[U-Boot] Pull request u-boot-blackfin.git
The following changes since commit 89c95f0cd3f8140f3b8a82a22a6a144c148d09c6:
asm-offsets: generate bd_t size (2011-01-09 18:08:20 +0100)
are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git master
Andreas Schallenberg (1): Blackfin: dnp5370: new board port
Chong Huang (1): Blackfin: bf525-ucr2: new board port
Cliff Cai (1): Blackfin: bfin_sdh: set all timer bits before transfer
Mike Frysinger (27): MAINTAINERS: sort Blackfin entries Blackfin: bf518f-ezbrd: don't require SPI logic all the time Blackfin: skip RAM display for 0 mem systems Blackfin: drop CONFIG_SYS_TEXT_BASE from boards Blackfin: unify bootmode based LDR_FLAGS setup Blackfin: move CONFIG_BFIN_CPU back to board config.h Blackfin: bf527-sdp: update custom CFLAGS paths Blackfin: bf537-pnav/blackstamp/blackvme: drop empty config.mk files Blackfin: serial: clean up muxing a bit Blackfin: bf537-minotaur/bf537-srv1: undefine nfs when net is disabled Blackfin: bf537: fix L1 data defines Blackfin: bf561-ezkit/ibf-dsp561: invert env offset/addr logic Blackfin: fix bd_t handling Blackfin: BF50x: new processor port Blackfin: drop duplicate system mmr and L1 scratch defines Blackfin: BF52x: unify duplicated headers Blackfin: BF537: unify duplicated headers Blackfin: only check for os log when we have external memory Blackfin: turn off caches when self initializing Blackfin: default to L1 bank A when L1 bank B does not exist Blackfin: bf506f-ezkit: new board port Blackfin: adi boards: drop old ELF define Blackfin: bootrom.h: sync with toolchain Blackfin: bootldr: use common defines Blackfin: ldrinfo: new command Blackfin: adi boards: enable ldrinfo Blackfin: adi boards: enable CONFIG_MONITOR_IS_IN_RAM
Sonic Zhang (1): Blackfin: bfin_sdh: add support for multiblock operations
MAINTAINERS | 54 +- arch/blackfin/config.mk | 15 +- arch/blackfin/cpu/gpio.c | 8 +- arch/blackfin/cpu/initcode.c | 25 +- arch/blackfin/cpu/serial.h | 72 +- arch/blackfin/cpu/start.S | 45 +- arch/blackfin/include/asm/blackfin_cdef.h | 6 + arch/blackfin/include/asm/blackfin_def.h | 10 + arch/blackfin/include/asm/config.h | 10 +- arch/blackfin/include/asm/mach-bf506/BF504_cdef.h | 1782 ++++++++++++++++++++ arch/blackfin/include/asm/mach-bf506/BF504_def.h | 944 +++++++++++ arch/blackfin/include/asm/mach-bf506/BF506_cdef.h | 11 + arch/blackfin/include/asm/mach-bf506/BF506_def.h | 11 + arch/blackfin/include/asm/mach-bf506/anomaly.h | 128 ++ arch/blackfin/include/asm/mach-bf506/def_local.h | 5 + arch/blackfin/include/asm/mach-bf506/gpio.h | 52 + arch/blackfin/include/asm/mach-bf506/portmux.h | 148 ++ arch/blackfin/include/asm/mach-bf506/ports.h | 59 + arch/blackfin/include/asm/mach-bf518/BF512_def.h | 6 - .../asm/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h | 994 ----------- .../asm/mach-bf527/ADSP-EDN-BF52x-extended_def.h | 503 ------ arch/blackfin/include/asm/mach-bf527/BF522_cdef.h | 986 +++++++++++- arch/blackfin/include/asm/mach-bf527/BF522_def.h | 495 ++++++- arch/blackfin/include/asm/mach-bf527/BF524_cdef.h | 20 +- arch/blackfin/include/asm/mach-bf527/BF524_def.h | 12 +- arch/blackfin/include/asm/mach-bf527/BF526_cdef.h | 358 +---- arch/blackfin/include/asm/mach-bf527/BF526_def.h | 181 +-- arch/blackfin/include/asm/mach-bf533/BF531_def.h | 6 - arch/blackfin/include/asm/mach-bf533/BF532_def.h | 6 - arch/blackfin/include/asm/mach-bf533/BF533_def.h | 6 - .../asm/mach-bf537/ADSP-EDN-BF534-extended_cdef.h | 1624 ------------------ .../asm/mach-bf537/ADSP-EDN-BF534-extended_def.h | 819 --------- arch/blackfin/include/asm/mach-bf537/BF534_cdef.h | 1614 ++++++++++++++++++- arch/blackfin/include/asm/mach-bf537/BF534_def.h | 816 +++++++++- arch/blackfin/include/asm/mach-bf538/BF538_def.h | 6 - arch/blackfin/include/asm/mach-bf561/BF561_def.h | 7 +- .../include/asm/mach-common/bits/bootrom.h | 86 +- arch/blackfin/lib/board.c | 21 +- arch/blackfin/lib/u-boot.lds.S | 10 +- board/bct-brettl2/config.mk | 8 - .../config.mk => bf506f-ezkit/Makefile} | 34 +- board/bf506f-ezkit/bf506f-ezkit.c | 27 + board/bf518f-ezbrd/bf518f-ezbrd.c | 30 +- board/bf518f-ezbrd/config.mk | 8 - .../{blackstamp/config.mk => bf525-ucr2/Makefile} | 34 +- board/bf525-ucr2/bf525-ucr2.c | 16 + board/bf526-ezbrd/config.mk | 8 - board/bf527-ad7160-eval/config.mk | 8 - board/bf527-ezkit/config.mk | 8 - board/bf527-sdp/config.mk | 10 +- board/bf533-ezkit/config.mk | 6 - board/bf533-stamp/config.mk | 6 - board/bf537-minotaur/config.mk | 8 +- board/bf537-srv1/config.mk | 8 +- board/bf537-stamp/config.mk | 6 - board/bf538f-ezkit/config.mk | 6 - board/bf548-ezkit/config.mk | 6 - board/bf561-acvilon/config.mk | 6 - board/bf561-ezkit/config.mk | 6 - board/cm-bf527/config.mk | 8 - board/cm-bf533/config.mk | 6 - board/cm-bf537e/config.mk | 6 - board/cm-bf537u/config.mk | 6 - board/cm-bf548/config.mk | 6 - board/cm-bf561/config.mk | 6 - board/{blackvme/config.mk => dnp5370/Makefile} | 36 +- board/dnp5370/dnp5370.c | 104 ++ board/ibf-dsp561/config.mk | 6 - board/ip04/config.mk | 6 - board/tcm-bf518/config.mk | 8 - board/tcm-bf537/config.mk | 6 - boards.cfg | 3 + common/Makefile | 1 + common/cmd_bootldr.c | 21 +- common/cmd_ldrinfo.c | 192 +++ doc/README.dnp5370 | 67 + drivers/mmc/bfin_sdh.c | 13 +- drivers/spi/bfin_spi.c | 2 + include/configs/bct-brettl2.h | 3 +- include/configs/bf506f-ezkit.h | 107 ++ include/configs/bf518f-ezbrd.h | 1 + include/configs/bf525-ucr2.h | 102 ++ include/configs/bf526-ezbrd.h | 1 + include/configs/bf527-ad7160-eval.h | 1 + include/configs/bf527-ezkit.h | 1 + include/configs/bf527-sdp.h | 1 + include/configs/bf533-ezkit.h | 1 + include/configs/bf533-stamp.h | 1 + include/configs/bf537-minotaur.h | 2 + include/configs/bf537-pnav.h | 1 + include/configs/bf537-srv1.h | 2 + include/configs/bf537-stamp.h | 1 + include/configs/bf538f-ezkit.h | 1 + include/configs/bf548-ezkit.h | 1 + include/configs/bf561-acvilon.h | 3 +- include/configs/bf561-ezkit.h | 5 +- include/configs/bfin_adi_common.h | 3 +- include/configs/blackstamp.h | 1 + include/configs/blackvme.h | 3 +- include/configs/cm-bf527.h | 1 + include/configs/cm-bf533.h | 1 + include/configs/cm-bf537e.h | 1 + include/configs/cm-bf537u.h | 1 + include/configs/cm-bf548.h | 1 + include/configs/cm-bf561.h | 1 + include/configs/dnp5370.h | 128 ++ include/configs/ibf-dsp561.h | 5 +- include/configs/ip04.h | 1 + include/configs/tcm-bf518.h | 1 + include/configs/tcm-bf537.h | 1 + 110 files changed, 8188 insertions(+), 4909 deletions(-) create mode 100644 arch/blackfin/include/asm/mach-bf506/BF504_cdef.h create mode 100644 arch/blackfin/include/asm/mach-bf506/BF504_def.h create mode 100644 arch/blackfin/include/asm/mach-bf506/BF506_cdef.h create mode 100644 arch/blackfin/include/asm/mach-bf506/BF506_def.h create mode 100644 arch/blackfin/include/asm/mach-bf506/anomaly.h create mode 100644 arch/blackfin/include/asm/mach-bf506/def_local.h create mode 100644 arch/blackfin/include/asm/mach-bf506/gpio.h create mode 100644 arch/blackfin/include/asm/mach-bf506/portmux.h create mode 100644 arch/blackfin/include/asm/mach-bf506/ports.h delete mode 100644 arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h delete mode 100644 arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_def.h delete mode 100644 arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_cdef.h delete mode 100644 arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_def.h rename board/{bf537-pnav/config.mk => bf506f-ezkit/Makefile} (57%) create mode 100644 board/bf506f-ezkit/bf506f-ezkit.c rename board/{blackstamp/config.mk => bf525-ucr2/Makefile} (57%) create mode 100644 board/bf525-ucr2/bf525-ucr2.c rename board/{blackvme/config.mk => dnp5370/Makefile} (54%) create mode 100644 board/dnp5370/dnp5370.c create mode 100644 common/cmd_ldrinfo.c create mode 100644 doc/README.dnp5370 create mode 100644 include/configs/bf506f-ezkit.h create mode 100644 include/configs/bf525-ucr2.h create mode 100644 include/configs/dnp5370.h
