On Wed, Dec 2, 2015 at 7:52 PM, Michal Simek michal.simek@xilinx.com wrote:

Remove this c&p error from s5p driver.

Signed-off-by: Michal Simek michal.simek@xilinx.com

drivers/serial/Kconfig | 2 +- drivers/serial/serial_zynq.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e57c9ceb18ec..353fd2d25063 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -102,7 +102,7 @@ config DEBUG_UART_UARTLITE config DEBUG_UART_ZYNQ bool "Xilinx Zynq" help

•     Select this to enable a debug UART using the serial_s5p driver. You
  

•     Select this to enable a debug UART using the serial_zynq driver. You
      will need to provide parameters to make this work. The driver will
      be available until the real driver-model serial is running.
  
  

diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 88bebed23638..6807f0f812f5 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -180,7 +180,7 @@ static const struct udevice_id zynq_serial_ids[] = { { } };

-U_BOOT_DRIVER(serial_s5p) = { +U_BOOT_DRIVER(serial_zynq) = { .name = "serial_zynq", .id = UCLASS_SERIAL, .of_match = zynq_serial_ids, --

Reviewed-by: Bin Meng bmeng.cn@gmail.com