Hello, We have now managed to partly port U-boot1.0.2 to our custom board. What we can see, with BDI2000 and printf:s, is that the code always reaches board_init_r i.e. We are in RAM.

I am using the PQ2FADS code as base since we are using a Motorola PPC8270.

Now the problems start. I have encountered some strange things:

1. Variable flash_info[], introduced in file flash.c is pointing to flash! Some other variables are also pointing to either flash or 0xffffffff, they should point to some address in RAM.

2. If I run the code on the board without BDI2000, it always crashes sometime after flash_init...

3. If I run the code on the board with BDI2000 along with breakpoints in say board_init_r, cpu_init_r, console_init_r, main_loop I can get all the way to the main_loop and the "CLI"...

Can anybody give me a hint where to look for broken code...

Thanks // Matias