Dear Mike Frysinger,
In message 1294636905-30832-1-git-send-email-vapier@gentoo.org you wrote:
The following changes since commit 89c95f0cd3f8140f3b8a82a22a6a144c148d09c6:
asm-offsets: generate bd_t size (2011-01-09 18:08:20 +0100)
are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git master
...
Mike Frysinger (27): MAINTAINERS: sort Blackfin entries
This was already applied. Why do you include it again?
Blackfin: BF50x: new processor port
...
Blackfin: BF52x: unify duplicated headers Blackfin: BF537: unify duplicated headers
I cannot find any trace of these commits on the mailing list nor in patchwork. Am I missing something?
Blackfin: bf506f-ezkit: new board port
This commit was rejected because the MAINATINERS entry is missing, yet you include it here again?
Blackfin: ldrinfo: new command
You posted a new version of the patch which added a README entry, yet here you include the old version
Not pulled.
Best regards,
Wolfgang Denk
On Wednesday, January 12, 2011 17:43:37 Wolfgang Denk wrote:
Mike Frysinger wrote:
The following changes since commit
89c95f0cd3f8140f3b8a82a22a6a144c148d09c6:
asm-offsets: generate bd_t size (2011-01-09 18:08:20 +0100)
are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git master
...
Mike Frysinger (27): MAINTAINERS: sort Blackfin entries
This was already applied. Why do you include it again?
i posted these patches and requests before you manually merged it. i dont see how this is surprising.
Blackfin: BF50x: new processor port...
Blackfin: BF52x: unify duplicated headers Blackfin: BF537: unify duplicated headersI cannot find any trace of these commits on the mailing list nor in patchwork. Am I missing something?
i mentioned in the original summary that these were too large for the list because i did quite a bit of clean up on them that isnt really splittable. -mike
Dear Mike Frysinger,
In message 201101121750.06963.vapier@gentoo.org you wrote:
I cannot find any trace of these commits on the mailing list nor in patchwork. Am I missing something?
i mentioned in the original summary that these were too large for the list because i did quite a bit of clean up on them that isnt really splittable.
You should know the rules. Please stick to them.
I will not permit you to sneak in unreviewed code like that.
Don't try that again.
Best regards,
Wolfgang Denk
On Wednesday, January 12, 2011 18:03:35 Wolfgang Denk wrote:
Mike Frysinger wrote:
I cannot find any trace of these commits on the mailing list nor in patchwork. Am I missing something?
i mentioned in the original summary that these were too large for the list because i did quite a bit of clean up on them that isnt really splittable.
You should know the rules. Please stick to them.
I will not permit you to sneak in unreviewed code like that.
Don't try that again.
stop making crap up. i'm not "sneaking" anything thing in. i explicitly called out these patches on the list and mentioned exactly where to find them. -mike
Dear Mike Frysinger,
In message 201101121808.17659.vapier@gentoo.org you wrote:
stop making crap up. i'm not "sneaking" anything thing in. i explicitly called out these patches on the list and mentioned exactly where to find them.
