Because mxs_nand_spl driver does not support DM, to use the minimum ECC layout, it needs to handle the CONFIG_NAND_MXS_USE_MINIMUM_ECC.

Signed-off-by: Ye Li ye.li@nxp.com Reviewed-by: Han Xu han.xu@nxp.com --- Changes in v2: - Use IS_ENABLED to replace #ifdef

drivers/mtd/nand/raw/mxs_nand.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c index ee5d7fd..0c4e559 100644 --- a/drivers/mtd/nand/raw/mxs_nand.c +++ b/drivers/mtd/nand/raw/mxs_nand.c @@ -1380,6 +1380,9 @@ int mxs_nand_init_spl(struct nand_chip *nand) else nand_info->max_ecc_strength_supported = 40;

+ if (IS_ENABLED(CONFIG_NAND_MXS_USE_MINIMUM_ECC)) + nand_info->use_minimum_ecc = true; + err = mxs_nand_alloc_buffers(nand_info); if (err) return err;