The kwboot program boots boards based on Marvell's Kirkwood platform via Xmodem over their integrated UART.

Signed-off-by: Daniel Stodden daniel.stodden@googlemail.com Acked-by: Luka Perkov uboot@lukaperkov.net Tested-By: Holger Brunck holger.brunck@keymile.com Tested-By: David Purdy david.c.purdy@gmail.com Tested-by: Simon Guinot simon.guinot@sequanux.org ---

Changes from version 2:

* fix timeouts in kwboot_tty_recv * revert indentation on manpage * on manpage note that TTY isn't optional * add David and Luka into the manpage

Changes from version v1: * fix man page * minor cosmetic fixes in tools/kwboot.c

I'm resending this patch because original version 3 was not following patch submission guidlines.

doc/kwboot.1 | 84 +++++++ tools/Makefile | 6 + tools/kwboot.c | 742 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 832 insertions(+)

diff --git a/doc/kwboot.1 b/doc/kwboot.1 new file mode 100644 index 0000000..ed08398 --- /dev/null +++ b/doc/kwboot.1 @@ -0,0 +1,84 @@ +.TH KWBOOT 1 "2012-05-19" + +.SH NAME +kwboot - Boot Marvell Kirkwood SoCs over a serial link. +.SH SYNOPSIS +.B kwboot +.RB [ "-b \fIimage\fP" ] +.RB [ "-p" ] +.RB [ "-t" ] +.RB [ "-B \fIbaudrate\fP" ] +.RB \fITTY\fP +.SH "DESCRIPTION" + +The \fBmkimage\fP program boots boards based on Marvell's Kirkwood +platform over their integrated UART. Boot image files will typically +contain a second stage boot loader, such as U-Boot. The image file +must conform to Marvell's BootROM firmware image format +(\fIkwbimage\fP), created using a tool such as \fBmkimage\fP. + +Following power-up or a system reset, system BootROM code polls the +UART for a brief period of time, sensing a handshake message which +initiates an image upload. This program sends this boot message until +it receives a positive acknowledgement. The image is transfered using +Xmodem. + +Additionally, this program implements a minimal terminal mode, which +can be used either standalone, or entered immediately following boot +image transfer completion. This is often useful to catch early boot +messages, or to manually interrupt a default boot procedure performed +by the second-stage loader. + +.SH "OPTIONS" + +.TP +.BI "-b \fIimage\fP" +Handshake; then upload file \fIimage\fP over \fITTY\fP. + +Note that for the encapsulated boot code to be executed, \fIimage\fP +must be of type "UART boot" (0x69). Boot images of different types, +such as backup images of vendor firmware downloaded from flash memory +(type 0x8B), will not work (or not as expected). See \fB-p\fP for a +workaround. + +This mode writes handshake status and upload progress indication to +stdout. + +.TP +.BI "-p" +In combination with \fB-b\fP, patches the header in \fIimage\fP prior +to upload, to "UART boot" type. + +This option attempts on-the-fly conversion of some none-UART image +types, such as images which were originally formatted to be stored in +flash memory. + +Conversion is performed in memory. The contents of \fIimage\fP will +not be altered. + +.TP +.BI "-t" +Run a terminal program, connecting standard input and output to +.RB \fITTY\fP. + +If used in combination with \fB-b\fP, terminal mode is entered +immediately following a successful image upload. + +If standard I/O streams connect to a console, this mode will terminate +after receiving 'ctrl-\' followed by 'c' from console input. + +.TP +.BI "-B \fIbaudrate\fP" +Adjust the baud rate on \fITTY\fP. Default rate is 115200. + +.SH "SEE ALSO" +.PP +\fBmkimage\fP(1) + +.SH "AUTHORS" + +Daniel Stodden daniel.stodden@gmail.com +.br +Luka Perkov uboot@lukaperkov.net +.br +David Purdy david.c.purdy@gmail.com diff --git a/tools/Makefile b/tools/Makefile index 8993fdd..8097d95 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -72,6 +72,7 @@ BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) +BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX)

