This driver uses the CONFIG namespace to set the chips internal CONFIG namespace related bits. However, CONFIG is reserved for the top-level Kconfig based configuration system. Use CFG as the namespace here instead to avoid pollution.

Signed-off-by: Tom Rini trini@konsulko.com --- drivers/mtd/nand/raw/vf610_nfc.c | 54 ++++++++++++++++---------------- 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c index e33953ec7c64..13fd631cb402 100644 --- a/drivers/mtd/nand/raw/vf610_nfc.c +++ b/drivers/mtd/nand/raw/vf610_nfc.c @@ -109,19 +109,19 @@ #define STATUS_BYTE1_MASK 0x000000FF

/* NFC_FLASH_CONFIG Field */ -#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000 -#define CONFIG_ECC_SRAM_ADDR_SHIFT 22 -#define CONFIG_ECC_SRAM_REQ_BIT (1<<21) -#define CONFIG_DMA_REQ_BIT (1<<20) -#define CONFIG_ECC_MODE_MASK 0x000E0000 -#define CONFIG_ECC_MODE_SHIFT 17 -#define CONFIG_FAST_FLASH_BIT (1<<16) -#define CONFIG_16BIT (1<<7) -#define CONFIG_BOOT_MODE_BIT (1<<6) -#define CONFIG_ADDR_AUTO_INCR_BIT (1<<5) -#define CONFIG_BUFNO_AUTO_INCR_BIT (1<<4) -#define CONFIG_PAGE_CNT_MASK 0xF -#define CONFIG_PAGE_CNT_SHIFT 0 +#define CFG_ECC_SRAM_ADDR_MASK 0x7FC00000 +#define CFG_ECC_SRAM_ADDR_SHIFT 22 +#define CFG_ECC_SRAM_REQ_BIT (1<<21) +#define CFG_DMA_REQ_BIT (1<<20) +#define CFG_ECC_MODE_MASK 0x000E0000 +#define CFG_ECC_MODE_SHIFT 17 +#define CFG_FAST_FLASH_BIT (1<<16) +#define CFG_16BIT (1<<7) +#define CFG_BOOT_MODE_BIT (1<<6) +#define CFG_ADDR_AUTO_INCR_BIT (1<<5) +#define CFG_BUFNO_AUTO_INCR_BIT (1<<4) +#define CFG_PAGE_CNT_MASK 0xF +#define CFG_PAGE_CNT_SHIFT 0

/* NFC_IRQ_STATUS Field */ #define IDLE_IRQ_BIT (1<<29) @@ -342,8 +342,8 @@ static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page) static inline void vf610_nfc_ecc_mode(struct mtd_info *mtd, int ecc_mode) { vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, - CONFIG_ECC_MODE_MASK, - CONFIG_ECC_MODE_SHIFT, ecc_mode); + CFG_ECC_MODE_MASK, + CFG_ECC_MODE_SHIFT, ecc_mode); }

static inline void vf610_nfc_transfer_size(void __iomem *regbase, int size) @@ -666,16 +666,16 @@ static int vf610_nfc_nand_init(struct vf610_nfc *nfc, int devnum) chip->ecc.size = PAGE_2K;

/* Set configuration register. */ - vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); - vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT); - vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT); - vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT); - vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT); - vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CFG_16BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CFG_ADDR_AUTO_INCR_BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CFG_BUFNO_AUTO_INCR_BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CFG_BOOT_MODE_BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CFG_DMA_REQ_BIT); + vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CFG_FAST_FLASH_BIT);

/* Disable virtual pages, only one elementary transfer unit */ - vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK, - CONFIG_PAGE_CNT_SHIFT, 1); + vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, CFG_PAGE_CNT_MASK, + CFG_PAGE_CNT_SHIFT, 1);

/* first scan to find the device and get the page size */ if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL)) { @@ -684,7 +684,7 @@ static int vf610_nfc_nand_init(struct vf610_nfc *nfc, int devnum) }

if (cfg.width == 16) - vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); + vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CFG_16BIT);

/* Bad block options. */ if (cfg.flash_bbt) @@ -734,12 +734,12 @@ static int vf610_nfc_nand_init(struct vf610_nfc *nfc, int devnum)

/* Set ECC_STATUS offset */ vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, - CONFIG_ECC_SRAM_ADDR_MASK, - CONFIG_ECC_SRAM_ADDR_SHIFT, + CFG_ECC_SRAM_ADDR_MASK, + CFG_ECC_SRAM_ADDR_SHIFT, ECC_SRAM_ADDR >> 3);

/* Enable ECC status in SRAM */ - vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT); + vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CFG_ECC_SRAM_REQ_BIT); }

/* second phase scan */