[U-Boot] [PATCH] fix address of error message in mtest command

From: David Feng fenghua@phytium.com.cn
This patch deal with error message of mtest command. When test failed, the mtest command will output error information that include memory address and value. But the address field is not correct or misleading.
Signed-off-by: David Feng fenghua@phytium.com.cn --- common/cmd_mem.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/common/cmd_mem.c b/common/cmd_mem.c index c3aab3d..8d2cfc8 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -746,7 +746,8 @@ static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr, if (temp != pattern) { printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:" " expected 0x%.8lx, actual 0x%.8lx\n", - start_addr + offset, pattern, temp); + start_addr + offset*sizeof(vu_long), + pattern, temp); errs++; if (ctrlc()) return -1; @@ -767,7 +768,8 @@ static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr, printf("\nFAILURE: Address bit stuck low or" " shorted @ 0x%.8lx: expected 0x%.8lx," " actual 0x%.8lx\n", - start_addr + offset, pattern, temp); + start_addr + offset*sizeof(vu_long), + pattern, temp); errs++; if (ctrlc()) return -1; @@ -807,7 +809,8 @@ static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr, if (temp != pattern) { printf("\nFAILURE (read/write) @ 0x%.8lx:" " expected 0x%.8lx, actual 0x%.8lx)\n", - start_addr + offset, pattern, temp); + start_addr + offset*sizeof(vu_long), + pattern, temp); errs++; if (ctrlc()) return -1; @@ -827,7 +830,8 @@ static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr, if (temp != anti_pattern) { printf("\nFAILURE (read/write): @ 0x%.8lx:" " expected 0x%.8lx, actual 0x%.8lx)\n", - start_addr + offset, anti_pattern, temp); + start_addr + offset*sizeof(vu_long), + anti_pattern, temp); errs++; if (ctrlc()) return -1; @@ -885,7 +889,7 @@ static ulong mem_test_quick(vu_long *buf, ulong start_addr, ulong end_addr,
printf("\nMem error @ 0x%08X: " "found %08lX, expected %08lX\n", - (uint)(uintptr_t)(start_addr + offset), + (uint)(uintptr_t)(start_addr + offset*sizeof(vu_long)), readback, val); errs++; if (ctrlc())

On Wed, Feb 12, 2014 at 04:10:08PM +0800, fenghua@phytium.com.cn wrote:
From: David Feng fenghua@phytium.com.cn
This patch deal with error message of mtest command. When test failed, the mtest command will output error information that include memory address and value. But the address field is not correct or misleading.
Signed-off-by: David Feng fenghua@phytium.com.cn
Applied to u-boot/master, thanks!
participants (2)
-
fenghua@phytium.com.cn
-
Tom Rini