# Source files which exist outside the tools directory EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o @@ -101,6 +102,7 @@ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o NOPED_OBJ_FILES-y += os_support.o OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o NOPED_OBJ_FILES-y += ublimage.o +OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o

# Don't build by default #ifeq ($(ARCH),ppc) @@ -234,6 +236,10 @@ $(obj)ncb$(SFX): $(obj)ncb.o $(obj)ubsha1$(SFX): $(obj)os_support.o $(obj)sha1.o $(obj)ubsha1.o $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^

+$(obj)kwboot$(SFX): $(obj)kwboot.o + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ + # Some of the tool objects need to be accessed from outside the tools directory $(obj)%.o: $(SRCTREE)/common/%.c $(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< diff --git a/tools/kwboot.c b/tools/kwboot.c new file mode 100644 index 0000000..e773f01 --- /dev/null +++ b/tools/kwboot.c @@ -0,0 +1,742 @@ +/* + * Boot a Marvell Kirkwood SoC, with Xmodem over UART0. + * + * (c) 2012 Daniel Stodden daniel.stodden@gmail.com + * + * References: marvell.com, "88F6180, 88F6190, 88F6192, and 88F6281 + * Integrated Controller: Functional Specifications" December 2, + * 2008. Chapter 24.2 "BootROM Firmware". + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <stdarg.h> +#include <libgen.h> +#include <fcntl.h> +#include <errno.h> +#include <unistd.h> +#include <stdint.h> +#include <termios.h> +#include <sys/mman.h> +#include <sys/stat.h> + +#include "kwbimage.h" + +#ifdef __GNUC__ +#define PACKED __attribute((packed)) +#else +#define PACKED +#endif + +/* + * Marvell BootROM UART Sensing + */ + +static unsigned char kwboot_msg_boot[] = { + 0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 +}; + +#define KWBOOT_MSG_REQ_DELAY 10 /* ms */ +#define KWBOOT_MSG_RSP_TIMEO 50 /* ms */ + +/* + * Xmodem Transfers + */ + +#define SOH 1 /* sender start of block header */ +#define EOT 4 /* sender end of block transfer */ +#define ACK 6 /* target block ack */ +#define NAK 21 /* target block negative ack */ +#define CAN 24 /* target/sender transfer cancellation */ + +struct kwboot_block { + uint8_t soh; + uint8_t pnum; + uint8_t _pnum; + uint8_t data[128]; + uint8_t csum; +} PACKED; + +#define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */ + +static int kwboot_verbose; + +static void +kwboot_printv(const char *fmt, ...) +{ + va_list ap; + + if (kwboot_verbose) { + va_start(ap, fmt); + vprintf(fmt, ap); + va_end(ap); + fflush(stdout); + } +} + +static void +__spinner(void) +{ + const char seq[] = { '-', '\', '|', '/' }; + const int div = 8; + static int state, bs; + + if (state % div == 0) { + fputc(bs, stdout); + fputc(seq[state / div % sizeof(seq)], stdout); + fflush(stdout); + } + + bs = '\b'; + state++; +} + +static void +kwboot_spinner(void) +{ + if (kwboot_verbose) + __spinner(); +} + +static void +__progress(int pct, char c) +{ + const int width = 70; + static const char *nl = ""; + static int pos; + + if (pos % width == 0) + printf("%s%3d %% [", nl, pct); + + fputc(c, stdout); + + nl = "]\n"; + pos++; + + if (pct == 100) { + while (pos++ < width) + fputc(' ', stdout); + fputs(nl, stdout); + } + + fflush(stdout); + +} + +static void +kwboot_progress(int _pct, char c) +{ + static int pct; + + if (_pct != -1) + pct = _pct; + + if (kwboot_verbose) + __progress(pct, c); +} + +static int +kwboot_tty_recv(int fd, void *buf, size_t len, int timeo) +{ + int rc, nfds; + fd_set rfds; + struct timeval tv; + ssize_t n; + + rc = -1; + + FD_ZERO(&rfds); + FD_SET(fd, &rfds); + + tv.tv_sec = 0; + tv.tv_usec = timeo * 1000; + if (tv.tv_usec > 1000000) { + tv.tv_sec += tv.tv_usec / 1000000; + tv.tv_usec %= 1000000; + } + + do { + nfds = select(fd + 1, &rfds, NULL, NULL, &tv); + if (nfds < 0) + goto out; + if (!nfds) { + errno = ETIMEDOUT; + goto out; + } + + n = read(fd, buf, len); + if (n < 0) + goto out; + + buf = (char *)buf + n; + len -= n; + } while (len > 0); + + rc = 0; +out: + return rc; +} + +static int +kwboot_tty_send(int fd, const void *buf, size_t len) +{ + int rc; + ssize_t n; + + rc = -1; + + do { + n = write(fd, buf, len); + if (n < 0) + goto out; + + buf = (char *)buf + n; + len -= n; + } while (len > 0); + + rc = tcdrain(fd); +out: + return rc; +} + +static int +kwboot_tty_send_char(int fd, unsigned char c) +{ + return kwboot_tty_send(fd, &c, 1); +} + +static speed_t +kwboot_tty_speed(int baudrate) +{ + switch (baudrate) { + case 115200: + return B115200; + case 57600: + return B57600; + case 38400: + return B38400; + case 19200: + return B19200; + case 9600: + return B9600; + } + + return -1; +} + +static int +kwboot_open_tty(const char *path, speed_t speed) +{ + int rc, fd; + struct termios tio; + + rc = -1; + + fd = open(path, O_RDWR|O_NOCTTY|O_NDELAY); + if (fd < 0) + goto out; + + memset(&tio, 0, sizeof(tio)); + + tio.c_iflag = 0; + tio.c_cflag = CREAD|CLOCAL|CS8; + + tio.c_cc[VMIN] = 1; + tio.c_cc[VTIME] = 10; + + cfsetospeed(&tio, speed); + cfsetispeed(&tio, speed); + + rc = tcsetattr(fd, TCSANOW, &tio); + if (rc) + goto out; + + rc = fd; +out: + if (rc < 0) { + if (fd >= 0) + close(fd); + } + + return rc; +} + +static int +kwboot_bootmsg(int tty, void *msg) +{ + int rc; + char c; + + kwboot_printv("Sending boot message. Please reboot the target..."); + + do { + rc = tcflush(tty, TCIOFLUSH); + if (rc) + break; + + rc = kwboot_tty_send(tty, msg, 8); + if (rc) { + usleep(KWBOOT_MSG_REQ_DELAY * 1000); + continue; + } + + rc = kwboot_tty_recv(tty, &c, 1, KWBOOT_MSG_RSP_TIMEO); + + kwboot_spinner(); + + } while (rc || c != NAK); + + kwboot_printv("\n"); + + return rc; +} + +static int +kwboot_xm_makeblock(struct kwboot_block *block, const void *data, + size_t size, int pnum) +{ + const size_t blksz = sizeof(block->data); + size_t n; + int i; + + block->pnum = pnum; + block->_pnum = ~block->pnum; + + n = size < blksz ? size : blksz; + memcpy(&block->data[0], data, n); + memset(&block->data[n], 0, blksz - n); + + block->csum = 0; + for (i = 0; i < n; i++) + block->csum += block->data[i]; + + return n; +} + +static int +kwboot_xm_sendblock(int fd, struct kwboot_block *block) +{ + int rc, retries; + char c; + + retries = 16; + do { + rc = kwboot_tty_send(fd, block, sizeof(*block)); + if (rc) + break; + + rc = kwboot_tty_recv(fd, &c, 1, KWBOOT_BLK_RSP_TIMEO); + if (rc) + break; + + if (c != ACK) + kwboot_progress(-1, '+'); + + } while (c == NAK && retries-- > 0); + + rc = -1; + + switch (c) { + case ACK: + rc = 0; + break; + case NAK: + errno = EBADMSG; + break; + case CAN: + errno = ECANCELED; + break; + default: + errno = EPROTO; + break; + } + + return rc; +} + +static int +kwboot_xmodem(int tty, const void *_data, size_t size) +{ + const uint8_t *data = _data; + int rc, pnum, N, err; + + pnum = 1; + N = 0; + + kwboot_printv("Sending boot image...\n"); + + do { + struct kwboot_block block; + int n; + + n = kwboot_xm_makeblock(&block, + data + N, size - N, + pnum++); + if (n < 0) + goto can; + + if (!n) + break; + + rc = kwboot_xm_sendblock(tty, &block); + if (rc) + goto out; + + N += n; + kwboot_progress(N * 100 / size, '.'); + } while (1); + + rc = kwboot_tty_send_char(tty, EOT); + +out: + return rc; + +can: + err = errno; + kwboot_tty_send_char(tty, CAN); + errno = err; + goto out; +} + +static int +kwboot_term_pipe(int in, int out, char *quit, int *s) +{ + ssize_t nin, nout; + char _buf[128], *buf = _buf; + + nin = read(in, buf, sizeof(buf)); + if (nin < 0) + return -1; + + if (quit) { + int i; + + for (i = 0; i < nin; i++) { + if (*buf == quit[*s]) { + (*s)++; + if (!quit[*s]) + return 0; + buf++; + nin--; + } else + while (*s > 0) { + nout = write(out, quit, *s); + if (nout <= 0) + return -1; + (*s) -= nout; + } + } + } + + while (nin > 0) { + nout = write(out, buf, nin); + if (nout <= 0) + return -1; + nin -= nout; + } + + return 0; +} + +static int +kwboot_terminal(int tty) +{ + int rc, in, s; + char *quit = "\34c"; + struct termios otio, tio; + + rc = -1; + + in = STDIN_FILENO; + if (isatty(in)) { + rc = tcgetattr(in, &otio); + if (!rc) { + tio = otio; + cfmakeraw(&tio); + rc = tcsetattr(in, TCSANOW, &tio); + } + if (rc) { + perror("tcsetattr"); + goto out; + } + + kwboot_printv("[Type Ctrl-%c + %c to quit]\r\n", + quit[0]|0100, quit[1]); + } else + in = -1; + + rc = 0; + s = 0; + + do { + fd_set rfds; + int nfds = 0; + + FD_SET(tty, &rfds); + nfds = nfds < tty ? tty : nfds; + + if (in >= 0) { + FD_SET(in, &rfds); + nfds = nfds < in ? in : nfds; + } + + nfds = select(nfds + 1, &rfds, NULL, NULL, NULL); + if (nfds < 0) + break; + + if (FD_ISSET(tty, &rfds)) { + rc = kwboot_term_pipe(tty, STDOUT_FILENO, NULL, NULL); + if (rc) + break; + } + + if (FD_ISSET(in, &rfds)) { + rc = kwboot_term_pipe(in, tty, quit, &s); + if (rc) + break; + } + } while (quit[s] != 0); + + tcsetattr(in, TCSANOW, &otio); +out: + return rc; +} + +static void * +kwboot_mmap_image(const char *path, size_t *size, int prot) +{ + int rc, fd, flags; + struct stat st; + void *img; + + rc = -1; + fd = -1; + img = NULL; + + fd = open(path, O_RDONLY); + if (fd < 0) + goto out; + + rc = fstat(fd, &st); + if (rc) + goto out; + + flags = (prot & PROT_WRITE) ? MAP_PRIVATE : MAP_SHARED; + + img = mmap(NULL, st.st_size, prot, flags, fd, 0); + if (img == MAP_FAILED) { + img = NULL; + goto out; + } + + rc = 0; + *size = st.st_size; +out: + if (rc && img) { + munmap(img, st.st_size); + img = NULL; + } + if (fd >= 0) + close(fd); + + return