Did you? In some summary message nobody is going to read?
You are supposed to submit patches.
Please (re-) read http://www.denx.de/wiki/U-Boot/Patches ; some link to some git repository is NOT sufficient (especially when it comes whithout any spoecific information like commit ID or at least branch name and Subject.
As a custodian you are supposed to be especially careful and to set an example for others, less experienced developers.
Best regards,
Wolfgang Denk
On Wednesday, January 12, 2011 18:18:25 Wolfgang Denk wrote:
Mike Frysinger wrote:
stop making crap up. i'm not "sneaking" anything thing in. i explicitly called out these patches on the list and mentioned exactly where to find them.
Did you? In some summary message nobody is going to read?
that's crap. the whole point of the summary message is to *summarize* the patchset and give an overview of what's going on. -mike
Dear Mike Frysinger,
In message 201101121836.14803.vapier@gentoo.org you wrote:
that's crap. the whole point of the summary message is to *summarize* the patchset and give an overview of what's going on.
Right. But (links to) patches are NOT posted in a summary message but sperately, with appropriate subject and full commit message. And a link to some git repo is NOT accepted.
Please (re-) read http://www.denx.de/wiki/U-Boot/Patches
Best regards,
Wolfgang Denk
On Wednesday, January 12, 2011 18:47:53 Wolfgang Denk wrote:
Mike Frysinger wrote:
that's crap. the whole point of the summary message is to *summarize* the patchset and give an overview of what's going on.
Right. But (links to) patches are NOT posted in a summary message but sperately, with appropriate subject and full commit message. And a link to some git repo is NOT accepted.
Please (re-) read http://www.denx.de/wiki/U-Boot/Patches
you mean re-read after you just updated it to ban things i was doing -mike
Dear Mike Frysinger,
In message 201101121808.17659.vapier@gentoo.org you wrote:
stop making crap up. i'm not "sneaking" anything thing in. i explicitly called out these patches on the list and mentioned exactly where to find them.
Actually I can see absolutely no good reason for not posting these patches. As far as I can tell, none of them exceeds the ML's hard size limit.
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de The main thing is the play itself. I swear that greed for money has nothing to do with it, although heaven knows I am sorely in need of money. - Feodor Dostoyevsky
On Wednesday, January 12, 2011 18:32:36 Wolfgang Denk wrote:
Mike Frysinger wrote:
stop making crap up. i'm not "sneaking" anything thing in. i explicitly called out these patches on the list and mentioned exactly where to find them.
Actually I can see absolutely no good reason for not posting these patches. As far as I can tell, none of them exceeds the ML's hard size limit.
i dont know what you're looking at, but you're mistaken. i explicitly got rejection notices about being too big. they're each 250+ KiB. -mike
Dear Mike Frysinger,
In message 201101121837.43007.vapier@gentoo.org you wrote:
Actually I can see absolutely no good reason for not posting these patches. As far as I can tell, none of them exceeds the ML's hard size limit.
i dont know what you're looking at, but you're mistaken. i explicitly got rejection notices about being too big. they're each 250+ KiB.
I was looking at your repo.
The ML soft limit is 100 KiB, the hard limit is 400 KiB.
As I wrote: no reason at all not to post them (except that they need cleanup, for example because of exceeding max line length, or using incorrect multiline comments etc.).
Best regards,
Wolfgang Denk
Dear Mike Frysinger,
In message 1294636905-30832-1-git-send-email-vapier@gentoo.org you wrote:
The following changes since commit 89c95f0cd3f8140f3b8a82a22a6a144c148d09c6:
asm-offsets: generate bd_t size (2011-01-09 18:08:20 +0100)
are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git master
See previous message. Not pulled either.
Best regards,
Wolfgang Denk
On Wednesday, January 12, 2011 17:44:18 Wolfgang Denk wrote:
Mike Frysinger wrote:
The following changes since commit
89c95f0cd3f8140f3b8a82a22a6a144c148d09c6:
asm-offsets: generate bd_t size (2011-01-09 18:08:20 +0100)
are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git master
See previous message. Not pulled either.
you replied to the same e-mail twice -mike
Dear Mike Frysinger,
In message 201101121750.37504.vapier@gentoo.org you wrote:
See previous message. Not pulled either.
you replied to the same e-mail twice
Sorry, I somehow had a duplicated message in my folder.
Best regards,
Wolfgang Denk
participants (2)
-
Mike Frysinger -
Wolfgang Denk