From: Gabe Black gabeblack@chromium.org

We don't want this for coreboot, so provide a way of compiling it out.

Signed-off-by: Gabe Black gabeblack@chromium.org Signed-off-by: Stefan Reinauer reinauer@chromium.org Signed-off-by: Simon Glass sjg@chromium.org --- Changes in v3: - Check for CONFIG_X86_NO_REAL_MODE in the zimage code

Changes in v2: - Rename real mode option to CONFIG_X86_NO_REAL_MODE

README | 6 ++++++ arch/x86/lib/Makefile | 9 ++++++--- arch/x86/lib/video.c | 2 ++ arch/x86/lib/zimage.c | 4 ++-- 4 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/README b/README index b9a3685..ed7d270 100644 --- a/README +++ b/README @@ -3668,6 +3668,12 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is excluded. You will need to do this when U-Boot is running from Coreboot.

+- CONFIG_X86_NO_REAL_MODE + If defined, x86 real mode code is omitted. This assumes a + 32-bit environment where such code is not needed. You will + need to do this when U-Boot is running from Coreboot. + + Freescale QE/FMAN Firmware Support: -----------------------------------

diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 51836da..4325b25 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -25,11 +25,16 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib$(ARCH).o

+ifeq ($(CONFIG_X86_NO_REAL_MODE),) SOBJS-$(CONFIG_SYS_PC_BIOS) += bios.o SOBJS-$(CONFIG_SYS_PCI_BIOS) += bios_pci.o -SOBJS-$(CONFIG_SYS_X86_REALMODE) += realmode_switch.o +COBJS-y += realmode.o +SOBJS-y += realmode_switch.o

COBJS-$(CONFIG_SYS_PC_BIOS) += bios_setup.o +COBJS-$(CONFIG_VIDEO) += video_bios.o +endif + COBJS-y += board.o COBJS-y += bootm.o COBJS-y += cmd_boot.o @@ -41,11 +46,9 @@ COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_PCI) += pci_type1.o -COBJS-$(CONFIG_SYS_X86_REALMODE) += realmode.o COBJS-y += relocate.o COBJS-y += string.o COBJS-$(CONFIG_SYS_X86_ISR_TIMER) += timer.o -COBJS-$(CONFIG_VIDEO) += video_bios.o COBJS-$(CONFIG_VIDEO) += video.o COBJS-$(CONFIG_CMD_ZBOOT) += zimage.o

diff --git a/arch/x86/lib/video.c b/arch/x86/lib/video.c index 3d6b24d..20e2416 100644 --- a/arch/x86/lib/video.c +++ b/arch/x86/lib/video.c @@ -222,8 +222,10 @@ int video_init(void)

int drv_video_init(void) { +#ifndef CONFIG_X86_NO_REAL_MODE if (video_bios_init()) return 1; +#endif

return video_init(); } diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 2214286..b8c672b 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -171,7 +171,7 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size, else *load_address = (void *)ZIMAGE_LOAD_ADDR;

-#if defined CONFIG_ZBOOT_32 +#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE) printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base); memset(setup_base, 0, sizeof(*setup_base)); setup_base->hdr = params->hdr; @@ -237,7 +237,7 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, struct setup_header *hdr = &setup_base->hdr; int bootproto = get_boot_protocol(hdr);

-#if defined CONFIG_ZBOOT_32 +#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE) setup_base->e820_entries = install_e820_map( ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); #endif