Following the recommendation of adding '#define DEBUG' at the top of drivers/core/lists.c does not cause the debug messages to be shown. Change it to '#define LOG_DEBUG' instead, which actually makes it work as per doc/README.log.

While at it, provide the full path to lists.c to in order to make the instructions clearer.

Signed-off-by: Fabio Estevam festevam@gmail.com --- doc/driver-model/debugging.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/doc/driver-model/debugging.rst b/doc/driver-model/debugging.rst index 4f4a8d4805..c59bf6763b 100644 --- a/doc/driver-model/debugging.rst +++ b/doc/driver-model/debugging.rst @@ -58,5 +58,5 @@ If you are using of-platdata (e.g. CONFIG_SPL_OF_PLATDATA), check that the driver name is the same as the first compatible string in the device tree (with invalid-variable characters converted to underscore).

-If you are really stuck, #define DEBUG at the top of lists.c should show you -what is going on. +If you are really stuck, putting '#define LOG_DEBUG' at the top of +drivers/core/lists.c should show you what is going on.