From: Tien Fong Chee tien.fong.chee@intel.com

Only DDR and clock changes in N5X compare with existing SOC64 devices, so a common SOC64 env setting can be used in N5X.

Signed-off-by: Tien Fong Chee tien.fong.chee@intel.com Signed-off-by: Jit Loon Lim jit.loon.lim@intel.com --- include/configs/socfpga_n5x_socdk.h | 33 ----------------------------- 1 file changed, 33 deletions(-)

diff --git a/include/configs/socfpga_n5x_socdk.h b/include/configs/socfpga_n5x_socdk.h index c295e91e3d..4929705259 100644 --- a/include/configs/socfpga_n5x_socdk.h +++ b/include/configs/socfpga_n5x_socdk.h @@ -9,37 +9,4 @@

#include <configs/socfpga_soc64_common.h>

-#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "bootfile=" CONFIG_BOOTFILE "\0" \ - "fdt_addr=1100000\0" \ - "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "booti ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootfile};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "mmcfitboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "bootm ${loadaddr}\0" \ - "mmcfitload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootfile}\0" \ - "ramboot=setenv bootargs " CONFIG_BOOTARGS";" \ - "booti ${loadaddr} - ${fdt_addr}\0" \ - "linux_qspi_enable=if sf probe; then " \ - "echo Enabling QSPI at Linux DTB...;" \ - "fdt addr ${fdt_addr}; fdt resize;" \ - "fdt set /soc/spi@ff8d2000 status okay;" \ - "if fdt set /soc/clocks/qspi-clk clock-frequency" \ - " ${qspi_clock}; then" \ - " else fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency" \ - " ${qspi_clock}; fi; fi\0" \ - "scriptaddr=0x02100000\0" \ - "scriptfile=u-boot.scr\0" \ - "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \ - "then source ${scriptaddr}; fi\0" - #endif /* __CONFIG_SOCFGPA_N5X_H__ */