img; +} + +static uint8_t +kwboot_img_csum8(void *_data, size_t size) +{ + uint8_t *data = _data, csum; + + for (csum = 0; size-- > 0; data++) + csum += *data; + + return csum; +} + +static int +kwboot_img_patch_hdr(void *img, size_t size) +{ + int rc; + bhr_t *hdr; + uint8_t csum; + const size_t hdrsz = sizeof(*hdr); + + rc = -1; + hdr = img; + + if (size < hdrsz) { + errno = EINVAL; + goto out; + } + + csum = kwboot_img_csum8(hdr, hdrsz) - hdr->checkSum; + if (csum != hdr->checkSum) { + errno = EINVAL; + goto out; + } + + if (hdr->blockid == IBR_HDR_UART_ID) { + rc = 0; + goto out; + } + + hdr->blockid = IBR_HDR_UART_ID; + + hdr->nandeccmode = IBR_HDR_ECC_DISABLED; + hdr->nandpagesize = 0; + + hdr->srcaddr = hdr->ext + ? sizeof(struct kwb_header) + : sizeof(*hdr); + + hdr->checkSum = kwboot_img_csum8(hdr, hdrsz) - csum; + + rc = 0; +out: + return rc; +} + +static void +kwboot_usage(FILE *stream, char *progname) +{ + fprintf(stream, + "Usage: %s -b <image> [ -p ] [ -t ] " + "[-B <baud> ] <TTY>\n", progname); + fprintf(stream, "\n"); + fprintf(stream, " -b <image>: boot <image>\n"); + fprintf(stream, " -p: patch <image> to type 0x69 (uart boot)\n"); + fprintf(stream, "\n"); + fprintf(stream, " -t: mini terminal\n"); + fprintf(stream, "\n"); + fprintf(stream, " -B <baud>: set baud rate\n"); + fprintf(stream, "\n"); +} + +int +main(int argc, char **argv) +{ + const char *ttypath, *imgpath; + int rv, rc, tty, term, prot, patch; + void *bootmsg; + void *img; + size_t size; + speed_t speed; + + rv = 1; + tty = -1; + bootmsg = NULL; + imgpath = NULL; + img = NULL; + term = 0; + patch = 0; + size = 0; + speed = B115200; + + kwboot_verbose = isatty(STDOUT_FILENO); + + do { + int c = getopt(argc, argv, "hb:ptB:"); + if (c < 0) + break; + + switch (c) { + case 'b': + bootmsg = kwboot_msg_boot; + imgpath = optarg; + break; + + case 'p': + patch = 1; + break; + + case 't': + term = 1; + break; + + case 'B': + speed = kwboot_tty_speed(atoi(optarg)); + if (speed == -1) + goto usage; + break; + + case 'h': + rv = 0; + default: + goto usage; + } + } while (1); + + if (!bootmsg && !term) + goto usage; + + if (patch && !imgpath) + goto usage; + + if (argc - optind < 1) + goto usage; + + ttypath = argv[optind++]; + + tty = kwboot_open_tty(ttypath, speed); + if (tty < 0) { + perror(ttypath); + goto out; + } + + if (imgpath) { + prot = PROT_READ | (patch ? PROT_WRITE : 0); + + img = kwboot_mmap_image(imgpath, &size, prot); + if (!img) { + perror(imgpath); + goto out; + } + } + + if (patch) { + rc = kwboot_img_patch_hdr(img, size); + if (rc) { + fprintf(stderr, "%s: Invalid image.\n", imgpath); + goto out; + } + } + + if (bootmsg) { + rc = kwboot_bootmsg(tty, bootmsg); + if (rc) { + perror("bootmsg"); + goto out; + } + } + + if (img) { + rc = kwboot_xmodem(tty, img, size); + if (rc) { + perror("xmodem"); + goto out; + } + } + + if (term) { + rc = kwboot_terminal(tty); + if (rc && !(errno == EINTR)) { + perror("terminal"); + goto out; + } + } + + rv = 0; +out: + if (tty >= 0) + close(tty); + + if (img) + munmap(img, size); + + return rv; + +usage: + kwboot_usage(rv ? stderr : stdout, basename(argv[0])); + goto out; +}