop + +#ifndef CONFIG_PRELOADER + /* fix got entries */ + ldr r1, _TEXT_BASE + mov r0, r7 /* reloc addr */ + ldr r2, _got_start /* addr in Flash */ + ldr r3, _got_end /* addr in Flash */ + sub r3, r3, r1 + add r3, r3, r0 + sub r2, r2, r1 + add r2, r2, r0 + +fixloop: + ldr r4, [r2] + sub r4, r4, r1 + add r4, r4, r0 + str r4, [r2] + add r2, r2, #4 + cmp r2, r3 + bne fixloop + +clear_bss: + ldr r0, _bss_start + ldr r1, _bss_end + ldr r3, _TEXT_BASE /* Text base */ + mov r4, r7 /* reloc addr */ + sub r0, r0, r3 + add r0, r0, r4 + sub r1, r1, r3 + add r1, r1, r4 + mov r2, #0x00000000 /* clear */ + +clbss_l:str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + bne clbss_l +#endif /* #ifndef CONFIG_PRELOADER */ +#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ +jump_2_ram: + ldr r0, _TEXT_BASE + ldr r2, _board_init_r + sub r2, r2, r0 + add r2, r2, r7 /* position from board_init_r in RAM */ + /* setup parameters for board_init_r */ + mov r0, r5 /* gd_t */ + mov r1, r7 /* dest_addr */ + /* jump to it ... */ + mov lr, r2 + mov pc, lr + +_board_init_r: .word board_init_r +#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ /* * the actual reset code */ @@ -180,7 +353,7 @@ clbss_l: ldr pc, _start_armboot @ jump to C code

_start_armboot: .word start_armboot - +#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */

/************************************************************************* * @@ -263,11 +436,14 @@ cpu_init_crit: @ user stack stmia sp, {r0 - r12} @ Save user registers (now in @ svc mode) r0-r12 - +#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ set base 2 words into abort +#else + ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort @ stack +#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc @ and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -303,11 +479,14 @@ cpu_init_crit: .endm

.macro get_bad_stack +#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack (enter - @ in banked mode) sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move to reserved a couple - @ spots for abort stack +#else + ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter + @ in banked mode) +#endif

str lr, [r13] @ save caller lr in position 0 @ of saved stack @@ -328,10 +507,14 @@ cpu_init_crit: sub r13, r13, #4 @ space on current stack for @ scratch reg. str r0, [r13] @ save R0's value. +#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r0, _armboot_start @ get data regions start sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move past gbl and a couple +#else + ldr r0, IRQ_STACK_START_IN @ get data regions start @ spots for abort stack +#endif str lr, [r0] @ save caller lr in position 0 @ of saved stack mrs r0, spsr @ get the spsr diff --git a/arch/arm/cpu/armv7/u-boot.lds b/arch/arm/cpu/armv7/u-boot.lds index 9e5b5a9..d4fd3fc 100644 --- a/arch/arm/cpu/armv7/u-boot.lds +++ b/arch/arm/cpu/armv7/u-boot.lds @@ -42,10 +42,22 @@ SECTIONS .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }

. = ALIGN(4); - .data : { *(.data) } + .data : { + *(.data) + __datarel_start = .; + *(.data.rel) + __datarelrolocal_start = .; + *(.data.rel.ro.local) + __datarellocal_start = .; + *(.data.rel.local) + __datarelro_start = .; + *(.data.rel.ro) + }

+ __got_start = .; . = ALIGN(4); .got : { *(.got) } + __got_end = .;

__u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } diff --git a/board/ti/beagle/config.mk b/board/ti/beagle/config.mk index 879b2e2..6fb10e3 100644 --- a/board/ti/beagle/config.mk +++ b/board/ti/beagle/config.mk @@ -30,4 +30,4 @@ # (mem base + reserved)

# For use with external or internal boots. -TEXT_BASE = 0x80e80000 +TEXT_BASE = 0x80008000 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index b066d4d..9ae40ec 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -336,4 +336,9 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif

+/* additions for new relocation code, must added to all boards */ +#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) + #endif /* __CONFIG_H */