A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere.

Signed-off-by: Michal Simek michal.simek@xilinx.com ---

common/spl/Kconfig | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig index df5468f1ac29..b709a05a7b79 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -165,7 +165,7 @@ config SPL_BOARD_INIT provided by the board.

config SPL_BOOTROM_SUPPORT - bool "Support returning to the BOOTROM" + bool "Support returning to the BOOTROM" help Some platforms (e.g. the Rockchip RK3368) provide support in their ROM for loading the next boot-stage after performing basic setup @@ -707,7 +707,7 @@ config SYS_MMCSD_FS_BOOT_PARTITION default 1 help Partition on the MMC to load U-Boot from when the MMC is being - used in fs mode + used in fs mode

config SPL_MMC_TINY bool "Tiny MMC framework in SPL" @@ -784,8 +784,8 @@ config SPL_NAND_SIMPLE config SPL_NAND_BASE depends on SPL_NAND_DRIVERS bool "Use Base NAND Driver" - help - Include nand_base.c in the SPL. + help + Include nand_base.c in the SPL.

config SPL_NAND_IDENT depends on SPL_NAND_BASE @@ -1301,7 +1301,7 @@ config SPL_ATF_LOAD_IMAGE_V2 method, say Y.

config SPL_ATF_NO_PLATFORM_PARAM - bool "Pass no platform parameter" + bool "Pass no platform parameter" depends on SPL_ATF help While we expect to call a pointer to a valid FDT (or NULL) @@ -1395,7 +1395,7 @@ config TPL_BOOTCOUNT_LIMIT For example, it may be useful to choose the device to boot.

config TPL_LDSCRIPT - string "Linker script for the TPL stage" + string "Linker script for the TPL stage" depends on TPL default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 default "arch/$(ARCH)/cpu/u-boot-spl.lds" @@ -1409,7 +1409,7 @@ config TPL_LDSCRIPT fall back to the linker-script used for the SPL stage.

config TPL_NEEDS_SEPARATE_TEXT_BASE - bool "TPL needs a separate text-base" + bool "TPL needs a separate text-base" default n depends on TPL help @@ -1418,7 +1418,7 @@ config TPL_NEEDS_SEPARATE_TEXT_BASE .text sections of the TPL stage has to be set below.

config TPL_NEEDS_SEPARATE_STACK - bool "TPL needs a separate initial stack-pointer" + bool "TPL needs a separate initial stack-pointer" default n depends on TPL help @@ -1426,20 +1426,20 @@ config TPL_NEEDS_SEPARATE_STACK stack-pointer from the settings for the SPL stage.

config TPL_TEXT_BASE - hex "Base address for the .text section of the TPL stage" + hex "Base address for the .text section of the TPL stage" depends on TPL_NEEDS_SEPARATE_TEXT_BASE help The base address for the .text section of the TPL stage.

config TPL_MAX_SIZE - int "Maximum size (in bytes) for the TPL stage" + int "Maximum size (in bytes) for the TPL stage" default 0 depends on TPL help The maximum size (in bytes) of the TPL stage.

config TPL_STACK - hex "Address of the initial stack-pointer for the TPL stage" + hex "Address of the initial stack-pointer for the TPL stage" depends on TPL_NEEDS_SEPARATE_STACK help The address of the initial stack-pointer for the TPL stage. @@ -1457,7 +1457,7 @@ config TPL_READ_ONLY device-private data.

config TPL_BOOTROM_SUPPORT - bool "Support returning to the BOOTROM (from TPL)" + bool "Support returning to the BOOTROM (from TPL)" help Some platforms (e.g. the Rockchip RK3368) provide support in their ROM for loading the next boot-stage after performing basic setup